Hyung-Won PARK

Profile Information

Affiliation: Associate Professor, Faculty of Production Systems Engineering and Sciences, KOMATSU UNIVERSITY

Degree: Ph.D.(The University of Tokyo)

ORCID ID: https://orcid.org/0000-0003-3344-7813
J-GLOBAL ID: 201801014509363667
researchmap Member ID: B000293863

Research Interests

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Manufacturing and production engineering /
Nanotechnology/Materials / Material fabrication and microstructure control /
Nanotechnology/Materials / Structural and functional materials /

Research History

Sep, 2021 - Present

Research Fellow, School of Engineering, The University of Tokyo
Apr, 2021 - Present

Associate Professor, Faculty of Production Systems Engineering and Sciences, KOMATSU UNIVERSITY
Jul, 2018 - Jul, 2021

Cooperative Research Fellow, School of Engineering, The University of Tokyo
Apr, 2018 - Mar, 2021

Assistant Professor, Faculty of Production Systems Engineering and Sciences, Komatsu University
Oct, 2017 - Mar, 2018

Project Researcher, Institute of Industrial Science, The University of Tokyo
Oct, 2015 - Oct, 2017

Senior Research Engineer, Materials and Production engineering Research Institute, LG Electronics
Apr, 2015 - Sep, 2015

Project Researcher, Institute of Industrial Science, The University of Tokyo
Apr, 2013 - Mar, 2015

JSPS Research Fellow [(DC2 (201304-201409)・PD (201410-201503)], Institute of Industrial Science, The University of Tokyo
May, 2011 - Sep, 2011

Technical Assistant, Institute of Industrial Science, The University of Tokyo
Apr, 2011 - Sep, 2011

Research Student, Institute of Industrial Science, The University of Tokyo
Jan, 2011 - Feb, 2011

Visiting Scholar, Structural Metals Center, National Institute for Materials Science
Dec, 2009 - Jan, 2010

Visiting Scholar, Division of Materials and Manufacturing Science, Osaka University
Mar, 2008 - Jun, 2008

Intern, Quality Control Division, Central Motek Corporation
Jan, 2002 - Mar, 2004

Republic of Korea ARMY

Education

Oct, 2011 - Sep, 2014

Department of Mechanical Engineering, School of Engineering, The University of Tokyo
Mar, 2009 - Feb, 2011

Department of Metallurgical and Materials Engineering, Division of Materials Science and Engineering, Gyeongsang National University
Mar, 2001 - Feb, 2009

Department of Metallurgical and Materials Engineering, School of Materials Science and Engineering, Gyeongsang National University

Committee Memberships

Mar, 2024 - Present

創形創質工学部会若手フォーラム幹事, 日本鉄鋼協会
Jul, 2023 - Present

国際交流委員, 日本塑性加工学会
Apr, 2023 - Present

創形創質工学部会委員, 日本鉄鋼協会
Apr, 2023 - Present

圧延工学分科会運営委員, 日本塑性加工学会
Apr, 2023 - Present

出版事業委員, 日本塑性加工学会
Jul, 2019 - Present

北陸支部北新部会若手実行委員, 日本塑性加工学会
Jan, 2023 - Jan, 2024

第74回連合講演会実行委員, 日本塑性加工学会

Awards

Mar, 2023

日本鉄鋼協会澤村論文賞（2023年表彰）, Flow Stress of Duplex Stainless Steel by Inverse Analysis with Dynamic Recovery and Recrystallization Model

Kyunghyun Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, Jun Yanagimoto
Jan, 2019

Best Presentation Award, Acquisition and constitutive equation for flow behavior of Inconel 718 alloy under hot forming in a region of r'' precipitation, The Japan Society for Technology of Plasticity

Papers

Formation mechanism of ultrafine grains at machined surface of 0.45 % carbon steel under high-speed turning process

Hyung-Won Park, Masaki Matsuda, Kanji Ishitaka, Shinichi Funase, Atsushi Tomizawa, Akira Hosokawa, Jun Yanagimoto, Takashi Ueda

Journal of Manufacturing Processes, 113 171-182, Mar, 2024 Peer-reviewedLead authorCorresponding author
Constitutive Description of Flow Curve for Duplex Titanium Alloy for Hot Forming under Elevated Temperature

