Ming YANG

J-GLOBAL         Last updated: Mar 15, 2019 at 15:38
 
Avatar
Name
Ming YANG
E-mail
yangtmu.ac.jp
Affiliation
Tokyo Metropolitan University

Research Areas

 
 

Academic & Professional Experience

 
Oct 2006
 - 
Today
Professor, Faculty of System Design, Tokyo Metropolitan University
 
Apr 2005
 - 
Sep 2006
Associate Professor, Faculty of System Design, Tokyo Metropolitan University
 
Apr 1998
 - 
Mar 2005
Associate Professor, Faculty of Mechanical Engineering, Tokyo Metropolitan University
 
Apr 1991
 - 
Mar 1998
Research Associate, Faculty of Mechanical Engineering, Tokyo Metropolitan University
 
Jun 1990
 - 
Mar 1991
Researcher, Research and Development Laboratory, AMADA Co., Ltd.
 

Education

 
Apr 1986
 - 
Jul 1990
Doctoral Course, Graduate School of Mechanical Engineering, Kyoto University
 
Apr 1984
 - 
Mar 1986
Master Course, Graduate School of Mechanical Engineering, Kyoto University
 
Apr 1980
 - 
Mar 1984
Faculty of Mechanical Engineering, Kyoto University
 

Published Papers

 
Hu J, Shimizu T, Yang M
Ultrasonics sonochemistry   48 240-248   Nov 2018   [Refereed]
Yuma Suzuki, Kazuhiro Morioka, Tetsuhide Shimizu, Hizuru Nakajima, Katsumi Uchiyama, Ming Yang
Biotechnology and Biotechnological Equipment   32 520-529   Mar 2018
© 2017 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. For high sensitivity and rapid reaction of enzyme-linked immunosorbent assay (ELISA), the film-stack reaction field with micro-pillars array was designed a...
Hidetoshi Komiya, Tetsuhide Shimizu, Yoshikazu Teranishi, Kazuo Morikawa, Ming Yang
Thin Solid Films   644 99-105   Dec 2017
© 2017 The local chemical composition of (Ti, Al)N thin films grown on the inner-walls of holes by high-power impulse magnetron sputtering (HiPIMS) was analyzed in detail to investigate the transport behavior of ionized and neutral species into sm...
Qiu Zheng, Tetsuhide Shimizu, Ming Yang
International Journal of Mechanical Sciences   133 416-425   Nov 2017
© 2017 Elsevier Ltd To contribute to process design of microforming at elevated temperatures, the effect of grain size on mechanical behavior of pure titanium foils was studied. Uniaxial tensile tests and microbending tests were performed at diffe...
Yuma Suzuki,Kazuhiro Morioka,Soichiro Ohata,Array,Hizuru Nakajima,Katsumi Uchiyama,Ming Yang
Sensors   17(7) 1608   Jul 2017   [Refereed]
L. Heinrich, H. Kobayashi, H. Kobayashi, T. Shimizu, M. Yang, F. Vollertsen, F. Vollertsen
Journal of Physics: Conference Series   896    Sep 2017
© Published under licence by IOP Publishing Ltd. Nowadays, an increasing demand for small metal parts in electronic and automotive industries can be observed. Deep drawing is a well-suited technology for the production of such parts due to its exc...
Zhang Y, Mao S, Suzuki Y, Tanaka Y, Kawaguchi M, Zhang W, Zeng H, Nakajima H, Yang M, Uchiyama K
Chemical communications (Cambridge, England)   54(7) 719-722   Jan 2018   [Refereed]
Tetsuhide Shimizu, Hidetoshi Komiya, Yoshikazu Teranishi, Kazuo Morikawa, Hiroshi Nagasaka, Ming Yang
Thin Solid Films   624 189-196   Feb 2017
� 2016 Elsevier B.V. (Ti, Al)N films were deposited inside 1�mm scale small holes from a Ti 0.33 Al 0.67 alloy target by high-power impulse magnetron sputtering (HiPIMS). To investigate the transport behavior of sputtered and gas species of te...
Ming Yang, Tetsuhide Shimizu
AIP Conference Proceedings   1817    Feb 2017
© 2017 Author(s). A 3D LSPR sensor was fabricated by using CNTs as support and depositing AuNPs on the support in this study. We proposed a simple process to arrange AuNPs to CNTs by using vacuum deposition and annealing for 3D LSPR sensor. In ord...
Jun Hu, Tetsuhide Shimizu, Ming Yang
Procedia Engineering   207 1063-1068   Jan 2017
© 2017 The Authors. Published by Elsevier Ltd. Conventional ultrasonic-assisted forming in macro scale has been studied widely for decades. However, ultrasonic dynamic impact effect, which only occurs in micro-scale, has never been studied thoroug...
Ming Yang, Tetsuhide Shimizu
International Journal of Materials and Product Technology   54 32-44   Jan 2017
© 2017 Inderscience Enterprises Ltd. Processes with high energy assistance, such as ultrasonic vibration or local heating, and automatic assembly system in a progressive die were developed for micro metal forming in order to improve process accura...
Jochen Vorholt, Jochen Vorholt, Tetsuhide Shimizu, Hiroyuki Kobayashi, Hiroyuki Kobayashi, Lukas Heinrich, Hendrik Flosky, Frank Vollertsen, Frank Vollertsen, Ming Yang
Procedia Engineering   207 2209-2214   Jan 2017
© 2017 The Authors. Published by Elsevier Ltd. In the present study, to observe the contact interface during sheet metal forming process, in-situ observation system using transparent silica glass dies and high speed recording camera was developed....
Ryota Ogura, Tetsuhide Shimizu, Tomomi Shiratori, Ming Yang
Procedia Engineering   207 1016-1021   Jan 2017
© 2017 The Authors. Published by Elsevier Ltd. Application of resistance heating in micro forming processes is effective for improving formability of thin foils and accuracy of products. Current flows to thin foils can achieve a rapid heating time...
Yang Ming, Shimizu Tetsuhide
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY   54(1-3) 32-44   2017   [Refereed]
Zheng Qiu, Shimizu Tetsuhide, Yang Ming
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   230 233-243   Apr 2016   [Refereed]
Bai Yang, Yang Ming
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   229 367-374   Mar 2016   [Refereed]
Ryo Yamaguchi, Tetsuhide Shimizu, Ming Yang
Key Engineering Materials   716 208-214   Jan 2016
© 2016 Trans Tech Publications, Switzerland. The demand of microforming is increasing as one of the economical production methods for small metallic parts. However, the formability of metallic foils decreases with decreasing ratio of thickness to ...
Qiu Zheng, Tetsuhide Shimizu, Ming Yang
Key Engineering Materials   716 215-224   Jan 2016
© 2016 Trans Tech Publications, Switzerland. Strain gradient is known as an important factor that influences springback of bent components in microscale. Compared with thicker foils, thinner foils usually indicate more strain gradient due to non-u...
Tomohiro Murakami, Ming Yang, Hiroshi Kishi, Sigeki Mori, Masahiro Ohkawa, Eiichi Fujino
Key Engineering Materials   716 510-520   Jan 2016
© 2016 Trans Tech Publications, Switzerland. Blanking noise and blanking vibration are causes of pollution. At the same time, blanking vibration disturbs the high precision of a press work product, and shortens the life expectancy of the press mac...
Singh H, Shimojima M, Ngoc TC, Quoc Huy NV, Chuong TX, Le Van A, Saijo M, Yang M, Sugamata M
Journal of medical virology   87(12) 2145-2148   Dec 2015   [Refereed]
Hiroki Makino, Jing Zhu, Tsuyoshi Okubo, Norio Tagawa, Ming Yang
2015 IEEE International Ultrasonics Symposium, IUS 2015      Nov 2015
© 2015 IEEE. For high performance piezoelectrics, few technology options are currently available. Recent studies projected a novel sound pressure sensor [1][2] using a ferroelectrics-gated FET [3], but few were reported with an evident observatio...
Yang Ming, Shimizu Tetsuhide
MATERIALS AND MANUFACTURING PROCESSES   30(10) 1229-1234   Oct 2015   [Refereed]
Tetsuhide Shimizu, Tai Kakegawa, Ming Yang
MATEC Web of Conferences   21    Aug 2015
© 2015 Owned by the authors, published by EDP Sciences. Application of diamond like carbon (DLC) films are reported in several microforming processes, in view of its great tribological performance owe to the low friction and the high chemical stab...
Kazushi Koshimizu, Tetsuhide Shimizu, Ming Yang
