Nozomu Adachi - My portal

Profile Information

Affiliation: Toyohashi University of Technology

Degree: 博士（工学）(豊橋技術科学大学)

J-GLOBAL ID: 201601010379067017
researchmap Member ID: B000250818

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine materials and mechanics /

Research History

Oct, 2022 - Present

Graduate School of Engineering Department of Mechanical Engineering, Toyohashi University of Technology
Mar, 2017 - Sep, 2022

Graduate School of Engineering Department of Mechanical Engineering, Toyohashi University of Technology
Aug, 2016 - Feb, 2017

特任助教, 粒子線基礎物性研究部門, 京都大学原子炉実験所
Jun, 2016 - Aug, 2016

研究員, 粒子線基礎物性研究部門, 京都大学原子炉実験所

Papers

Comparative analysis of nanoindentation-induced incipient deformation of zirconium-based bulk metallic glass in various structural states

Silvia Pomes, Nozomu Adachi, Masato Wakeda, Takahito Ohmura

Intermetallics, 168 108269-108269, May, 2024 Peer-reviewed
Temperature Dependence of Nanoindentation-induced Deformation Dynamics in Zr-based Bulk Metallic Glass

Silvia POMES, Nozomu ADACHI, Masato WAKEDA, Takahito OHMURA

Material Transactions, 2024 Peer-reviewed
Probing pre-serration deformation in Zr-based bulk metallic glass via nanoindentation testing

Silvia Pomes, Nozomu Adachi, Masato Wakeda, Takahito Ohmura

Scripta Materialia, 237 115713-115713, Dec, 2023 Peer-reviewed
Effect of annealing on the magnetic microstructure of high-pressure torsion iron: the relevance of higher-order contributions to the magnetic small-angle neutron scattering cross section

Mathias Bersweiler, Hirokazu Sato, Nozomu Adachi, Yoshikazu Todaka, Inma Peral, Joachim Kohlbrecher, Vladislav D. Zaporozhets, Konstantin L. Metlov, Andreas Michels, Yojiro Oba

IUCrJ, 10(4), May 19, 2023 Peer-reviewed
Effect of Surface Nano-crystalline Layer Formed by Heavy Plastic Deformation Process on Rolling Contact Fatigue

Nozomu Adachi, Yoshikazu Todaka, Tashika Masaki, Yoshinori Shiihara, Takuya Suzuki, Masahiro Tsukahara, Osamu Idohara

ISIJ International, 62(10) 2147-2157, Oct, 2022 Peer-reviewedLead authorCorresponding author
Deformation Texture of Bulk Cementite Investigated by Neutron Diffraction

Nozomu Adachi, Haruki Ueno, Satoshi Morooka, Pingguang Xu, Yoshikazu Todaka

Materials, 15(13) 4485-4485, Jun 25, 2022 Peer-reviewedLead authorCorresponding author
Effect of Fe Content on Steady–State Grain Size in Ni–Fe Alloys

86(3) 43-51, Mar, 2022 Peer-reviewed
Promotion Effect of Hydrogen on Grain Refinement in Pure Fe by High-Pressure Torsion: Straining

Hirokazu Sato, Nozomu Adachi, Yoshikazu Todaka, Tomohiko Omura, Koichi Sato

Metallurgical and Materials Transactions A, Sep 8, 2021 Peer-reviewed
Role of higher-order effects in spin-misalignment small-angle neutron scattering of high-pressure torsion nickel

Y. Oba, M. Bersweiler, I. Titov, N. Adachi, Y. Todaka, E. P. Gilbert, N.-J. Steinke, K. L. Metlov, A. Michels

Physical Review Materials, 5(8), Aug 24, 2021 Peer-reviewed
Effect of hetero- and homo-nanostructure on the hydrogen embrittlement resistance in heavily deformed 316LN austenitic stainless steel

F. J. Mweta, N. Adachi, Y. Todaka, H. Sato, H. Miura, M. Kobayashi, C. Watanabe, Y. Aoyagi

MRS Advances, 6(27) 682-688, Aug 11, 2021 Peer-reviewed
Analysis and Mapping of Detailed Inner Information of Crystalline Grain by Wavelength-Resolved Neutron Transmission Imaging with Individual Bragg-Dip Profile-Fitting Analysis