Yuki Shimomura, Hyung-Won Park, Hyeon-Woo Park, Yuji Sato, Jun Yanagimoto

ISIJ International, (Advance online publication), Feb, 2024 Peer-reviewed
Flow Stress of Duplex Stainless Steel by Inverse Analysis with Dynamic Recovery and Recrystallization Model

Kyunghyun Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, Jun Yanagimoto

Tetsu-to-Hagane, 109(11) 915-926, Nov 1, 2023 Peer-reviewedInvited
Formation of ultrafine grain and mechanical properties in commercial pure titanium subjected to heavy-reduction thermomechanical processing around β transus temperature

Hyung-Won Park, Kyunghyun Kim, Hyeon-Woo Park, Yuki Shimomura, Taichi Kitajima, Jun Yanagimoto

Materials Science and Engineering: A, 873 145032-145032, May, 2023 Peer-reviewedLead authorCorresponding author
Flow Curve of Superalloy 718 under Hot Forming in a Region of γ” Precipitation

Hyung-Won Park, Kyunghyun Kim, Hyeon-Woo Park, Akira Yanagida, Jun Yanagimoto

ISIJ International, 63(2) 354-365, Feb 15, 2023 Peer-reviewedLead authorCorresponding author
Quantification of Dynamic Softening Kinetics of Duplex Stainless Steel Using Constituent Flow Stresses With Inverse Analysis

Kyunghyun Kim, Hyung-Won Park, Hyeon-Woo Park, Jun Yanagimoto

Metallurgical and Materials Transactions A, 54(2) 423-438, Feb, 2023 Peer-reviewed
Formulation of a Generalized Flow Curve for 0.2% Carbon Steel under High-speed Hot Forming Conditions by a Regression Method

Hyeon-Woo PARK, Kyunghyun KIM, Hyung-Won PARK, Sheng DING, Jun YANAGIMOTO

Tetsu-to-Hagane, 108(4) 249-259, Apr, 2022 Peer-reviewedInvited
Constitutive Equation for Flow Stress in Superalloy 718 by Inverse Analysis under Hot Forming in a Region of Precipitation

Hyung-Won Park, Sosei Kakiuchi, Kyunghyun Kim, Akira Yanagida, Jun Yanagimoto

Crystals, 11(7) 811, Jul, 2021 Peer-reviewedInvitedLead authorCorresponding author
Flow Stress of Duplex Stainless Steel by Inverse Analysis with Recovery and Recrystallization Model

Kyunghyun Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, Jun Yanagimoto

ISIJ International, 61(1) 280-291, Jan, 2021 Peer-reviewed
Formulation of a Generalized Flow Curve for 0.2% Carbon Steel under High-speed Hot Forming Conditions by a Regression Method

Hyeon-Woo PARK, Kyunghyun KIM, Hyung-Won PARK, Sheng DING, Jun YANAGIMOTO

ISIJ International, 60(12) 2896-2904, Dec, 2020 Peer-reviewed
Flow stress measurement and dynamic response analysis of hot compression test machine at high strain rates

Hyeon-Woo Park, Kyunghyun Kim, Hyung-Won Park, Jun Yanagimoto

ISIJ International, 60(3) 573-581, Mar, 2020 Peer-reviewed
Formability of Bimodal Steel Strips subjected to Heavy-reduction Controlled-rolling Process

Hyung-Won PARK, Kei SHIMOJIMA, Sumio SUGIYAMA, Jun YANAGIMOTO

Tetsu-to-Hagane, 105(2) 190-196, Feb, 2019 Peer-reviewedInvitedLead author
Production of bimodal steel strip by heavy-reduction rolling

H.W. PARK, J. YANAGIMOTO

The Japan Society for Technology of Plasticity, 58 17-21, 2017 InvitedLead author
Mechanical Properties and Anisotropies of 0.2% Carbon Steel with Bimodal Microstructure Subjected to Heavy-Reduction Controlled-Rolling Process

Hyung-Won Park, Kei Shimojima, Sumio Sugiyama, Hisanao Komine, Jun Yanagimoto

STEEL RESEARCH INTERNATIONAL, 87(7) 947-956, Jul, 2016 Peer-reviewedLead author
Microstructural evolution and formation mechanism of bimodal structure of 0.2% carbon steel subjected to the heavy-reduction controlled rolling process