MATEC Web of Conferences   21    Aug 2015
© 2015 Owned by the authors, published by EDP Sciences. Microforming has been received much attention in the recent decades due to the wide use of microparts in electronics and medical purposeFor the further functionalization of these micro device...
Zheng Qiu, Shimizu Tetsuhide, Yang Ming
STEEL RESEARCH INTERNATIONAL   86(8) 869-876   Aug 2015   [Refereed]
Suzuki Y, Shimizu T, Yang M
Bio-medical materials and engineering   28(5) 555-565   2017   [Refereed]
Harpal Singh,Masayuki Shimojima,Tomomi Shiratori,Le Van An,Masami Sugamata,Ming Yang
Sensors   15(7) 16503-16515   Jul 2015   [Refereed]
Mao S, Sato C, Suzuki Y, Yang J, Zeng H, Nakajima H, Yang M, Lin JM, Uchiyama K
Chemphyschem : a European journal of chemical physics and physical chemistry   17(20) 3155-3159   Oct 2016   [Refereed]
Singh H, Morioka K, Shimojima M, Van An L, Nakajima H, Hemmi A, Uchiyama K, Loong SK, AbuBakar S, Yang M, Sugamata M
Japanese journal of infectious diseases   69(5) 435-438   Sep 2016   [Refereed]
Singh H, Shimojima M, Fukushi S, Fukuma A, Tani H, Yoshikawa T, Taniguchi S, Yang M, Sugamata M, Morikawa S, Saijo M
Emerging microbes & infections   5 e44   May 2016   [Refereed]
Singh H, Yoshikawa T, Kobayashi T, Fukushi S, Tani H, Taniguchi S, Fukuma A, Yang M, Sugamata M, Shimojima M, Saijo M
Scientific reports   5 16517   Nov 2015   [Refereed]
Tetsuhide Shimizu, Ming Yang, Ken ichi Manabe
Wear   330-331 49-58   May 2015
© 2015 Elsevier B.V. To generally describe the size effect in microforming operation under dry friction, which strongly depends on the contact state and geometrical/mechanical properties of the surface, the present study proposes a classification ...
Tetsuhide Shimizu, Yoshikazu Teranishi, Kazuo Morikawa, Hidetoshi Komiya, Tomotaro Watanabe, Hiroshi Nagasaka, Ming Yang
Thin Solid Films   581 39-47   Apr 2015
© 2014 Elsevier B.V. All rights reserved. (Ti,Al)N films were deposited from a Ti 0.33 Al 0.67 alloy target with a high Al content at a substrate temperature of less than 150 °C using high power impulse magnetron sputtering (HIPIMS) plasma. The pu...
Bai Yang, Yang Ming
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING   16(4) 685-691   Apr 2015   [Refereed]
Yong Jin, Shigeo Yasuhara, Tetsuhide Shimizu, Ming Yang
Key Engineering Materials   661 142-148   Jan 2015
© (2015) Trans Tech Publications, Switzerland. Boron nitride films were deposited on silicon substrate by a hot filament assisted chemical vapor deposition (HFCVD) system. The tris(dimethylamino)borane(B[N(CH3)2]3) was used as the single source pr...
Yong Jin, Shigeo Yasuhara, Tetsuhide Shimizu, Ming Yang
Manufacturing Review   2    Jan 2015
© Y. Jin et al., Published by EDP Sciences, 2015. Boron nitride film was deposited on (1 0 0)-oriented silicon substrate by hot filament assisted chemical vapor deposition. The B[N(CH 3 ) 2 ] 3 (Tris(dimetylamino)borane, TDMAB) was used as the si...
Kazushi Koshimizu, Qiu Zheng, Tetsuhide Shimizu, Ming Yang
Manufacturing Review   2    Jan 2015
© K. Koshimizu et al., Published by EDP Sciences, 2015. Microforming receives a lot of attentions in the recent years due to the increased use of microparts in electronics and medical sectors. For the further functionalization of these micro devic...
Kazushi Koshimizu, Tetsuhide Shimizu, Ming Yang
Manufacturing Review   2    Jan 2015
© K. Koshimizu et al., Published by EDP Sciences, 2015. Microforming has been received much attention in the recent decades due to the wide use of microparts in electronics and medical applications. For the further functionalization of these micro...
Tomomi Shiratori, Yohei Suzuki, Shizuka Nakano, Ming Yang, Takafumi Komatsu
Manufacturing Review   2    Jan 2015
© T. Shiratori et al., Published by EDP Sciences, 2015. Over the last decade, development of fine-grained materials and investigation into the effect of different grain sizes on metal forming at the micro-scale have been seen worldwide. There were...
Zheng Qiu, Shimizu Tetsuhide, Yang Ming
MANUFACTURING REVIEW   2    2015   [Refereed]
Shimizu Tetsuhide, Kosuge Shingo, Yang Ming
MANUFACTURING REVIEW   2    2015   [Refereed]
Singh H, Morita T, Suzuki Y, Shimojima M, Le Van A, Sugamata M, Yang M
Bio-medical materials and engineering   26(3-4) 115-127   2015   [Refereed]
Singh H, Shimojima M, Fukushi S, Le Van A, Sugamata M, Yang M
Bio-medical materials and engineering   26 Suppl 1 S45-53   2015   [Refereed]
Zheng Qiu, Shimizu Tetsuhide, Shiratori Tomomi, Yang Ming
MATERIALS & DESIGN   63 389-397   Nov 2014   [Refereed]
Tetsuhide Shimizu, Hidetoshi Komiya, Tomotaro Watanabe, Yoshikazu Teranishi, Hiroshi Nagasaka, Kazuo Morikawa, Ming Yang
Surface and Coatings Technology   250 44-51   Jul 2014
For further enhancement of the tool life in microforming process, a high power impulse magnetron sputtering (HIPIMS) deposition technique, which has well-known advantageous features, such as dense and smooth surface, and three-dimensional uniformi...
Tetsuhide Shimizu, Masahiro Ogawa, Ming Yang, Ken ichi Manabe
Materials and Design   56 604-612   Jan 2014
Metal foils are highly advantageous for producing microcomponents with high-aspect-ratio three-dimensional shapes by miniaturizing the process dimensions in sheet-metal-forming technologies. To characterize existing rolled metal foils at manufactu...
Yong Jin, Shigeo Yasuhara, Tetsuhide Shimizu, Ming Yang
Procedia Engineering   81 1909-1914   Jan 2014
© 2014 The Authors. Published by Elsevier Ltd. Boron nitride films were deposited onto Si substrates by hot filament chemical vapor deposition. The Tris(dimetylamino)borane (B[N(CH 3 ) 2 ] 3 ) was used as source precursor, and the ammonia gas was ...
Tetsuhide Shimizu, Tai Kakegawa, Ming Yang
Procedia Engineering   81 1884-1889   Jan 2014
© 2014 The Authors. Published by Elsevier Ltd. As an approach to enhance the tribological performance of diamond like carbon (DLC) coating films for dry microforming operations, the present study applied the micro-textured structures to the DLC fi...
Takashi Ikushima, Tetsuhide Shimizu, Ming Yang
Advanced Materials Research   939 146-151   Jan 2014
Tensile tests of titanium alloy (Ti-6Al-4V) with different thickness of 0.4 mm and 0.3 mm, were performed to investigate thickness dependency of superplasticity. To keep the same inner microstructure between specimens with different thicknesses, e...
Bai Yang, Yang Ming
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   214(1) 21-28   Jan 2014   [Refereed]
Zheng Qiu, Aoyama Tatsuya, Shimizu Tetsuhide, Yang Ming
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014   81 1481-1486   2014   [Refereed]
Aoyama Tatsuya, Shimizu Tetsuhide, Zheng Qiu, Yang Ming
Advances in Materials and Processing Technologies XVI   939 409-414   2014   [Refereed]
Bai Yang, Yang Ming
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014   81 1475-1480   2014   [Refereed]
Bai Yang, Yang Ming
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES XV   773-774 687-693   2014   [Refereed]
Bai Yang, Yang Ming
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY   213(3) 330-336   Mar 2013   [Refereed]
Bai Yang, Nishikawa Kenji, Yang Ming
MATERIALS TRANSACTIONS   53(3) 489-494   Mar 2012   [Refereed]
Ryohei Fujieda, Ming Yang
Advanced Materials Research   403-408 4411-4415   Jan 2012
In the conventional sensor using localized surface Plasmon resonance (LSPR), metallic particle has been only allocated on substrate in two dimensions. We attempt to allocate metal particles in three dimensions to improve sensitivity than a convent...
Takashi Ikushima, Ming Yang
Advanced Materials Research   403-408 1153-1156   Jan 2012
