Tinh Quoc Bui

J-GLOBAL         Last updated: Jul 17, 2019 at 12:34
 
Avatar
Name
Tinh Quoc Bui
URL
https://sites.google.com/site/tinhqbui/
Affiliation
Tokyo Institute of Technology
Section
Computational Mechanics
Job title
Associate Professor
Degree
Dr. techn.(Vienna University of Technology)
ORCID ID
H-6752-2014

Research Areas

 
 
  • Computational science / Computational science / Computational Mechanics, Fracture Mechanics, Continuum damage, Computational Engineering, Computational Inelasticity, Structures, Finite Element Analysis, Numerical methods in Engineering, Porous media, Composite Materials, Computational Intelligence

Academic & Professional Experience

 
2018
 - 
Today
Subject Editor, Applied Mathematical Modelling, Elsevier
 
2018
 - 
Today
Editor, Thin-Walled Structures, Elsevier
 
2018
 - 
Today
Editorial Board Member, SN Applied Sciences, Springer
 
Dec 2016
 - 
Today
Associate Professor, Department of Civil and Environmental Engineering, Tokyo Institute of Technology
 
2016
 - 
Today
Editor, MATERIALS journal, mdpi
 
2002
 - 
Today
Lecturer, Faculty of Mathematics and Computer Science, VNU-University of Natural Science
 
Aug 2018
 - 
Aug 2018
Visiting Associate Professor, National Taiwan University of Science and Technology
 
May 2016
 - 
Nov 2016
JSPS Postdoctoral Fellowship (Pathway), Department of Civil and Environmental Engineering, Tokyo Institute of Technology
 
Apr 2014
 - 
Apr 2016
JSPS Postdoctoral Fellowship (Standard), Department of Mechanical and Environmental Informatics, Tokyo Institute of Technology
 
2010
 - 
Dec 2014
Postdoctoral Reseacher, Department of Civil Engineering, University of Siegen
 
2009
 - 
2010
Postdoctoral Reseacher, Structures and Materials Sciences Center, Ecole Nationale Superieure des Mines de Saint-Etienne
 
2005
 - 
2009
Research Associate, Institute of Lightweight Design and Structural Biomechanics, Vienna University of Technology
 

Education

 
2006
 - 
2009
Dr. techn. (PhD), Institute of Lightweight Design and Structural Biomechanics (ILSB), Vienna University of Technology
 
2003
 - 
2005
European Master in Mechanics of Construction, Faculty of Applied Sciences, University of Liège
 
1997
 - 
2002
BSc, Faculty of Mathematics and Computer Science, VNU-University of Natural Science
 
1996
 - 
1998
BSc (dropped out), HCMC Univerisy of Economics
 

Committee Memberships

 
2017
 - 
Today
The Japan Society for Computational Engineering & Science (JSCES)  member
 
2017
 - 
Today
The Japan Association in Computational Mechanics (JACM)  member
 
2002
 - 
Today
Vietnam Mechanics Association  member
 
 
 - 
Today
Research Grants Council (RGC) – Hong Kong  (Grant Assessor)
 
 
 - 
Today
The National Science Centre – Poland  (Grant Assessor)
 
 
 - 
Today
• Chilean National Science and Technology Commission (CONICYT-Chile)  (Grant Assessor)
 
 
 - 
Today
National Foundation for Science and Technology Development – NAFOSTED, Vietnam  (Grant Assessor)
 
2010
 - 
2013
German Association for Computational Mechanics - GACM  (member)
 

Awards & Honors

 
2018
The 2018 JACM Award for Young Investigator in Computational Mechanics, The Japan Association in Computational Mechanics (JACM)
 
Apr 2016
JSPS Postdoctoral Pathway Fellowship, Japan Society for the Promotion of Science - 日本学術振興会
 
Apr 2014
JSPS Postdoctoral Standard Fellowship, Japan Society for the Promotion of Science - 日本学術振興会
 