Hyung-Won Park, Kei Shimojima, Sumio Sugiyama, Hisanao Komine, Jun Yanagimoto

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 624 203-212, Jan, 2015 Peer-reviewed
Effect of carbon content on formation of bimodal microstructure and mechanical properties of low-carbon steels subjected to heavy-reduction single-pass hot/warm deformation

Hyung-Won Park, Jun Yanagimoto

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 607 542-550, Jun, 2014 Peer-reviewed
Formation process and mechanical properties of 0.2% carbon steel with bimodal microstructures subjected to heavy-reduction single-pass hot/warm compression

Hyung-Won Park, Jun Yanagimoto

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 567 29-37, Apr, 2013 Peer-reviewed
Nanoindentation/atomic force microscopy analyses of epsilon-martensitic transformation and shape memory effect in Fe-28Mn-6Si-5Cr alloy

K. Sekido, T. Ohmura, T. Sawaguchi, M. Koyama, H. W. Park, K. Tsuzaki

SCRIPTA MATERIALIA, 65(11) 942-945, Dec, 2011 Peer-reviewed
The effect of Ca addition on the grain growth inhibition during reheating process of Al-Zn-Mg Al alloys for thixo-extrusion

H.W. PARK, D.H. KIM, S.Y. SHIM, H.K. KIM, B.H. SEONG, C.O. CHOI, S.G. LIM

J. Kor. Foundrymen’s Soc., 31 347-353, 2011 Peer-reviewed
THE OPTIMIZING CONDITIONS BY TAGUCHI METHOD FOR FABRICATING SEMI-SOLID Al-Zn-Mg ALLOY SLURRY BY COOLING PLATE METHOD

Sung-Yong Shim, Hyung-Won Park, In-Sang Jeong, Su-Gun Lim

SURFACE REVIEW AND LETTERS, 17(2) 185-188, Apr, 2010 Peer-reviewed

Misc.

１パス大ひずみ加工熱処理プロセスによる高強度超微細粒純チタンの創製基礎原理の解明

Hyung-Won PARK

天田財団助成研究成果報告書, 2022 Lead author
Seeing is Believing -Find Motivation-

Hyung-Won PARK

Bulletin of the JSTP, 3(27) 169-170, Mar, 2020 InvitedLead author
Formation and mechanical properties of bimodal microstructures in 0.2% carbon steel by heavy-reduction hot/warm compression

Hyung-Won Park, Jun Yanagimoto

11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 81 462-467, 2014 Peer-reviewed
Formation and Mechanical Properties of Bimodal Microstructures in 0.2% Carbon Steel by Heavy-Reduction Hot Compression

Hyung-Won Park, Jun Yanagimoto

Proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing, 3297-3302, 2013
Fundamental investigation in manufacturing formable high-strength steel strips with bimodal microstructure by width-restricted heavy-reduction controlled rolling process

J. YANAGIMOTO, H.W. PARK

Bulletin of The Iron and Steel Institute of Japan (Ferrum), 17(12) 848-851, 2012 Invited

Presentations

Effect of tools on cutting behavior and surface microstructure in turning Ti–6Al–4V at cutting speeds of 120–310m/min

石高寛士, 舟瀬真一, 宮嶋大輝, 上田隆司, 富澤淳, 細川晃, 朴亨原

Mar 15, 2024
Ultrafine grain formation and mechanical properties in commercial pure titanium through thermomechanical processing near β transus temperature

Hyung-Won Park, Kyunghyun Kim, Hyeon-Woo Park, Yuki Shimomura, Taichi Kitajima, Jun Yanagimoto

2024 TMS Annual Meeting & Exhibition, Mar 6, 2024
Effect of strain rate on formation of ultrafine grains and α↔β strain-induced transformation under thermomechanical treatment of pure titanium

朴亨原, 朴賢祐, 下村勇貴, 朴明験, 柳本潤

第74回塑性加工連合講演会, Nov 17, 2023
Effect of Tools on Cutting Behavior and Surface Microstructure under High-Speed Machining of Ti–6Al–4V