We made the open well biochemical analysis system using piled up CNTs as the reaction fields on a porous glass substrate. The effects of the structures of CNTs and the surface activation using O2 plasma to the sensitivity are evaluated. Reaction f...
Tatsuya Sameshima, Takuya Yabe, Ming Yang
Advanced Materials Research   403-408 1146-1152   Jan 2012
In this study, carbon nanotubes (CNTs) are anticipated as nano/micro structured reaction field for micro bio-analysis. CNTs reaction field were made on quartz glass substrate using chemical vapor deposition and self-organization of CNTs. To evalua...
H. Tanabe, M. Yang
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   1020-1024   Dec 2011
As development of micro-electro-mechanical-systems (MEMS) technology, microforming Is gaining attention because of some advantages such as material and structural flexibility, low prices, and high production rate. Heat assisted microforming is abl...
T. Shimizu, S. Iwaoka, M. Yang, K. Manabe
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   979-984   Dec 2011
A novel high precision strip drawing tester Is developed as a tribo-simulator for the micro sheet metal forming of ultra-thin metal foils. By using this equipment, scaled foil strip drawing test is conducted with three different scale dimensions (...
Y. Bai, K. Nishikawa, M. K. Roy, M. Yang
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   956-961   Dec 2011
A vibration-assisted micro-forming was performed on phosphor bronze C5191 foils at different conditions to obtain a reliable surface that has low surface roughness values. When micro-formed with vibration at proper experiment conditions, the surfa...
M. Yang, T. Aizawa, S. Nakano, K. Ito
Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011   1093-1096   Dec 2011
In this study, a precise micro press forming system was developed and applied to fabricate micro parts/units. The parts can be formed in several processes and assembled in a unit in the progressive die automatically. Micro forging processes are co...
Yuhi Kono, Kensuke Kanda, Satoshi Ogata, Ming Yang
Proceedings of SPIE - The International Society for Optical Engineering   7522    Dec 2010
Nanoparticle imaging using evanescent illumination is a very useful technique for elucidating physical phenomena near the walls of microchannels in microfluidic systems. Since the intensity of evanescent illumination decays exponentially with dist...
Takuma Mizukoshi, Kensuke Kanda, Satoshi Ogata, Ming Yang
Proceedings of SPIE - The International Society for Optical Engineering   7522    Dec 2010
In microbiochemical analysis, the concentration of biomaterials near a wall greatly affects the detection and reaction efficiency. In this paper, we evaluate the interaction between nanoparticles and a microchannel wall. We measured the concentrat...
Tetsuhide Shimizu, Ken Ichi Manabe, Ming Yang
Key Engineering Materials   443 110-115   Aug 2010
This study focuses on the surface deformation of thin metal foils caused by friction. To clarify the effect of the relative ratio of surface plastic region to the foil thickness on global deformation behavior, strip drawing tests for ultra thin me...
Yang Ming, Kabasawa Yasunari, Ito Kuniyoshi
FOURTH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS   7522    2010   [Refereed]
S. Nakano, K. Ito, M. Yang, M. Yoshida, H. Ogiso
Surface and Coatings Technology   203 2776-2779   Jun 2009
Micro electro-mechanical system (MEMS) devices fabricated by photo lithography techniques require expensive equipment and resources. MEMS devices such as acceleration sensors, pressure sensors, and optical scanners are only components of more comp...
Satoshi Ogata, Kensuke Kanda, Takuya Onozuka, Ming Yang
Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B   74 2452-2458   Dec 2008
The flow characteristics of a dilute polymer solution and distilled water near the wall surface were clarified experimentally using evanescent wave illumination. Based on the integrated value of the particle tracking velocimetry data in the illumi...
K. Manabe, T. Shimizu, H. Koyama, M. Yang, K. Ito
Journal of Materials Processing Technology   204 89-93   Aug 2008
Metal forming technology has been paid great attention as one of the most economical mass production methods for sub-millimeter-scale microparts as well as macro-scale parts. Although tools and dies are essential for the manufacture of microformed...
Ming Yang, Atsushi Osako
Journal of Materials Processing Technology   201 315-318   May 2008
Fabrication and surface treatment of die are important issues for micro-metal forming. Ion beam irradiation was applied as a new process for surface finish of micro-die after the machining in this paper. Ar ion plasma by electron cyclone resonance...
Tetsuhide Shimizu, Kuniyoshi Ito, Yushiro Murashige, Ming Yang, Ken Ichi Manabe
9th International Conference on Technology of Plasticity, ICTP 2008   193-198   Jan 2008
This study focuses on surface topography of the tool and the blank material in micro-deep drawing and aim to clarify the effects of surface asperities on microforming characteristics from the viewpoint of the design of tools and materials. Micro-d...
Ming Yang, Hiromi Saito, Kuniyoshi Ito
9th International Conference on Technology of Plasticity, ICTP 2008   448-453   Jan 2008
A micro metallic pump with dimension of several millimeters was designed and fabricated. The pump consists of two check valves and could be driven by a PZT actuator. All of the parts are made of metallic materials, and assembled in a unit. The pum...
Ming Yang, Atsushi Oosako, Shizuka Nakano, Kazuo Morikawa
Steel Research International   79 421-426   Jan 2008
Irradiation of the die surface with plasma Ion beam was applied to finish surface of the micro die after machining and then coating with DLC (Diamond liked carbon) thin film to improve tribological properties in this paper. WC/Co alloy was used as...
H. B. Xie, Z. Y. Jiang, X. H. Liu, G. D. Wang, A. K. Tieu, M. Yang, K. Manabe
Journal of Materials Processing Technology   187-188 715-719   Jun 2007
Control of coiling temperature for hot rolled strip is an important topic in steel manufacturing process. The conventional control system which describes laminar cooling process with an analytical model does not have a good adaptive capability whe...
Ming Yang, Ken Ichi Manabe, Kuniyoshi Ito
Journal of Mechanical Science and Technology   21 1452-1455   Jan 2007
A micro press forming and in-process assembly technology were developed and applied to fabrication of metal parts and units. Technologies based on high-energy beams, such as ion and short pulse laser were developed for fabrication of features of d...
Kensuke Kanda,Array,Kazuyoshi Jingu,Ming Yang
J. Visualization   10(2) 207-215   2007   [Refereed]
Kanda Kensuke, Yang Ming
JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING   49(4) 1190-1196   Nov 2006   [Refereed]
Ken ichi Manabe, Masamitsu Suetake, Hiroshi Koyama, Ming Yang
International Journal of Machine Tools and Manufacture   46 1207-1211   Sep 2006
In this study, to determine the optimal loading path of tube hydroforming process, a database-assisted fuzzy process control algorithm proposed previously by the authors was applied to T-branch forming with a counterpunch. The tubular material use...
Kinuko Fujimoto, Ming Yang, Masanao Hotta, Hiroshi Koyama, Shizuka Nakano, Kazuo Morikawa, Julie Cairney
Journal of Materials Processing Technology   177 639-643   Jul 2006
A surface treatment process for micro-dies was investigated in this study. A high-energy ion beam irradiation for finishing die-surfaces with features of sub-millimeter size and a diamond-like carbon (DLC) coating process on the surface of the die...
