BAI Yu (Yu Bai) - マイポータル

Influence of Fe addition in CP titanium on phase transformation, microstructure and mechanical properties during high pressure torsion

Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

JOURNAL OF ALLOYS AND COMPOUNDS 822 ARTN 153604 2020年5月査読有り

Termination of local strain concentration led to better tensile ductility in multilayered 2N/4N Al sheet

Xiaojuan Jiang, Yu Bai, Ling Zhang, Guilin Wu, Si Gao, Xiaoxu Huang, Nobihiro Tsuji

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 782 ARTN 139240 2020年4月査読有り

Effect of Cobalt-Content on Mechanical Properties of Non-Equiatomic Co-Cr-Ni Medium Entropy Alloys

Shuhei Yoshida, Takuto Ikeuchi, Yu Bai, Nobuhiro Tsuji

MATERIALS TRANSACTIONS 61(4) 587-595 2020年査読有り

ハイエントロピー合金の結晶粒超微細化

吉田周平, 池内琢人, Tilak BHATTACHARJEE, Yu BAI, 柴田曉伸, 辻伸泰

粉体および粉末冶金 67(3) 113-120 2020年査読有り

Linking local and heterogeneous deformation behavior to global deformation of materials by in-situ experimental techniques

N. Tsuji, M. Park, S. Gao, Y. Bai, Y. Chong

Proceedings of the 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D 155-165 2019年9月査読有り

Deformation microstructures and strength of face-centered cubic high/medium entropy alloys

S. Yoshida, T. Ikeuchi, Y. Bai, A. Shibata, N. Hansen, X. Huang, N. Tsuji

Proceedings of the 40th Riso International Symposium on Materials Science: Metal Microstructures in 2D, 3D and 4D 523-528 2019年9月査読有り

Formation Mechanism of Ultrafine Grained Microstructures: Various Possibilities for Fabricating Bulk Nanostructured Metals and Alloys

Nobuhiro Tsuji, Reza Gholizadeh, Rintaro Ueji, Naoya Kamikawa, Lijia Zhao, Yanzhong Tian, Yu Bai, Akinobu Shibata

MATERIALS TRANSACTIONS 60(8) 1518-1532 2019年8月査読有り

Effect of elemental combination on friction stress and Hall-Petch relationship in face-centered cubic high / medium entropy alloys

Shuhei Yoshida, Takuto Ikeuchi, Tilak Bhattacharjee, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

ACTA MATERIALIA 171 201-215 2019年6月査読有り

Evaluation of serration behaviors in 22Mn-0.6C steel with various grain sizes

Sukyoung Hwang, Yu Bai, Myeong-Heom Park, Akinobu Shibata, Nobuhiro Tsuj

Proceedings of 4th International Conference on Medium and High Manganese Steel 141-144 2019年4月査読有り

Mechanism of huge Luders-type deformation in ultrafine grained austenitic stainless steel

Si Gao, Yu Bai, Ruixiao Zheng, Yanzhong Tian, Wenqi Mao, Akinobu Shibata, Nobuhiro Tsuji

SCRIPTA MATERIALIA 159 28-32 2019年1月査読有り

Mechanism of huge Lüders-type deformation in ultrafine grained austenitic stainless steel

Si Gao, Yu Bai, Ruixiao Zheng, Yanzhong Tian, Wenqi Mao, Akinobu Shibata, Nobuhiro Tsuji

SCRIPTA MATERIALIA 159 28-32 2019年1月査読有り

Effect of Thermo-Mechanical Processing on Microstructure Evolution and Mechanical Property in 3Mn-0.1C Medium Manganese Steel

Feifei Hou, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

Proceedings of 4th International Conference on Medium and High Manganese Steel, 53-56 2019年1月査読有り

Effect of thermomechanical processing at alpha plus gamma two-phase temperatures on microstructure and mechanical property of 5Mn-0.1C-2Si medium-manganese steel

Yu Bai, Yoichiro Matsui, Akinobu Shibata, Nobuhiro Tsuji

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 743 57-66 2019年1月査読有り

Microstructure Evolution and Change in Mechanical Properties of Medium Mn Steels during Thermomechanical Processing

Feifei Hou, Atsushi Ito, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS 941 346-351 2018年12月査読有り

Hydrogen embrittlement behaviors of ultrafine-grained 22Mn-0.6C austenitic twinning induced plasticity steel

Yu Bai, Yanzhong Tian, Si Gao, Akinobu Shibata, Nobuhiro Tsuji

JOURNAL OF MATERIALS RESEARCH 32(24) 4592-4604 2017年12月査読有り

Friction stress and Hall-Petch relationship in CoCrNi equi-atomic medium entropy alloy processed by severe plastic deformation and subsequent annealing

Shuhei Yoshida, Tilak Bhattacharjee, Yu Bai, Nobuhiro Tsuji

SCRIPTA MATERIALIA 134 33-36 2017年6月査読有り

A novel ultrafine-grained Fe-22Mn-0.6C TWIP steel with superior strength and ductility

Y. Z. Tian, Y. Bai, L. J. Zhao, S. Gao, H. K. Yang, A. Shibata, Z. F. Zhang, N. Tsuji

MATERIALS CHARACTERIZATION 126 74-80 2017年4月査読有り

Characterization of microstructure and mechanical property of pure titanium with different Fe addition processed by severe plastic deformation and subsequent annealing

Guanyu Deng, Tilak Bhattacharjee, Yan Chong, Ruixiao Zheng, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION 194 UNSP 012020 2017年

Microstructures and mechanical property of a Fe-Ni-Al-C alloy containing B2 intermetallic compounds

Si Gao, Yu Bai, Akinobu Shibata, Nobuhiro Tsuji

38TH RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE 219 UNSP 012020 2017年査読有り

Effect of grain refinement on hydrogen embrittlement behaviors of high-Mn TWIP steel

Y. Bai, Y. Momotani, M. C. Chen, A. Shibata, N. Tsuji

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 651 935-944 2016年1月査読有り

BAI Yu

基本情報

論文

メニュー