MINE Yoji

J-GLOBAL         Last updated: Aug 27, 2019 at 12:56
 
Avatar
Name
MINE Yoji
Affiliation
Kumamoto University
Section
Unregistered
Job title
Associate Professor

Research Interests

 
 

Academic & Professional Experience

 
Apr 2018
 - 
Today
Professor, Department of Materials Science and Engineering, Kumamoto University
 
2012
   
 
 Associate Professor, ,Graduate School of Science and Technology(Engineering group),Kumamoto University
 

Published Papers

 
Shohei Ueki, Takuya Matsumura, Yoji Mine, Shigekazu Morito, Kazuki Takashima
Scripta Materialia   173 80-85   Dec 2019
© 2019 Elsevier Ltd Fatigue crack growth in single-packet structures with different habit-plane orientations was examined using miniature compact-tension specimens of ultra-low carbon steel to elucidate the elementary process of microstructural cr...
Kosuke Takagi, Tsuyoshi Mayama, Yoji Mine, Yu Lung Chiu, Kazuki Takashima
Journal of Alloys and Compounds   806 1384-1393   Oct 2019
© 2019 Elsevier B.V. The deformation behaviour of single crystals of an Mg85Zn6Y9 alloy with an 18R-LPSO structure was experimentally and numerically investigated using a micro-tensile testing method and a crystal plasticity finite element method,...
Yoji Mine, Shunsuke Katashima, Rengen Ding, Paul Bowen, Kazuki Takashima
Scripta Materialia   165 107-111   May 2019
© 2019 Elsevier Ltd Microstructural fatigue crack growth in Ti–6Al–4V lamellar colonies was examined using small compact-tension specimens, with post-fatigue-test transmission electron microscopy for a mechanistic understanding of the anisotropy. ...
W. S. Chuang, J. C. Huang, J. C. Huang, P. H. Lin, C. H. Hsieh, Y. H. Lin, K. Takagi, Y. Mine, K. Takashima
Journal of Alloys and Compounds   772 288-297   Jan 2019
© 2018 Elsevier B.V. A promising Mg-Zn-Y alloy with the long-period stacking ordered (LPSO) second phase has been developed for about twenty years. Because the LPSO phase has the unique 18R crystal structure, particularly for its packing sequence ...
Shohei Ueki, Kaoru Koga, Yoji Mine, Kazuki Takashima
ISIJ International   59 927-934   Jan 2019
© 2019 ISIJ. Micro-tensile behaviour and the corresponding microstructural evolution under hydrogen pre-charging conditions were examined on single-crystalline and twinned bi-crystalline specimens with the same [111] loading axis to elucidate the ...
Shinya Hosokawa, Koji Kimura, Koji Kimura, Jens Rüdiger Stellhorn, Koji Yoshida, Koji Hagihara, Hitoshi Izuno, Hitoshi Izuno, Michiaki Yamasaki, Michiaki Yamasaki, Yoshihito Kawamura, Yoshihito Kawamura, Yoji Mine, Kazuki Takashima, Hiroshi Uchiyama, Satoshi Tsutsui, Akihide Koura, Fuyuki Shimojo
Acta Materialia   146 273-279   Mar 2018   [Refereed]
© 2018 Acta Materialia Inc. Inelastic X-ray scattering (IXS) experiments were carried out at room temperature at BL35XU of the SPring-8 on a single crystal Mg 85 Zn 6 Y 9 alloy with a synchronized long-period stacking ordered (LPSO) phase of purel...
Kataoka Minami, Jeong Sang-Sun, Obara Yuzo, Yoshinaga Toru, Mine Yoji, Takashima Kazuki
GEOTECHNICAL TESTING JOURNAL   41(6) 1092-1101   Nov 2018   [Refereed]
Yin Htwe, Kwangsik Kwak, Daichi Kishi, Yoji Mine, Rengen Ding, Paul Bowen, Kazuki Takashima
Materials Science and Engineering A   715 315-319   Feb 2018   [Refereed]
© 2018 Elsevier B.V. Micro-tensile tests on single-colony specimens of Ti–6Al–4V alloy with a fine lamellar microstructure revealed that the critical resolved shear stress of the basal slip was lower than that of the prismatic slip. This has been ...
Daichi Kishi, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Scripta Materialia   142 1-5   Jan 2018   [Refereed]
© 2017 Acta Materialia Inc. To study the relationship between the plasticity and intergranular fracture of FeCo intermetallic alloys, small, single- and bi-crystalline specimens were subjected to micro-tensile testing and crystal plasticity finite...
Shohei Ueki, Yoji Mine, Kazuki Takashima
Corrosion Science   129 205-213   Dec 2017   [Refereed]
© 2017 Elsevier Ltd This study focused on the martensitic transformation during fatigue crack growth in twinned crystals using small compact-tension specimens to elucidate the hydrogen-induced twin boundary separation in type 304 stainless steel. ...
W. S. Chuang, C. H. Hsieh, J. C. Huang, J. C. Huang, P. H. Lin, K. Takagi, Y. Mine, K. Takashima
Intermetallics   91 110-119   Dec 2017
© 2017 Elsevier Ltd With the long-period stacking ordered (LPSO) second phase, the promising mechanical properties of the Mg-Zn-Y alloys have been demonstrated. Because the LPSO phase plays an important role in strengthening mechanisms and it has ...