2013
Visiting Grant, City University of Hong Kong
 
Mar 2010
Postdoctoral Fellowship, University of Siegen, Germany
 
2009
Postdoctoral Research Fellowship, Ecole des Mines de Saint-Etienne, France
 
2006
Full Ph.D scholarship (declined), University of Exeter, UK
 
2006
Full Ph.D scholarship, Vienna University of Technology
 
2003
Visiting scholarship, CUD organization, Belgium
 

Published Papers

 
Role of interfacial transition zone in phase field modeling of fracture in layered heterogeneous structures
Nguyen TT, D. Waldmann, Tinh Quoc Bui
Journal of Computational Physics   386 585-610   2019   [Refereed]
Computational chemo-thermo-mechanical coupling phase-field model for complex fracture induced by early-age shrinkage and hydration heat in cement-based materials
Nguyen TT, D. Waldmann, Tinh Quoc Bui
Computer Methods in Applied Mechanics and Engineering   348 1-28   May 2019   [Refereed]
Three-dimensional elastoplastic solids simulation by an effective IGA based on Bézier extraction of NURBS
Tiantang Yu, Wenjiang Lai, Tinh Quoc Bui
International Journal of Mechanics and Materials in Design   15 175-197   2019   [Refereed]
Buckling of stomatopod-dactyl-club-inspired functional gradient plates: A numerical study
Peng Liu, Huigao Duan, Le Van Lich, Tuo Ye, Tinh Quoc Bui
Composite Structures   207 801-815   2019   [Refereed]
Thermal-mechanical crack propagation in orthotropic composite materials by the extended four-node consecutive-interpolation element (XCQ4)
MN Nguyen, NT Nguyen, TT Truong, Tinh Quoc Bui
Engineering Fracture Mechanics   206 89-113   2019   [Refereed]
Shape optimization of structures with cutouts by an efficient approach based on XIGA and chaotic particle swarm optimization
Chao Wang, Tiantang Yu, Guojian Shao, Tung-Thanh Nguyen, Tinh Quoc Bui
European Journal of Mechanics-A/Solids   74 176-187   2019   [Refereed]
A computational approach based on ordinary state-based peridynamics with new transition bond for dynamic fracture analysis
Michiya Imachi, Satoyuki Tanaka, Tinh Quoc Bui, Selda Oterkus, Erkan Oterkus
Engineering Fracture Mechanics   206 359-374   2019   [Refereed]
Efficient Analysis of Dynamic Fracture Mechanics in Various Media by a Novel Meshfree Approach
A Aghahosseini, A Khosravifard, Tinh Quoc Bui
Theoretical and Applied Fracture Mechanics   99 161-176   2019   [Refereed]
Size and surface effects on mechanical behavior of thin nanoplates incorporating microstructures using isogeometric analysis
Shuo Liu, Tiantang Yu, Le Van Lich, Shuohui Yin,Tinh Quoc Bui
Computers & Structures   212 173-187   2019   [Refereed]
Adaptive chaotic particle swarm algorithm for isogeometric multi-objective size optimization of FG plates
Chao Wang, Tiantang Yu, Jose L Curiel-Sosa, Nenggang Xie, Tinh Quoc Bui
Structural and Multidisciplinary Optimization   60 757-778   2019   [Refereed]
Finite element simulation of damage in fiber metal laminates under high velocity impact by projectiles with different shapes
Qian Zhu, Chao Zhang, Jose L Curiel-Sosa, Tinh Quoc Bui, Xiaojing Xu
Composite Structures   214 73-2182   2019   [Refereed]
A polygonal XFEM with new numerical integration for linear elastic fracture mechanics
Hai Dong Huynh, Minh Ngoc Nguyen, Gianluca Cusatis, Satoyuki Tanaka, Tinh Quoc Bui
Engineering Fracture Mechanics   213 241-263   2019   [Refereed]
Fracture modeling with the adaptive XIGA based on locally refined B-splines
