ウラ シャリフ

J-GLOBALへ         更新日: 17/09/13 22:35
 
アバター
研究者氏名
ウラ シャリフ
 
ウラ シャリフ
URL
http://hanadasearch.office.kitami-it.ac.jp/searchen/show/id/1202
所属
北見工業大学
部署
工学部
職名
准教授
学位
博士(工学)
ORCID ID
0000-0003-4584-5288

プロフィール

1992年9月 バングラデシュ工科大学機械工学部機械工学科卒業
1993年3月 大阪府のFulbrightとして来日
1993年4月 関西国際学友会日本語学校入学
1994年3月 関西国際学友会日本語学校卒業
1994年4月 関西大学大学院博士前期課程機械工学専攻入学
1996年3月 関西大学大学院博士前期課程機械工学専攻修了
1996年4月 国費留学生として採用
1996年4月 関西大学大学院博士後期課程機械工学専攻進学
1999年3月 関西大学大学院博士後期課程機械工学専攻修了
2000年4月 タイ王国へ移動
2000年4月 アジア工科大学院生産管理学科助教授就任
2002年8月 アラブ首長国連邦へ移動
2002年9月 アラブ首長国連邦大学工学部機械工学科助教授就任
2006年9月 アラブ首長国連邦大学工学部機械工学科准教授就任
2009年9月 二度目の来日
2009年10月 北見工業大学工学部機械工学科准教授就任

研究分野

 
 