Yoji Mine, Ryo Maezono, Tsuyoshi Mayama, Jing Wu, Yu Lung Chiu, Paul Bowen, Kazuki Takashima
Journal of Alloys and Compounds   718 433-442   Sep 2017   [Refereed]
© 2017 Elsevier B.V. Micro-bending tests were performed on single-crystalline cantilever beams of long-period stacking ordered (LPSO) structures of Mg 85 Zn 6 Y 9 alloy with and without a notch to study crystal plasticity and cracking behaviour u...
Yoji Mine, Nobuaki Horita, Zenji Horita, Zenji Horita, Kazuki Takashima
International Journal of Hydrogen Energy   42(22) 15415-15425   Jun 2017   [Refereed]
© 2017 Hydrogen Energy Publications LLC Micro-tensile tests were performed on high-pressure-torsion-processed specimens of type 304 steel with grain sizes in the range of 0.1–0.5 μm to clarify the effect of ultrafine grain refinement on the hydrog...
Shinya Ogata, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Materials Science and Engineering A   689 353-365   Mar 2017   [Refereed]
© 2017 Elsevier B.V.The influence of microstructural evolution on the strain hardening and non-uniform deformation behaviour of pre-strained ferrite-martensite DP steel was studied using a crystal plasticity finite element method (CPFEM). The mate...
T. Schwark, M. Müller, Y. Mine, T. Kreuter, O. Kraft, R. Schwaiger
Praktische Metallographie/Practical Metallography   54 366-387   Jun 2017   [Refereed]
© Carl Hanser Verlag, München. Soft Magnetic Composites (SMC) consist of pure iron particles with an inorganic phosphorous coating and an additional iron oxide layer at the boundaries between them. It should be specified if the iron oxide is at th...
Kwangsik Kwak, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
ISIJ International   56(12) 2313-2319   Dec 2016   [Refereed]
© 2016 ISIJ.Micro-tensile testing and numerical analysis using a crystal plasticity finite element method (CPFEM) were employed to elucidate the deformation behaviour of bainite/martensite structures of a low-alloy steel. The bainite single-phase ...
Tatsuo Yokoi, Hiroshi Shuto, Ken Ichi Ikeda, Nobuo Nakada, Toshihiro Tsuchiyama, Takahito Ohmura, Yoji Mine, Kazuki Takashima
ISIJ International   56(11) 2068-2076   Nov 2016   [Refereed]
© 2016 ISIJ.Dual Phase (DP) steel is used in automotive body parts for weight saving and crashworthiness, however there is an issue of DP steel in low stretch flange ability evaluated by hole expanding tests. In order to improve stretch flange abi...
Shinya Ogata, Yoji Mine, Kazuki Takashima, Takahito Ohmura, Hiroshi Shuto, Tatsuo Yokoi
ISIJ International   56(11) 2084-2092   Nov 2016   [Refereed]
© 2016 ISIJ.The deformation behavior of inhomogeneous microstructures developed by pre-straining was studied by micro-tensile testing to elucidate the cause of low hole expandability of ferrite-martensite dual-phase (DP) steels. Slip bands develop...
Yoji Mine, Shoki Nakamichi, Kaoru Koga, Kazuki Takashima, Oliver Kraft
Materials Science and Engineering A   675 181-191   Oct 2016   [Refereed]
© 2016 Elsevier B.V.The deformation behaviour of an Fe–19Cr–16Ni austenitic alloy was studied by micro-tensile testing of small-scale single crystals. A detailed comparison of specimens with and without nano-twins was conducted. The study revealed...
Kwangsik Kwak, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Materials Science and Engineering A   674 104-116   Sep 2016   [Refereed]
© 2016 Elsevier B.V.Microtensile testing with a crystal plasticity analysis was employed using single block structured specimens to elucidate the anisotropic plasticity of lath martensite steel. Habit-plane-orientation-dependent yielding occurred ...
Makoto Tokuda, Tsutomu Mashimo, Jahirul Islam Khandaker, Yudai Ogata, Yoji Mine, Shinya Hayami, Akira Yoshiasa
Journal of Materials Science   51(17) 7899-7906   Sep 2016   [Refereed]
© 2016, Springer Science+Business Media New York.We report the effect of a strong gravitational field on oriented crystalline perovskite-type manganese oxide La1−xSrxMnO3 (LSMO). The perovskite-type manganese oxides La1−xSrxMnO3 (LSMO) have been i...
Takashi Ito, Yoji Mine, Masaaki Otsu, Kazuki Takashima
Materials Transactions   57(8) 1252-1256   Aug 2016   [Refereed]
© 2016 The Japan Institute of Metals and Materials.A scanning white-light interferometry (SWLI) technique was used to image the surface topography and measure the in-plane strain in micrometre-sized structures subjected to uniaxial tensile deforma...
Kwangsik Kwak, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan   102(6) 304-310   Jun 2016   [Refereed]
Micro-tensile testing combined with analysis using a crystal plasticity finite element method (CPFEM) was employed to elucidate the deformation behaviour of bainite/martensite structures of a low alloy steel. The bainite single phase specimens exh...