Jiming Gu, Tiantang Yu, Le Van Lich, Thanh-Tung Nguyen, Yin Yang, Tinh Quoc Bui
Computer Methods in Applied Mechanics and Engineering   354 527-567   2019   [Refereed]
Deterministic Switching of Polarization Vortices in Compositionally Graded Ferroelectrics Using a Mechanical Field
Le Van Lich, Tinh Quoc Bui, Takahiro Shimada, Takayuki Kitamura, Trong-Giang Nguyen, Van-Hai Dinh
Physical Review Applied   11(5) 054001   2019   [Refereed]
Smoothing gradient damage model with evolving anisotropic nonlocal interactions tailored to low-order finite elements
Nguyen HAT, Tinh Quoc Bui, Sohichi Hirose
Computer Methods in Applied Mechanics and Engineering   328 498-541   Jan 2018   [Refereed]
Modified empirical formulas for predicting the thickness of RC panels under impact loading
Duc-Kien Thai, Seung-Eock Kim, Tinh Quoc Bui
Construction and Building Materials   169 261-275   2018   [Refereed]
Numerical buckling analysis for flat and cylindrical shells including through crack employing effective reproducing kernel meshfree modeling
M Ozdemir, S Tanaka, S Sadamoto, TT Yu, Tinh Quoc Bui
Engineering Analysis with Boundary Elements   97 55-66   2018   [Refereed]
A new multiscale phase field method to simulate failure in composites
RU Patil, BK Mishra, IV Singh, Tinh Quoc Bui
Advances in Engineering Software   126 9-33   2018   [Refereed]
Application of 6-DOFs meshfree modeling to linear buckling analysis of stiffened plates with curvilinear surfaces
M Ozdemir, S Sadamoto, S Tanaka, S Okazawa, TT Yu, Tinh Quoc Bui
Acta Mechanica   229 4995-5012   2018   [Refereed]
Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading
Chao Zhang, JL Curiel-Sosa, Tinh Quoc Bui
Composite Structures   201 62-71   2018   [Refereed]
Meso-Scale Finite Element Simulations of 3D Braided Textile Composites: Effects of Force Loading Modes
Chao Zhang, Chunjian Mao, Jose L Curiel-Sosa, Tinh Quoc Bui
Applied Composite Materials   25 823-841   2018   [Refereed]
Multi-inclusions modeling by adaptive XIGA based on LR B-splines and multiple level sets
Jiming Gu, Tiantang Yu, Le Van Lich, Thanh-Tung Nguyen, Satoyuki Tanaka, Tinh Quoc Bui
Finite Elements in Analysis and Design   148 48-66   2018   [Refereed]
Numerical and experimental validation of a particle Galerkin method for metal grinding simulation
CT Wu, Tinh Quoc Bui, Youcai Wu, Tzui-Liang Luo, Morris Wang, Chien-Chih Liao, Pei-Yin Chen, Yu-Sheng Lai
Computational Mechanics   61 365-383   2018   [Refereed]
Analysis of transient dynamic fracture parameters of cracked functionally graded composites by improved meshfree methods
Tinh Quoc Bui, Nha Thanh Nguyen, Le Van Lich, Minh Ngoc Nguyen, Thien Tich Truong
Theoretical and Applied Fracture Mechanics   96 642-657   2018   [Refereed]
Adaptive multi-patch isogeometric analysis based on locally refined B-splines
Jiming Gu, Tiantang Yu, Le Van Lich, Thanh-Tung Nguyen, Tinh Quoc Bui
Computer Methods in Applied Mechanics and Engineering   339 704-738   2018   [Refereed]
Numerical simulation of 2-D weak and strong discontinuities by a novel approach based on XFEM with local mesh refinement
TT Yu, Tinh Quoc Bui
Computers & Structures   196 112-133   2018   [Refereed]
Switching the chirality of a ferroelectric vortex in designed nanostructures by a homogeneous electric field
Le Van Lich, Takahiro Shimada, Jie Wang, Van-Hai Dinh, Tinh Quoc Bui, and Takayuki Kitamura
