MIZUTANI Masayoshi

J-GLOBAL         Last updated: Sep 3, 2019 at 14:35
 
Avatar
Name
MIZUTANI Masayoshi
URL
http://db.tohoku.ac.jp/whois/e_detail/6b9484b3acde702514468d65495ac005.html
Affiliation
Tohoku University
Section
Graduate School of Engineering Department of Mechanical Systems Engineering Functional Systems Engineering Nano-Precision Mechanical Fabrication
Job title
Associate Professor
Degree
(工学)(Keio University)

Research Areas

 
 

Published Papers

 
Yuta Kurashina, Atsushi Ezura, Ryo Murakami, Masayoshi Mizutani, Jun Komotori
Journal of Materials Science: Materials in Medicine   30    May 2019
© 2019, Springer Science+Business Media, LLC, part of Springer Nature. In this paper, we study a process for modifying the surface microtopography of the Ti oxide layer using a nanosecond-pulsed laser (NPL). Even now, the mechanism by which hydrox...
Keita Shimada, Takuya Hirai, Masayoshi Mizutani, Tsunemoto Kuriyagawa
International Journal of Automation Technology   13 191-198   Mar 2019
© 2019, Fuji Technology Press. All right reserved. Surface microstructures can provide various functionalities, and wettability is a typical surface property that can be controlled by surface textures. Unidirectional wetting properties (UWPs) have...
Shuhei Kodama, Shinya Suzuki, Kazuya Hayashibe, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Precision Engineering   55 433-438   Jan 2019
© 2018 Short-pulsed laser in the fabrication of fine periodic surface structures (hereinafter, referred to as LIPSS: laser induced periodic surface structures) has been studied to reduce friction, improve control of wettability and improve bioaffi...
Tomohiro Harai, Masatsugu Hirota, Tohru Hayakawa, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals   83 37-45   Jan 2019
Ⓒ 2018 The Japan Institute of Metals and Materials. The purposes of this study were to evaluate the microstructures and chemical composition changes of the surface of tetragonal zirconia polycrystal ( TZP) after irradiation of nanosecond pulsed la...
Masatsugu Hirota, Tomohiro Harai, Shinji Ishibashi, Masayoshi Mizutani, Tohru Hayakawa
Dental Materials Journal   38 444-451   Jan 2019
© 2019, Japanese Society for Dental Materials and Devices. All rights reserved. Two type of partially stabilized zirconia, namely yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) and ceria-stabilized tetragonal zirconia polycrystals incl...
Shuhei Kodama, Shinya Suzuki, Akihiro Shibata, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
International Journal of Automation Technology   12 868-875   Nov 2018
© 2018, Fuji Technology Press. All rights reserved. In recent years, nanostructures have been required for industry and medical services, to perform functions such as reduction in friction, control of wetta-bility, and enhancement in biological af...
前花英一, 長森亜弓, 石橋信治, 溝井琢巳, 嶋田慶太, 水谷正義, 厨川常元
砥粒加工学会誌   62(10) 527‐534   Oct 2018
Wang Jingsi, Xu Shaolin, Shimada Keita, Mizutani Masayoshi, Kuriyagawa Tsunemoto
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE   232(11) 1875-1884   Sep 2018   [Refereed]
SUN Yue, SHIMADA Keita, XU Shaolin, MIZUTANI Masayoshi, KURIYAGAWA Tsunemoto
International Journal of Automation Technology   12(4) 603‐610   Jul 2018
京泉朋希, 江川諒仁, 柴田頼人, 加藤千拓, 加藤千拓, 鷲見信行, 嶋田慶太, 水谷正義, 厨川常元
砥粒加工学会誌   62(7) 371‐376   Jul 2018
SUN Yue, XU Shaolin, KYOIZUMI Tomoki, SHIMADA Keita, MIZUTANI Masayoshi, KURIYAGAWA Tsunemoto
International Journal of Automation Technology   12(2) 206‐214   Mar 2018
Wang Jingsi, Shimada Keita, Mizutani Masayoshi, Kuriyagawa Tsunemoto
WEAR   394 96-108   Jan 2018   [Refereed]
嶋田慶太, 平井拓弥, 平井拓弥, 水谷正義, 厨川常元
砥粒加工学会誌   62(1) 39‐44   Jan 2018
Nobuyuki Sumi, Masakazu Ichimiya, Tomoki Kyoizumi, Akihito Egawa, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa, Nobuki Yamagata
Transactions of the Japan Society for Computational Engineering and Science   2018    Jan 2018
© 2018 by the Japan Society for Computational Engineering and Science. Plasma-Shot Treatment is a new technology for generating functional interface by moving electrode material to workpiece surface using micro pulsed discharge. It is possible to ...