Yoji Mine, Daisuke Haraguchi, Takahiro Ideguchi, Nobuaki Horita, Zenji Horita, Zenji Horita, Kazuki Takashima
ISIJ International   56(6) 1083-1090   Jun 2016   [Refereed]
© 2016 ISIJ.The effect of hydrogen on the plasticity of ultrafine-grained austenite was studied on type 304, 316L, and 310S stainless steels processed by high-pressure torsion at moderate temperature. Like austenitic steels with ordinary grain siz...
Tatsuo Yokoi, Hiroshi Shuto, Ken Ichi Ikeda, Nobuo Nakada, Toshihiro Tsuchiyama, Takahito Ohmura, Yoji Mine, Kazuki Takashima
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan   102(5) 244-252   May 2016   [Refereed]
Dual Phase (DP) steel is used in automotive body parts for weight saving and crashworthiness, however there is an issue of DP steel in low stretch flange ability evaluated by hole expanding tests. In order to improve stretch flange ability of DP s...
Shinya Ogata, Yoji Mine, Kazuki Takashima, Takahito Ohmura, Hiroshi Shuto, Tatsuo Yokoi
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan   102(5) 260-267   May 2016   [Refereed]
The deformation behavior of inhomogeneous microstructures developed by pre-straining was studied by micro-tensile testing to elucidate the cause of low hole expandability of ferrite-martensite dual-phase (DP) steels. Slip bands developed in the fe...
Yoji Mine, Kaoru Koga, Kazuki Takashima, Zenji Horita, Zenji Horita
Materials Science and Engineering A   661 87-95   Apr 2016   [Refereed]
© 2016 Elsevier B.V..Micro-tensile tests were employed on a 304 metastable austenitic stainless steel to mechanically characterise the microstructures developed by processing through high-pressure torsion (HPT) with and without hydrogen pre-chargi...
Yoji Mine, Kaoru Koga, Kaoru Koga, Oliver Kraft, Kazuki Takashima
Scripta Materialia   113 176-179   Mar 2016   [Refereed]
© 2015 Elsevier Ltd. All rights reserved.Micro-tensile tests were performed using single- and twinned bi-crystals with and without hydrogen pre-charging in a metastable austenitic steel to elucidate the occurrence of hydrogen-induced quasi-cleavag...
峯洋二, 高島和希
検査技術   21(2) 1-5   Feb 2016   [Invited]
T. Ito, Y. Mine, M. Otsu, K. Takashima
Journal of Japan Institute of Metals and Materials   80(1) 22-26   Jan 2016   [Refereed]
© 2015 The Japan Institute of Metals and Materials.A scanning white-light interferometry (SWLI) technique was used to image the surface topography and measure the inplane strain in micrometre-sized structures subjected to uniaxial tensile deformat...
Yoji Mine, Ryo Maezono, Hiroaki Oda, Hiroaki Oda, Michiaki Yamasaki, Yoshihito Kawamura, Kazuki Takashima
Materials Transactions   56(7) 952-956   Jul 2015   [Refereed]
© 2015 The Japan Institute of Metals and Materials.Microtension tests were performed on single crystals with different crystallographic orientations, which were prepared using an 18R-type long-period stacking ordered (LPSO) structure in a directio...
Yoji Mine, Daisuke Haraguchi, Zenji Horita, Zenji Horita, Kazuki Takashima
Philosophical Magazine Letters   95(5) 269-276   Jan 2015   [Refereed]
© 2015 Taylor & Francis.We subjected samples of a 304 metastable austenitic stainless steel to high-pressure torsion (HPT) in the temperature range of 303-573 K, (i.e. at different austenite stabilities), to examine their microstructures and mecha...
Yoji Mine, Hiroki Takashima, Mitsuhiro Matsuda, Kazuki Takashima
Materials Science and Engineering A   618 359-367   Sep 2014   [Refereed]
© 2014 Elsevier B.V.Microtension testing of an Fe-30Ni alloy revealed that yielding in the lenticular martensite plates is not necessarily caused by the slip system with the highest Schmid factor. Dislocation gliding likely occurred on the slip sy...
Yoji Mine, Hajime Yoshimura, Hajime Yoshimura, Mitsuhiro Matsuda, Kazuki Takashima, Yoshihito Kawamura, Yoshihito Kawamura
Materials Science and Engineering A   570 63-69   May 2013   [Refereed]
We studied the fracture behaviour of extruded Mg-Zn-Y alloys at room temperature (RT) and at 523K using microfracture testing. An Mg97Zn1Y2 alloy was used to obtain two-phase specimens consisting of α-Mg and long-period stacking ordered (LPSO) str...
Yoji Mine, Koichi Hirashita, Koichi Hirashita, Hiroki Takashima, Mitsuhiro Matsuda, Kazuki Takashima
Materials Science and Engineering A   560 535-544   Jan 2013   [Refereed]
A micro-tension testing technique was used to investigate the deformation behaviour of lath martensite structures with several types of boundaries in carbon steel. The martensite structures exhibited sufficient necking strains and ductile fracture...
Vladyslav M. Shyvaniuk, Yoji Mine, Sergiy M. Teus
Scripta Materialia   67(12) 979-982   Dec 2012   [Refereed]
The effect of hydrogen on strain-induced γ → α′ transformation in type 304 steel and on the microstructure of prestrained material was studied. Hydrogenation at 543 K under a pressure of 100 MPa prevents the formation of α′-phase during tensile st...
