Tsuyoshi Furushima

J-GLOBAL         Last updated: Mar 7, 2019 at 13:51
 
Avatar
Name
Tsuyoshi Furushima
Affiliation
The University of Tokyo
Section
Institute of Industrial Science
Research funding number
30444938

Research Interests

 
 

Research Areas

 
 

Awards & Honors

 
Nov 2017
The 8th International Conference on Tube Hydroforming (TUBEHYDRO2017), Outstanding Paper Award, TUBEHYDRO2017
 

Published Papers

 
Large reduction die-less mandrel drawing of magnesium alloy micro-tubes
T. Furushima, K. Manabe
CIRP Annals - Manufacturing Technology   67 309-312   2018   [Refereed]
Design of the laser dieless drawing process of tubes from magnesium alloy using FEM model
A. Milenin, P. Kustra, T. Furushima, P. Du, J. Němeček
Journal of Materials Processing Technology   262 65-74   2018   [Refereed]
Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine- Grained Pure Aluminum
T. Sakai R. Takahashi T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi
Proc. 8th Int. Conf. on Technology of Plasticity (ICTP2005)   CD-ROM   Oct 2005   [Refereed]
T. Sakai, T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi
JSME International Journal (Japan Society of Mechanical Engineers) Ser. A   49(2) 216-219   Apr 2006   [Refereed]
Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes
T. Furushima, K. Manabe
Proc. Advances in Materials and Processing Technologies 2006 (AMPT2006)   CD-ROM   Jul 2006   [Refereed]
Experimental Study On Multi-Pass Dieless awing Process of Superplastic Zn-22% Al Alloy Microtubes
T. Furushima, K. Manabe
Proc. 3rd Int. Conf. on Advanced Forming and Die Manufacturing Technology (AFDM2006)   CD-ROM   Sep 2006   [Refereed]
FURUSHIMA Tsuyoshi, MANABE Ken-ichi, SAKAI Takashi
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   47(548) 870-874   Sep 2006
Microtube is commonly used and required, particularly as micro components in micro-system technologies (MST) and micro electro-mechanical systems (MEMS). In this paper, fabrication process of microtube using superplastic dieless tube drawing is st...
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
大会講演概要   111 35-36   Oct 2006
日本塑性加工学会誌 (塑性と加工)
48(552) 51-55   Jan 2007   [Refereed]
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   48(552) 51-55   Jan 2007
FURUSHIMA Tsuyoshi, SHIMIZU Tetsuhide, MANABE Ken-ichi
塑性と加工 = JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY   48(556) 412-416   May 2007
T. Furushima, K. Manabe
Proc. 9th Int. Conf. on Numerical Methods in Industrial Forming Processes (NUMIFORM2007)   1603-1608   Jun 2007   [Refereed]
T. Furushima K. Manabe
Journal of Materials Processing Technology   187-188 236-240   Jun 2007   [Refereed]
T. Furushima, K. MANABE
Journal of Material Processing Technology   191 59-63   Aug 2007   [Refereed]
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
Journal of Japan Institute of Light Metals   57(8) 351-356   Aug 2007
Roughness Evolution on Free Surfaces of Micro Material with Strain Rate Sensitivity in Dieless Forming
Tsuyoshi Furushima
Proc. 2nd Int. Conf. on New Forming Technology (2nd ICNFT)   69-77   Sep 2007   [Refereed]
FE Mesoscopic Analysis of Roughness Evolution on Free Surface of Thin Sheet Metals with Strain Rate Sensitivity
T. Furushima, K. Manabe, S. Aleksandrov
Proc. Asian Workshop on Nano/Micro Forming Technology   13-14   Oct 2007   [Refereed]
FE Analysis of Size Effect on Deformation and Heat Transfer Behavior in Microtube Dieless Drawing
T. Furushima, K. Manabe
Proc. Advances in Materials and Processing Technologies 2007 (AMPT2007)   275-283   Oct 2007   [Refereed]
T. Furushima, K. Manabe, T. Sakai
Materials Transactions   49(6) 1365-1371   2008   [Refereed]
Influence of Parameters of Model for Material Grains on Development of Free Surface Roughness
E. Lyamina, T. Furushima
Proc. MIKMUS-2008   60-65   Apr 2008   [Refereed]
T. Furushima, K. Manabe
Journal of Materials Processing Technology   201(1-3) 123-127   May 2008   [Refereed]
Development of Free Surface Roughness in Expanding/Contracting Cylinders
S. Alexandrov, K. Manabe, T. Furushima
Proc. 9th Biennial ASME Conference on Engineering Systems Design and Analysis (ESDA 2008)   CD-ROM-ESDA2008-59138   Jul 2008   [Refereed]
Effect of Statistical Distribution of Grain Properties on Development of Free Surface Roughness
T. Furushima, K. Manabe, S. Alexsandrov
Proceedings of the XXXVI International Summer School, Advanced Problems in Mechanics Conference (APM 2008)   228-236   Jul 2008   [Refereed]
A Novel Processing for Microtubes -Superplasti Dieless Drawing Technique-
T. Furushima, K. Manabe
Advanced Technology Plasticity 2008 (Proc. The 9th International Conference on Technology of Plasticity) (ICTP 2008)   205-210   Sep 2008   [Refereed]
Effective Temperature Distribution and Drawing Speed Control for Stable Dieless Drawing Process of Metal Tubes
T. Furushima, S. Hirose, K. Manabe
Proc. 3rd JSME/ASME International Conference on Materials and Processing   CD-ROM-MSEC_ICMP2008-72377   Oct 2008   [Refereed]
T. Furushima, K. Nakata, K. Manabe, S. Alexandrov
Journal of Solid Mechanics and Materials Engineering   3(12) 1285-1296   2009   [Refereed]
T. Furushima, S. Hirose, K. Manabe
Journal of Solid Mechanics and Materials Engineering   3 236-246   2009   [Refereed]
FE Modeling of Free Surface Roughening in Sheet Metal Considering Mesoscopic Inhomogeneity Based on Hardness Distribution
T. Furushima, K. Nakata, K. Manabe, S. Alexandrov
Proc. 2nd Asian Symposium on Material & Processing (ASMP09)   CD-ROM   Jun 2009   [Refereed]
Experimental and Numerical Study on Dieless Drawing Process of Aluminum Alloy Extruded Tubes with Double Hollow Section
T. Furushima, K. Manabe
Proc. 4th International Conference on Tube Hydroforming (Tubehydro2009)   264-269   Sep 2009   [Refereed]
Effect of Drawing Speed on Deformation Behavior in Dieless Drawing of Metal Microtubes
T. Furushima, Y. Noda, K. Manabe
Proceedings of Asian Workshop on Nano/Micro Forming Technology 2009   640-643   Oct 2009
3D Finite Element Model Considering Microscopic Material Inhomogeneity for Prediction of Free Surface Roughening Under Tensile Deformation