Kensuke Kanda, Ming Yang
Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B   72 69-74   Jan 2006
In recent biological and chemical analysis fields, micro analytical chips are attracted attention because of some advantages such as high efficiency, small heat capacity and high speed reaction. In those chips, bio-chemical reagents and samples ar...
Satoshi Ogata, Kensuke Kanda, Kohei Sakai, Ming Yang
American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED      Jan 2006
The velocity profile of a dilute polymer solution and a surfactant solution near the wall surface in a microchannel was clarified using evanescent wave illumination and a particle tracking velocimetry system. Fluorescent particles with a diameter ...
Kensuke Kanda, Satoshi Ogata, Ming Yang
American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED   261 FED 291-297   Dec 2005
For the investigation of near surface phenomena, a novel method, which is to measure velocity profile in the direction of depth, are suggested. By changing the angle of induce light, illuminated penetration depth is changed. The velocities of fluo...
K. Kanda, M. Yang
Micro Total Analysis Systems - Proceedings of MicroTAS 2005 Conference: 9th International Conference on Miniaturized Systems for Chemistry and Life Sciences   1 614-616   Jan 2005
To analyze near surface phenomenon such as the interaction between wall and bio-molecules, which relate to reaction efficiency for the micro total analysis system utilizing the reaction on the wall surface, concentration profile and Brownian motio...
Y. B. Chen, Y. B. Chen, Z. Y. Jiang, H. T. Zhu, A. K. Tieu, M. Yang, K. Manabe
Advanced Technology of Plasticity 2005 - Proceedings of the 8th International Conference on Technology of Plasticity, ICTP 2005      Jan 2005
Backpropagation neural network has been used in shape prediction in cold strip mill. To obtain high prediction accuracy, the training data should be preprocessed. In this paper, the influence of difference preprocessing methods used in artificial ...
Tomonori Sasaki, Kinuko Fujimoto, Ming Yang
Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A   71 102-107   Jan 2005
A method of improving mechanical properties of Al thin films by low energy ion irradiation treatment after the deposition was proposed in this study. The surface of the Al thin films deposited on the glass substrate was irradiated with low energy ...
Tetsuya Yagami, Ken Ichi Manabe, Ming Yang, Hiroshi Koyama
Journal of Materials Processing Technology   155-156 2099-2105   Nov 2004
A sheet forming simulator with a finely segmented blank holder for stamping process of non-circular parts was developed to confirm the effect of variable distributed blank holding pressure (BHP). The BHP was controlled through an intelligent press...
Katsumi Uchiyama, Ming Yang, Takeshi Sawazaki, Hiroya Shimizu, Satoshi Ito
Sensors and Actuators, B: Chemical   103 200-205   Sep 2004
The Ah-Immunoassay method was developed using a Bio-MEMS approach and applied to the evaluation of dioxin toxicity in this study. The aim of the research is to develop a real time sensing system for the analysis of Dioxins, generated at the air fl...
T. Sasaki, T. Sasaki, M. Yang, S. Fukushima, R. Tsukano
Journal of Materials Processing Technology   151 263-267   Sep 2004
In this study a CAE-assisted nano-indentation measurement system has been development and applied for quantitatively evaluating the elastic properties of anisotropic thin films. The measurement system is based on a nano-indentation test with a sph...
M. Yang, Y. Akiyama, T. Sasaki
Journal of Materials Processing Technology   151 232-236   Sep 2004
In sheet metal forming, quantitative evaluation of the spring-back phenomenon is one of the most important issues. In this study, in order to clarify the influence of plastic deformation on the changes of material properties such as the elastic mo...
Kensuke Kanda, Ming Yang
American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS   377-383   Jan 2004
For the establishment of the design methodologies of micro fluidic chips, the essential analysis of the flow behavior on the micro-meter scale and surface interactions on the nano-scale has been investigated. The understanding of bio-fluid flow be...
Tomonori Sasaki, Kinuko Fujimoto, Ming Yang
American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS   173-179   Jan 2004
A new methodology using very low energy Ar ion irradiation is proposed to improve the mechanical properties of thin metal films deposited by sputtering. In this study, accelerating voltage of Ar ion plasma was set to lower than 100V, and several c...
M. Yang, K. Manabe, K. Hayashi, M. Miyazaki, N. Aikawa
Journal of Materials Processing Technology   139 368-372   Aug 2003
The authors proposed a friction source detection system using multi-acoustic emission (AE) sensors and data fusion system in this study. In this work, three AE sensors are positioned at the metal forming tool for identification of the location of ...
Tomonori Sasaki, Ming Yang, Nobuyuki Moronuki, Yuji Furukawa
Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A   68 307-312   Feb 2002
A method of improving mechanical properties of thin films by low energy ion irradiation treatment after the deposition was proposed in this study. The low energy Ar ion irradiation treatment is applied to aluminum thin films, which are widely appl...
M. Yang, K. Manabe
Metals and Materials International   4 315-318   Dec 1998
In this study, an artificial intelligent (AI) V-bending process control system with FEM simulation database was developed in order to achieve the production with high accuracy and flexibility. An adaptive filter was proposed to modify the simulate...
Ming Yang, Ken Ichi Manabe
American Society of Mechanical Engineers, Aerospace Division (Publication) AD   57 19-25   Dec 1998
In this study, an intelligent tool system for flexible L-bending of sheet metals is developed. The punch and die are adaptively actuated by hydraulic cylinders incorporated in the punch and die, respectively. An adaptive structure with high stiffn...
K. Manabe, M. Yang, S. Yoshihara
Journal of Materials Processing Technology   80-81 421-426   Dec 1998
A new in-process identification method of material properties and lubrication condition in the deep-drawing process of anisotropic sheet metals is proposed and applied to the adaptive process control of the blank holding force (BHF). The method is...
Ming Yang, Ken Ichi Manabe, Hisashi Nishimura
Smart Materials and Structures   7 530-536   Aug 1998
A new intelligent tool system for sheet metal forming is proposed, and a flexible L-bending control system using several sensors incorporated in the tools is developed. The system is autonomous and capable of changing the shape of the tools and th...
Shoichiro Yoshihara, Ken Ichi Manabe, Ming Yang, Hisashi Nishimura
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   64 4039-4044   Jan 1998
The mechanism on improvement of the drawability by using the fuzzy adaptive BHF (blank holder force) control has been studied in circular-cup deep-drawing process. The deep-drawing tests were carried out using aluminum alloy and cold rolled steel ...
Ming Yang, Hisashi Nishimura
Keikinzoku/Journal of Japan Institute of Light Metals   47 415-420   Aug 1997
The formability is evaluated by a tensile test and several deep drawing tests. The tensile test of the sheet carried out at room temperature with strain rates ε̇=0.01 to 20 indicates that the elongation increases with increase in strain rates. It ...