石高寛士, 舟瀬真一, 上田隆司, 富澤淳, 細川晃, 朴亨原

186th CAMP-ISIJ, Sep 21, 2023
Effect of deformation temperature on flow stress and dynamical metallurgical phenomena of Al–Zn–Mg alloy under thermomechanical treatment

Hyung-Won PARK, Hyeon-Woo PARK, Yuki SHIMOMURA, Yun-Soo LEE, Tomohiro HATA, Jun YANAGIMOTO

日本金属学会2023年秋期(第173回)講演大会, Sep 20, 2023
動的冶金現象を活用した高強度アルミ合金の連続製造プロセス開発の基礎研究

朴亨原

三五ものづくり基金成果報告会, Aug 4, 2023 Invited
有限要素法を用いて高速切削によるS45Cの切削表面部に及ぼす温度・ひずみ・ひずみ速度の定量分析

朴亨原, 上田隆司, 富澤淳, 柳本潤

2023年度塑性加工春季講演会, Jun 10, 2023
Flow stress of duplex stainless steel by inverse analysis with heterogeneous dynamic softening models of austenite and ferrite

185th CAMP-ISIJ, Mar 9, 2023 Invited
The effect of reduction rate on the formation of ultrafine grains of pure titanium under thermomechanical treatment

朴亨原, 朴賢祐, 金勁賢, 柳本潤

第73回塑性加工連合講演会, Nov 18, 2022
Cutting temperature, cutting behavior and surface integrity of 0.45% carbon steel under high-speed machining

H.W. PARK, M. MATSUDA, K. ISHITAKA, S. HUNASE, A. TOMIZAWA, J. YANAGIMOTO, T. UEDA

日本金属学会2022年秋季講演大会, Sep 22, 2022
Cutting temperature, cutting behavior and surface microstructure of Ti–6Al–4V under high-speed machining

K. ISHITAKA, M. MATSUDA, S. HUNASE, T. UEDA, A. TOMIZAWA, H.W. PARK

日本金属学会2022年秋季講演大会, Sep 21, 2022
Ultra-rapid quenching to evaluate the evolution of microstructure under high-speed deformation

Hyeon-Woo Park, Hyung-Won Park, J. Yanagimoto

CAMP-ISIJ the 184th, Sep 21, 2022
V-bending test and formability of thermomechanically treated pure titanium

Hyung-Won PARK, Taichi KITAJIMA, Hyeon-Woo PARK, Kyunghyun KIM, Jun YANAGIMOTO

The Proceeding of the 2022 Japanese Spring Conference for the Technology of Plasticity, Jun 6, 2022
The flow stress of austenitic stainless steel at high strain rates

Hyeon-Woo Park, K.H. Kim, Hyung-Won Park, SJ. Yanagimoto

The Proceeding of the 72th Japanese Joint Conference for the Technology of Plasticity, Oct 29, 2021
Deformation behavior and microstructural evolution in pure titanium by hot compression test with heating temperature

Hyung-Won PARK, K. KIM, Hyeon-Woo PARK, J. YANAGIMOTO

The Proceeding of the 71th Japanese Joint Conference for the Technology of Plasticity, Nov 15, 2020
Flow curve regression of carbon steel at intermediate and high strain rate under the hot forming condition

Hyeon-Woo Park, K.H. Kim, Hyung-Won Park, J. Yanagimoto

CAMP-ISIJ the 180th, Sep 17, 2020
Activation energy using each flow stress of austenite and ferrite in duplex stainless steel

Kyunghyun Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, Jun Yanagimoto

CAMP-ISIJ the 179th, Mar 18, 2020
幅拘束大圧下制御圧延による易成形高強度バイモーダル薄鋼板の製造基盤研究

Hyung-Won PARK, Jun YANAGIMOTO

JST産学共創基礎基盤研究プログラム「ヘテロ構造制御」産学共創の場（最終回）, Oct 25, 2019
Inverse analysis of flow stress of duplex stainless steels with phase fraction effects between ferrite and austenite

K.H. Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, J. Yanagimoto

The Proceeding of the 70th Japanese Joint Conference for the Technology of Plasticity, Oct 12, 2019
Flow stress by inverse analysis with dynamic recovery and recrystallization model of duplex stainless steel