Yoji Mine, Zenji Horita
Materials Transactions   53(5) 773-785   Oct 2012   [Refereed]
This article reviews the interactions between hydrogen and lattice defects produced by high-pressure torsion (HPT) process in ferritic iron and austenitic steels, and it shows the direction of development of hydrogen-resistant high-strength steels...
Yoji Mine, Akihiro Orita, Kenichi Murakami, Jean Marc Olive
Materials Science and Engineering A   548 118-125   Jun 2012   [Refereed]
Hydrogen effects on fatigue of type 304 and 316L austenitic stainless steels were studied using superficially and entirely hydrogenated specimens, which had a gradation and uniformity of the hydrogen concentration, respectively. Two contradictory ...
Yoji Mine, Kazuki Takashima
Materials Science and Engineering A   534 260-267   Feb 2012   [Refereed]
Crystallographic fatigue crack growth has been studied using iron-silicon single crystals having a notch plane of (1. 1. 0) or (1. 1. 2). In crystals containing a notch direction within an angle of ~35° to [0. 0. 1] on a notch plane of (1. 1. 0), ...
Yoji Mine, Kazuki Takashima, Paul Bowen
Materials Science and Engineering A   532 13-20   Jan 2012   [Refereed]
The fatigue crack growth resistance of a Ti-48Al-2Mn-2Nb (at.%) alloy with different lamellar spacings was investigated at room temperature in laboratory air. The crack growth resistance in the air-cooled specimen with a lamellar spacing of ~0.9μm...
Yoji Mine, Koichi Hirashita, Mitsuhiro Matsuda, Kazuki Takashima
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science   42(12) 3567-3571   Dec 2011   [Refereed]
Deformation-induced martensite in type 304 stainless steel during micro-tension testing was characterized. The stress-strain behavior of uncharged and hydrogencharged specimens revealed that hydrogen hastened the onset of hardening but decreased t...
Yoji Mine, Kazutaka Tachibana, Zenji Horita
Materials Science and Engineering A   528(28) 8100-8105   Oct 2011   [Refereed]
This study was conducted to clarify the effects of grain boundaries and precipitates on room-temperature hydrogen transport in two types of austenitic stainless steels with ultrafine-grained structures produced by high-pressure torsion (HPT) and s...
Yoji Mine, Jean Marc Olive, Jean Marc Olive, Koichi Nagata, Koichi Nagata, Tetsuro Mitsutani, Tetsuro Mitsutani
Materials Science and Engineering A   528(28) 8090-8099   Oct 2011   [Refereed]
The effects of hydrogen with a concentration of ∼0.1. mass. ppm on cyclic plasticity and crack growth were investigated on a Fe-0.01. mass% C alloy. In polycrystalline specimens, the grains covered with multiple gliding were decreased but those in...
Yoji Mine, Hidetoshi Fujisaki, Mitsuhiro Matsuda, Masao Takeyama, Kazuki Takashima
Scripta Materialia   65(8) 707-710   Oct 2011   [Refereed]
Microtension testing was conducted upon TiAl polysynthetically twinned crystals containing single domains with 0°- and 90°-oriented lamellae. The orientation-dependent deformability of the Ti3Al phase plays an important role in the microtension de...
Yoji Mine, Shunsaku Matsumoto, Shunsaku Matsumoto, Zenji Horita
Corrosion Science   53(9) 2969-2977   Sep 2011   [Refereed]
This study was conducted to elucidate the effects of annealing and hydrogenation on the tensile properties of an Fe-0.01. mass% C alloy processed by high-pressure torsion (HPT). By HPT processing, the tensile strength was increased to ∼1500. MPa t...
Yoji Mine, Shinji Ando, Kazuki Takashima
Materials Science and Engineering A   528(26-26) 7570-7578   Sep 2011   [Refereed]
The crystallographic dependence of fatigue crack growth in titanium single crystals is characterized by striation formation, herringbone-pattern formation and twin-related basal plane separation. In crystals that are oriented favourably to prismat...
Yoji Mine, Takashi Kimoto
Corrosion Science   53(8) 2619-2629   Aug 2011   [Refereed]
Hydrogen solubility and diffusivity of Fe-Cr-Ni austenitic stainless steels were measured through exposure to gaseous hydrogen at a pressure of 10. MPa over the temperature range 110-235 °C. The hydrogen solubility depended on the alloy compositio...
Yoji Mine, Kazutaka Tachibana, Zenji Horita
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science   42A(12) 1619-1629   Jun 2011   [Refereed]
This study addresses a hydrogen effect on the tensile properties of a type 310S austenitic stainless steel with ultrafine-grained structures produced by high-pressure torsion (HPT) and subsequent annealing. The mean grain size was reduced to ~85 n...
Yoji Mine, Koichi Hirashita, Mitsuhiro Matsuda, Masaaki Otsu, Kazuki Takashima
Corrosion Science   53(2) 529-533   Feb 2011   [Refereed]
This study was conducted by micro mechanical testing and scanning white-light interferometry (SWLI) to clarify the intrinsic effect of hydrogen on tensile properties of a metastable austenitic stainless steel. The stress-strain behaviour of the mi...
Yoji Mine, Yoji Mine, Kazutaka Tachibana, Zenji Horita
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science   41A(12) 3110-3210   Dec 2010   [Refereed]
The effect of high-pressure torsion (HPT) and annealing on hydrogen embrittlement (HE) of a type 304 stainless steel was studied by metallographic characterization and tensile test after hydrogen gas charging. A volume fraction of ∼78 pct of the a...