Misc

 
楊明
塑性加工シンポジウム   323rd 27‐34   Sep 2017
楊明
ぷらすとす   1(8) 563‐566   Aug 2018
村上智広, 大川正洋, 來住裕, 楊明
塑性加工連合講演会講演論文集   68th 173‐174   Oct 2017
楊明
天田財団助成研究成果報告書   29 1‐6   Oct 2016
楊明
塑性加工春季講演会講演論文集   2017 1‐2   May 2017
白鳥智美, 鈴木洋平, 粟飯原拓也, 中野禅, 相澤龍彦, 楊明
塑性加工連合講演会講演論文集   67th 35‐36   Sep 2016
楊明
塑性と加工   57(667) 781‐783(J‐STAGE)   2016
相澤龍彦, 楊明
芝浦工業大学特別教育・研究報告集(CD-ROM)   2014 311-314   Jun 2015
牧野紘樹, 祝せい, 大久保毅, 楊明, 田川憲男
エレクトロニクス実装学会講演大会講演論文集(CD-ROM)   29th ROMBUNNO.16A3‐4   Mar 2015
白鳥智美, 中野禅, 鈴木洋平, 加藤正仁, 佐藤直子, 小松隆史, 楊明
塑性と加工   56(657) 885-890 (J-STAGE)   2015
楊明
塑性と加工   56(657) 824-828 (J-STAGE)   2015
掛川泰, 清水徹英, 鷺坂芳弘, 楊明
塑性と加工   56(657) 891-896 (J-STAGE)   2015
白鳥智美, 鈴木洋平, 中野禅, 加藤正仁, 楊明, 小松隆史
塑性と加工   56(652) 401-406 (J-STAGE)-406   2015
In the last decade, the development of fine-grained materials and investigations of the effects of the grain size on metal forming on a microscale have been carried out. However, there are few studies on the effects of the grain size on the metal ...
村上智広, 楊明, 來住裕
塑性と加工   56(651) 305-310 (J-STAGE)-310   2015
In this study, we examined the noise and the vibration in blanking with a press machine. Under the blanking speed V=15mm/s, we compared the blanking using a screw drive servo press with that using a general-purpose crank press. The blanking...
大貫慎輔, 楊明, 大矢禎一
日本生化学会大会(Web)   88th 3P0804 (WEB ONLY)   2015
相澤龍彦, 楊明
芝浦工業大学特別教育・研究報告集(CD-ROM)   2013 333-336   Jun 2014
清水徹英, 楊明
東京都立産業技術研究センター研究成果発表会要旨集   2014(June) 40   Jun 2014
楊明, 西村尚
塑性と加工   55(645) 897-901 (J-STAGE)-901   Oct 2014
清水徹英, 楊明, 真鍋健一
塑性と加工   55(636) 3-8 (J-STAGE)-8   Jan 2014
KAKEGAWA Tai, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2014(0) _J1110103--_J1110103-   2014
As development of micro electro mechanical systems (MEMS) technology, microforming is gaining attention. And, lubricant-free microforming process is a strong demand. Due to the low effect of lubricant in microscale dimensions, the tribological iss...
KOSHIMIZU Kazushi, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2014(0) _J2220103--_J2220103-   2014
In recent decades, micro forming has been received much attention because of the wide use of microparts in electronics and medical devices. For the further functionalization of these micro devices, high functional surface with noble metals such as...
SHIMIZU Tetsuhide, TERANISHI Yoshikazu, WATANABE Tomotaro, NAGASAKA Hiroshi, KOMIYA Hidetoshi, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2014(0) _J2220104--_J2220104-   2014
With expanding variety of biomedical polymers, low temperature growth of thin films on polymeric substrate is strongly required. One of the high potential methods for low temperature deposition, which can expect the excellent film properties, is h...
楊明
塑性と加工   52(607) 911-915   Aug 2011
SHIMIZU Tetsuhide, YANG Ming, MANABE Ken-ichi
Journal of the Japan Society for Technology of Plasticity   55(636) 3-8   2014
YANG Ming, NISHIMURA Hisashi
Journal of the Japan Society for Technology of Plasticity   55(645) 897-901   2014
FURUSHIMA Tsuyoshi, YANG Ming
Journal of the Japan Society for Technology of Plasticity   55(636) 17-18   2014
Servo Press Research Committee
Journal of the Japan Society for Technology of Plasticity   54(631) 741-742   Aug 2013
小山純一, 楊明
塑性と加工   51(596) 898-902 (J-STAGE)-902   Sep 2010
High-precision measurement and identification of deformation in metal forming is significant. In this study, a die-embedded sensing system with micro-semiconductor sensors fabricated using semiconductor process technology was developed. The die-em...
相澤龍彦, 楊明
芝浦工業大学特別教育・研究報告集(CD-ROM)   2012 416-419   Jun 2013
楊明
塑性と加工   50(583) 765-768   Aug 2009
清水徹英, 楊明
東京都立産業技術研究センター研究成果発表会要旨集   2013(June) 134   Jun 2013
FURUSHIMA Tsuyoshi, YANG Ming
塑性と加工   53(613) 116-117   Feb 2012
楊明, 楊明
塑性と加工   49(571) 783-785   Aug 2008
YANG Ming
Journal of the Japan Society for Technology of Plasticity   52(600) 145-147   Jan 2011
楊明
塑性と加工   49(574) 1064-1065   Nov 2008
SHIMIZU Tetsuhide, YANG Ming, MANABE Ken-ich
塑性と加工   54(626) 235-239   Mar 2013
SUZUKI Yuma, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2013(0) _J161024-1-_J161024-4   2013
We attempt to investigate biomolecule behavior in micro fluid on reaction field of open-well-type micro bioanalytical device (MBD) and influence of structural dimension and surface property of micro structures using multi-physics coupled simulatio...
BAMBA Yoshinori, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2013(0) _J212023-1-_J212023-3   2013
Direct glucose fuel cells have attracted the interests as one of the promising power sources for portable electric devices. To improve the performance of the fuel cells, the addition to the enlargement of electrode, optimal surface structure desig...
YONEOKA Takashi, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2013(0) _J212031-1-_J212031-4   2013
This study presented a simple fabrication process of electrical system based on multi zinc oxide nanowires (ZnO-NWs) for a high sensitive bio-sensor. The process mainly consists from transferring ZnO-NWs to an insulating resin and connecting them ...
SUZUKI Tatsuya, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2013(0) _J212032-1-_J212032-3   2013
The detection method of LSPR using AuNPs has the advantages of label free detection and simple optical setup. The detection principle of LSPR is by comparing plasmonic peak of before and after antigen adsorption, because antigen adhere antibody on...
IKUSHIMA Takashi, SHIMIZU Tetsuhide, YANG Ming
The Proceedings of the Materials and processing conference   2013(0) _630-1_-_630-3_   2013
Thickness of Ti-6A1-4V Ti alloy was reduced by electrochemical etching, and thickness dependency of its superplasticity was investigated by tensile test By means of electrochemical etching thickness of Ti alloy was reduced while keeping the same i...
