SHERPA B. B. (B. B. SHERPA) - マイポータル

基本情報

所属: 熊本大学

ORCID iD: https://orcid.org/0000-0001-8493-6903
J-GLOBAL ID: 202501020467483785
researchmap会員ID: R000083681

研究キーワード

研究分野

ものづくり技術（機械・電気電子・化学工学） / 加工学、生産工学 / Metal joining, Material characterization

経歴

2022年8月 - 現在

熊本大学, Institute of Industrial Nanomaterials (IINa)
2022年6月 - 2025年7月

熊本大学, Institute of Industrial Nanomaterials (IINa), Specified Business Researcher
2017年1月 - 2020年1月

DRDO-TBRL, Metallurgy Group, Senior Research Fellow
2015年1月 - 2017年1月

DRDO-TBRL, Metallurgy Group, Junior Research Fellow
2014年7月 - 2015年1月

Chandigarh University, Mechanical Department, Assistant Professor

学歴

2016年1月 - 2021年7月

Academy of Scientific and Innovative Research (AcSIR), CSIR-CSIO, Ph.D.

受賞

2019年11月

Jack Riegel Student Award, 31st International Symposium on Ballistics (IBS) Symposium
2011年3月

Qualified Graduate Aptitude Test in Engineering (GATE)

論文

The Combined Influence of the Detonator Position and Anvil Type on the Weld Quality of Explosively Welded A1050/AZ31 Joints

Bir Bahadur Sherpa, Shu Harada, Saravanan Somasundaram, Shigeru Tanaka, Kazuyuki Hokamoto

Metals 16(1) 128-128 2026年1月22日査読有り筆頭著者責任著者
Microstructure and strength characteristics of Al 5052-SS 304 explosive clads obtained in open-air and underwater conditions

S. Saravanan, Bir Bahadur Sherpa

Welding in the World 2025年7月査読有り
Investigation of impact properties in unidirectional porous metals fabricated via cylindrical explosion compression

Bir Bahadur Sherpa, Daichi Sunaba, Masatoshi Kuroda, Daisuke Inao, Shigeru Tanaka, Kazuyuki Hokamoto

Materials Today Communications 2025年3月査読有り筆頭著者
Review of the weldability window in explosive welding processes

Bir Bahadur Sherpa, S. Saravanan

Journal of Alloys and Metallurgical Systems 2025年3月査読有り筆頭著者責任著者
Bimetal Cladding via Explosive Welding Process

Bir Bahadur Sherpa

2025年2月19日筆頭著者責任著者
Prediction of shear strength in Al-LCS explosive clads through recurrent neural network

K. Kumararaja, Bir Bahadur Sherpa, S. Saravanan

Welding International 2025年1月2日査読有り
Interface behavior and mechanical properties of explosively welded aluminum alloys and cast irons

Bir Bahadur Sherpa, Yusuke Izumi, Daisuke Inao, Shigeru Tanaka, Kazuyuki Hokamoto

Materials Today Communications 2025年1月査読有り筆頭著者責任著者
Advancements in explosive welding process for bimetallic material joining: A review

Bir Bahadur Sherpa, Reetu Rani

Journal of Alloys and Metallurgical Systems 2024年6月査読有り筆頭著者責任著者
Explosive Welding of Aluminum and Cast Iron for Potential Transportation and Structural Applications

Bir Bahadur Sherpa, Minghong Yu, Daisuke Inao, Shigeru Tanaka, Kazuyuki Hokamoto

Advanced Engineering Materials 2024年1月査読有り筆頭著者
Investigation of interfacial microstructure and mechanical characteristics of Ti/SS316 clads fabricated by explosive welding process

Bir Bahadur Sherpa, Masatoshi Kuroda, Tomohiro Ikeda, Koji Kawamura, Daisuke Inao, Shigeru Tanaka, Kazuyuki Hokamoto

The International Journal of Advanced Manufacturing Technology 128(3-4) 1403-1418 2023年7月26日査読有り筆頭著者
Explosive Welding Process to Clad Materials with Dissimilar Metallurgical Properties

Bir Bahadur Sherpa, Reetu Rani

Material Flow Analysis 25-38 2021年9月29日筆頭著者責任著者
Effect of explosive welding parameters on Al/LCS interface cladded by low velocity of detonation explosive welding (LVEW) process

Bir Bahadur Sherpa

The International Journal of Advanced Manufacturing Technology 113 3303-3317 2021年4月2日査読有り筆頭著者責任著者
Experimental and theoretical study of dynamic bend angle in the explosive welding process

Bir Bahadur Sherpa, Pal Dinesh Kumar, Abhishek Upadhyay, Sandeep Kumar, Arun Agarwal, Sachin Tyagi

Transactions of the Indian Institute of Metals 74 511-519 2021年2月21日査読有り筆頭著者責任著者
Low Velocity of Detonation Explosive Welding (LVEW) Process for Metal Joining

Bir Bahadur Sherpa, Pal Dinesh Kumar, Abhishek Upadhyay, Sandeep Kumar, Arun Agarwal, Sachin Tyagi