Yosuke Sakurai, Hirotaka Sato, Nozomu Adachi, Satoshi Morooka, Yoshikazu Todaka, Takashi Kamiyama

Applied Sciences, 11(11) 5219-5219, Jun 4, 2021 Peer-reviewed
Revealing defect-induced spin disorder in nanocrystalline Ni

Mathias Bersweiler, Evelyn Pratami Sinaga, Inma Peral, Nozomu Adachi, Philipp Bender, Nina-Juliane Steinke, Elliot Paul Gilbert, Yoshikazu Todaka, Andreas Michels, Yojiro Oba

Physical Review Materials, 5(4), Apr 20, 2021 Peer-reviewed
Increase of the mechanical response of pure aluminum by grain refinement retained with an alternative rapid sintering route

J. M. Mendoza-Duarte, F. C. Robles-Hernandez, E. Rocha-Rangel, Y. Todaka, N. Adachi, I. Estrada-Guel, C. G. Garay-Reyes, M. A. Ruiz Esparza-Rodríguez, R. Martínez-Sánchez

Journal of Materials Research, in press, Apr 9, 2021 Peer-reviewed
Macroscopic viscoelastic deformation at room temperature in mechanically rejuvenated Zr-based metallic glass

Nozomu Adachi, Yoshikazu Todaka, Takahito Ohmura

MRS Communications, Mar 9, 2021 Peer-reviewedLead authorCorresponding author
Analytical approach for pop-in and post-pop-in deformation behavior during nanoindentation: effect of solute Si in interstitial free steel

Nozomu Adachi, Takuya Suzuki, Takahito Ohmura, Yoshikazu Todaka

Journal of Materials Research, Mar 8, 2021 Peer-reviewedLead authorCorresponding author
Effect of grain boundary on the friction coefficient of pure Fe under the oil lubrication

Nozomu Adachi, Yasutaka Matsuo, Yoshikazu Todaka, Mikiya Fujimoto, Masahiro Hino, Masatoshi Mitsuhara, Yojiro Oba, Yoshinori Shiihara, Yoshitaka Umeno, Minoru Nishida

Tribology International, 155 106781-106781, Mar, 2021 Peer-reviewedLead authorCorresponding author
Effect of One-Pass Strain on Steady-State Grain Size by Cyclic - HPT Straining

Hirokazu Sato, Nozomu Adachi, Yoshikazu Todaka

Journal of the Japan Institute of Metals and Materials, 85(2) 67-74, Feb 1, 2021 Peer-reviewed
Mechanical Property Changes of Austenitic Stainless Steels by Severe Plastic Deformation and Subsequent Aging

Frank Jaksoni Mweta, Yoshikazu Todaka, Nozomu Adachi

International Symposium on Advances in Technology Education 2021: Conference proceedings, August 17th-20th, Turku, Finland, part 3, 224-224, 2021 Peer-reviewed
Hydrogen Permeation Property of Bulk Cementite

Nozomu Adachi, Haruki Ueno, Katsuhiko Onoe, Satoshi Morooka, Yoshikazu Todaka

ISIJ International, 2021 Peer-reviewedLead authorCorresponding author
Lower and Higher Friction Coefficients under Oil Lubrication Based on Microstructure Control in Steels

Yoshikazu TODAKA, Nozomu ADACHI

Journal of The Surface Finishing Society of Japan, 71(12) 756-762, Dec 1, 2020 Invited

Awards

Jun, 2021

研究発表奨励賞, 結晶粒微細化による油潤滑下摩擦係数の低減と転動疲労寿命向上, 一般社団法人日本熱処理技術協会

足立望
Nov, 2019

若手ポスター賞, ナノインデンテーションにおけるIF鋼のpop-inおよびpop-in後の変形挙動におよぼすSi添加の影響, 日本金属学会研究会 No.82 "微小領域の力学特性評価とマルチスケールモデリング"

足立望, 戸髙義一, 大村孝仁
Nov, 2017

Hiroo Seki Memorial Award, Seki Memorial Foundation for Science

Nozomu Adachi
Mar, 2015

Best Poster Presentation Award, THE JAPAN INSTITUTE OF METALS AND MATERIALS

Nozomu Adachi, Yoshikazu Todaka, Masato Ohnuma, Yojiro Oba, Joachim Kohlbrecher, Yoshinori Kawanishi, Kojiro Yamamoto, Minoru Umemoto, Yoshihiko Yokoyama
Dec, 2012