SHIMIZU Tetsuhide, KOSUGE Shingo, YANG Ming
The Proceedings of the Materials and processing conference   2013(0) _631-1_-_631-4_   2013
清水徹英, 楊明, 真鍋健一
東京都立産業技術研究センター研究成果発表会要旨集   2012(June) 19   Jun 2012
YANG Ming
Journal of the Japan Society for Technology of Plasticity   53(616) 418-420   May 2012
FURUSHIMA Tsuyoshi, YANG Ming
Journal of the Japan Society for Technology of Plasticity   53(613) 116-117   2012
楊明
天田金属加工機械技術振興財団研究概要報告書・国際交流報告書   (23) 5-9   Mar 2011
菅又昌実, 吉田靖子, 清水一史, 矢野一好, 松井岳巳, 鈴木哲, 楊明, 遠藤美代子, 太田伸雄, 吉川泰弘
日本衛生学雑誌   66(2) 398   Feb 2011
YABE Takuya, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2011(0) _J161011-1-_J161011-5   2011
In this study, vertically aligned carbon nanotubes (CNTs) are anticipated as nano/micro structured reaction field for micro bio-analysis. CNTs were synthesized on Silicon substrate using chemical vapor deposition and CNTs reaction field were made ...
IKUSHIMA Takashi, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2011(0) _J161012-1-_J161012-4   2011
We made the open well biochemical analysis system using piled up Carbon nanotubes (CNTs) as the reaction fields on a porous glass substrate. The effects of the structures of CNTs and the surface activation using 02 plasma to the sensitivity are ev...
Fujieda Ryohei, Yang Ming
The Proceedings of Mechanical Engineering Congress, Japan   2011(0) _J161013-1-_J161013-5   2011
In the conventional sensor using localized surface Plasmon resonance, the metallic particle has only allocated on substrate in two dimensions. We attempted that Gold nanoparticles allocated on the substrate in three dimensions were fabricated by g...
YANG M.
Journal of the Japan Society for Technology of Plasticity   49(570) 654-658   Jul 2008
YANG M.
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   47(546) 558-563   Jul 2006
Ren Jun Mou, Yang Ming
The proceedings of the JSME annual meeting   2003(0) 457-458   2003
Using semiconductor processing technology, micro-sensor which embedded in die was fabricated, and a measurement system with a wireless signal processing unit to measure deformation information that is difficult to get directly in metal forming was...
遠藤順一, 楊明, 大橋隆弘
塑性と加工   43(500) 850-854   Sep 2002
TANABE Hiroyuki, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2011(0) _J161023-1-_J161023-5   2011
As development of micro-electro-mechanical-systems (MEMS) technology, microforming is gaining attention because of some advantages such as material and structural flexibility, low prices, and high production rate. Heat assisted microforming not on...
KOSUGE Shingo, YANG Ming
The Proceedings of Mechanical Engineering Congress, Japan   2011(0) _J161042-1-_J161042-4   2011
The biggest factor of the difference of worked angle is occurrence of springback. To solve this problem, in this study, the ultrasonic-vibration assisted bending was performed on stainless steel foils (SUS304) to explore the springback reduction e...
YANG Ming, KOYAMA Jun-ichi
The proceedings of the JSME annual meeting   2010(0) 339-340   2010
Micro-sensor that embedded in die was fabricated by using semiconductor processing technology. A sensing system for V-bending process was developed and its characteristics were evaluated. The influent factors on sensing accuracy were investigated....
楊明
塑性と加工   43(499) 764-767   Aug 2002
FUJIEDA Ryohei, YANG Ming
The proceedings of the JSME annual meeting   2010(0) 197-198   2010
Influence of structural dimension of metallic surface on protein adsorption was investigated by ultraviolet spectrophotometer. Bovine serum albumin was used for this study. As metal surface, the hole microstructure of the column is fabricated by t...
SAMESHIMA Tatsuya, YANG Ming
The proceedings of the JSME annual meeting   2010(0) 201-202   2010
A nanostructured surface for micro reactor was designed and created by synthesizing Carbon Nano-Tubes (CNT) on a quartz glass substrate. Multi-walled CNTs (MWCNT) were vertically synthesized on the surface, and clumped by self-assembly to make dou...
TANABE Hiroyuki, YANG Ming
The proceedings of the JSME annual meeting   2010(0) 205-206   2010
A novel process for fabricating 3-D microscale structures using the vertically aligned carbon nanotubes (CNTs) by controlling the polymer penetration was investigated for application as a micro-reactor. The CNTs were grown by chemical vapor deposi...
FUJIOKA Shoji, YANG Ming
The proceedings of the JSME annual meeting   2010(0) 207-208   2010
In this study, an electron beam is chosen to micro welding due to its deep penetration and thin width. thin metal foils and wires were welded with electron beam welding to investigate weldability of foil and wire. In welding of the thin foils, the...
YABE Takuya, YANG Ming
The proceedings of the JSME annual meeting   2010(0) 209-210   2010
Novel method for efficiently changing the surface characteristics and density of vertically aligned carbon nanotubes (CNTs) using Ar plasma irradiation is proposed in this study. The influence of work volume on the surface characteristics and dens...
Nishikawa Kenji, YANG Ming, ROY Mukesh Kumar, Morikawa Kazuo
The proceedings of the JSME annual meeting   2010(0) 241-242   2010
The purpose of this study is to establish a new micro forming technology for micro-electro-mechanical systems (MEMS) devices, such as micro-pumps, valves, and micro forceps for medical applications. The sheets metal and foil materials are generall...
KIMURA Yu, YANG Ming
The proceedings of the JSME annual meeting   2009(0) 319-320   2009
For the micro molding, influence by the surface property of the die becomes remarkable by scale effect. However, there are a lot of questions about the characteristic of the micro dies surface. In this study, we discussed for establishment of the ...
YANQ Ming, KOBAYASHI Ryuuichi
The proceedings of the JSME annual meeting   2009(0) 253-254   2009