Propellants, Explosives, Pyrotechnics 45 1554-1565 2020年7月31日査読有り筆頭著者
Neuro-Fuzzy Technique for Micro-hardness Evaluation of Explosive Welded Joints

Bir Bahadur Sherpa, Pal Dinesh Kumar, Abhishek Upadhyay, Sandeep Kumar, Sachin Tyagi

Transactions of the Indian Institute of Metals 73(5) 1287-1299 2020年5月6日査読有り筆頭著者責任著者
Explosive Welding of Al-MS Plates and its Interface Characterization

Bir Bahadur Sherpa, Pal Dinesh Kumar, Abhishek Upadhyay, Sandeep Kumar, Arun Agarwal, Sachin Tyagi

Explosion Shock Waves and High Strain Rate Phenomena 13 128-133 2019年8月20日筆頭著者責任著者
Phased Array-Based Ultrasonic Testing of Explosively Welded Aluminium and Stainless Steel Plates

Abhishek Upadhyay, Bir Bahadur Sherpa, Sandeep Kumar, Pal Dinesh Kumar, Niraj Srivastava, Arun Agarwal

Transactions of the Indian Institute of Metals, Abhishek Upadhyay and Bir Bahadur Sherpa contributed equally to this work. 72 1521-1525 2019年査読有り筆頭著者
Numerical Simulation of Explosive Welded Steel with Aluminum Using Autodyn 2D

Suraj Srivastava, Bir Bahadur Sherpa, Gurjeet Singh, PJ Singh, Abhishek Upadhyay, Niraj Srivastava

International Research Journal of Engineering and Technology (IRJET) Volume: 04 Issue: 05 May -2017. 1378-1382 2017年5月5日
Examination of Joint Integrity in parallel plate configuration of explosive welded SS-Al combination

Bir Bahadur Sherpa, Abhishek Upadhyay, Sandeep Kumar, Vikash Mangla, Pal Dinesh Kumar, Arun Agarwal

Materials Today: Proceedings 1260-1267 2017年筆頭著者責任著者
Investigation on the Use of PETN Based Sheet Explosive in Hardening and Welding

Pal Dinesh Kumar, Shallu Gupta, Bir Bahadur, Sandeep Kumar, Arun Agarwal

1724-1733 2016年5月

もっとみる

講演・口頭発表等

Joining of aluminium and cast iron through explosive welding process

B. B. Sherpa, S. Tanaka, K. Hokamoto

International Symposium on Advances in Materials Joining and Manufacturing Processes, Karnataka, India 2025年2月27日招待有り
Experimental study of joining pure titanium and stainless steel using explosive welding process

B. B. Sherpa, M. Kuroda, T. Ikeda, K. Kawamura, D. Inao, S. Tanaka, K. Hokamoto

Seventh International Symposium on Explosion, Shock wave and High-strain-rate Phenomena (ESHP-2023), Maribor, Slovenia, (Oral Presentation) 2023年9月6日
Explosive welding of copper-aluminum using coated ammonium nitrate and fuel-oil

A. Upadhyay, B. B. Sherpa, S. Kumar, P. D. Kumar, A. Aggarwal

12th International High Energy Materials Conference & Exhibits, HEMCE-2019, IIT Madras, Chennai, India 2019年12月16日
Interface study of explosive welded Al-Steel joint using ultrasonic phased array technique

B. B. Sherpa, S. Kumar, A. Upadhyay, P. D. Kumar, A. Agarwal, S. Tyagi

31st International Ballistic symposium (IBS-2019), Hyderabad, India. (Oral Presentation) 2019年11月5日
Explosive welding of Al-MS plates and its interface characterization

B. B. Sherpa, P. D. Kumar, A. Upadhyay, S. Kumar, A. Agarwal, S. Tyagi

6th International Symposium on Explosion, Shock wave and High-strain-rate Phenomena (ESHP-2019), Puducherry, India. (Oral Presentation). 2019年3月20日
Non destructive evaluation of explosive welded joints of steel-aluminum combination

A. Upadhyay, S. Kumar, V. Mangla, B. B. Sherpa, P. D. Kumar, A. Agarwal

Third National Conference (INAC-03), Mohali, India 2017年10月
Investigation on the use of PETN based sheet explosive in hardening and welding

P. D. Kumar, S. Gupta, B. B. Sherpa, S. Kumar, A. Agarwal

29th International Symposium on Ballistics, Edinburgh, Scotland, UK. 2016年5月
Study of the explosive welding and applications

B. B. Sherpa, P. D. Kumar, U. Batra, A. Upadhyay, A. Agarwal

International conference on Innovative trends in applied physical chemical mathematical sciences and emerging energy technology for sustainable development” (APCMET-2014), New Delhi, India, (Oral Presentation) 2014年4月19日

SHERPA B. B.

基本情報

研究キーワード

研究分野

経歴

学歴

受賞

論文

講演・口頭発表等

メニュー

共著者の一覧