Best Poster Presentation Award, Effect of residual stress on hardness in deformed Zr50Cu40Al10 bulk glassy alloy by high-pressure torsion straining, ISAEM-2012

Nozomu Adachi

Presentations

185

微小力学応答に基づく金属ガラスの変形挙動解析

足立望

微小領域の力学特性評価とマルチスケールモデリング第5回研究集会, Aug 27, 2023 Invited
変形集合組織制御したω-Tiにおける単軸引張特性

吉田陽輝, 足立望, 諸岡聡, 徐平光, ハルヨステファヌス, 戸高義一

日本金属学会第172回春期講演大会, Mar 7, 2023
構造若返りしたZr系金属ガラスの力学応答解析

足立望, 戸高義一, 濱名亮太, 大村孝仁

日本金属学会第172回春期講演大会, Mar 7, 2023
巨大ひずみ加工・焼鈍により組織制御した純Feにおける力学応答

戸高義一, 田﨑陽斗, 岩本和樹, 足立望

日本金属学会第172回春期講演大会, Mar 7, 2023
Work-hardening Behavior of Mg-Y-Zn Alloy with Long-periodic Stacking Ordered Phase in High-pressure Torsion Process

The 5th International Symposium on Long-Period Stacking/Order Structure and Mille-feuille Structure (LPSO/MFS2022), Dec 11, 2022
鉄鋼材料の潤滑環境下における転動疲労に及ぼす結晶粒微細化の影響

足立望, 戸高義一

第32回日本MRS年次大会, Dec 7, 2022
メカニカルボールミリングにより作製したTi-Mg固溶体の結晶構造に及ぼす添加元素の影響

戸高義一, 足立望

第32回日本MRS年次大会, Dec 7, 2022
繰り返し高周波焼入れ処理した炭素鋼の油潤滑環境下における摩擦摩耗特性

宮田航英, 戸高義一, 足立望, 鈴木拓哉, 塚原真宏, 井戸原修

トライボロジー会議2022 秋, Nov 9, 2022
純Feにおける油潤滑環境下の摩擦特性に及ぼす結晶配向の影響

島野瑠翔, 宮田航英, 足立望, 戸高義一, 光原昌寿, 久保淳

トライボロジー会議2022 秋, Nov 9, 2022
バルク金属ガラスの局所力学挙動に基づく構造不均一性評価

藤井洸太, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
組織微細化制御した純 Fe における油潤滑環境下の摩擦係数に及ぼす C18 脂肪酸の分子構造の影響

野間天馬, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
ボールミリングにより作製したTi-Mg 固溶体における fcc 相の形成に及ぼす添加元素の影響

西野賢輔, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
組織制御した純 Fe における力学特性の発現機構

岩本和樹, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
HPT 加工によるLPSO 型 Mg 合金の加工硬化挙動に及ぼす加工温度の影響

大越広夢, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
純 Ti の ω 相における引張特性の結晶方位依存性

Erdenemunkh Bat Erdene, 戸高義一, 足立望

日本金属学会・日本鉄鋼協会東海支部第32回材料ﾌｫｰﾗﾑTOKAI, Nov 7, 2022
高圧下ねじり加工した鉄内部のスピンミスアライメントの磁場依存性

大場洋次郎, 足立望, 廣井孝介, 戸高義一

第22回日本中性子科学会年会(JSNS2022), Oct 26, 2022
Ti-Mg固溶体の結晶構造に及ぼす添加元素の影響

原輝, 西野賢輔, 足立望, 戸高義一

日本鉄鋼協会第184回秋季講演大会, Sep 21, 2022
単相バルクセメンタイトの圧縮変形挙動および水素透過挙動

足立望, 戸髙義一, 諸岡聡, 徐平光

日本鉄鋼協会第184回秋季講演大会, Sep 21, 2022
純Feの組織制御による油潤滑環境下における低摩擦化

戸高義一, 足立望, 宮田航英, 島野瑠翔, 光原昌寿

日本鉄鋼協会第184回秋季講演大会, Sep 21, 2022
強ひずみ加工したオーステナイト系ステンレス鋼SUS316LNの水素脆化挙動に及ぼす引張ひずみ速度の影響