Yukitaka Murakami, Toshihiko Kanezaki, Yoji Mine
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science   41A(10) 2548-2562   Oct 2010   [Refereed]
The well-known term "hydrogen embrittlement" (HE) expresses undesirable effects due to hydrogen such as loss of ductility, decreased fracture toughness, and degradation of fatigue properties of metals. However, this article shows, surprisingly, th...
Yoji Mine, Yoji Mine, Takayuki Tsumagari, Zenji Horita
Scripta Materialia   63(9) 552-555   Sep 2010   [Refereed]
Hydrogen trapping in Fe-0.01 mass% C with ultrafine-grained structures produced by high-pressure torsion (HPT) was investigated by thermal desorption spectrometry. Hydrogen trapping in body-centred cubic iron was significantly increased by HPT pro...
Kaveh Edalati, Zenji Horita, Yoji Mine, Yoji Mine
Materials Science and Engineering A   527(7-8) 2136-2141   Mar 2010   [Refereed]
Pure Hf (99.99%) is processed by high-pressure torsion (HPT) under pressures of 4 and 30 GPa to form an ultrafine-grained structure with a gain size of ∼180 nm. X-ray diffraction analysis shows that, unlike Ti and Zr, no ω phase formation is detec...
Yoji Mine, Yoji Mine, Zenji Horita, Yukitaka Murakami, Yukitaka Murakami
Acta Materialia   58(2) 649-657   Jan 2010   [Refereed]
The effect of high-pressure torsion (HPT) on hydrogen trapping in Fe-0.01 mass% C and type 310S stainless steel was studied by metallographic characterization and hydrogen measurement after hydrogen gas charging. Hardening of both materials after ...
Shinji Fujita, Yoji Mine, Saburo Matsuoka, Yukitaka Murakami
Journal of the Society of Materials Science Japan   58(12) 1009-1016   Dec 2009   [Refereed]
Slip band-like microstructural change formed under the cyclic shear stress coupled with hydrogen has a crucial importance to clarify the basic mechanism in the presence of hydrogen of Mode II fatigue failure. The authors' previous research works h...
T. Kanezaki, Y. Mine, S. Matsuoka, Y. Murakami
Proceedings of the 2008 International Hydrogen Conference - Effects of Hydrogen on Materials   131-138   Dec 2009   [Refereed]
Yoji Mine, Yoji Mine, Zenji Horita, Yukitaka Murakami, Yukitaka Murakami
Acta Materialia   57(10) 2993-3002   Jun 2009   [Refereed]
The martensitic transformation induced by high-pressure torsion (HPT) and hydrogen desorption in Type 304 and 316L austenitic stainless steels is reported in this paper. When Type 304 with only 2.2 mass ppm hydrogen was subjected to HPT, up to 95%...
Y. Mine, Y. Mine, C. Narazaki, K. Murakami, S. Matsuoka, S. Matsuoka, Y. Murakami, Y. Murakami
International Journal of Hydrogen Energy   34(2) 1097-1107   Jan 2009   [Refereed]
Hydrogen solubility and diffusion in Type 304, 316L and 310S austenitic stainless steels exposed to high-pressure hydrogen gas has been investigated. The effects of absorbed hydrogen and strain-induced martensite on fatigue crack growth behaviour ...
Yukitaka Murakami, Toshihiko Kanezaki, Yoji Mine, Saburo Matsuoka
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science   39 A(6) 1327-1339   Jun 2008   [Refereed]
The basic mechanism of the hydrogen embrittlement (HE) of stainless steels under fatigue loading is revealed as microscopic ductile fracture, resulting from hydrogen concentration at crack tips leading to hydrogen-enhanced slip. Fatigue crack grow...
T. Kanezaki, C. Narazaki, Y. Mine, Y. Mine, S. Matsuoka, S. Matsuoka, Y. Murakami, Y. Murakami
International Journal of Hydrogen Energy   33 2604-2619   May 2008   [Refereed]
The effect of hydrogen on fatigue crack growth behavior of three stainless steels has been investigated from the viewpoint of microscopic fatigue mechanisms, martensitic transformation and hydrogen content. Fatigue crack growth rates in the hydrog...
Yoji Mine, Kaori Doi, Saburo Matsuoka, Yukitaka Murakami
Zairyo/Journal of the Society of Materials Science, Japan   57 255-261   Mar 2008   [Refereed]
The influences of hydrogen on nano-indentation of stainless steels JIS-SUS304 and JIS-SUS316L with electro-chemically-polished surfaces before and after hydrogen exposure were investigated. The "pop-in" behavior, which was presumed to correspond t...
Yoji Mine, Chihiro Narazaki, Toshihiko Kanezaki, Saburo Matsuoka, Yukitaka Murakami
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan   93(3) 247-256   Mar 2007   [Refereed]
Hydrogen penetration properties into stainless steels with and without pre-strain exposed to high-pressure hydrogen environments and effects of hydrogen and martensite on fatigue crack growth behavior of SUS304, SUS316L and SUS310S were investigat...
H. Uyama, H. Uyama, M. Nakashima, K. Morishige, Y. Mine, Y. Murakami
Fatigue and Fracture of Engineering Materials and Structures   29 1066-1074   Dec 2006   [Refereed]
The effects of hydrogen charge on cyclic stress-strain properties, slip band morphology and crack behaviour of annealed medium carbon steels (JIS-S45C) were studied. The total strain range of the stress-strain hysteresis loop in the hydrogen-charg...