経歴

 
2009年10月
 - 
現在
北見工業大学 工学部 機械工学科 准教授
 
2006年9月
 - 
2009年8月
アラブ首長国連邦大学 工学部 准教授
 
2002年9月
 - 
2006年8月
アラブ首長国連邦大学 工学部 機械工学科 助教授
 
2000年4月
 - 
2002年12月
アジア工科大学院 生産システム工学 助教授
 

学歴

 
1996年4月
 - 
1999年3月
関西大学大学院 博士後期課程 機械工学専攻  
 
1994年4月
 - 
1996年3月
関西大学大学院 博士前期課程 機械工学専攻  
 
1987年4月
 - 
1992年9月
バングラデシュ工科大学 機械工学部 機械工学科  
 

論文

 
M. Chowdhury, A. Sharif Ullah, Saqib Anwar
Materials   10(9) 1069   2017年9月   [査読有り]
Sweety Shahinur, A.M.M. Sharif Ullah, Muhammad Noor-E-Alam, Hiroyuki Haniu, Akihiko Kubo
Artificial Intelligence for Engineering Design, Analysis and Manufacturing   31(03) 298   2017年8月   [査読有り]
AMM Sharif Ullah
Computer-Aided Design and Applications   1   2017年8月   [査読有り]
A.M.M. Ullah
Mathematical and Computational Applications   22(2) 33   2017年5月   [査読有り]
   2017年5月   [査読有り]
A. M. M. Sharif Ullah
601   2016年9月   [査読有り]
International Journal of Automation Technology   10(2) 222   2016年3月   [査読有り]
International Journal of Automation Technology   10(2) 132   2016年3月   [査読有り]
A.M.M. Sharif Ullah, M.A.K. Chowdhury, Akihiko Kubo
Applied Mechanics and Materials   860 13   2016年   [査読有り]
AMM Sharif Ullah
Fractal Geometry and Nonlinear Analysis in Medicine and Biology   1(4)    2016年   [査読有り]
Miura K.T, Sharif Ullah A.M.M.
International Journal of Automation Technology   10(2)    2016年   [査読有り]
15(3):241-255
   2015年1月   [査読有り]
15(3):241-255
Shin MATSUI, Sharif ULLAH, Akihiko KUBO, Akiyoshi FUJI
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : {LEM}21   2015.8(0) \_}1602   2015年   [査読有り]
Dongyuan WU, Sharif ULLAH, Akihiko KUBO, Akiyoshi FUJI
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : {LEM}21   2015.8(0) \_}2302   2015年   [査読有り]
AMM Sharif Ullah
Computer Engineering {\&} Information Technology   04(03)    2015年   [査読有り]
Ullah AMMS
Industrial Engineering {\&} Management   04(03)    2015年   [査読有り]
AMM Sharif Ullah
Int J Swarm Intel Evol Comput   04(02)    2015年   [査読有り]
AMM Sharif Ullah
Fractal Geometry and Nonlinear Analysis in Medicine and Biology Fractal Geometry and Nonlinear Anal in Med and Biol   1(2)    2015年   [査読有り]
International Journal of Automation Technology   8(5) 745   2014年9月   [査読有り]
Akihiko Kubo, A.M.M. Sharif Ullah, Jun'ichi Tamaki
AMR   1017 592   2014年9月   [査読有り]
Sharif Ullah A.M.M, Fuji A, Kubo A, Tamaki J.
International Journal of Automation Technology   8(5) 745-753   2014年   [査読有り]
Akihiko Kubo, M.A.K. Chowdhury, Shoma Noda, Junichi Tamaki, A.M.M. Sharif Ullah
AMR   797 751   2013年9月   [査読有り]
Yasushi Mochida, Akihiko Kubo, Jun'ichi Tamaki, Katsuko Harano, Hitoshi Sumiya, A.M.M. Sharif Ullah
AMR   565 205   2012年9月   [査読有り]
A. M. M. Sharif Ullah, Hiroyuki Hashimoto, Fumiya Hayashi, Ryuta Omori, Yuji Nagara, Akihiko Kubo, Jun'ichi Tamaki
877   2012年   [査読有り]
Rashid M.M, Sharif Ullah A.M.M, Rashid Sarkar M.A, Tamaki J, Kubo A.
ISCIIA 2012 - 5th International Symposium on Computational Intelligence and Industrial Applications      2012年   [査読有り]
Md. Mamunur Rashid, A.M.M. Sharif Ullah, Junichi Tamaki, Akihiko Kubo
AMR   325 693   2011年8月   [査読有り]
Akihiko Kubo, Yasushi Mochida, Junichi Tamaki, Katsuko Harano, Hitoshi Sumiya, A.M.M. Sharif Ullah
AMR   325 153   2011年8月   [査読有り]
Md. Mamunur Rashid, Jun{\textquotesingle}ichi Tamaki, A.M.M. Sharif Ullah, Akihiko Kubo
Industrial Engineering and Management Systems   10(2) 140   2011年6月   [査読有り]
Md Mamunur Rashid, Jun'ichi Tamaki, AMM Sharif Ullah, Akihiko Kubo
International Journal of Engineering, Science and Technology   2(9)    2011年3月   [査読有り]
Yuya AOKI, Satoshi YANAGI, Akihiko KUBO, Jun{\textquotesingle}ichi TAMAKI, Takao KAMEDA, A.M.M. Sharif Ullah
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : {LEM}21   2011.6(0) \_}3290   2011年   [査読有り]
Aoki Y, Yanagi S, Kubo A, Tamaki J, Kameda T, Sharif Ullah A.M.M.
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011      2011年   [査読有り]
Aoki Y, Yanagi S, Kubo A, Tamaki J, Kameda T, Sharif Ullah A.M.M.
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011      2011年   [査読有り]
Rashid M.M, Tamaki J, Sharif Ullah A.M.M, Kubo A.
International Journal of Engineering Business Management   3(2) 29-36   2011年   [査読有り]
Akihiko Kubo, Junichi Tamaki, A.M.M. Sharif Ullah
AMR   126-128 579   2010年8月   [査読有り]
Takahiro Takechi, Junichi Tamaki, Akihiko Kubo, A.M.M. Sharif Ullah
AMR   126-128 235   2010年8月   [査読有り]
A.M.M. Sharif Ullah, Junichi Tamaki, Akihiko Kubo
AMR   126-128 672   2010年8月   [査読有り]
Than Lin, A. M. M. Sharif Ullah, Khalifa H. Harib
Computer-Aided Design and Applications   3(1-4) 331   2006年1月   [査読有り]
Lin T, Ullah A.M.M.S, Harib K.H.
Computer-Aided Design and Applications   3(1-4) 331-339   2006年   [査読有り]
Ullah A.M.M.S, Yano A, Higuchi M.
Technology Reports of Kansai University   40(1) 15-26   1998年   [査読有り]
Ullah A.M.M.S, Yano A, Higuchi M.
Technology Reports of Kansai University   40(1) 15-26   1998年   [査読有り]
Ullah A.M.M.S, Yano A, Higuchi M.
JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing   40(3) 540-546   1997年   [査読有り]
Ullah A.M.M.S, Yano A, Higuchi M.
JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing   40(3) 540-546   1997年   [査読有り]