Physical Review B   96(13) 134119   Oct 2017   [Refereed]
An effective computational approach based on XFEM and a novel three-step detection algorithm for multiple complex flaw clusters
Chunping Ma, Tiantang Yu, Le Van Lich, Tinh Quoc Bui
Computers & Structures   193 207-225   2017   [Refereed]
Buckling analysis of stiffened plate structures by an improved meshfree flat shell formulation
Sadamoto S, Tanaka S, Taniguchi K, Ozdemir M, Tinh Quoc Bui, Murakami C, Yanagihara D
Thin-Walled Structures   117 303-313   2017   [Refereed]
Numerical analysis of 3-D solids and composite structures by an enhanced 8-node hexahedral element
Nguyen NM, Tinh Quoc Bui, Truong TT, Tanaka S, Hirose S
Finite Elements in Analysis and Design   131 1-16   2017   [Refereed]
A new cohesive crack tip symplectic analytical singular element involving plastic zone length for fatigue crack growth prediction under variable amplitude cyclic loading
X Hu, Tinh Quoc Bui, Wang J, Yao W, Ton THL, Singh IV, Tanaka S
European Journal of Mechanics - A/Solids   65 79-90   2017   [Refereed]
Dynamic stationary crack analysis of isotropic solids and anisotropic composites by enhanced local enriched consecutive-interpolation elements
Z. Kang, Tinh Quoc Bui, S. Hirose
Composite Structures   180 221-233   2017   [Refereed]
A rate-dependent hybrid phase field model for dynamic crack propagation
Doan DH, Tinh Quoc Bui, Do VT, Nguyen DD
Journal of Applied Physics   122(11) 115102   2017   [Refereed]
Simulation of dynamic and static thermoelastic fracture problems by extended nodal gradient finite elements
Minh Ngoc Nguyen, Tinh Quoc Bui, Nha Thanh Nguyen, Thien Tich Truong, Le Van Lich
International Journal of Mechanical Sciences   134 370-386   2017   [Refereed]
Quasi-static crack propagation simulation by an enhanced nodal gradient finite element with different enrichments
Kang Z, Tinh Quoc Bui, Saitoh T, Hirose S
Theoretical and Applied Fracture Mechanics   87 61-77   2017   [Refereed]
An effective meshfree reproducing kernel method for buckling analysis of cylindrical shells with and without cutouts
S. Sadamoto, M. Ozdemir, S. Tanaka, K. Taniguchi, T.T. Yu, Tinh Quoc Bui
Computational Mechanics   59 919-932   2017   [Refereed]
Comparison of periodic mesh and free mesh on the mechanical properties prediction of 3D braided composites
Chao Zhang, Jose Luis Curiel-Sosa, Tinh Quoc Bui
Composite Structures   159 667-676   2017   [Refereed]
Transient dynamic fracture analysis by an extended meshfree method with different crack-tip enrichments
Nguyen TN, Tinh Quoc Bui, Truong TT
Meccanica   52 2363-2390   2017   [Refereed]
A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites
Chao Zhang, JL Curiel-Sosa, Tinh Quoc Bui
Composite Structures   163 32-43   2017   [Refereed]
3-D local mesh refinement XFEM with variable-node hexahedron elements for extraction of stress intensity factors of straight and curved planar cracks
Wang Z, Yu TT, Tinh Quoc Bui, S. Tanaka, Ch Zhang, Sohichi Hirose, Curiel-Sosa LJ
Computer Methods in Applied Mechanics and Engineering   313 375-405   2017   [Refereed]
Numerical studies of an array of equidistant semi-permeable inclined cracks in 2-D piezoelectric strip using distributed dislocation method
Kuldeep Sharma, Tinh Quoc Bui, R. R. Bhargava, Tiantang Yu, Jun Lei, Sohichi Hirose