Tsuyoshi Furushima
Proc. Asian Workshop on Nano/Micro Forming Technology-2009   628-631   Oct 2009
T. Furushima, T. Shimizu, K. Manabe
Materials Science Forum   654-656 735-738   2010   [Refereed]
T. Furushima, T. Masuda, K. Manabe
Key Engineering Materials   443 450-455   2010   [Refereed]
T. Furushima, Y. Noda, K. Manabe
Key Engineering Materials   443 699-704   2010   [Refereed]
Experimental and Numerical Study on Dieless Drawing Process of Aluminum Alloy Extruded Tubes with Double Hollow Section
T. Furushima, K. Manabe
Journal of the Chinese Society of Mechanical Engineers   31(2) 99-105   2010   [Refereed]
Fabrication of Small Taper-needles Using Dieless Drawing Process with Drawing Speed Control
T. Furushima, Y. Esaka, K. Manabe
Proc. the International Conference on Material Processing Technology 2010 (MAPT2010)   68-71   Jan 2010   [Refereed]
Laser Dieless Drawing Process for Metal Microtubes
T. Furushima, Y. Noda, K. Manabe
Proc. the International Conference on Material Processing Technology 2010 (MAPT2010)   64-67   Jan 2010   [Refereed]
S. Alexandrov, K. Manabe, T. Furushima
Journal of Manufacturing Science and Engineering (Transactions of the ASME)   133(1) 1-14503   Feb 2010   [Refereed]
A new empirical relation for the conventional measures of free surface roughness is proposed. Its geometric interpretation is a surface in three-dimensional space. A set of tests feasible for practical realization is discussed. Some available expe...
T. Furushima, T. Masuda, K. Manabe
Proc. the 9th Asia-Pacific Conference on Materials Processing (APCMP2010)   450-455   Jun 2010   [Refereed]
T. Furushima, Y. Noda, K. Manabe
Proc. the 9th Asia-Pacific Conference on Materials Processing (APCMP2010)   699-704   Jun 2010   [Refereed]
T. Furushima, T. Shimizu, K. Manabe
Proc. the 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM7)   735-738   Aug 2010   [Refereed]
A Theoretical-Experimental Approach for Improving the Predictive Capacity of Models for Free Surface Roughness Evolution in Metalforming Processes Under Plane Strain Conditions
S. Alexandrov, T. Furushima, K. Manabe
Proc. the 13th International Conference on Metal Forming (Metal forming2010)   1454-1457   Sep 2010   [Refereed]
Experimental Study on Effective Heating Conditions for High Speed Dieless Tube Drawing Process
T. Furushima, Y. Noda, K. Manabe
Proc. the 13th International Conference on Metal Forming (Metal forming2010)   502-505   Sep 2010   [Refereed]
Experimental Study on Effective Heating Conditions for High Speed Dieless Tube Drawing Process
T. Furushima, Y. Noda, K. Manabe
Steel research international   81(9) 502-505   Sep 2010   [Refereed]
A Theoretical-Experimental Approach for Improving the Predictive Capacity of Models for Free Surface Roughness Evolution in Metalforming Processes Under Plane Strain Conditions
S. Alexandrov, T. Furushima, K. Manabe
Steel research international   81(9) 1454-1457   Sep 2010   [Refereed]
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
塑性と加工   51(597) 990-992   Oct 2010
FE Simulation Considering Mesoscopic Material Inhomogenetiy For Prediction of Free Surface Roughening
T. Furushima, T. Masuda, K. Manabe
Proc. the 6th International Conoference on Micromanufacturing   549-552   Mar 2011   [Refereed]
S. Alexandrov, T. Furushima, K. Manabe
Archive of Applied Mechanics   81(12) 1935-1952   Mar 2011   [Refereed]
FURUSHIMA Tsuyoshi, SHIRASAKI Atsushi, MANABE Ken-ichi
塑性と加工   52(602) 380-384   Mar 2011
Shape Control Technique for Various Forming Conditions in Dieless Tube Forming
S. Supriadi, T. Furushima, K. Manabe
Proc. International Conference on Material Processing Technology 2011   157-161   Jun 2011   [Refereed]
Development of Precision Profile Control System with Fuzzy Model and Correction Function for Tube Dieless Drawing
S. Supriadi, T. Furushima, K. Manabe
Proc. the JSME/ASME 2011 International Conference on Materials and Processing (ICM&P2011)   ICMP2011-51023   Jun 2011   [Refereed]
Prediction of Free Surface Roughening by 2D and 3D FE Model Considering Material Inhomogeneity
T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
Proc. the JSME/ASME 2011 International Conference on Materials and Processing (ICM&P2011)   ICMP2011-51123   Jun 2011   [Refereed]
T. Furushima, K. Manabe
Superplastic Forming of Advanced Metallic Materials: Methods and Applications   327-360   Jun 2011
This chapter describes a novel manufacturing process of micro-tubes utilizing a dieless drawing technique. The chapter first discusses the principle of a dieless drawing process for micro-tubes of superplastic and conventional materials. To achiev...
Analysis of Micro Cross Wedge Rolling of Metals
H. Lu, D. Wei, Z. Jiang, K. Manabe, T. Furushima
Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011)   187-190   Jul 2011   [Refereed]
Real-time Process Control System of Dieless Tube Drawing with An Image Processing Approach
S. Supriadi, T. Furushima, K. Manabe
Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011)   92-95   Jul 2011   [Refereed]
Fabrication of Metal Bellows Using Semi-Dieless Compression Technique
T. Furushima, N. Q. Hung, K. Manabe, O. Sasaki
Proc. The 5th International Conference on Tube hydroforming (TUBEHYDRO2011)   116-120   Jul 2011   [Refereed]
S. Alexandrov, K. Manabe, T. Furushima
Prof. The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET2011)   1167-1174   Aug 2011   [Refereed]
Study on Size Effect in Micro Cross Wedge Rolling
H.N. Lu, D.B. Wei, Z.Y. Jiang, K. Manabe, T. Furushima
Steel research International   82(Special edition) 962-967   Sep 2011   [Refereed]
A Novel Dieless Bellows Forming Process Using Local Heating Technique
S. Supriadi, N. Q. Hung, T. Furushima, O. Sasaki, K. Manabe
Steel research International   82(Special edition) 950-955   Sep 2011   [Refereed]
Deformation and Heat Transfer Analysis of Dieless Drawing Process for Metal Tube
T. Furushima, T. Ikeda, Y. Noda, K. Manabe
Steel research International   82(Special edition) 302-307   Sep 2011   [Refereed]
S. Supriadi, T. Furushima, K. Manabe