戸高義一, 足立望, Mweta Frank, 小林正和, 三浦博己, 渡邊千尋, 青柳吉輝

日本金属学会第171回秋期講演大会, Sep 20, 2022

Committee Memberships

Mar, 2021 - Present

支部評議員, 日本金属学会・日本鉄鋼協会東海支部
Mar, 2019 - Present

若手フォーラム「実験・シミュレーション研究とデータ科学」大学委員, 一般社団法人日本鉄鋼協会材料の組織と特性部会
Mar, 2019 - Present

微小領域の力学特性評価とマルチスケールモデリング研究会委員, 公益社団法人日本金属学会
May, 2017 - Present

若手材料研究会幹事, 日本金属学会・日本鉄鋼協会東海支部
Mar, 2018 - Feb, 2020

若手研究グループ No.04 「量子ビーム散乱測定による金属組織形成過程のマルチスケール解析研究グループ」幹事, 公益社団法人日本金属学会
Apr, 2017 - Mar, 2019

会報編集委員, 公益社団法人日本金属学会

Misc.

High Performance of Rolling Contact Fatigue in Steels Based on Surface-nanostructure Control through Heavy Plastic Deformation Processing and Heat Treatment

Sanyo Technical Report, 29(1) 12-21, Jun, 2022 Invited
表層加工と高周波焼入れを用いた組織制御による油潤滑下転動疲労寿命の向上

足立望, 戸高義一, 鈴木拓哉, 塚原真宏, 井戸原修

熱処理, 61(5) 221-222, Oct, 2021 Peer-reviewedInvitedLead authorCorresponding author
HPT加工・熱処理により作製した超微細粒鋼の引張変形その場中性子回折による変形挙動解析

足立望, 戸高義一, ハルヨステファヌス, 諸岡聡, 川崎卓郎

日本金属学会講演概要(CD-ROM), 159th ROMBUNNO.J30, Sep 7, 2016
Anomalous magnetic small-angle neutron scattering in severely deformed pure Fe

Y. Oba, N. Adachi, Y. Todaka, K. Yamamoto, M. Sugiyama

Australia-Japan Workshop on Neutron Science, Mar, 2016
その場中性子回折による超微細粒純鉄の変形挙動解析

足立望, 戸高義一, HARJO S., 諸岡聡, 川崎卓郎

日本中性子科学会年会講演概要集, 16th, 2016
Change of Magnetism in Pd induced by high-pressure torsion

Oba Yojiro, Sakuragi Shunsuke, Adachi Nozomu, Todaka Yoshikazu, Sato Tetsuya, Sugiyama Masaaki

Meeting Abstracts of the Physical Society of Japan, 68 375-375, 2013

Professional Memberships

Research Projects

Planning and management for promoting research on Anankeon dynamics

Grants-in-Aid for Scientific Research, Grant-in-Aid for Transformative Research Areas (B), Japan Society for the Promotion of Science, May, 2022 - Mar, 2025
Development of new method to control microstructure through tailoring mechanical stability and free energy of high pressure phase

Grants-in-Aid for Scientific Research, Grant-in-Aid for Early-Career Scientists, Japan Society for the Promotion of Science, Apr, 2019 - Mar, 2021

Adachi Nozomu
Mechanical Enhancement Based on Control of Activation Volume for Dislocation Motion in Crystalline Metals

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2018 - Mar, 2021

TODAKA YOSHIKAZU
Origin of mechanical property improvement in bulk metallic glasses through microstructural control

Grants-in-Aid for Scientific Research, Grant-in-Aid for Young Scientists (B), Japan Society for the Promotion of Science, Apr, 2016 - Mar, 2018

Adachi Nozomu
Elucidation of metallurgical factors for controlling friction coefficient through nanocrystallization in metals

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2015 - Mar, 2018

TODAKA YOSHIKAZU, ADACHI Nozomu, HINO Masahiro, MURO Takayuki

Social Activities

R1年度高専体験実習生受け入れ

Lecturer, Consultant

Aug, 2019
H30年度高専体験実習生受け入れ

Lecturer, Consultant

Aug, 2018
「青少年のための科学の祭典 2017・東三河大会」出展

Lecturer, Performer

Jan 20, 2018
H29 年度 TUT Jr. 技術科学教育プロジェクト(時習館 SSH SS 技術科学)

Lecturer

Aug, 2017
H29年度高専体験実習生受け入れ

Lecturer, Consultant

Aug, 2017