Misc

 
A. M M Sharif Ullah, Takeshi Akamatsu, Masahiro Furuno, M. A K Chowdhury, Akihiko Kubo
International Journal of Automation Technology   10 727-736   2016年9月
© 2016 Fuji Technology Press Ltd. All Rights Reserved.This study addresses the strategies for developing the cutting tools used in the material removal process calledmilling from the viewpoint of sustainable manufacturing. Sustainable manufacturin...
Doriana M. D’Addona, A. M.M.Sharif Ullah, D. Matarazzo
Journal of Intelligent Manufacturing   28 1285-1301   2017年8月
© 2015, Springer Science+Business Media New York. Managing tool-wear is an important issue associated with all material removal processes. This paper deals with the application of two nature-inspired computing techniques, namely, artificial neural...
Sweety Shahinur, A. M.M.Sharif Ullah, Muhammad Noor-E-Alam, Hiroyuki Haniu, Akihiko Kubo
Artificial Intelligence for Engineering Design, Analysis and Manufacturing: AIEDAM   31 298-312   2017年8月
© 2017 Cambridge University Press. This study deals with both a decision model for making decisions under epistemic uncertainty and how to use it for selecting optimal materials under the same uncertainty. In particular, the proposed decision mode...
D. M. D'Addona, A. M.M.Sharif Ullah, R. Teti
Procedia CIRP   62 111-116   2017年1月
© 2017 The Authors. Published by Elsevier B.V. Based on recently established correlations between emergent synthesis classes, a Class III synthesis problem concerning tool inventory management in a complex make-to-order manufacturing environment i...
A. M.M. Sharif Ullah, Sweety Shahinur, Hiroyuki Haniu
Materials   10    2017年1月
© 2017 by the authors. Products made from natural materials are eco-friendly. Therefore, it is important to supply product developers with reliable information regarding the properties of natural materials. In this study, we consider a widely used...
Sweety Shahinur, Amm Sharif Ullah
Procedia CIRP   61 541-546   2017年1月
© 2017 The Authors. Nowadays, natural fibers have earned a great deal of attention because they help produce eco-products. Since natural fibers grow naturally and their microscopic structures cannot be controlled, their material properties exhibit...
Dongyuan Wu, Sharif Ullah, Akihiko Kubo, Akiyoshi Fuji
Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015      2015年10月
Three distinct segments (segments of the constituent materials and joint area) underlie a bimetallic component. As a result, the surface of a bimetallic is highly complex compared to that of its monometallic counterpart. In this study, bimetallic ...
Sharif Ullah A. M. M., Akamatsu Takeshi, Furuno Masahiro, Chowdhury M. A. K., Kubo Akihiko
International journal of automation technology   10(5) 727-736   2016年9月
Shin Matsui, Sharif Ullah, Akihiko Kubo, Akiyoshi Fuji
Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015      2015年10月
Multi-material components (e.g., bimetallic components) are considered better than their monometallic counterparts in terms of sustainability. To get some insights into the machining characteristics of a bimetallic component, turning experiments h...
A. M.M.Sharif Ullah
International Journal of Mechanical Engineering Education   44 233-254   2016年7月
© SAGE Publications. This article addresses the interplay of e-learning (through the Internet) and manufacturing engineering education (at the undergraduate level). As is the case in other engineering programs, e-learning in manufacturing engineer...
Ullah A. M. M. Sharif, D'Addona D. M., Harib Khalifa H.
International journal of automation technology   10(2) 222-230   2016年3月
D. M. D'Addona, D. Matarazzo, A. M M Sharif Ullah, R. Teti
Procedia CIRP   33 221-226   2015年1月
© 2014 The Authors. Published by B.V. In the modern manufacturing systems, machining parameters are fundamental to achieve efficiency for the whole production process. The feed rate, the cutting speed and several other parameters affect significan...
Ullah A. M. M. Sharif, Sato Michihiro, Watanabe Michiko
International journal of automation technology   10(2) 132-143   2016年3月
A. M.M. Sharif Ullah, D. M. D’Addona, Khalifa H. Harib, Than Lin
International Journal of Automation Technology   10 222-230   2016年1月
© 2016, Fuji Technology Press. All rights reserved. Fractal geometry can create virtual models of complex shapes as CAD data, and from these additive manufacturing can directly create physical models. The virtual-model-building capacity of fractal...
A. M.M. Sharif Ullah, Michihiro Sato, Michiko Watanabe, Md Mamunur Rashid