Wang Jingsi, Shimada Keita, Mizutani Masayoshi, Kuriyagawa Tsunemoto
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   51 373-387   Jan 2018   [Refereed]
鷹巣良史, 嶋田慶太, 水谷正義, 厨川常元
砥粒加工学会誌   61(7) 392‐397   Jul 2017
Kobayashi Ryuichi, Xu Shaolin, Shimada Keita, Mizutani Masayoshi, Kuriyagawa Tsunemoto
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY   49 115-121   Jul 2017   [Refereed]
Verification of Implant Surface Modification by a Novel Processing Method
Okada Yoshiki, Abe Nobuhiro, Hisamori Noriyuki, Kaneeda Toshiaki, Moriyama Shigeaki, Ohmori Hitoshi, Mizutani Masayoshi, Yanai Hiroyuki, Nakashima Yoshio, Yokoyama Yusuke, Ozaki Toshifumi
ACTA MEDICA OKAYAMA   71(1) 49-57   Feb 2017   [Refereed]
Recent advances in ultrasonic-assisted machining for the fabrication of micro/nano-textured surfaces
Shaolin XU, Tsunemoto KURIYAGAWA, Keita SHIMADA, Masayoshi MIZUTANI
Frontiers of Mechanical Engineering   1-13   2017   [Refereed]
水谷 正義,久慈 千栄子,大久 洋幸,西村 俊亮,水谷 公一,赤塚 亮,佐々木 啓一,徐 少林,嶋田 慶太,厨川 常元
砥粒加工学会誌   61(1) 28-33   2017   [Refereed]
前花 英一,石橋 信治,嶋田 慶太,水谷 正義,厨川 常元
砥粒加工学会誌   61(1) 40-46   2017   [Refereed]
Development of a novel 2D rotary ultrasonic texturing technique for fabricating tailored structures
Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
International Journal of Advanced manufacturing Technology   89 1161-1172   2017   [Refereed]
小林龍一, 嶋田慶太, 水谷正義, 厨川常元
精密工学会誌(Web)   83(7) 687‐693(J‐STAGE)   2017
冨江瑛彦, 久慈千栄子, 赤塚亮, 佐々木啓一, 嶋田慶太, 水谷正義, 厨川常元
日本機械学会論文集(Web)   83(856) ROMBUNNO.17‐00169(J‐STAGE)   2017
XU Shaolin, OSAWA Shinsaku, KOBAYASHI Ryuichi, SHIMADA Keita, MIZUTANI Masayoshi, KURIYAGAWA Tsunemoto
International Journal of Automation Technology   10(6) 891‐898   Nov 2016
水谷 正義,湯田 彩香,小茂鳥 潤,嶋田 慶太,厨川 常元
砥粒加工学会誌   60(1) 35-39   2016   [Refereed]
柴田 章広,小玉 脩平,嶋田 慶太,水谷 正義,厨川 常元
精密工学会誌   82(5) 443-447   2016   [Refereed]
Yugo Fukayo, Tsuyoshi Amemiya, Kazutoshi Nakaoka, Masayoshi Mizutani, Jun Komotori, Yoshiki Hamada and Tohru Hayakawa
Journal of Hard Tissue Biology   25(2) 181-194   2016   [Refereed]
Shuhei Kodama, Akihiro Shibata, Shinya Suzuki, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
International Journal of Automation Technology   10(4) 639-646   2016   [Refereed]
Nobuyuki Sumi, Chihiro Kato, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
International Journal of Automation Technology   10(5) 773-779   2016   [Refereed]
XU Shalin, SHIMADA Keita, MIZUTANI Masayoshi, and KURIYAGAWA Tsunemoto
Chinese Journal of Mechanical Engineering   29(6) 1187-1192   2016   [Refereed]
水谷 正義,益子 直人,本多 遼,村上 諒,小茂鳥 潤,厨川 常元
砥粒加工学会誌   59(1) 17-22   2015   [Refereed]
Fabrication of Precision Micrograting on Resin Substrate Utilizing Ultrasonic-Assisted Molding
Sergey Bolotov, Ryuichi Kobayashi, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
International Journal of Automation Technology   9(1) 43-50   2015   [Refereed]
益子 直人,小林 龍一,寺岡 祥平,高柳 俊,嶋田 慶太,水谷 正義,厨川 常元
砥粒加工学会誌   59(10) 588-593   2015   [Refereed]
