Kiyoshi Matsumoto

J-GLOBAL         Last updated: Oct 5, 2019 at 11:20
 
Avatar
Name
Kiyoshi Matsumoto
Affiliation
Toyo University
Section
Faculty of Science and Engineering Department of Mechanical Engineering
Research funding number
10282675

Research Interests

 
 

Research Areas

 

Awards & Honors

 
Jan 2016
Measurement of jumping force of a fruit fly using a mesa structured force plate, IEEE MEMS2016 Outstanding Student Paper Award Finalist
 
2009
Nano-Mechanical Structure Fabrication Technology for Highly Integrated, Complex MEMS, Best Paper Award
Winner: Tetsuo Kan, Yusuke Takei, Hiroaki Onoe, Eiji Iwase, Tetsuji Dohi, Kiyoshi Matsumoto, Isao Shimoyama
 
2006
Mechanical Tuning of 2D Photonic Crystal with MEMS-based Electrostatic Actuator, LEOS-Newport/Spectra-Physics Annual Student Paper Awards First Place, IEEE Lasers and Electro-Optics Society
Winner: Tomoyuki Takahata, Kiyoshi Matsumoto, Isao Shimoyama
 

Published Papers

 
Kan T, Isozaki A, Kanda N, Nemoto N, Konishi K, Takahashi H, Kuwata-Gonokami M, Matsumoto K, Shimoyama I
Nature communications   6 8422   Oct 2015   [Refereed]
Isozaki A, Kan T, Takahashi H, Matsumoto K, Shimoyama I
Optics express   23(20) 26243-26251   Oct 2015   [Refereed]
Nguyen TV, Nguyen MD, Takahashi H, Matsumoto K, Shimoyama I
Lab on a chip   15(18) 3670-3676   Sep 2015   [Refereed]
竹井裕介, 青木亮, 金子智則, 松本潔, 下山勲
電気学会論文誌 E   135(6) 199-203 (J-STAGE)-203   2015
In this research, we fabricated a MEMS (Micro Electro Mechanical Systems) heart sound sensor (phonocardiogram sensor). The sensor is based on piezo-resistive silicon cantilever and it detects the skin vibration caused by heartbeat. We made a small...
野田 堅太郎, グエンビンキエム, 松本 潔
「センサ・マイクロマシンと応用システム」シンポジウム論文集 電気学会センサ・マイクロマシン部門 [編]   31 1-4   Oct 2014

Misc

 
Kaneko Tomonori, Nguyen Minh Dung, Takahata Tomoyuki, Matsumoto Kiyoshi, Shimoyama Isao
ロボティクス・メカトロニクス講演会講演概要集   2013 1A2-C09(1)"-"1A2-C09(4)"   May 2013
In this paper, we report an approach to measure mechanomyogram (MMG) using a MEMS pressure sensor. The sensor consisted of an open cavity and a micro piezo-resistive cantilever, which was placed at the cavity's opening. The sensor was attached on ...
Hirakawa Shinnosuke, Takahashi Hidetoshi, Takahata Tomoyuki, Matsumoto Kiyoshi, Shimoyama Isao
ロボティクス・メカトロニクス講演会講演概要集   2013 1A1-A12(1)"-"1A1-A12(4)"   May 2013
We measured differential pressures on the wing of an ornithopter with different stiffness of veins in flapping motion. The pressure measurement was carried out by using a MEMS differential pressure sensor attached on the wing surface. The ornithop...
菅哲朗, 磯崎瑛宏, 根本夏紀, 小西邦昭, 五神真, 松本潔, 下山勲, 神田夏輝
センサ・マイクロマシンと応用システムシンポジウム(CD-ROM)   30th ROMBUNNO.6PM3-PSS-24   2013
海法克享, 高橋英俊, 富松大, 小林健, 松本潔, 下山勲, 伊藤寿浩, 前田龍太郎
センサ・マイクロマシンと応用システムシンポジウム(CD-ROM)   30th ROMBUNNO.6PM3-PSS-38   2013
竹井裕介, 浜島朋希, 野田堅太郎, 松本潔, 下山勲
センサ・マイクロマシンと応用システムシンポジウム(CD-ROM)   30th ROMBUNNO.6PM3-PSS-64   2013
竹井裕介, 野田堅太郎, 河合利彦, 舘村卓, 外山義雄, 高井めぐみ, 松本潔, 下山勲
日本機械学会シンポジウム:スポーツ・アンド・ヒューマン・ダイナミクス(CD-ROM)   2013 ROMBUNNO.217   2013
中井亮仁, 永野顕法, 高橋英俊, 松本潔, 下山勲
日本機械学会シンポジウム:スポーツ・アンド・ヒューマン・ダイナミクス(CD-ROM)   2013 ROMBUNNO.134   2013
堀正峻, 高橋英俊, 中井亮仁, 松本潔, 下山勲
日本機械学会シンポジウム:スポーツ・アンド・ヒューマンダイナミクス講演論文集   2012 60-63   Nov 2012
竹井裕介, 野田堅太郎, 河合利彦, 舘村卓, 外山義雄, 松本潔, 下山勲
日本機械学会シンポジウム:スポーツ・アンド・ヒューマンダイナミクス講演論文集   2012 320-323   Nov 2012
Takei Yusuke, Noda Kentaro, Kawai Toshihiko, Tachimura Takashi, Toyama Yoshio, Matsumoto Kiyoshi, Shimoyama Isao
Symposium on sports and human dynamics   2012 320-323   Nov 2012
We fabricated triaxial force sensor applicable to non-invasive human lingual motion measurement. The sensor contains two cantilevers for shear force sensing and one beam for pressure sensing. These cantilevers and the beam were buried in the silic...