International Journal of Automation Technology   10 132-143   2016年1月
© 2016, Fuji Technology Press. All rights reserved. This study addresses the integration of Computer- Aided Design (CAD), Theory of Inventive Problem Solving (TRIZ), and Customer Needs for the sake of product development. TRIZ can generate plausib...
Kenjiro T. Miura, A. M M Sharif Ullah
International Journal of Automation Technology   10 131   2016年1月
WU Dongyuan, ULLAH Sharif, KUBO Akihiko, FUJI Akiyoshi
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21   2015(8) "2302-1"-"2302-6"   2015年10月
Three distinct segments (segments of the constituent materials and joint area) underlie a bimetallic component. As a result, the surface of a bimetallic is highly complex compared to that of its monometallic counterpart. In this study, bimetallic ...
A. M M Sharif Ullah, Akiyoshi Fuji, Akihiko Kubo, Jun’ichi Tamaki
International Journal of Automation Technology   8 745-753   2014年1月
© 2009 Fuji Technology Press Co,. Ltd. All Rights Reserved. This study describes a methodology to evaluate the sustainability of a bimetallic component putting emphasis on energy, material, and component efficiencies. Energy efficiency deals with ...
A. M M Sharif Ullah, Akiyoshi Fuji, Akihiko Kubo, Jun'ichi Tamaki, Masaaki Kimura
Machining Science and Technology   19 339-359   2015年1月
© 2015 Taylor & Francis Group, LLC. A bimetallic component may perform better than its monometallic counterpart in terms of sustainability (i.e., cost, weight, and environmental impacts of primary material production). Thus, the usages of such c...
Akihiko Kubo, A. M M Sharif Ullah, Jun'ichi Tamaki
Advanced Materials Research   1017 592-597   2014年1月
© (2014) Trans Tech Publications, Switzerland. The surface of a grinding wheel dressed by a diamond rotary dresser was generated by computer-aided simulation for the case of multipass dressing on the assumption that the grinding wheel is a homogen...
Jun'ichi Tamaki, Akihiko Kubo, A. M M Sharif Ullah
International Journal of Mechatronics and Manufacturing Systems   7 227-245   2014年1月
© 2014 Inderscience Enterprises Ltd. Nano-polycrystalline diamond is a binderless diamond synthesised by the direct conversion of graphite under high pressure and high temperature. This diamond has the same or higher hardness than synthesised mono...
A. M.M. Sharif Ullah, Yoshimi Sato, Akihiko Kubo, Jun'ichi Tamaki
Computer-Aided Design and Applications   12 241-255   2015年1月
© 2014, © 2014 CAD Solutions, LLC. ABSTRACT: This study deals with the design for manufacturing (DFM) of fractals created by a random walk called iterated function system (IFS). In particular, the DFM of an IFS-created fractal called Barnsley's fe...
柳 敏, 久保 明彦, 亀田 貴雄, 田牧 純一, A.M.M. Sharif Ullah, YANAGI Satoshi, KUBO Akihiko, KAMEDA Takao, TAMAKI Junʼichi
雪氷   77(1) 75-89   2015年1月
MATSUI Shin, ULLAH Sharif, KUBO Akihiko, FUJI Akiyoshi
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21   2015(8) "1602-1"-"1602-6"   2015年10月
Multi-material components (e.g., bimetallic components) are considered better than their monometallic counterparts in terms of sustainability. To get some insights into the machining characteristics of a bimetallic component, turning experiments h...
A. M M Sharif Ullah, R. Omori, Y. Nagara, A. Kubo, J. Tamaki
Procedia CIRP   12 43-48   2013年11月
Fractals are self-similar-scale-invariant entities and often used for modeling complex shapes including natural (e.g., plant, leaf, flower, animal, landscape, etc.) and aesthetically valuable ones (e.g., shapes used in jewelry, buildings, etc.). T...
久保 明彦, 田牧 純一, ウラ シャリフ
砥粒加工学会誌   59(4) 197-204   2015年
角柱ダイヤモンドロータリドレッサを用いてトラバース方式でドレッシングを行う場合について,砥石が均質な連続体であるという仮定に基づいてドレッシングプロセスの幾何学的解析を行い,個々の角柱ダイヤモンド粒によって除去される砥石体積および実質切込み量に及ぼすドレッシング条件の影響を検討した.その結果,以下の点が明らかとなった.砥石端面の両側で切込みを与えるトラバースドレッシングの場合,砥石除去体積に切り残しが発生するため,角柱ダイヤモンド粒の砥石除去体積および実質切込み量は,砥石作業面が平坦で切り...
K. H. Harib, A. M M Sharif Ullah, K. A F Moustafa
Procedia CIRP   12 109-114   2013年11月
The structures of machine tools used nowadays require improvement for achieving the sustainability of manufacturing in terms of functionality, cost, and energy consumption. This study deals with the optimal design problem formulation for improving...
Ullah A. M. M. Sharif, Fuji Akiyoshi, Kubo Akihiko
International journal of automation technology   8(5) 745-753   2014年9月
A. M M Sharif Ullah, N. Arai, M. Watanabe
Procedia CIRP   12 378-383   2013年11月
Manufacturing is a knowledge-intensive activity and the Internet has become a useful tool for storing, sharing, and reusing knowledge. This study describes some issues of Internet-aided manufacturing knowledge representation from the context of co...