冨江 瑛彦,久慈 千栄子,大久 洋幸,嶋田 慶太,水谷 正義,佐々木 啓一,厨川 常元
日本機械学会論文集   81(832) 1-11   2015   [Refereed]
Improved Cytocompatibility of Nanosecond-Pulsed Laser-Treated Commercially Pure Ti Surfaces
Masayoshi Mizutani, Ryo Honda, Yuta Kurashina, Jun Komotori and Hitoshi Ohmori
International Journal of Automation Technology   8(1) 102-109   2014   [Refereed]
Shoichi Kikuchi, Yutaka Kameyama, Masayoshi Mizutani and Jun Komotori
Materials Transactions   55(1) 176-181   2014   [Refereed]
Keita Shimada, Chung-I Kuo, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
International Journal of Automation Technology   8(4) 576-583   2014   [Refereed]
Using Smoothed Particle Hydrodynamics to Examine Influence of Process Parameters on Ultrasonic Machining
Jingsi Wang, Keita Shimada, Masayoshi Mizutani, and Tsunemoto Kuriyagawa
International Journal of Automation Technology   8(6) 855-863   2014   [Refereed]
Hiroshi Kasuga, Masayoshi Mizutani, Akihiko Nemoto and Hitoshi Ohmori
International Journal of Nanomanufacturing   10(3) 309-318   2014   [Refereed]
Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
International Journal of Machine Tools and Manufacture   86 12-17   2014   [Refereed]
Jingsi WANG, Keita SHIMADA, Masayoshi MIZUTANI and Tsunemoto KURIYAGAWA
Advanced Materials Research   10(17) 758-763   2014   [Refereed]
Masayoshi Mizutani, Ryo Honda, Ayaka Yuda, Jun Komotori and Hitoshi OHMORI
Procedia CIRP   5 242-246   2013   [Refereed]
Hiroshi KOTANI, Jun KOMOTORI, Tetsuya NARUSE, Masayoshi MIZUTANI, Kazutoshi KATAHIRA, Hitoshi OHMORI, Motoki WASA and Kenji SUMIYA
Internaitonal Journal of Nanomanufacturing   9(1) 77-86   2013   [Refereed]
久森 紀之,松川 達哉,水谷 正義,大森 整,西村 直之,綱島 義貴,藏本 幸一,江面 篤志
砥粒加工学会誌   57(4) 235-240   2013   [Refereed]
H. Ohmori, M. Mizutani, T. Kaneeda, N. Abe, Y. Okada, S. Moriyama, N. Hisamori, N. Nishimura, Y. Tsunashima, J. Tanaka, K. Kuramoto and A. Ezura
Annals of the CIRP   62(1) 579-582   2013   [Refereed]
菊池 将一,水谷 正義,亀山 雄高,小茂鳥 潤
砥粒加工学会誌   57(8) 530-535   2013   [Refereed]
Shaolin Xu, Chihiro Nishikawa, Keita Shimada, Masayoshi Mizutani and Tsunemoto Kuriyagawa
Advanced Materials Research   797 326-331   2013   [Refereed]
Ihori HIRAGA, Mihoshi HAMADA, Jun KOMOTORI, Masayoshi MIZUTANI
International Journal of Nanomanufacturing   9(5/6) 486-495   2013   [Refereed]
Material Removal During Ultrasonic Machining using Smoothed Particle Hydrodynamics
Jingsi Wang, Keita SHIMADA, Masayoshi MIZUTANI, Tsunemoto KURIYAGAWA
International Journal of Automation Technology   7(6) 614-620   2013   [Refereed]
Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining
Pay Jun Liew, Keita SHIMADA, Masayoshi MIZUTANI, Jiwang Yan and Tsunemoto KURIYAGAWA
International Journal of Automation Technology   7(6) 621-629   2013   [Refereed]
Characteristics of Thick Film Deposition in Powder Jet Machining
Chihiro NISHIKAWA, Naohide MIZUKUCHI, Akihiko TOMIE, Keita SHIMADA, Masayoshi MIZUTANI, and Tsunemoto KURIYAGAWA