Toshihiko Kanezaki, Chihiro Narazaki, Yoji Mine, Saburo Matsuoka, Yukitaka Murakami
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A   72 1717-1724   Nov 2006   [Refereed]
The effect of hydrogen on fatigue crack growth behavior of four stainless steels has been investigated from the viewpoint of martensitic transformation. The crack growth rates in hydrogen-charged SUS304 and SUS316 were accelerated. The crack growt...
Hideyuki Uyama, Yoji Mine, Yukitaka Murakami
Zairyo/Journal of the Society of Materials Science, Japan   55 726-731   Aug 2006   [Refereed]
Effects of hydrogen charge and frequency on fatigue behaviour were studied in bearing steel (JIS-SUJ2) tempered at 823K. The crack growth rate of the hydrogen-charged specimen was faster than that of the uncharged specimen. The morphology of the c...
Toshihiko Kanezaki, Yoji Mine, Yoshihiro Fukushima, Yukitaka Murakami
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A   72 653-660   May 2006   [Refereed]
The effect of hydrogen on fatigue crack growth behavior and ductility loss after fatigue cycles of austenitic stainless steels, SUS 304 and SUS 316, was investigated. In the hydrogen-charged specimens, the crack growth rates were approximately twi...
Yoji Mine, Saburo Matsuoka, Yukitaka Murakami Chihiro Narazaki, Toshihiko Kanezaki
Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture   907-908   Jan 2006   [Refereed]
Hideyuki Uyama, Yoji Mine, Yukitaka Murakami, Masaru Nakashima, Kazunori Morishige
Zairyo/Journal of the Society of Materials Science, Japan   54 1225-1230   Dec 2005   [Refereed]
Effects of hydrogen charge on fatigue behaviour of two carbon steels, JIS-S10C (SAE1010) and JIS-S45C (SAE1045) were investigated. There was no hydrogen effect in the cyclic stress-strain hysteresis loops of S10C hydrogen-charged with 0.2 ppm. On ...
S. Ando, Y. Mine, K. Takashima, K. Takashima, S. Itoh, H. Tonda
Journal of Materials Processing Technology   85 142-147   Jan 1999   [Refereed]
The explosive compaction technique has been applied to consolidate Nd-Fe-B amorphous powder, and the micro structure and magnetic properties of the compacts have been investigated. Explosive compaction was performed using an improved direct method...
Y. Mine, T. Yamada, S. Ando, K. Takashima, H. Tonda, Y. Higo, P. Bowen
Key Engineering Materials   149 721-726   Dec 1998   [Refereed]
The fatigue crack growth behaviour of α-titanium single crystals has been investigated at room temperature in laboratory air. Four types of CT specimens with different notch orientations A, B, C and D were prepared by a strain-annealing technique....
Yoji Mine, Yoji Mine, Taro Moriya, Taro Moriya, Shinji Ando, Kazuki Takashima, Kazuki Takashima, Hideki Tonda
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals   62 150-158   Dec 1998   [Refereed]
The fatigue crack growth behavior of Fe-3 mass%Si single crystals has been investigated in the laboratory air at room temperature. Three types of SEN specimens A, B and C with different notch orientations were prepared. The notch plane and directi...
Yoji Mine, Shinji Ando, Hideki Tonda, Kazuki Takashima, Yakichi Higo
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals   62 708-717   Aug 1998   [Refereed]
The fatigue crack growth behavior of α-titanium single crystals has been investigated in laboratory air at room temperature. Six types of CT specimens A, B, C, D, E and F with different notch orientations were prepared. The notch plane and directi...
Yoji Mine, Yusuke Morofuji, Shinji Ando, Kazuki Takashima, Hideki Tonda
材料   46 1167-1172   Dec 1997   [Refereed]
Fatigue crack growth behavior of a Ti-48Al-2Mn-2Nb (at%) alloy with lamellar microstructure has been investigated at room temperature in laboratory air. Single-edge-notched (SEN) specimens with different lamellar colony size and lamellar thickness...
You Mine, Shinji Ando, Kazuki Takashima, Hideki Tonda, Yakichi Higo
Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals   61 41-48   Dec 1997   [Refereed]
The fatigue crack growth behavior of α-titanium single crystals has been investigated in laboratory air at room temperature. SEN specimens A, B and C with different notch orientations were prepared by a strain-annealing technique. The notch plane ...