久保 明彦, 田牧 純一, ウラ シャリフ
砥粒加工学会誌   59(4) 197-204   2015年4月
Akihiko Kubo, M. A K Chowdhury, Shoma Noda, Jun'ichi Tamaki, A. M M Sharif Ullah
Advanced Materials Research   797 751-756   2013年10月
A computer-aided simulation was developed to visualize the three-dimensional topography of a grinding wheel surface dressed by a rotary diamond dresser (RDD), and the effects of up-cut and down-cut dressing on the roughness of the dressed surface ...
M. Shamsuzzaman, A. M M Sharif Ullah, F. T. Dweiri
International Journal of Industrial and Systems Engineering   14 230-244   2013年5月
This study describes a fuzzy-logic-based multiple-criteria decisionmaking approach to rank coals for industrial use. Calorific value and chemical compositions (i.e. sulphur, fixed carbon, volatile matter, moisture and ash contents) of coals are co...
A. M.M.Sharif Ullah, Doriana D'Addona, Nobuyuki Arai
BioSystems   117 40-53   2014年3月
This study deals with a computing method called DNA based computing (DBC) that takes inspiration from the Central Dogma of Molecular Biology. The proposed DBC uses a set of user-defined rules to create a DNA-like sequence from a given piece of pro...
ウラ シャリフ
設計工学 = Journal of Japan Society for Design Engineering : 日本設計工学会誌   49(1) 20-23   2014年1月
Yuya Aoki, Satoshi Yanagi, Akihiko Kubo, Jun'Ichi Tamaki, Takao Kameda, A. M M Sharif Ullah
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2011      2011年12月
A method for replicating snow crystals using a light-curing resin was proposed and the 3D reproduction of a snow crystal by stereolithography was conducted. It was found that a UV light irradiation density greater than 0.2 mW/cm2 was required to c...
久保 明彦, 田牧 純一, ウラ シャリフ, 尾崎 義治
砥粒加工学会誌   58(4) 253-259   2014年
ロータリダイヤモンドドレッサを用いてトラバース方式によりドレッシングする場合について,砥石の表層を均質な連続体と仮定し,幾何学的に得られるドレッシング軌跡を砥石作業面に転写することにより砥石作業面を創成する手法を提案し,角柱ダイヤモンドロータリドレッサの場合について砥石作業面粗さに及ぼすドレッシング条件の影響を検討した.その結果,1)ドレッシングにともなう砥石作業面の最大高さ粗さの変化を追跡することによって,砥石作業面の全領域がドレッシングされるための条件,すなわち,片側1回ドレッシングに...
久保 明彦, 田牧 純一, ウラ シャリフ
砥粒加工学会誌   58(4) 253-259   2014年4月
A. M.M.Sharif Ullah, Hiroyuki Hashimoto, Akihiko Kubo, Junichi Tamaki
International Journal of Sustainable Manufacturing   3 20-36   2013年12月
Sustainability of rapid prototyping (RP) depends on both model-building materials (wooden-materials, photo-resins, etc.) and model-building processes (additive processes - SLA, SLS, etc.; and subtractive processes - e.g., wood-sawing). In this stu...
Sharif Ullah A. M. M.
JSEE annual conference international session proceedings   2013(0) 72-77   2013年8月
Manufacturing (Monozukuri in Japan, Production is Europe) is one of the key elements of economic well-being of a society. This article deals with the interplay of manufacturing engineering courses and web-based education from the context of underg...
M. A K Chowdhury, Akihiko Kubo, Jun'Ichi Tamaki, A. M M Sharif Ullah
Journal of Advanced Mechanical Design, Systems and Manufacturing   7 506-520   2013年8月
Rotary diamond dressers are one of the most widely used dressers for the dressing of vitrified grinding wheels. In this study, we develop a relatively comprehensive dressing mechanism for the rotary diamond dresser that takes into consideration th...
A. M.M. Sharif Ullah, M. Shamsuzzaman
SIMULATION   89 860-875   2013年1月
Fuzzy Monte Carlo Simulation (FMCS) uses both the probability density function (pdf) and possibility distributions (e.g., fuzzy numbers) to model the uncertainty/imprecision associated with the input parameters and, then, to simulate the uncertain...
Yasushi Mochida, Akihiko Kubo, Jun'ichi Tamaki, Katsuko Harano, Hitoshi Sumiya, A. M M Sharif Ullah
Advanced Materials Research   565 205-210   2012年11月
A cutting-tool-type single-point diamond dresser, the tip of which has a given rake angle, was developed and its dressing and grinding performances were investigated. It was found that the dressing mechanism changes its mode from a ductile mode to...
M. A K Chowdhury, Jun'ichi Tamaki, Akihiko Kubo, A. M M Sharif Ullah
Advanced Materials Research   565 222-227   2012年11月
The grinding wheel surface topography after dressing is an indicator of the effectiveness of dressing operation and, thereby, the effectiveness of grinding as a whole. During dressing, the dresser travels the grinding wheel surface several times s...
Jun'Ichi Tamaki, Satoshi Yanagi, Yuya Aoki, Akihiko Kubo, Takao Kameda, A. M M Sharif Ullah
Journal of Advanced Mechanical Design, Systems and Manufacturing   6 923-935   2012年9月