Carbon Nanotubes (CNTs) are anticipated that they are utilized as nano/micro structures for bio-analysis. Vertically aligned CNTs (VACNTs) were synthesized on Si/SiO_2 substrate by Chemical Vapor Deposition. CNTs on Si/SiO_2 were transferred onto ...
KATO Shinnosuke, SUGII Yasuhiko, ITO Keiji, YANG Ming
可視化情報学会誌. Suppl.   28(1) 125-126   Jul 2008
柳本 潤, 湯川 伸樹, 上野 恵尉, 沖 善成, 桑原 利彦, 藤川 真一郎, 山崎 一正, 楊 明, 宇都宮 裕, 石川 孝司, 遠藤 順一, 平尾 隆
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   49(564) 43-50   Jan 2008
Ogawa Hiroki, Yang Ming, Matsumoto Yukiko
The proceedings of the JSME annual meeting   2008(0) 29-30   2008
In this study, microelectron beam welding was applied to the joining of two thin metal foils. An electron beam is adaptable to microwelding due to its deep penetration and thin width. The foil materials used were SUS and Ti with a thickness of 20 ...
KOBAYASHI Ryuichi, YANG Ming
The proceedings of the JSME annual meeting   2008(0) 31-32   2008
A nanostructured surface was designed and created by synthesizing Carbon Nanotubes (CNTs) on a plane substrate. Multi-walled carbon nanotubes (MWNTs) were synthesized on a Si/SiO_2 substrate by alcohol catalytic chemical vapor deposition (ACCVD). ...
OGATA Satoshi, KANDA Kensuke, ONOZUKA Takuya, YANG Ming
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B   74(748) 2452-2458   2008
The flow characteristics of a dilute polymer solution and distilled water near the wall surface were clarified experimentally using evanescent wave illumination. Based on the integrated value of the particle tracking velocimetry data in the illumi...
楊明
塑性と加工   48(559) 744-746   Aug 2007
YAGAMI Tetsuya, MANABE Ken-ichi, YANG Ming
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   48(553) 145-149   Feb 2007
Tanaka Yuuri, Yang Ming
The proceedings of the JSME annual meeting   2007(0) 323-324   2007
Recently, applications of medical devices are developed by combination of between medical science and engineering technology. Materials of medical devices must be studied for adsorption of proteins as bio-material. In this research, we study about...
Koyama Junich, Yang Ming
The proceedings of the JSME annual meeting   2007(0) 227-228   2007
Micro-sensor which embedded in die was fabricated by using semiconductor processing technology. Follow a previous report, we applied the sensing system to V-bending process and we performed a trial to estimate bending angle with this system. In th...
谷上 哲也, 真鍋 健一, 楊 明
Journal of the Japan Society for Technology of Plasticity   48(553) 145-149   2007
A sheet stamping simulator with a segment blank holder is developed to carry out the variable control of distributed blank holder force (BHF) for forming irregular-shape parts. This simulator is designed to study the in-process intelligent control...
TATENO Toshitake, YANG Ming
Journal of JSEE   54(2) 76-80   Mar 2006
Tokyo Metropolitan University, Precision Engineering Department practiced a project-based class, namely the creative project, for the second year students from 2002 to 2005. In this class, students survey a given theme, define a problem, and propo...
Yang MING, OSAKO Atsushi
The proceedings of the JSME annual meeting   2006(0) 425-426   2006
Recently, micro plastic forming is attracted a lot of attention because of their advantage for mass productive and production efficiency. The technologies of creating the micro die occupy an important place in micro plastic forming. It is difficul...
Tanaka Yuuri, Yang Ming, Saitoh Hiromi
The proceedings of the JSME annual meeting   2006(0) 301-302   2006
Recently, the attention of micro-pump which is one of micro-fluidic devices has increased. Micro-pump is expected to use to be application of biological and medical fields. In this research, we fabricated a metallic micro-pump by metal forming. Me...
YANG Ming, KARASHIMA Takashi
The proceedings of the JSME annual meeting   2006(0) 307-308   2006
Concentration of micro particles to wall in a micro channel by using ultrasonic wave was studied. A standing wave with frequency of several MHz was generated in a micro channel. The efficiency of the concentration depended on the particle size was...
乾正知, 谷水義隆, 寺本孝司, 橋本安弘, 山根八洲男, 楊明
生産学術連合会議資料   9th 1-10   2006
楊明
塑性加工シンポジウム   243rd 39-46   Nov 2005
小山純一, 楊明, 今井一成
塑性加工連合講演会講演論文集   56th 447-448   Nov 2005
藤本絹子, 小山寛, 中野禅, 森河和雄, 楊明, CAIRNEY Julie
塑性加工連合講演会講演論文集   56th 315-316   Nov 2005
楊明, 伊藤国吉, 堀田昌直, 斉藤弘巳, 淵上光一, 上野邦香, 古川勇二, 小山寛, 深津拡也, 中野禅, 森河和雄, 壬生捷利
プレス技術   43(12) 87-90   Oct 2005
楊明
塑性と加工   46(535) 784-786   Aug 2005
楊明
塑性と加工   46(535) 776-779   Aug 2005
佐々木智憲, 楊明
東京都立産業技術研究所研究発表会要旨集   2005 23   May 2005
岡元亮仁, 斉藤弘己, 伊藤国吉, 神田健介, 楊明
日本機械学会関東支部総会講演会講演論文集   11th 297-298   Mar 2005
SASAKI Tomonori, FUJIMOTO Kinuko, YANG Ming
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   71(701) 102-107   Jan 2005
A method of improving mechanical properties of Al thin films by low energy ion irradiation treatment after the deposition was proposed in this study. The surface of the Al thin films deposited on the glass substrate was irradiated with low energy ...
SASAKI Tomonori, YANG Ming
The proceedings of the JSME annual meeting   2005(0) 125-126   2005
A method of improving mechanical properties of Nickel (Ni) thin films was proposed in this study. Ni thin films were electroplated on the Silicon (Si) substrate. The film with which some kinds of film thickness differs was formed, and it investiga...
MANABE Ken-ichi, YANG Ming, NOUKA Hiroaki, KOYAMA Hiroshi, ITO Kuniyoshi
The Proceedings of Conference of Kanto Branch   2005(0) 293-294   2005
This research aims to investigate how the tool roughness influences the formed cup accuracy and forming characteristics in micro-cup drawing and to collect the data for a micro-die design guideline. In this paper, a specially designed micro deep-d...