International Journal of Solids and Structures   80 137-145   2016   [Refereed]
Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system
Peng Liu, Deju Zhu, Yiming Yao, JunWen Wang, Tinh Quoc Bui
Materials and Design   99 201-210   2016   [Refereed]
Analysis of 2-Dimensional Transient Problems for Linear Elastic and Piezoelectric Structures using the Consecutive-Interpolation Quadrilateral Element (CQ4)
Tinh Quoc Bui, Du Dinh Nguyen, Xiaodong Zhang, Sohichi Hirose, Romesh C. Batra
European Journal of Mechanics - A/Solids   58 112-130   2016   [Refereed]
Enhanced nodal gradient 3D consecutive-interpolation tetrahedral element (CTH4) for heat transfer analysis
Minh Ngoc Nguyen, Tinh Quoc Bui, Thien Tich Truong, Ngoc Anh Trinh, Indra Vir Singh, Tiantang Yu, Duc Hong Doan
International Journal of Heat and Mass Transfer   103 14-27   2016   [Refereed]
J-integral evaluation for 2D mixed-mode crack problems employing a meshfree stabilized conforming nodal integration method
S. Tanaka, H. Suzuki, S. Sadamoto, S. Sannomaru, T.T. Yu,, Tinh Quoc Bui
Computational Mechanics   58 185-198   2016   [Refereed]
Hybrid Phase Field Simulation of Dynamic Crack Propagation in Functionally Graded Glass-Filled Epoxy
Doan HD, Tinh Quoc Bui, Nguyen DD, K. Fushinobu
Composites Part B: Engineering   99 266-276   2016   [Refereed]
Extended Isogeometric Analysis for Dynamic Fracture in Multiphase Piezoelectric/Piezomagnetic Composites
Tinh Quoc Bui, Sohichi Hirose, Ch. Zhang, Timon Rabczuk, CT Wu, Takahiro Saitoh, Jue Lei
Mechanics of Materials   97 135-163   2016   [Refereed]
On the high temperature mechanical behaviors analysis of heated functionally graded plates using FEM and a new third-order shear deformation plate theory
Tinh Quoc Bui, et all
Composites Part B: Engineering   92 218-241   2016   [Refereed]
An extended consecutive-interpolation quadrilateral element (XCQ4) applied to linear elastic fracture mechanics
Z. Kang, Tinh Quoc Bui, Nguyen DD, T. Saitoh, S. Hirose
Acta Mechanica   266 3991-4015   2015   [Refereed]
A fictitious crack XFEM with two new solution algorithms for cohesive crack growth modeling in concrete structures
XD Zhang, Tinh Quoc Bui
Engineering Computations   32 473-497   2015   [Refereed]
Interfacial dynamic impermeable cracks analysis in dissimilar piezoelectric materials under coupled electromechanical loading with the extended finite element method
TT Yu, Tinh Quoc Bui, P. Liu, Ch. Zhang, Sohichi Hirose
International Journal of Solids and Structures   67 205-218   2015   [Refereed]
Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS
Tinh Quoc Bui
Computer Methods in Applied Mechanics and Engineering   295 470-509   2015   [Refereed]
Comparison of several BEM-based approaches in evaluating crack-tip field intensity factors in piezoelectric materials
Jun Lei, Hongyan Wang, Chuanzeng Zhang, Tinh Quoc Bui, Felipe Garcia-Sanchez
International Journal of Fracture   189 111-120   2014   [Refereed]
A consecutive-interpolation quadrilateral element (CQ4): Formulation and applications
Tinh Quoc Bui, Vo QD, Ch. Zhang, Nguyen DD
Finite Elements in Analysis and Design   84 14-31   2014   [Refereed]
Numerical modeling of wave propagation in functionally graded materials using time-domain spectral Chebyshev elements
Saeid Hedayatrasa, Tinh Quoc Bui, Chuanzeng Zhang, Chee Wah Lim
Journal of Computational Physics   258 381-404   2014   [Refereed]