A new method was proposed for replicating snow crystals that uses light-curing resin containing no harmful substances, as the replicating material, and the 3D reproduction of a snow crystal by stereolithography was conducted. It was found that a U...
A. M.M. Sharif Ullah, Md Mamunur Rashid, Jun'ichi Tamaki
CIRP Journal of Manufacturing Science and Technology   5 55-66   2012年1月
Concept-Knowledge theory (C-K theory) of design is a relatively new theory for describing reasoning and creative processes in engineering design. This paper describes some unique features of this theory. In particular, it is shown that C-K theory ...
Md Mamunur Rashid, A. M.M. Sharif Ullah, M. A. Rashid Sarkar, Jun'ichi Tamaki, Akihiko Kubo
ISCIIA 2012 - 5th International Symposium on Computational Intelligence and Industrial Applications      2012年1月
A product development process usually starts with a customer needs assessment, wherein the opinions of a selected segment of potential customers (respondents) are aggregated to know which features of a product are useful to what extent in fulfilli...
A. M.M. Sharif Ullah, Koichi Kitajima, Takeshi Akamatsu, Masahiro Furuno, Jun'ichi Tamaki, Akihiko Kubo
ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011   2 105-110   2011年12月
This study deals with some eco-indicators of cutting tools. Eco-indicators of cutting tools are classified into three categories, namely, material-, process-, and geometry-related eco-indicators. Material-related eco-indicators consist of density,...
Md Mamunur Rashid, Jun'ichi Tamaki, A. M.M. Sharif Ullah, Akihiko Kubo
International Journal of Engineering Business Management   3 29-36   2011年12月
Linguistic is the systematic study of language. Now quality doesn't always mean the "tangible attribute" of a product or service. It may also be linguistic. Thus, linguistic has applied for product design through capturing the voice of Customers. ...
AOKI Yuya, YANAGI Satoshi, KUBO Akihiko, TAMAKI Jun'ichi, KAMEDA Takao, Ullah A.M.M. Sharif
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21   2011(6) 3290-1"-"3290-4"   2011年11月
A method for replicating snow crystals using a light-curing resin was proposed and the 3D reproduction of a snow crystal by stereolithography was conducted. It was found that a UV light irradiation density greater than 0.2 mW/cm^2 was required to ...
Md Mamunur Rashid, A. M M Sharif Ullah, Jun'ichi Tamaki, Akihiko Kubo
Advanced Materials Research   325 693-698   2011年9月
Hard materials based on Alumina (AN), Silicon Carbide (SC), Boron Carbide/Nitride (BC/N), Zirconia (ZN), and alike are often used to produce abrasive grains and coat cutting tools. These materials improve the performance of grinding/machining oper...
Akihiko Kubo, Yasushi Mochida, Jun'ichi Tamaki, Katsuko Harano, Hitoshi Sumiya, A. M M Sharif Ullah
Advanced Materials Research   325 153-158   2011年9月
Face cutting of tungsten carbide was conducted using two monocrystalline diamond tools and three polycrystalline diamond tools to investigate the wear characteristics in terms of the crystal structure and composition of the diamond. It was found t...
Sharif Ullah A. M. M.
JSEE annual conference international session proceedings   2011(0) 32-35   2011年9月
The quality of an undergraduate engineering degree program is nowadays demonstrated by whether or not the students have achieved a set of outcomes (e.g., educational outcomes (a)-(k) prescribed by ABET). Particularly, the following three are criti...
A. M M Sharif Ullah, Jun'Ichi Tamaki
Systems Engineering   14 154-172   2011年6月
The Kano model is a useful model for integrating the Voice of the Customer into the subsequent processes of product development. This paper presents a method for analyzing customers' preferences obtained by using the Kano model. In the Kano model,...
Md Noor-E-Alam, Tahmina Ferdousi Lipi, M. Ahsan Akhtar Hasin, A. M.M.S. Ullah
Knowledge-Based Systems   24 367-377   2011年4月
Inherent complexity and uncertainty in a business environment necessitate the participation of many experts in multi criteria decision making. However, participation of many experts makes the conflict aggregation process difficult. To handle this ...
Obaid Khozaimy, Abdulla Al-Dhaheri, A. M M Sharif Ullah
Applied Soft Computing Journal   11 2576-2586   2011年3月
Real-life decision problems are often solved by using a very limited set of data points. The computational complexity of such decision problems can be handled easily by using a mathematical entity called stochastic point cloud (SPC). In general, S...
武知 孝洋, 田牧 純一, 久保 明彦, ウラ シャリフ