Journal of Solid Mechanics and Materials Engineering   5(12) 1059-1070   Dec 2011   [Refereed]
T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
Journal of Solid Mechanics and Materials Engineering   5(12) 978-990   Dec 2011   [Refereed]
H. N. Lu, D. B. Wei, Z. Y. Jiang, K. Manabe, T. Furushima
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   962-967   Dec 2011
This paper introduces a novel microforming process - Micro Cross Wedge Rolling (MCWR) that is very promising in the field of microforming. Numerical simulation has been conducted to Investigate the size effect and dimension accuracy in MCWR. A fin...
S. Supriadi, N. Q. Hung, T. Furushima, O. Sasaki, K. Manabe
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   950-955   Dec 2011
In this work, we present a finite element analysis and experimental study of the metal bellows manufacturing using dieless forming technique. Currently metal bellows Is fabricated by using tube hydro or air-pressure forming followed by upsetting p...
T. Furushima, T. Ikeda, Y. Noda, Y. Noda, K. Manabe
Special Edition: 10th International Conference on Technology of Plasticity, ICTP 2011   302-307   Dec 2011
A dieless drawing process with local heating and tensile deformation for metal wires, bars and tubes Is a flexible metal drawing technique without using any dies Instead of a conventional die drawing process. In this study, a simple method combine...
Fracture Prediction in Micro Sheet Forming Using Ductile Fracture Criterion
T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov
Steel Research International   Special Edition 1183-1186   2012   [Refereed]
Workability of AZ31 Magnesium Alloy Tubes in Dieless Drawing Process
T. Furushima, K. Manabe
Steel Research International   Special Edition 851-854   2012   [Refereed]
Deformation Behavior in Micro Sheet Hydroforming Process
H. Sato, T. Furushima, D. Wei, N. Mathew, Z. Jiang
Steel Research International   Special Edition 651-654   2012   [Refereed]
S. Supriadi, T. Furushima, K. Manabe
Materials Transactions   53(5) 862-869   2012   [Refereed]
T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
Advanced Materials Research   418-420 1040-1043   2012   [Refereed]
T. Furushima, T. Ikeda, K. Manabe
Advanced Materials Research   418-420 1036-1039   2012   [Refereed]
T. Furushima, H. Tsunezaki, T. Nakayama, K. Manabe, S. Alexandrov
Key Engineering Materials   554-557 169-173   2013   [Refereed]
Z.C. Zhang, K. Manabe, T. Furushima, K. Tada
Advanced Materials Research   652-654 1956-1960   2013   [Refereed]
T. Furushima, H.Q. Hung, K. Manabe, O. Sasaki
Journal of Materials Processing Technology   213 1406-1411   Aug 2013   [Refereed]
Z.C. Zhang, K. Manabe, T. Furushima, K. Tada
Advanced Materials Research   887-888 907-911   2014   [Refereed]
T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov
International Journal of Machine Tools and Manufacture   76 34-48   Jan 2014   [Refereed]
T. Furushima, A. Shirasaki, K. Manabe
Journal of Materials Processing Technology   214 29-35   Jan 2014   [Refereed]
Z.C. Zhang, K. Manabe, T. Furushima, K. Tada, O. Sasaki
Advanced Materials Research   936 1742-1746   Jun 2014   [Refereed]
The metal bellows are used in a large number of industrial applications for their flexile and elastic properties. For the traditional manufacturing methods for metal bellows, the dies and (or) tools are required. It is inconvenient to change the s...
T. Furushima, Y. Imagawa, S. Furusawa, K. Manabe
Procedia Engineering   81 700-705   Oct 2014   [Refereed]
H. Xie, K. Manabe, T. Furushima, K. Tada, Z. Jiang
Procedia Engineering   81 179-184   Oct 2014   [Refereed]
T. Furushima, Y. Imagawa, S. Furusawa, K. Manabe
Key Engineering Materials   626 372-376   2015   [Refereed]
Z.C. Zhang, T. Furushima, K. Manabe, K. Tada, O. Sasaki
Proceedings of the Institution of Mechanical Engineers   229(4) 664-669   2015   [Refereed]
T. Furushima, Y. Imagawa, K. Manabe, T. Sakai
Journal of Materials Processing Technology   223 186-192   Mar 2015   [Refereed]
A Numerical Study of Micro Hydro Deep Drawing of SUS304 Sheets
L. Luo, Z. Jiang, D. Wei, H. Sato, T. Furushima, K. Manabe
Applied Mechanics and Materials   846 524-529   2016   [Refereed]
Liang Luo, Zhengyi Jiang, Dongbin Wei, Dongbin Wei, Ken Ichi Manabe, Xianming Zhao, Di Wu, Tsuyoshi Furushima
Finite Elements in Analysis and Design   111 46-55   Apr 2016
© 2015 Elsevier B.V. All rights reserved.Surface roughness, compared with tiny sizes of micro products, can be relatively large and has significant influences on micro forming processes and products' quality. In this study, a voronoi finite elemen...
Piotr Kustra, Andrij Milenin, Bartłomiej Płonka, Tsuyoshi Furushima
Journal of Materials Engineering and Performance   25(6) 2535   Jun 2016
© 2016, ASM International.Development of technological production process of biocompatible magnesium tubes for medical applications is the subject of the present paper. The technology consists of two stages—extrusion and dieless drawing process, r...
H. B. Xie, H. B. Xie, K. Manabe, T. Furushima, K. Tada, Z. Y. Jiang
International Journal of Material Forming   9(3) 405-412   Jul 2016
© 2015, Springer-Verlag France.The demand for miniaturized parts and miniaturized semi-finished products is increasing nowadays, because microforming processes can improve production rate and minimize material waste due to less forming passes. How...
T. Furushima, K. Manabe
CIRP Annals - Manufacturing Technology   66 265-268   2017   [Refereed]
Identification of an Empirical Equation for Predicting Free Surface Roughness Evolution in Thin Sheets of Aluminum Alloy and Pure Copper
T. Furushima, H. Sato, K. Manabe, S. Alexandrov
Journal of Manufacturing Science and Engineering   140    2018   [Refereed]
A new constitutive analysis of hexagonal close-packed metal in equal channel angular pressing by crystal plasticity finite element method
H. Li, A. Öchsner, P. K.D.V. Yarlagadda, Y. Xiao, T. Furushima, D. Wei, Z. Jiang, K. Manabe
Continuum Mechanics and Thermodynamics   30 69-82   2018   [Refereed]