International Journal of Automation Technology   7(6) 630-637   2013   [Refereed]
Ultraprecision Glass Molding Press for Microgrooves with Different Pitch Sizes
Ryuichi Kobayashi, Tianfeng Zhou, Keita SHIMADA, Masayoshi MIZUTANI and Tsunemoto KURIYAGAWA
International Journal of Automation Technology   7(6) 678-685   2013   [Refereed]
冨江 瑛彦,久慈 千栄子,水口 直秀,西川 智弘,嶋田 慶太,泉田 一賢,赤塚 亮,佐々木 啓一,水谷 正義,厨川 常元
砥粒加工学会誌   57(12) 800-805   2013   [Refereed]
佐藤 慧,西川 智弘,萩原 隆行,嶋田 慶太,堀内 渉,松村 賢,赤塚 亮,佐々木 啓一,石崎 勉,荒川 正嘉,太田 一史,水谷 正義,厨川 常元
日本機械学会論文集(C編)   79(808) 4634-4642   2013   [Refereed]
BIOCOMPATIBILITY EVALUATION OF NANOSECOND LASER TREATED TITANIUM SURFACES
RYO HONDA, MASAYOSHI MIZUTANI, HITOSHI OHMORI, JUN KOMOTORI
International Journal of Modern Physics: Conference series   6 682-687   2012   [Refereed]
片平 和俊,水谷 正義,大森 整,小茂鳥 潤
砥粒加工学会誌   56(8) 539-544   2012   [Refereed]
Jeonghwa Kang, Makoto Sakuragi, Aya Shibata, Hiroshi Abe, Takashi Kitajima, Seiichi Tada, Masayoshi Mizutani, Hitoshi Ohmori, Hiroto Ayame, Tae Il Son, Toshiro Aigaki and Yoshihiro Ito
Materials Science and Engineering C   32 2552-2561   2012   [Refereed]
水谷 正義,小谷 拓嗣,成瀬 哲也,小茂鳥 潤,片平 和俊,大森 整,住谷 健二,和佐 宗樹,藤田 正弘,長谷川 正
精密工学会誌   77(6) 576-580   2011   [Refereed]
M. Mizutani, N. Hisamori, T. Mizuno, A. Ezura, I. Ohuchi, H. Ohmori, K. Fujiwara, K. Doi and K. Kuramoto
Advanced Materials Research   325 201-207   2011   [Refereed]
金澤 雄史, 伊藤 伸英, 根本 昭彦, 大森 整, 加藤 照子, 水谷 正義, 長谷川 勇治, 河野 直
砥粒加工学会誌   55(9) 552-556   2011   [Refereed]
井手上 敬,伊藤 伸英,小島 浩樹,大森 整,加藤 照子,水谷 正義,小茂鳥 潤,河野 直
砥粒加工学会誌   55(12) 744-745   2011   [Refereed]
水谷 正義,松村 有希子,小茂鳥 潤,玉内 秀一
日本機械学会論文集(A編)   77(784) 2144-2152   2011   [Refereed]
片平 和俊,赤羽 陽平,水谷 正義,小茂鳥 潤,大森 整
砥粒加工学会誌   54(6) 373-377   2010   [Refereed]
片平 和俊,齋藤 智之,小谷 拓嗣,小茂鳥 潤,成瀬 哲也,水谷 正義,大森 整
砥粒加工学会誌   54(6) 378-383   2010   [Refereed]
水谷 正義,菊池 将一,廣田 遥,小茂鳥 潤,大森 整,片平 和俊
日本機械学会論文集(A編)   76(764) 419-421   2010   [Refereed]
K. Katahira, H. Ohmori, J. Komotori, D. Dornfeld, H. Kotani, M. Mizutani
Annals of the CIRP   59 593-596   2010   [Refereed]
成瀬 哲也,上原 嘉宏,片平 和俊,水谷 正義,大森 整,小泉 仁
砥粒加工学会誌   53(2) 105-110   2009   [Refereed]
M. Mizutani, T Naruse, Y. Kameyama, Y. Koma, H. Ohmori, and C. Sasaki
Journal of Vacuum Science and Technology (JVST) B   27(3) 1367-1369   2009   [Refereed]
亀山 雄高,成瀬 哲也,水谷 正義,狛 豊,佐々木 慶子,大森 整,澤田 浩之,松木 則夫
日本機械学会論文集(C編)   75(757) 2456-2458   2009   [Refereed]
亀山 雄高,水谷 正義,成瀬 哲也,狛 豊,佐々木 慶子,大森 整,澤田 浩之,松木 則夫
砥粒加工学会誌   53(12) 741-744   2009   [Refereed]
堀内 麗子,小林 聖治,亀山 雄高,水谷 正義,小茂鳥 潤,勝山 一朗
材料と環境   58(8) 302-307   2009   [Refereed]
H. Ohmori, K. Katahira, J. Komotori, M. Mizutani
Annals of the CIRP   57 545-549   2008   [Refereed]
水谷 正義,山本 聡一,小茂鳥 潤,片平 和俊,大森 整
材料   57(9) 887-892   2008   [Refereed]
表面改質加工法によるチタン合金の表面機能制御
水谷 正義,小茂鳥 潤,片平 和俊,大森 整
材料試験技術   53(4) 254-260   2008   [Refereed]
片平 和俊,秋濃 裕香子,小茂鳥 潤,水谷 正義,大森 整
砥粒加工学会誌   51(3) 177-181   2007   [Refereed]
片平 和俊,齋藤 智之,水谷 正義,小茂鳥 潤,大森 整
砥粒加工学会誌   51(6) 333-338   2007   [Refereed]