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   55(2) 113-120   2011年2月
切込み量によって加工プロセスを制御する固定砥粒加工を光学ガラスの延性モード加工法として実用化するためには,延性・脆性遷移臨界切込み深さに対する知見とともに,固定砥粒加工法固有の現象である弾性切り残しや盛り上がりなどの弾性・塑性挙動を理解することが必要である.本研究は,光学ガラスの弾性・塑性挙動を実験的に解明することを目的としており,石英ガラスを対象としてナノインデンテーションおよび単刃フライカット実験を行った.ナノインデンテーションでは,ビッカース圧子と球圧子の場合について押込み量と弾性変...
餅田 恭志, 久保 明彦, 田牧 純一, 原野 佳津子, 角谷 均, ウラ シャリフ
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   56(9) 618-625   2012年9月
Takahiro Takechi, Jun'ichi Tamaki, Akihiko Kubo, A. M.M. Sharif Ullah
Advanced Materials Research   126-128 235-240   2010年12月
Single-point fly cutting and nanoindentation test of quartz glass were performed using three different cutting tools, namely, a V-shaped cutting tool, a Vickers indenter and a spherical indenter, to investigate the elastic and plastic behaviors of...
A. M.M. Sharif Ullah, Jun'Ichi Tamaki, Akihiko Kubo
Advanced Materials Research   126-128 672-677   2010年12月
The main body of grinding knowledge comes from the experiments done by independent investigators. If such experimental results are not made both human- and machine-comprehensible from the very beginning, then it would be difficult to reuse the res...
A. M.M.Sharif Ullah
CIRP Journal of Manufacturing Science and Technology   3 293-303   2010年12月
DNA-based computing (DBC) is one of the promising nature-inspired computing paradigms. In this paper, a new DBC method is developed for solving complex engineering problems by using silicon-based computing machines. The proposed DBC method is appl...
A. M M Sharif Ullah, Khalifa H. Harib
Journal of Intelligent Manufacturing   21 681-691   2010年12月
Cutting force signals exhibit a set of stochastic elements that repeat also in a stochastic manner. In this study, it is shown that nonstationary Gaussian processes (i.e., processes wherein the mean and the standard deviation of a normally distrib...
Akihiko Kubo, Jun'ichi Tamaki, A. M M Sharif Ullah
Advanced Materials Research   126-128 579-584   2010年12月
Two grinding methods, parallel grinding and cross grinding, were applied to the horizontal-axis-type rotary surface grinding of silicon and tungsten carbide. It was found that the cross grinding method results in better ground surface roughness th...
Sharif Ullah A.M.M., Tamaki Jun'ichi
ロボティクス・メカトロニクス講演会講演概要集   2010 "2A2-G04(1)"-"2A2-G04(3)"   2010年
Human being often learns from graphical information and then makes necessary conclusion using it. This paper deals with this issue and suggests a way to develop a machine learning technique to make conclusions from graphical information as if a hu...
A. M M Sharif Ullah, Khalifa H. Harib, Muaatasem Awda, Salah S. Zenieh
SAE Technical Papers      2009年12月
This study shows how to apply the principles of Axiomatic Design to develop a system for cutting parameter selection for milling-one of the widely used material removal processes. The attention is given on the industrial practices during the rough...
A. M.M.Sharif Ullah, Andrew Fisher, Ahmed Alawar
SAE Technical Papers      2008年12月
In order to facilitate the decision-making activities in engineering design, formal computation of imprecise information is necessary. This study shows a method to formally compute the imprecision associated with both design-relevant (graphical) i...
Khalifa H. Harib, A. M M Sharif Ullah, A. M M Sharif Ullah
SAE Technical Papers      2008年12月
Compared to the conventional serial structures of machine tools, hexapod-based structures are attracting increased attention because of their high rigidity and accuracy, less sliding surfaces, and light weight. There is no broadly accepted methodo...
A. M M Sharif Ullah, Khalifa H. Harib
Advanced Engineering Informatics   22 473-483   2008年10月
Material selection is associated with all design and manufacturing problems. This paper presents an intelligent method to deal with the materials selection problems wherein the design configurations, working conditions, as well as the design-relev...
Md Noor-E-Alam, M. Ahsan Akhtar Hasin, A. M.M. Sharif Ullah, Tahmina Ferdousi Lipi
International Journal of Industrial and Systems Engineering   3 368-381   2008年3月
Inherent complexity and uncertainty in a business environment necessitates the consideration of conflicting multi criteria in the supplier evaluation process. In multi criteria supplier evaluation process, there are many decision situations in whi...
A. M.M.Sharif Ullah, A. M.M.Sharif Ullah, A. M.M.Sharif Ullah, A. M.M.Sharif Ullah, A. M.M.Sharif Ullah, A. M.M.Sharif Ullah
International Journal of Manufacturing Technology and Management   14 215-227   2008年3月