Books etc

 
The Principle of Machine Design
edited by Y. Hatamura, written by Institute of Creative Design (Part:Joint Work)
1999   

Conference Activities & Talks

 
高畑智之, 松本潔, 下山勲
日本ロボット学会学術講演会予稿集(CD-ROM)   3 Sep 2015   
NGUYEN Thanh‐Vinh, 高橋英俊, 松本潔, 下山勲
電気学会フィジカルセンサ研究会資料   2 Jul 2015   
竹井裕介, 鈴木智絵, 野田堅太郎, 高畑智之, 松本潔, 下山勲
電気学会バイオ・マイクロシステム研究会資料   29 May 2015   
海法克享, 高橋英俊, 富松大, 小林健, 松本潔, 下山勲, 伊藤寿浩, 前田龍太郎
精密工学会大会学術講演会講演論文集   1 Mar 2015   
菅哲朗, 磯崎瑛宏, 神田夏輝, 根本夏紀, 小西邦昭, 五神真, 松本潔, 下山勲
応用物理学会春季学術講演会講演予稿集(CD-ROM)   26 Feb 2015   

Research Grants & Projects

 
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(B))
Project Year: 2011 - 2013    Investigator(s): Kiyoshi MATSUMOTO
In this study, by using the method of depositing organic film directly on liquid surface, the research and development of micro devices with liquid as functional elements were carried out. For the establishment of the depositing technology, a meth...
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(A))
Project Year: 2010 - 2013    Investigator(s): Isao SHIMOYAMA
In this project, a triaxial MEMS force sensing cantilever was studied. The sensor is equipped with a piezoresistor for force sensing at the root of the cantilever so that a quantitative mechanical stimuli could be applied to biological cells. The ...
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(A))
Project Year: 2005 - 2008    Investigator(s): Isao SHIMOYAMA
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(C))
Project Year: 2002 - 2004    Investigator(s): Katsumi FUKUDA
This project is on a fabrication method of nano-scale optical elements using micro contact printing (uCP). Alkyl silane molecules were coated on poly(dimethylsyloxane) (PDMS) stamps with nano- to micro-patterns, and transferred the molecules onto ...
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(A))
Project Year: 2001 - 2004    Investigator(s): Isao SHIMOYAMA
In this project, we researched on the transmissive multi-view stereoscopic display. There is a trade-off between the resolution and the number of images in existing multi-view stereoscopic displays. In order to solve this problem, we propose the w...