H. Ohmori, K. Katahira, T. Naruse, Y. Uehara, A. Nakao, M. Mizutani
Annals of the CIRP   56(1) 569-572   2007   [Refereed]
片平 和俊,水谷 正義,齋藤 智之,小茂鳥 潤,上原 嘉宏,大森 整
砥粒加工学会誌   50(3) 124-129   2006   [Refereed]
片平 和俊,前濱 文人,小茂鳥 潤,水谷 正義,大森 整,西口 晃,岩木 正哉,進藤 久宜,島崎景正
砥粒加工学会誌   49(3) 152-156   2005   [Refereed]
Investigation of Substrate Finishing Conditions to Improve Adhesive Strength of DLC Films
H. Ohmori, K. Katahira, J. Komotori, M. Mizutani, F. Maehama, M. Iwaki
Annals of the CIRP   54(1) 511-514   2005   [Refereed]
水谷 正義,小茂鳥 潤,永田 仁,片平 和俊,大森 整
材料   54(11) 1178-1183   2005   [Refereed]
電気化学反応を利用した表面改質加工技術に関する研究 ―被加工物に対する電流印加の影響―
水谷 正義,小茂鳥 潤,片平 和俊,伊藤 伸英, 大森 整,根本 昭彦
砥粒加工学会誌   48(7) 387-391   2004   [Refereed]
Fabrication of High-Quality Surfaces on Micro Tools by the ELID Grinding Technique
K. Katahira, H. Ohmori, Y. Uehara, Y. Watanabe, W. Lin, J. Komotori and M. Mizutani
Key Engineering Materials   257-258 441-446   2004   [Refereed]
Improvement of Corrosion Resistance and Mechanical Properties of the Biomaterial Ti-6Al-4V Alloy by ELID Grinding
M. Mizutani, J. Komotori, K. Katahira, Y. Watanabe and H. Ohmori
Key Engineering Materials   257-258 473-476   2004   [Refereed]
Effect of ELID Grinding on Fatigue Properties of Stainless Steel
Fumihito MAEHAMA, Masayoshi MIZUTANI, Jun KOMOTORI, Kazutoshi KATAHIRA, Yutaka WATANABE and Hitoshi OHMORI
Journal of Material Testing Research Association of Japan   48(4) 237-240   2003   [Refereed]
水谷 正義,小茂鳥 潤,片平 和俊,渡邉 裕,大森 整
精密工学会誌   69(12) 1744-1748   2003   [Refereed]
Improvement of Corrosion Resistance in Metallic Biomaterials using a New Electrical Grinding Technique
H. Ohmori, K. Katahira, J. Nagata, M. Mizutani, J. Komotori
Annals of the CIRP   51(1) 491-494   2002   [Refereed]

Misc

 
小林敏, 立花亨, 村越親, 小池一徳, 厨川常元, 水谷正義
砥粒加工学会誌   62(2) 63‐66   Feb 2018
Masayoshi Mizutani
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering   84 840-844   Jan 2018
水谷正義, 嶋田慶太, 厨川常元
レーザ協会誌   42(3) 7‐15   Dec 2017
Keita Shimada, Ryu Iwadate, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017      Nov 2017
Ultrasonic vibration assisted (UV) cutting is a well-known method to lower the cutting force and to improve the surface integrity, and elliptical vibration (EV) cutting is one of the most significant application methods for difficult-to-machine ma...
水谷正義, 嶋田慶太, 厨川常元
機械の研究   69(11) 909‐917   Nov 2017
Masayoshi Mizutani, Tsunemoto Kuriyagawa
International Journal of Automation Technology   11 861   Nov 2017
Yoshiki Okada, Nobuhiro Abe, Noriyuki Hisamori, Toshiaki Kaneeda, Shigeaki Moriyama, Hitoshi Ohmori, Masayoshi Mizutani, Hiroyuki Yanai, Yoshio Nakashima, Yusuke Yokoyama, Toshifumi Ozaki
Acta Medica Okayama   71 49-57   Jan 2017
© 2017 by Okayama University Medical School. Metals have been used clinically as biomaterials, especially in the orthopaedic and dental fields. Metals used as implants wear at contact surfaces, producing metal particles and metal ions that may be ...