Misc

 
SAKAI Takashi, TAKAHASHI Ryosuke, FURUSHIMA Tsuyoshi, MORIMOTO Hideo
講演論文集   2005(43) 89-90   Feb 2005
SAKAI Takashi, TAKAHASHI Ryosuke, FURUSHIMA Tsuyoshi, KOYAMA Jun-ichi
軽金属   56(12) 728-729   Dec 2006
FURUSHIMA Tsuyoshi, NODA Yuta, MANABE Ken-ichi
Materials and processing conference   2009(17) "123-1"-"123-2"   Nov 2009
Dieless drawing is a flexible metal drawing technique accompanied by continuous necking using local heating and tensile load without any dies. It is difficult for this technique to realize high speed drawing, because the local heating cannot be ac...
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
塑性と加工   50(586) 981-985   Nov 2009
FURUSHIMA Tsuyoshi
Materia Japan   49(1) 13-16   Jan 2010
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
塑性と加工   51(591) 308-312   Apr 2010
FURUSHIMA Tsuyoshi
塑性と加工   52(611) 1308-1309   Dec 2011
FURUSHIMA Tsuyoshi, YANG Ming
塑性と加工   53(613) 116-117   Feb 2012
Nano/Micro Processing Committee
Journal of the JSTP   54(631) 724-728   Aug 2013
古島 剛, 張 自成, 真鍋 健一
素形材   55(11) 28-33   Nov 2014
Tsuyoshi Furushima, Yusuke Imagawa, Shusaku Furusawa, Ken Ichi Manabe
Key Engineering Materials   626 372-376   Jan 2015
We develop new drawing technologies of rotary laser dieless drawing for the fabrication of micro-tubes without the need for tools such as dies, plugs and mandrels. A rotary laser dieless drawing apparatus with local heating using a laser irradiate...
Tsuyoshi Furushima, Yutaro Hirose, Kazuo Tada, Ken Ichi Manabe
Materials Science Forum   838-839 597-602   Jan 2016
© 2016 Trans Tech Publications, Switzerland.A novel superplastic dieless drawing technique with local heating and tensile deformation has been focused on fabrication of zirconia ceramic tube. In this study, 3Y-TZP zirconia ceramic tube with outer ...