The formal interaction between domain knowledge and human cognition in design is described by using some logical operations (induction, deduction, extension). When the extracted domain knowledge is not computable using deduction, a designer can cr...
A. M M Sharif Ullah, Khalifa H. Harib, Ahmed Al Awar
SAE Technical Papers      2007年12月
This study shows that to minimize the information content at an early stage of a design process, three types of compliance are required, namely range, certainty, and requirement compliances. Range compliance measures the average belongingness of a...
K. H. Harib, A. M M Sharif Ullah, A. Hammami
International Journal of Machine Tools and Manufacture   47 1426-1432   2007年7月
This paper shows kinematic analysis and trajectory planning for a novel machine tool structure consisting of a six degree-of-freedom hexapod machine and a two-degree-of-freedom rotary table. Accordingly, to operate the proposed machine tool, eight...
A. M M Sharif Ullah, Khalifa H. Harib
Advanced Engineering Informatics   20 335-350   2006年10月
This paper deals with a human-assisted knowledge extraction method to extract "if...then..." rules from a small set of machining data. The presented method utilizes both probabilistic reasoning and fuzzy logical reasoning to benefit from the machi...
A. M M Sharif Ullah, A. M M Sharif Ullah, A. M M Sharif Ullah, A. M M Sharif Ullah, A. M M Sharif Ullah
Systems Engineering   8 296-308   2005年12月
In conceptual design, there are decision problems wherein the information cannot be assessed precisely in a quantitative manner, but may be assessed in a qualitative manner. This necessitates a linguistic descript on a decision problem in conceptu...
A. M M Sharif Ullah
Research in Engineering Design   16 109-117   2005年12月
This study develops a method for determining optimal design embodiments under the following assumptions: (1) the design approach involves the axiomatic design theory and (2) the design-relevant information refers to a designer's intuition, express...
A. M M Sharif Ullah, Khalifa H. Harib
Journal of Intelligent Manufacturing   16 317-330   2005年6月
This study deals with the integration of crisp and granular information for predicting the performance of a manufacturing process. Supporting and computing a set of two If-Then rules is considered the central idea for this integration. In these ru...
M. Shamsuzzaman, A. M M Sharif Ullah, Erik L J Bohez
Integrated Manufacturing Systems   14 247-254   2003年6月
This paper presents a computational framework that combines both fuzzy sets and analytical hierarchy process (AHP) for selecting the best-ranked flexible manufacturing system from a number of feasible alternatives. Fuzzy sets are employed to recog...
A. M M Sharif Ullah, A. M M Sharif Ullah
BioSystems   68 31-41   2003年1月
This study deals with a biologically inspired system called DNA Addition System (DAS). The system consists of four elements: a chain molecule; a set of free (elemental) molecules, all of which refer to the elements of DNA; a quasi-free molecule, w...
A. M M Sharif Ullah, Akishige Yano, Masahiro Higuchi
Technology Reports of Kansai University   40 15-26   1998年12月
This study presents a new knowledge representation method for the computer-aided process planning, CAPP. Machinability data has many applications in computer-aided process planning. Unique arrangement among the parameters pertaining to job, cuttin...
習田 喜弘, ウラ シャリフ, 矢野 章成, 樋口 誠宏, 山口 智実
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   42(10) 418-423   1998年10月
久保 明彦, 餅田 恭志, 田牧 純一, 原野 佳津子, 角谷 均, ウラ シャリフ
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   55(10) 593-600   2011年10月
樋口 誠宏, 矢野 章成, ウラ シャリフ
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   42(7) 288-291   1998年7月
A.M.M.Sharif Ullah, Yano Akishige, Higuchi Masahiro
関西大学工学研究報告   40 15-26   1998年3月
A. M M Sharif Ullah, Akishige Yano, Masahiro Higuchi
JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing   40 540-546   1997年9月
With assistance from DNA, mRNA, tRNA, RNA polymerase and aminoacyl-tRNA synthetase, biological systems synthesize amino acids in a particular sequence to produce a specific protein for a particular activity. On the other hand, using the parameters...
落合 浩士, ウラ シャリフ, 樋口 誠宏, 矢野 章成, 松森 昇, 吉沢 功
砥粒加工学会誌 = Journal of the Japan Society of Grinding Engineers   41(5) 186-189   1997年5月
Higuchi M, A M M S Ullah, Yano A
関西大学工業技術研究所研究報告   15 79-85   2000年
大海 英二, 矢野 章成, 樋口 誠宏, 山本 登, 山口 智実, シャリフ ウラ, 松森 昇, 吉沢 功
精密工学会大会学術講演会講演論文集   1997(1) 221-222   1997年3月

その他

 
SAY NO TO RACISM