Keita Shimada, Ayaka Watanabe, Yoshifumi Takasu, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Materials Science Forum   874 91-96   Jan 2016
© 2016 Trans Tech Publications, Switzerland. Advanced semiconductor materials including silicon carbide and gallium nitride possess excellent properties like high hardness, and high heat and chemical resistance compared to silicon. Such properties...
王 静思,嶋田 慶太,水谷 正義,厨川 常元
精密工学会誌   82(5) 422-425   Jan 2016
超音波テクスチャリングによる微細構造創成
徐 小林,嶋田 慶太,水谷 正義,厨川 常元
超音波 TECHNO   28(6) 51-54   2016
Nobuyuki Sumi, Chihiro Kato, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015      Oct 2015
We investigated influence of iron-based workpiece materials on the characteristics of the Si layers by electrical discharge coating. It was found that the chemical elements of the precipitations were uniformly dispersed in the layer on the workpie...
Shuhei Kodama, Akihiro Shibata, Shinya Suzuki, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Proceedings of the 8th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2015      Oct 2015
Ultrashort-pulsed laser irradiation is a more efficient approach for fabricating fine surface structures than traditional processing methods. However, it has some problems that the equipment expenses usually increase with shortening of the pulse l...
Akihiro Shibata, Naoto Kaneko, Shinya Suzuki, Shuhei Kodama, Jun Shimizu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa
Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering   81 862-866   Sep 2015
Nanostructure processing method with high productivity is desired for many practical uses. Recent studies report that femtosecond laser process is expected as one of high productive process. By irradiating femtosecond laser to the polished target ...
大森 整,片平 和俊,水谷 正義,小茂鳥 潤
精密工学会誌   81(12) 1067-1072   Jan 2015
水谷 正義,小茂鳥 潤,徐 少林,嶋田 慶太,厨川 常元
精密工学会誌   81(12) 1073-1077   Jan 2015
レーザ照射による骨親和表面の創成
水谷 正義
日本機械学会誌   118(1160) 424-424   2015
嶋田 慶太,水谷 正義,厨川 常元
精密工学会誌   80(9) 807-810   Sep 2014
大塚 雄市,水谷 正義
材料   63(6) 480-486   Jan 2014
Masayoshi Mizutani
Proceedings - IEEE 10th International Conference on Services Computing, SCC 2013   595-602   Dec 2013
In modern computer system, system logs are important for problem determination in troubleshooting. Especially in the troubleshooting of systems, system administrators need to understand overview of the problems and identify the root causes quickly...
Masayoshi Mizutani, Ryo Honda, Yuta Kurashina, Jun Komotori, Hitoshi Ohmori
International Journal of Automation Technology   8 102-109   Dec 2013
In this study, we developed a surface modification technology for implants using commercially pure (cp) Ti. The technology used in this study leads to reduction in the time required for adhesion between bone and surfaces of implants. The existence...
大森 整,春日 博,上原 嘉宏,加藤 照子,水谷 正義,伊藤 伸英,江面 篤志,国村 伸祐,亀山 雄高
精密工学会誌   79(4) 278-285   Jan 2013
ELID研削法による超平滑加工および形状加工事例
大森 整,春日 博,加藤 照子,上原 嘉宏,伊藤 伸英,亀山 雄高,江面 篤志,水谷 正義
機械と工具   3(2) 78-82   2013
Keiji Takeda, Masayoshi Mizutani
Proceedings - International Carnahan Conference on Security Technology      Dec 2011
In this paper, design of a framework for malware collection and analysis is described. The framework enables researchers to collect malware samples for analysis continuously, to develop counter measures and to generate pattern signatures for detec...
Kazutoshi Katahira, Hitoshi Ohmori, Masayoshi Mizutani, Jun Komotori
International Journal of Modern Physics B   24 3005-3010   Jun 2010
To investigate the possibility of developing a new surface modification method by the combined process of ELID grinding and high-temperature oxidization, we treated ELID finished specimens and polished specimens by high-temperature oxidization in ...