Books etc

 
1) Superplastic forming of advanced metallic materials Methods and applications
Tsuyoshi Furushima (Part:Joint Work)
Woodhead Publishing   Jun 2011   

Conference Activities & Talks

 
Microstructural Evolution and Mechanical Properties of ZM21 Tubes Fabricated by Dieless Drawing Technology at 350℃
Peihua Du, Shusaku Furusawa,Tsuyoshi Furushima
The 5th Asian Symposium on Materials and Processing (ASMP2018)   Dec 2018   
ひずみ誘起自由表面あれ進展挙動の共焦点レーザ顕微鏡下その場観察装置の開発
古島 剛,廣瀬 雄太郎
日本銅学会第58回講演大会   Nov 2018   
Microstructural evolution and mechanical properties of dieless drawn ZM21 magnesium alloy tubes
P. Du, 古澤周作,古島剛
第69回塑性加工連合講演会   Oct 2018   
Finite Element Analysis on Deformation Behavior in Micro Tube Hydroforming Process
Z. Zhang, T. Furushima, K. Manabe
平成30年度塑性加工春季講演会   May 2018   
多結晶金属板の結晶組織解析および自由表面あれ挙動の可視化
Tsuyoshi Furushima
佐々木完太,Yannis P. Korkolis, 古島剛   May 2018   
レーザスペックルパターンを応用したデジタル画像相関法による塑性ひずみ分布の完全非接触計測と可視化
古島剛,増和尚輝
平成30年度塑性加工春季講演会   May 2018   
Uniaxial Tensile Properties of AZ31 Magnesium Alloy Foils under High Power Pulsed Current Assistance
I. Indhiarto, 清水徹英,古島剛,楊明
平成30年度塑性加工春季講演会   May 2018   
Laser assisted dieless drawing of ZM21 magnesium alloy tubes
P. Du, 古澤周作,古島剛
平成30年度塑性加工春季講演会   May 2018   
Improvement of Microstructure and Mechanical Properties of Brass Tube with CRB process
Z. Zhang, T. Furushima
平成30年度塑性加工春季講演会   May 2018   
Computer aided design of the laser dieless drawing process of tubes from magnesium alloy with take into account ductility of the material
A. Milenin, P. Kustra, P. Du, S. Furusawa, T. Furushima
Metal Forming2018   2018   
Effect of DC pulsed-current on deformation behavior of magnesium alloy thin sheets
I. Indhiarto, T. Shimizu, T. Furushima, M. Yang
Metal Forming2018   2018   
Deformation behavior of metal foil in micro pneumatic deep drawing process
Z. Zhang, N. Chen, T. Furushima, B. Li
Metal Forming2018   2018   
Fracture and surface roughening behaviors in micro metal forming
T. Furushima, H. Tsunezaki, Y. Hirose
Metal Forming2018   2018   
Deformation-induced surface roughening of an Al-Mg alloy
P. Knysh1, K. Sasaki, T. Furushima, M. Knezevic, Y.P. Korkolis
11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018)   2018   
Development of In-situ Observation Methods of Surface Roughening Behavior By Hand-size Stretching Test for Metal Foils
T. Furushima, Y. Hirose
11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes(NUMISHEET2018)   2018   
Investigation of deformation-induced surface roughening based on microstructure analysis in polycrystalline metal sheets
Kanta SASAKI, Yannis P. Korkolis, Koji Kakehi, Tsuyoshi FURUSHIMA
The 10th Asian Workshop on Micro/Nano Forming Technology (AWMFT2017)   2017   
Development of Compact Marchiniak Testing Apparatus for In-situ Microscopic Observation of Surface Roughening
T. Furushima, Y. Hirose, K. Tada, K. Manabe
The 12th International Conference on Technology of Plasticity (ICTP2017)   2017   
Deformation Behavior and Microstructure Evolution of TRIP Seamless Steel Tube in Hydraulic Bulge Process
Z. Zhang, Y. Xu, T. Furushima, X. Kong, K. Manabe
the 8th International Conference on Tube Hydroforming (TUBEHYDRO2017)   2017   
Development of Rotary Laser Dieless Forming Apparatus for Micro Metal Bellows
T. Furushima
the 8th International Conference on Tube Hydroforming (TUBEHYDRO2017)   2017   
Tsuyoshi Furushima, Ken Ichi Manabe
Materials Science Forum   1 Jan 2016   
© 2016 Trans Tech Publications, Switzerland.A heat assisted superplastic dieless drawing process that requires no dies or tools is applied to the drawing of a Zn-22Al and β titanium superplastic alloy for not only circular but also noncircular mic...
Haibo Xie, Haibo Xie, Ken ichi Manabe, Tsuyoshi Furushima, Kazuo Tada, Zhengyi Jiang
International Journal of Advanced Manufacturing Technology   1 Jan 2016   
© 2015, Springer-Verlag London.Physical parameters, such as microscopic and roughness, play important roles in microforming process due to an increasing ratio of surface to volume of the deformed material. The study on lubrication characterisation...
On the Scale Dependence of Micro Hydromechanical Deep Drawing
H. Sato , K. Manabe, T. Furushima, D. Wei, Z. Jiang, S. Alexandrov
13th Asia-Pacific Symposium on Engineering Plasticity and Its Application (AEPA2016)   2016   
Spring-in Behavior of Crystalline CFRTP Sheet after Thermal U-bending
K. Matsushita, T. Furushima, K. Tada, K. Manabe
Advances in Materials and Processing Technologies (AMPT2016)   2016   
Novel Non-Contact Evaluation of Strain Distribution Using Digital Image Correlation with Laser Speckle Pattern of Low Carbon Steel Sheet
N. Mashiwa, T. Furushima, K. Manabe