Conference Activities & Talks

 
峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   6 Mar 2019   
大野直人, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   6 Mar 2019   
池部由樹子, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2019   
松下彩, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2019   
眞山剛, 峯洋二, 高木康介, 高島和希
軽金属学会大会講演概要   10 Oct 2018   
高木康介, 眞山剛, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   5 Sep 2018   
池部由樹子, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   5 Sep 2018   
植木翔平, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2018   
松崎悠弥, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2018   
高木康介, 峯洋二, 高島和希
軽金属学会大会講演概要   26 Apr 2018   
峯洋二, 松村卓哉, 森戸茂一, 高島和希
日本金属学会講演概要(CD-ROM)   5 Mar 2018   
松永遼太, 峯洋二, 高島和希, 大石勝彦, 上野友典
日本金属学会講演概要(CD-ROM)   5 Mar 2018   
高木康介, 眞山剛, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2018   
植木翔平, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2018   
松崎悠弥, 眞山剛, 峯洋二
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2018   
Hydrogen embrittlement of type 304 austenitic stainless steel and effect of ultrafine grain refinement [Invited]
Y. Mine, Z. Horita, K. Takashima
The 15th International Conference on Advanced Materials   1 Sep 2017   
峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
郭光植, 峯洋二, 高島和希, DING Rengen, BOWEN Paul
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
岸大地, 眞山剛, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
松崎悠弥, 郭光植, 眞山剛, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
松村卓哉, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
植木翔平, 古賀薫, 眞山剛, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   23 Aug 2017   
Effect of hydrogen on twin boundary cracking in type 304 stainless steel
S. Ueki, Y. Mine, K. Takashima
FiMPART2017   10 Jul 2017   
Crystallographic orientation dependence of fatigue crack growth in lath martensite of carbon steel [Invited]
Y. Mine, T. Matsumura, K. Takashima
FiMPART2017   10 Jul 2017   
Microtensile behaviour of lath martensite structures in medium carbon steels [Invited]
Y. Mine, K. Kwak, T. Mayama, K. Takashima
FiMPART2017   10 Jul 2017   
古賀裕也, 郭光植, 峯洋二, 高島和希, 森戸茂一
材料とプロセス(CD-ROM)   31 Mar 2017   
安藤悠馬, 川島賢士, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   31 Mar 2017   
郭光植, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   1 Mar 2017   
細川伸也, 木村耕治, STELLHORN Jens R., 吉田亨次, 萩原幸司, 伊津野仁史, 山崎倫昭, 山崎倫昭, 河村能人, 河村能人, 峯洋二, 高島和希, 内山裕士, 筒井智嗣
日本金属学会講演概要(CD-ROM)   1 Mar 2017   
植木翔平, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   1 Mar 2017   
松村卓哉, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   1 Mar 2017   
古賀裕也, 郭光植, 峯洋二, 森戸茂一, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2017   
高木康介, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2017   
岸大地, 眞山剛, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2017   
植木翔平, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2017   
松村卓哉, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2017   
Mechanical characterization of LPSO phase of Mg85Zn6Y9 alloy using micro-shear testing
K. Kyuma, Y. Mine, K. Takashima
The 3rd International Symposium on LPSO   5 Dec 2016   
Effect of kink boundary on tensile deformation behaviour of LPSO phase in Mg85Zn6Y9 alloy
K. Takagi, Y. Mine, K. Takashima
The 3rd International Symposium on LPSO   5 Dec 2016   
渡辺大海, 松本翼, 山崎倫昭, 萩原幸司, 峯洋二, 高島和希, 河村能人
軽金属学会大会講演概要   5 Oct 2016   
Crystallographic study of hydrogen-induced fatigue crack growth in type 304 austenitic stainless steel
Y. Mine, S. Ueki, K. Takashima
Materials Science and Engineering Congress 2016 (MSE2016)   29 Sep 2016   
Crystallographic fatigue crack growth behaviour in lath martensite structures of carbon steel
T. Matsumura, Y. Mine, K. Takashima
Materials Science and Engineering Congress 2016 (MSE2016)   28 Sep 2016   
Relationship between fatigue crack growth and twin boundaries in alloy 718
M. Yamaguchi, Y. Mine, K. Takashima, C. Aoki, T. Ueno
Materials Science and Engineering Congress 2016 (MSE2016)   28 Sep 2016   
Effect of hydrogen on twinning-mediated crack growth in pure titanium single crystals under cyclic loading
K. Takagi, Y. Mine, K. Takashima, H. Li, P. Bowen
Materials Science and Engineering Congress 2016 (MSE2016)   28 Sep 2016   
渡辺大海, 山崎倫昭, 萩原幸司, 峯洋二, 高島和希, 河村能人