ELID研削によるTiの発色加工
大森 整,片平 和俊,水谷 正義,小茂鳥 潤
砥粒加工学会誌   54(9) 532-535   2010
水谷 正義,赤羽 陽平,小茂鳥 潤,片平 和俊,大森 整
成形加工   22(5) 237-240   2010
Masayoshi Mizutani, Noriyuki Hisamori, Takafumi Mizuno, Hitoshi Ohmori
Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009      Dec 2009
To clarify the damage accumulation mechanism of Co-Cr alloys exposed to simultaneous corrosion and wear in sodium chloride, we developed a new tribo-corrosion system and then evaluated corrosion wear characteristics of the alloys with special atte...
Hiroshi Kotani, Jun Komotori, Masayoshi Mizutani, Tetsuya Naruse, Kazutoshi Katahira, Hitoshi Ohmori
Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2009      Dec 2009
In this study, in order to improve wear and corrosion resistance of Co-Cr-Mo alloy, investigation of surface modification effects of ELID grinding were carried out. ASTM F1537 Co-Cr-Mo alloy samples were fabricated by ELID grinding with different ...
Masayoshi Mizutani, Keiji Takeda, Jun Murai
Proceedings of the 2009 ACM Conference on Emerging Networking Experiments and Technologies, CoNEXT'09 - Co-located Student Workshop, CoNext Student Workshop '09   57-58   Dec 2009
H. Ohmori, K. Katahira, J. Komotori, Y. Akahane, M. Mizutani, T. Naruse
CIRP Annals - Manufacturing Technology   58 503-506   Apr 2009
In the present study, electrolytic in-process dressing grinding was performed on surgical steels (type 420J2 stainless steel) and the processing characteristics and resulting surface properties were evaluated. In particular, we used different grin...
Masayoshi Mizutani, Shin Shirahata, Masaki Minami, Jun Murai
Proceedings - 2008 International Symposium on Applications and the Internet, SAINT 2008   48-54   Oct 2008
We have implemented Multi-Session based Network Security Event Detector: ROOK to detect botnet activity and P2P file sharing traffic and our results show that our method is less false positives than existing network security event detectors (e.g. ...
Hitoshi Ohmori, Tetsuya Naruse, Yoshihiro Uehara, Yutaka Kameyama, Kazu Ando, Masayoshi Mizutani, Kazutoshi Katahira, Chikako Sasaki
ICSMA 2008 - International Conference on Smart Manufacturing Application   1-4   Sep 2008
In recent years, more and more ultra-fine machining necessities are increasing for micro-parts and micro-components fabrication. Although down-sizing of tools are tried for micro-machining, it is not easy to realize smart fabrication because sensi...
超精密デスクトップ加工システムによるマイクロ加工
大森 整,上原 嘉宏,成瀬 哲也,片平 和俊,水谷 正義
機械と工具   52(7) 15-19   2008
Tetsuya Naruse, Kazu Andou, Yutaka Kameyama, Masayoshi Mizutani, Yoshihiro Uehara, Kazutoshi Katahira, Weimin Lin, Chikako Sasaki, Hitoshi Ohmori
LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings      Dec 2007
Miniaturization and weight reduction of portable audiovisual equipments, palmtop computers and mobile phones is being urgently pursued, increasing the demand for miniaturized and highly functional electronic devices, optical devices and mechanical...
Masayoshi Mizutani, Noriyuki Hisamori, Takafumi Mizuno, Hitoshi Ohmori, Kazutoshi Katahira, Jun Komotori
LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings      Dec 2007
Co-Cr alloy used as a biomaterial is required to possess an excellent resistance to corrosion, wear, and biocompatibility. In addition, it needs to have a mirror-like surface finish for improvement of chemical stability. In the present work, we pe...
Kazutoshi Katahira, Hitoshi Ohmori, Tomoyuki Saito, Jun Komotori, Masayoshi Mizutani
LEM 2007 - 4th International Conference on Leading Edge Manufacturing in 21st Century, Proceedings      Dec 2007
In this study, we have performed efficient and high-precision grinding of cemented carbide alloys with a newly developed grinding wheel, and investigated the ground surface characteristics in detail. The processing results showed that final finish...
K. Katahira, H. Ohmori, T. Saito, J. Komotori, M. Mizutani
Proceedings of the 7th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2007   2 441-444   Jan 2007
In this study, we have performed efficient and high-precision grinding of cemented carbide alloys with a newly developed grinding wheel, and investigated the ground surface characteristics in detail. The processing results showed that final finish...
ELIDを基盤的手法とした表面改質加工とその効果
大森 整,片平 和俊,水谷 正義,渡邉 裕
トライボロジー   5(237) 70-72   2007
Masayoshi Mizutani, Jun Komotori, Kazutoshi Katahira, Hitoshi Ohmori
International Journal of Modern Physics B   20 3605-3610   Oct 2006
The biocompatibility of titanium implants with different surface properties is investigated. We prepared three types of specimens, one ground by the newly developed ELID grinding system, another ground by conventional ELID grinding, and the other ...