Advances in Materials and Processing Technologies (AMPT2016)   2016   
Zicheng Zhang, Zicheng Zhang, Tsuyoshi Furushima, Ken Ichi Manabe, Kazuo Tada, Osamu Sasaki
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture   1 Apr 2015   
© 2015 Institution of Mechanical Engineers.In the traditional manufacture methods of metal bellows, such as tube bulging and hydroforming, the dies and tools are generally used. In these methods, it is very inconvenient to change the shapes of bel...
FURUSHIMA Tsuyoshi, FURUSAWA Shusaku, MANABE Ken-ichi
日本機械学会関東支部総会講演会講演論文集   20 Mar 2015   
Effects of surface profile smoothing in laser multi-pass dieless drawing process are studied experimentally to fabricate microtube of stainless steel. In the experiment, material is SUS304 tube with outer diameter of φ500μm and thickness of 130μm....
FURUSHIMA Tsuyoshi, TAKAHASHI Kenta, MANABE Ken-ichi
日本機械学会関東支部総会講演会講演論文集   20 Mar 2015   
In this study, the effect of material inhomogeneity on micro deep drawability for metal foils with thickness of 20μm is investigated by establishing FE model considering material inhomogeneity. As a result of FE analyses with homogeneous and inhom...
真鍋 健一, 張 自成, 古島 剛
銅と銅合金 : 銅及び銅合金技術研究会誌 = Copper and copper alloy : journal of Japan Research Institute for Advanced Copper-Base Materials and Technologies   2015   
Development of Small Marciniak Testing Apparatus for In-situ Observation of Surface Roughening and Fracture Behaviors
T. Furushima, Y. Hirose, K. Tada, K. Manabe
the 8th Asian Workshop on Nano/Micro Forming Technology (AWMFT2015)   2015   
Development of Laser Dieless Torsion Drawing Apparatus for Metal Microtubes
T. Furushima, Y. Imagawa, T. Sakai, K. Manabe
the 8th Asian Workshop on Nano/Micro Forming Technology (AWMFT2015)   2015   
Development of Laser Assisted Dieless Forming Apparatus for Fabrication of Micro Metal Bellows
T. Furushima, R. Kitamura, K. Manabe
the 7th International Conference on Tube Hydroforming (TUBEHYDRO2015)   2015   
Development of Superplastic Dieless Drawing Apparatus for 3Y-TZP Zirconia Ceramic Tube
T. Furushima, Y. Hirose, K. Tada, K. Manabe
12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015   2015   
Heat Assisted Dieless Drawing Process of Superplastic Metal Microtubes - From Zn22Al to β Titanium Alloys
T. Furushima, K. Manabe
12th International Conference on Superplasticity in Advanced Materials (ICSAM) 2015   2015   
Manabu Ono, Kota Yamagishi, Mamoru Shimazaki, Makoto Sakamoto, Tsuyoshi Furushima, Kenichi Manabe, Tetsumaro Hiroi
Proceedings - ASPE 2014 Annual Meeting   1 Jan 2014   
T. Furushima, K. Manabe, S. Alexandrov
11th International Conference of Computational Methods in Science and Engineering (ICCMSE2014)   1 Jan 2014   
© 2014 AIP Publishing LLC.In this study, a mesoscopical inhomogeneous finite element method (MIFEM) of metal forming process is performed to predict surface roughening behavior. The mesoscopical inhomogeneous material parameter and its determinati...
YAMAGISHI Kota, FURUSHIMA Tsuyoshi, MANABE Kenichi, HIROI Tetsumaro, SAKAMOTO Makoto, ONO Manabu
講演論文集   2014   
Experimental study on anisotropy of free surface roughening behavior for metal sheets in uni-axial tensile test
T. Furushima, T. Masuda, K. Manabe, S. Alexandrov
the JSME/ASME 2014 International Conference on Materials and Processing (ICMP2014)   2014   
The study on deformation characterization in micro rolling for ultra-thin strip
H.B. Xie, K. Manabe, T. Furushima, Z.Y. Jiang
NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes   2014   
Size effects on free surface roughening and necking behavior of metal thin sheets using inhomogeneous finite element material model
T. Furushima, K. Manabe, S. Alexandrov
NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes   2014   
FURUSHIMA Tsuyoshi, IMAGAWA Yusuke, MANABE Ken-ichi
Materials and processing conference   8 Nov 2013   
古島 剛, 中山 友子, 真鍋 健一
機械材料・材料加工技術講演会 M&P   8 Nov 2013   
FURUSHIMA Tsuyoshi, NAKAYAMA Tomoko, MANABE Kenichi, ALEXANDROV Sergei, JIANG Zhengyi, LU Haina, WEI Donbing
Materials and processing conference   8 Nov 2013   
For prediction of surface roughening behavior, an inhomogeneous finite element (FE) simulation of micro deep drawing is conducted Grain shape is modeled by cubic and voronoi tessellationi in the FE model Materials used are pure copper foils with t...
古島 剛, 今川 裕介, 真鍋 健一
機械材料・材料加工技術講演会 M&P   8 Nov 2013   
Sugeng Supriadi, Sugeng Supriadi, Tsuyoshi Furushima, Kenichi Manabe
Advanced Materials Research   29 Oct 2013   
Dieless bellows forming using local heating technique is an advanced flexible forming technology to produce bellows from straight tube without the use of dies. The deformation is induced by applying continuous compression, and local heating. Advan...