Isogeometric analysis for unsaturated flow problems
Nguyen NM, Tinh Quoc Bui, TT Yu, S. Hirose
Computers and Geotechnics   62 257-267   2014   [Refereed]
Transient thermal shock fracture analysis of functionally graded piezoelectric materials by the extended finite element method
P. Liu, TT Yu, Tinh Quoc Bui, Ch. Zhang, Y Xu, CW Lim
International Journal of Solids and Structures   51 2167-2182   2014   [Refereed]
Efficient evaluation of weakly/strongly singular domain integrals in the BEM using a singular nodal integration method
MR Hematiyan, A Khosravifard, Tinh Quoc Bui
Engineering Analysis with Boundary Elements   37 691-698   2013   [Refereed]
Transient dynamic crack analysis in non-homogeneous functionally graded piezoelectric materials by the X-FEM
P. Liu, TT Yu, Tinh Quoc Bui, Ch. Zhang
Computational Materials Science   69 542-558   2013   [Refereed]
Analysis of a subinterface crack in piezoelectric bimaterials with the extended finite element method
K. Sharma, Tinh Quoc Bui, Ch. Zhang, RR Bhargava
Engineering Fracture Mechanics   104 114-139   2013   [Refereed]
Analysis of generalized dynamic intensity factors of cracked magnetoelectroelastic solids by X-FEM
Tinh Quoc Bui, Ch. Zhang
Finite Elements in Analysis and DesignFi   69 19-36   2013   [Refereed]
Dynamic analysis of sandwich beams with functionally graded core using a truly meshfree radial point interpolation method
Tinh Quoc Bui, A. Khosravifard, Ch. Zhang, MR Hematiyan, MV Golub
Engineering Structures   47 90-104   2013   [Refereed]
Novel adaptive meshfree integration techniques in meshless methods
D Racz, Tinh Quoc Bui
International Journal for Numerical Methods in Engineering   90 1414-1434   2012   [Refereed]
Extended finite element simulation of stationary dynamic cracks in piezoelectric solids under impact loading
Tinh Quoc Bui, Ch. Zhang
Computational Materials Science   62 243-257   2012   [Refereed]
An efficient meshfree method for vibration analysis of laminated composite plates
Tinh Quoc Bui, Nguyen NM, Ch. Zhang
Computational Mechanics   õm8 175-193   2011   [Refereed]
A moving Kriging interpolation-based meshfree method for free vibration analysis of Kirchhoff plates
Tinh Quoc Bui, Nguyen NM
Computers & structures   89 380-394   2011   [Refereed]
An efficient meshfree method for analysis of two-dimensional piezoelectric structures
Tinh Quoc Bui, Nguyen NM, Ch. Zhang, Pham DAK
Smart Materials and Structures   20(6) 065016   2011   [Refereed]
Buckling analysis of Reissner–Mindlin plates subjected to in-plane edge loads using a shear-locking-free and meshfree method
Tinh Quoc Bui, Nguyen NM, Ch. Zhang
Engineering analysis with boundary elements   35 1038-1053   2011   [Refereed]
A moving Kriging interpolation-based element-free Galerkin method for structural dynamic analysis
Tinh Quoc Bui, Nguyen NM, Ch. Zhang
Computer Methods in Applied Mechanics and Engineering   200 1354-1366   2011   [Refereed]
Transient dynamic interface crack analysis in magnetoelectroelastic bi-materials by a time-domain BEM
Jun Lei, Chuanzeng Zhang, Tinh Quoc Bui
European Journal of Mechanics-A/Solids   49 146-157   2015   [Refereed]
Meso-Scale Finite Element Analysis of Mechanical Behavior of 3D Braided Composites Subjected to Biaxial Tension Loadings
Chao Zhang, Jose L Curiel-Sosa, Tinh Quoc Bui
Applied Composite Materials   26 139-157   2019   [Refereed]

Teaching Experience