Masayoshi Mizutani, Shin Shirahata, Masaki Minami, Jun Murai
Electronics and Communications in Japan, Part I: Communications (English translation of Denshi Tsushin Gakkai Ronbunshi)   89 46-58   Mar 2006
One of the techniques for detecting malicious communications from network traffic is to use a network-based intrusion detection system (IDS). However, since an existing IDS handles a low-risk alert for which an attack failed and a high-risk alert ...
K. Katahira, H. Ohmori, Y. Uehara, A. Nakao, T. Saito, M. Mizutani, J. Komotori
Proceedings of the 6th International Conference European Society for Precision Engineering and Nanotechnology, EUSPEN 2006   2 148-151   Jan 2006
To investigate the possibility of developing a new surface modification method by the combined process of ELID grinding and high-temperature oxidization, we treated ELID finished specimens and polished specimens by high-temperature oxidization in ...
H. Ohmori, K. Katahira, Y. Akinou, J. Komotori, M. Mizutani
CIRP Annals - Manufacturing Technology   55 597-600   Jan 2006
Co-Cr alloy used as a biomaterial is required to possess excellent resistance to corrosion, wear, and biocompatibility. In the present work, we performed Electrolytic In-Process Dressing grinding on Co-Cr alloy, and evaluated the processing charac...
バイオマテリアルのための新しい表面改質加工法の開発
水谷 正義,片平 和俊
日本機械学会誌   109(1052) 582   2006
生体材料のための微細表面改質加工
小茂鳥 潤,水谷 正義,片平 和俊,大森 整
科学と工業   80(11) 519-524   2006
Kazutoshi Katahira, Hitoski Ohmori, Jim Komotori, Masayoshi Mizutani, Fumihito Maehama, Masaya Iwaki
LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century   219-224   Dec 2005
This study investigated the effects of grinding wheels on the surface modification properties in Electrolytic In-process Dressing grinding. Three specimens were ground with different abrasive grinding wheels: diamond wheel, SiO2 wheel, and diamond...
Masayoshi Mizutani, Jim Komotori, Kaziitoshi Katahira, Hitoshi Ohmori
LEM 2005 - 3rd International Conference on Leading Edge Manufacturing in 21st Century   213-218   Dec 2005
In order to develop a new ELED grinding system as a surface fabrication process for metallic biomaterials such as a Ti-6A1-4V alloy, ground surfaces were analyzed by using a TEM. XPS and a Nano-Hardness Tester (NHT). Chemical stability was examine...
Masayoshi Mizutani, Jun Komotori, Kazutoshi Katahira, Hitoshi Ohmori
11th International Conference on Fracture 2005, ICF11   3 1629-1634   Dec 2005
Metallic biomaterials, such as titanium alloys and stainless steels, require enhanced chemical stability, which is dependent on the quality and thickness of the oxide layer on a material surface. Therefore, if we can form a thick and stable oxide ...
Jun Komotori, Masayoshi Mizutani, Hitoshi Ohmori, Kazutoshi Katahira
Toraibarojisuto/Journal of Japanese Society of Tribologists   50 584-589   Oct 2005
K. Katahira, M. Mizutani, Y. Akinou, J. Komotori, H. Ohmori, Y. Uehara
EUSPEN 2005 - Proceedings of the 5th International Conference of the European Society for Precision Engineering and Nanotechnology   541-544   Jan 2005
Co-Cr alloy used as a biomaterial is required to possess excellent resistance to corrosion, wear, and corrosion fatigue. In addition, it needs to have a mirror-like surface finish for improved chemical stability. In the present work, we performed ...

Books etc

 
Masayoshi Mizutani, Shaolin Xu, Keita Shimada, and Tsunemoto Kuriyagawa (Part:Joint Work, Micro/Nano Technologies, Vol. 1, 247-299)
Springer   2018   ISBN:9789811300974
ELECTROLYTIC IN-PROCESS DRESSING (ELID) TECHNOLOGIES
Hitoshi Ohmori, Ioan D. Marinescu, Kazutoshi Katahira, Yutaka Watanabe, Hiroshi Kasuga, Jun Komotori, Shaohui Yin, Masayoshi Mizutani, and Tetsuya Naruse (Part:Joint Work, Chapter 9. ELID Grinding Applications)
CRC Press, Taylor & Francis Group   2011   ISBN:978143980036