FURUSHIMA Tsuyoshi, FURUSAWA Shusaku, TSUSHIMA Kei, IMAGAWA Yusuke, MANABE Ken-ichi
日本機械学会関東支部総会講演会講演論文集   14 Mar 2013   
Fabrication of stainless steel microtubes by multi-pass dieless drawing process is studied experimentally. Materials used in this experiment are SUS304 tubes with outer diameter of 500μm and thickness of 130, 100and 25μm. Effect of heating tempera...
FURUSHIMA Tsuyoshi, TSUNEZAKI Hitomi, NAKAYAMA Tomoko, MANABE Ken-ichi, ALEXANDROV Sergei
日本機械学会関東支部総会講演会講演論文集   14 Mar 2013   
Metal foils indicates low level fracture strain compared with sheet metal. In this study, the free surface roughening is focused on to clarify the mechanism of ductile fracture for metal foils, since the ratio of surface roughness to thickness bec...
Coupled experimental analysis of deformation characterization of thin strip in micro rolling mill
H. Xie, K. Manabe, T. Furushima, K. Tada
the 6th Asian Workshop on Nano/Micro Forming Technology (AWMFT2013)   2013   
Experimental and Numerical Study on Surface Roughening Behavior in Micro Deep Drawing
T. Furushima, T. Nakayama, K. Manabe, S. Alexandrov, Z. Jiang, H. Lu, D. Wei
the 6th Asian Workshop on Nano/Micro Forming Technology (AWMFT2013)   2013   
Study on Mesoscopical Inhomogeneous Material Modeling for Surface Roughening Behavior of Polycrystalline Metal Sheets and Foils
T. Furushima, K. Manabe, S. Alexandrov
the 13th International Conference on QIR (Quality in Research)   2013   
Development of Dieless Bellows Forming Process with Local Heating Technique
Z.Zhang, T. Furushima, K. Manabe, K. Tada, O. Sasaki
the 6th International Conference on Tube Hydroforming   2013   
FURUSHIMA Tsuyoshi, TSUNEZAKI Hitomi, MANABE Ken-ichi, Alexandrov Sergei
Materials and processing conference   30 Nov 2012   
Micro metal forming with metal foils is one of the promising approaches to fabricate micro parts. The deformation behavior of metal foils differs from that of sheet metals due to size effect. In this research, the objective is to elucidate the fra...
古島 剛, 恒﨑 仁美, 真鍋 健一
機械材料・材料加工技術講演会 M&P   30 Nov 2012   
FURUSHIMA Tsuyoshi, IMAGAWA Yusuke, FURUSAWA Shusaku, MANABE Ken-ichi, SAKAI Takashi
Materials and processing conference   30 Nov 2012   
Microtube is commonly used and required. Dieless drawing is fabrication process of microtube. However, in the dieless drawing process, oxidation occurs on tube surface because of local heating and it reduces reduction in area. In this study, metho...
FURUSHIMA Tsuyoshi, NAKAYAMA Tomoko, MANABE Ken-ichi, ALEXANDROV Sergei
Materials and processing conference   30 Nov 2012   
Micro metal forming with metal foils is one of the promising approaches to fabricate micro parts. In this study, a finite element (FE) model for metal foil considering material inhomogeneity due to different flow stresses for each crystal grain to...
古島 剛, 今川 裕介, 古澤 周作
機械材料・材料加工技術講演会 M&P   30 Nov 2012   
SAKAMOTO Makoto, ONO Manabu, KURATA Shugo, FURUSHIMA Tsuyoshi, HIROI Tetsumaro, MANABE Kenichi
ロボティクス・メカトロニクス講演会講演概要集   27 May 2012   
Many of pipes that supply indispensable water, gas and electricity for our life are laid underground. A regular inspection is necessary for these pipes. In the penetration inspection to which the inspection is done without digging up piping, the i...
KUMISAWA Itaru, SAKAI Takashi, FURUSHIMA Tsuyoshi
学術講演会講演論文集   25 May 2012   
FURUSHIMA Tsuyoshi, HUNG Nguyen Quang, MANABE Ken-ichi, SASAKI Osamu
塑性と加工   25 Mar 2012   
Development of Cyclic Rotating Bending Apparatus for Microstructure Control of Metal Tubes
Z. Zhang, K. Manabe, K. Takahashi, T. Furushima, K. Tada
2012   
Free Surface Roughening and Ductile Fracture of Metal Foils in Micro Metal Forming
T. Furushima, H. Tsunezaki, K. Manabe, S. Alexandrov
the 3rd Asian Symposium on Materials & Processing (ASMP 2012)   2012   
Material Inhomogeneity Modeling for Micro Metal Forming [Invited]
Tsuyoshi Furushima
The 2nd International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2011)   Dec 2011   
Sergei Alexandrov, Ken Ichi Manabe, Tsuyoshi Furushima
AIP Conference Proceedings   19 Sep 2011   
The paper presents the first step of research aimed at determining the specific form of a new empirical equation for free surface roughness evolution. In contrast to conventional empirical equations for free surface roughness evolution, the new eq...
Effect of Process Parameter on Tapered Profile in Fuzzy Control Dieless Tube Drawing
S. Supriadi, K. Manabe, T. Furushima
2011   
FURUSHIMA Tsuyoshi, MASUDA Tetsuro, MANABE Ken-ichi
Materials and processing conference   27 Nov 2010   
FURUSHIMA Tsuyoshi, IKEDA Takuma, MANABE Ken-ichi