K.H. Kim, Hyung-Won Park, Sheng Ding, Hyeon-Woo Park, J. Yanagimoto

CAMP-ISIJ, Sep, 2019

Teaching Experience

Jun, 2023 - Present

修了研究 (公立小松大学大学院)
Jun, 2023 - Present

先進材料・加工学特論 (公立小松大学大学院)
Oct, 2022 - Present

Mechanical materials (KOMATSU UNIVERSITY)
Apr, 2022 - Present

機械電気工学実験I（担当：炭素鋼の熱処理と金属組織） (公立小松大学)
Apr, 2021 - Present

課題研究ゼミナール (公立小松大学)
Apr, 2021 - Present

卒業研究 (公立小松大学)
Oct, 2020 - Present

課題探求ゼミナール (公立小松大学)
Apr, 2020 - Present

機械設計製図II (公立小松大学)
Apr, 2020 - Present

機械工学実習（担当：CAD・CAM・CNC） (公立小松大学)
Apr, 2018 - Present

テーマ別基礎ゼミ (公立小松大学)
Apr, 2021 - Mar, 2022

機械電気工学実験I（副担当：炭素鋼の熱処理と顕微鏡組織） (公立小松大学)
Oct, 2020 - Mar, 2022

機械電気工学実験II（担当：3Dプリンター） (公立小松大学)
Apr, 2018 - Mar, 2022

キャリアデザインチーム論Ｉ (公立小松大学)
Apr, 2020 - Mar, 2021

機械電気工学実験I（副担当：電気回路） (公立小松大学)
Apr, 2018 - Mar, 2021

情報処理基礎 (公立小松大学)

Professional Memberships

Research Projects

Elucidation of Metallurgical Phenomena at Cutting Surface during High-Speed Turning of Ti–6Al–4V Alloy with Ceramic versus Carbide Tools

Apr, 2024 - Mar, 2025
切削速度900m/minを超える高速切削による炭素鋼のナノサイズ表面層の拡張可能性の探求

研究補助, 公益財団法人JKA, Apr, 2024 - Mar, 2025
βトランザス温度以下で加工熱処理による純チタンのα→β加工誘起動的相変態の発生メカニズムの解明

公益財団法人天田財団一般研究開発助成, Oct, 2022 - Mar, 2025
1パス大ひずみ加工熱処理による高強度超微細粒純チタンの創製とプロセスの基盤構築

科研費基盤研究(C), 日本学術振興会, Apr, 2022 - Mar, 2025
TMS 2024 Annual Meeting & Exhibition

公益財団法人天田財団国際会議等参加助成, Oct, 2023 - Mar, 2024
動的冶金現象を活用した高強度アルミ合金の連続製造プロセス開発の基礎研究

研究開発助成, 公益財団法人三五ものづくり基金, Apr, 2023 - Mar, 2024
動的冶金現象を活用した高強度アルミ合金の連続製造プロセス開発の基礎研究 -加工熱処理における7000系アルミ合金の加工温度による流動応力と動的冶金挙動-

研究開発助成, 公益財団法人三五ものづくり基金, Apr, 2022 - Mar, 2023
1パス大ひずみ加工熱処理プロセスによる高強度超微細粒純チタンの創製基礎原理の解明

奨励研究助成若手研究者, 公益財団法人天田財団, Oct, 2019 - Mar, 2022
インコネル718合⾦の析出相の定量・定性分析

試⾏的利⽤制度（A）, ⽂部科学省ナノテクノロジープラットフォーム微細構造解析プラットフォーム, Nov, 2018 - Mar, 2019
幅拘束大圧下制御圧延による易成形高強度バイモーダル薄鋼板の製造基盤研究

科研費特別研究員奨励費, 日本学術振興会, Apr, 2013 - Mar, 2015

Industrial Property Rights

特許10-2525552-0000 Frame of Mobile Terminal having Multi-layered Metal Structure

K.H. KIM, J.H. HWANG, H.W. PARK, C.S. MINN
特許 1024575290000 Aluminum Alloy

H.W. PARK, K.H. KIM, C.H. LIM, J.H. HWANG, Y.J. KIM
特開EP03594369 ALUMINUM ALLOY

H.W. PARK, K.H. KIM, C.H. LIM, J.H. HWANG, Y.J. KIM
特開US20200010935 ALUMINUM ALLOY

H.W. PARK, K.H. KIM, C.H. LIM, J.H. HWANG, Y.J. KIM
特開WO/2018/164314 Aluminum Alloy