日本金属学会講演概要(CD-ROM)   7 Sep 2016   
山口誠人, 峯洋二, 高島和希, 青木宙也, 上野友典
日本金属学会講演概要(CD-ROM)   7 Sep 2016   
高木康介, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   7 Sep 2016   
堀田伸明, 峯洋二, 高島和希, 堀田善治
材料とプロセス(CD-ROM)   1 Sep 2016   
Micro-mechanical characterisation of hydrogen embrittlement related to twin boundary in type 304 stainless steel
S. Ueki, K. Koga, Y. Mine, K. Takashima
THERMEC' 2016   1 Jun 2016   
Crystal plasticity finite element analysis of micro-tensile behaviour of dual-phase steel subjected to pre-straining
S. Ogata, T. Mayama, Y. Mine, K. Takashima
THERMEC' 2016   1 Jun 2016   
Microtensile testing of single block structures of lath martensite steel
K. Kwak, T. Mayama, Y. Mine, K. Takashima
THERMEC' 2016   May 2016   
Characterization of hydrogen embrittlement of metastable austenitic stainless steel using micro-tensile testing [Invited]
Y. Mine, O. Kraft, K. Takashima
THERMEC2016   May 2016   
Anisotropic plasticity and crystallographic fatigue crack growth in lath martensite structures of carbon steel [Invited]
Y. Mine, T. Matsumura, S. Ueki, K. Takashima
THERMEC2016   May 2016   
渡辺大海, 山崎倫昭, 萩原幸司, 峯洋二, 高島和希, 河村能人
軽金属学会大会講演概要   28 Apr 2016   
久間康平, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   9 Mar 2016   
植木翔平, 古賀薫, 古賀薫, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2016   
峯洋二, 高島和希, 堀田伸明, 堀田善治
材料とプロセス(CD-ROM)   1 Mar 2016   
松村卓哉, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2016   
城圭二郎, 徳田誠, MA Weijian, ISRAM Khandaker, 峯洋二, 速水真也, 真下茂
高圧討論会講演要旨集   27 Oct 2015   
岸大地, 松田光弘, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   2 Sep 2015   
堀田伸明, 峯洋二, 高島和希, 堀田善治
日本金属学会講演概要(CD-ROM)   2 Sep 2015   
緒方新也, 眞山剛, 峯洋二, 高島和希, 首藤洋志, 横井龍雄
日本金属学会講演概要(CD-ROM)   2 Sep 2015   
堀田伸明, 峯洋二, 高島和希, 堀田善治
材料とプロセス(CD-ROM)   1 Mar 2015   
KWAK Kwangsik, 眞山剛, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2015   
川島賢士, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2015   
高木康介, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2015   
高島和希, 峯洋二
日本学術会議材料工学連合講演会講演論文集   27 Oct 2014   
古賀薫, 中道翔生, 峯洋二, 高島和希, 堀田善治
日本金属学会講演概要(CD-ROM)   10 Sep 2014   
原口大佑, 峯洋二, 堀田善治
日本金属学会講演概要(CD-ROM)   10 Sep 2014   
峯洋二, 緒方新也, 小原直也, 高島和希, 大村孝仁, 首藤洋志, 横井龍雄
材料とプロセス(CD-ROM)   1 Sep 2014   
黒田晃斗, 峯洋二, 高島和希, 堀田善治
材料とプロセス(CD-ROM)   1 Sep 2014   
KWAK Kwangsik, 高島大樹, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2014   
山室賢輝, 高島大樹, 峯洋二, 高島和希
九州地区総合技術研究会講演・技術報告集   19 Mar 2014   
峯洋二, 井手口貴弘, 高島和希, 堀田善治, OLIVE Jean‐Marc
日本金属学会講演概要(CD-ROM)   7 Mar 2014   
原口大佑, 峯洋二, 堀田善治
日本金属学会講演概要(CD-ROM)   7 Mar 2014   
前薗亨, 峯洋二, 山崎倫昭, 河村能人, 高島和希
日本金属学会講演概要(CD-ROM)   7 Mar 2014   
前薗亨, 峯洋二, 山崎倫昭, 河村能人, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014   
黒田晃斗, 峯洋二, 高島和希, 堀田善治
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014   
高島和希, 峯洋二
日本機械学会年次大会講演論文集(CD-ROM)   7 Sep 2013   
古賀薫, 峯洋二, 高島和希, 堀田善治
日本金属学会講演概要(CD-ROM)   3 Sep 2013   
坂本幸成, 峯洋二, 山崎倫昭, 河村能人, 高島和希
日本金属学会講演概要(CD-ROM)   3 Sep 2013   
小原直也, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   3 Sep 2013   
峯洋二, 古賀薫, 高島和希, 堀田善治
日本金属学会講演概要(CD-ROM)   3 Sep 2013   
古賀薫, 峯洋二, 高島和希, 堀田善治
材料とプロセス(CD-ROM)   1 Sep 2013   
小原直也, 松田光弘, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2013   
高島和希, 福富健人, 小田浩明, 峯洋二, 山崎倫昭, 河村能人
日本金属学会講演概要(CD-ROM)   13 Mar 2013   
坂本幸成, 福富健人, 峯洋二, 山崎倫昭, 河村能人, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2013   
高島大樹, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2013   
原口大佑, 峯洋二, 高島和希, 堀田善治
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2013   
高島大樹, 平下皓一, 松田光弘, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   3 Sep 2012   
西田昌平, 松田光弘, 峯洋二, 高島和希, 大津雅亮, 島田祐介, 萱森陽一
日本金属学会講演概要(CD-ROM)   3 Sep 2012   
峯洋二
日本金属学会講演概要(CD-ROM)   3 Sep 2012   
藤崎秀俊, 松田光弘, 高島和希, 峯洋二, 竹山雅夫
日本金属学会講演概要(CD-ROM)   15 Mar 2012   
峯洋二, 木本貴志, 木本貴志
日本金属学会講演概要(CD-ROM)   15 Mar 2012   
高島大樹, 平下皓一, 平下皓一, 松田光弘, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2012   
坂本幸成, 竹山雅夫, 松田光弘, 峯洋二, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2012   
峯洋二, 藤崎秀俊, 松田光弘, 竹山雅夫, 高島和希
日本金属学会講演概要(CD-ROM)   20 Oct 2011   
藤崎秀俊, 松田光弘, 大津雅亮, 高島和希, 峯洋二, 竹山雅夫
日本金属学会講演概要   20 Apr 2011   
峯洋二, 橘和孝, 堀田善治
日本金属学会講演概要   20 Apr 2011   
峯洋二, 平下皓一, 松田光弘, 大津雅亮, 高島和希
日本金属学会講演概要   20 Apr 2011   
藤崎秀俊, 松田光弘, 峯洋二, 大津雅亮, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2011