Materials and processing conference   27 Nov 2010   
Dimensional accuracy enhancement of dieless drawing by fuzzy control
S. Supriadi, 古島 剛, 真鍋 健一
2010   
Sergei Alexandrov, Ken Ichi Manabe, Tsuyoshi Furushima
2008 Proceedings of the 9th Biennial Conference on Engineering Systems Design and Analysis   21 Sep 2009   
Microforming is a modem technology for fabricating very small metallic parts, such as micro-tubes, required in many sectors of industry. Free surface roughness of such components is a very important parameter since the roughness can be considered ...
T. Furushima, K. Manabe
9th International Conference on Technology of Plasticity, ICTP 2008   1 Jan 2008   
A novel processing for fabrication of microtubes using superplastic dieless drawing is studied experimentally and numerically. The superplastic material used in this experiment is a Zn-22%Al alloy tube with an outer diameter of 2mm and wall thickn...
Effect of Microscopical Inhomogeneity of Material on Macroscopic Deformation Behavior
T. Furushima, K. Manabe, S. Alxsandrov
2008   
Tsuyoshi Furushima, Ken Ichi Manabe
AIP Conference Proceedings   3 Aug 2007   
Dieless drawing process was applied to small-size non-circular tubes. Deformation behavior of cross section of the fabricated tubes was investigated using finite element (FE) simulation. The FE simulation with coupled thermomechanical analysis usi...
Experimental and Numerical Study on Deformation Behavior in Dieless Drawing Process of Superplastic Microtubes
T. Furushima, K. Manabe
Advances in Materials and Processing Technologies 2006 (AMPT2006)   2006   
T. Furushima, H. Tsunezaki, K. Manabe, M. Yang, S. Alexandrov
13th International Conference on Fracture (ICF13)   1 Jan 2013   
The metal foils indicate low level fracture strain compared with metal sheet. In this study, the free surface roughening is focused on to clarify the mechanism of ductile fracture for metal foils, since the ratio of surface roughness to thickness ...
Real-time Monitoring System for Dieless Bellows Forming using Machine Vision
S. Supriadi, T. Furushima, K. Manabe
the 13th International Conference on QIR (Quality in Research)   2013   
Convolution Formation Behavior of Semi-dieless Bellows Forming Process for Metal Tubes
T. Furushima, Y. Suzuki, K.Manabe, O. Sasaki
the 6th International Conference on Tube Hydroforming   2013   
Micro Laser Dieless Drawing Process of Copper Alloy Tubes
T. Furushima, Y. Noda, K. Manabe
4th Asian Workshop on Nano/Micro Forming Technology (AWMFT2011)   2011   
FURUSHIMA Tsuyoshi, MANABE Ken-ichi
日本機械学会関東支部総会講演会講演論文集   17 Mar 2005   
In this paper, fabrication process of microtube using superplastic dieless tube drawing is studied experimentally. Superplastic material used is Al-78Zn (SPZ) alloy tube with outer diameter of 2mm and wall thickness of 0.5mm. A high-frequency indu...
Surface Roughness and Microstructure of Superplastic Microtubes in Dieless Drawing Process
T. Furushima, K. Manabe
2005   
Finite Element Modeling of Dieless Tube Drawing of Strain Rate Sensitive Material with Coupled Thermo-Mechanical Analysis
T. Furushima, T. Sakai, K. Manabe
Proc. 8th Int. Conf. on Numerical Methods in Industrial Forming Processes (NUMIFORM2004)   Jun 2004   
Crystallographic Orientation Observation and Mechanical Properties Evaluation of Fine Grained Pure Aluminum
T. Sakai, T. Furushima, K. Manabe, H. Morimoto, E. Nakamachi
Proc. 2nd Int. Sympo. on Ultrafine Grained Structure (ISUGS2 03)   Nov 2003   
FURUSHIMA Tsuyoshi, SAKAI Takashi, MANABE Ken-ichi, MORIMOTO Hideo, NAKAMACHI Eiji
大会講演概要   20 Apr 2003   

Research Grants & Projects

 
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(基盤研究(B))
Project Year: 2006 - 2008    Investigator(s): 真鍋 健一
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(若手研究(B))
Project Year: 2007 - 2008    Investigator(s): Tsuyoshi FURUSHIMA
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(若手研究(B))
Project Year: 2010 - 2011    Investigator(s): Tsuyoshi FURUSHIMA
The purposes of this study are development of evaluating micro plastic characteristic by micro indentation and establishment of precise analysis on metal forming. As an evaluation method of micro plastic characteristic, the micro indentation tests...
Ministry of Education, Culture, Sports, Science and Technology: Grants-in-Aid for Scientific Research(挑戦的萌芽研究)
Project Year: 2011 - 2012    Investigator(s): Kenichi MANABE
As a novel grain refinement and microstructure control method, a cyclic rotating bending processing (CRB) method for metal tubes is proposed and investigated in the present study. The principle is on the basis of the severe straining mechanism of ...