H.W. PARK, K.H. KIM, C.H. LIM, J.H. HWANG, Y.J. KIM
特開10-2018-0070333 Ti-C-Cr-Ni Coating Composition for Insufficient Lubricant Condition and Method for Producing Alloy Coating

K.H. KIM, J.H. HWANG, H.W. PARK, C.S. MINN
特願10-2016-0125022 Mobile Terminal

K.H. KIM, J.H. HWANG, H.W. PARK, C.S. MINN

Academic Activities

第74回塑性加工連合講演会優秀論文講演奨励賞審査委員

Review, evaluation

日本塑性加工学会, Nov 17, 2023 - Nov 18, 2023
第353回塑性加工シンポジウム「金属材料のリサイクル技術の最前線」

Panel moderator, session chair, etc.

日本塑性加工学会, Nov 16, 2023
第186回秋季講演大会ポスターセッション評価委員

Review, evaluation

日本鉄鋼協会, Jul, 2023 - Sep, 2023
第72回塑性加工連合講演会優秀論文講演奨励賞審査委員

Review, evaluation

日本塑性加工学会, Oct 30, 2021
2021年度春季講演会優秀論文講演奨励賞審査委員

Review, evaluation

日本塑性加工学会, Jun 5, 2021
北陸支部第30回講演会

Panel moderator, session chair, etc.

日本塑性加工学会, Mar 5, 2021
Reviewer

Peer review

Heliyon, 2018

Social Activities

公立小松大学シーズ・ニーズマッチングシンポジウム

Host, Logistic support

Oct 17, 2023
模擬講義 (学校法人稲置学園星稜高等学校)

Lecturer

公益社団法人大学コンソーシアム石川, May 27, 2023
公立小松大学及び研究の紹介

Official expert

一般社団法人石川県鉄工機電協会, MEX金沢2023, May 18, 2023 - May 20, 2023
公立小松大学シーズ・ニーズマッチングシンポジウム運営・ポスター発表

Logistic support

冶金現象を考慮した高速切削プロセスの開発（Ti-6Al-4Vを中心として）, Dec 10, 2022
模擬講義 (石川県立輪島高等学校)

Lecturer

公益社団法人大学コンソーシアム石川, Oct 21, 2022
純チタンの熱間圧縮挙動及び金属組織の変化

Official expert

公立小松大学, ［研究展示］サイエンスヒルズこまつ, Jan, 2022 - Sep, 2022
公立小松大学シーズ・ニーズマッチングシンポジウム

Lecturer

新たな構造材料とプロセッシングへの研究 (北陸中日新聞掲載19年11月09日）, Nov 8, 2019
自動車技術の進歩と展望講座：自動車軽量化のための材料

Lecturer

こまつ市民大学, Sep 28, 2019
公立小松大学による「自由研究相談会」

Logistic support

サイエンスヒルズこまつ, Aug 17, 2019
公立小松大学シーズ・ニーズマッチングシンポジウム

Official expert

新たな構造材料とプロセッシングへの研究, Sep 29, 2018
自由研究のまとめ方などを相談しよう

Logistic support

サイエンスヒルズこまつ, Aug 21, 2018

Media Coverage

公立小松大学シーズ・ニーズマッチングシンポジウム（新たな構造材料とプロセッシングへの研究）

北陸中日新聞, Nov 9, 2019 Newspaper, magazine
ラジオこまつ

公立小松大学生産システム科学科及び研究紹介（19年8月17・24・31日放送）, Jul 5, 2019
公立小松大学開け！研究室のとびら：生産システム科学編：金属材料の高度な特性を引き出す

小松市, 広報こまつ, Jul, 2019 Promotional material

Profile Information

Research Interests

Research Areas

Research History

Education

Committee Memberships

Awards

Papers

Misc.

Presentations

Teaching Experience

Professional Memberships

Research Projects

Industrial Property Rights

Academic Activities

Social Activities

Media Coverage

Menu

Coauthors