Conference Activities & Talks

 
Investigation on dynamic impact effect of ultrasonic-assisted compression test
Jun HU
APSTP 2017(The First Asia Pacific Symposium on Technology of Plasticity)   22 Nov 2017   
Development of a Novel Resistance Heating System for Micro-Forming by Modifying Die Surfce
Ryota OGURA
APSTP 2017(The First Asia Pacific Symposium on Technology of Plasticity)   22 Nov 2017   
The Effect of Geometrical Parameters of Micro-Textured DLC Coatings on Tribological Properties under Dry Sliding Friction
Hironori KAN
APSTP 2017(The First Asia Pacific Symposium on Technology of Plasticity)   22 Nov 2017   
Smart Metal Forming with Servo Press and IoT [Invited]
Ming YANG
APSTP 2017(The First Asia Pacific Symposium on Technology of Plasticity)   22 Nov 2017   
石英ダイを用いたその場観察によるテクスチャチング表面の潤滑特性評価
9 Nov 2017   

Research Grants & Projects

 
Development of an energy free drug delivery system using oxidative expansion of Fe powder(JSPS Grant-in-aid for Challenging Exploratory Research
Project Year: Apr 2015 - Mar 2017    Investigator(s): Ming YANG
Development of high-energy assisted processes for precise micro forming
JSPS Grant-in-Aid for Scientific Research (B)
Project Year: Apr 2011 - Mar 2014    Investigator(s): Ming YANG
Fabricationof functional surface of micro dies and development of equipment for evaluation of its tribological characteristics
JSPS Grant-in-Aid for Scientific Research (B)
Project Year: Apr 2008 - Mar 2011    Investigator(s): Ming YANG
Development of die-embedded micro sensing system for sensing and control system in precise metal forming processes
JSPS Grant-in-Aid for Scientific Research (B)
Project Year: Apr 2005 - Mar 2008    Investigator(s): Ming YANG