PROCEEDINGS OF THE 2017 SIXTEENTH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017 921-925 2017 [Refereed]
PROCEEDINGS OF THE SIXTEENTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS ITHERM 2017 198-201 2017 [Refereed]
Heat Transfer Performance of Uni-directional Porous Heat Sink for Cooling of Next Generation On-vehicle Inverter
2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP) 185-187 2017 [Refereed]
Immersion Cooling Technology of SiC-based On-vehicle Inverter by Anti-freezing Liquid with Subcooled Boiling
2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP) 199-201 2017 [Refereed]
Cooling Augmentation of Subcooled Boiling Liquid by a Nano-particle Coated Surface
2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP) 206-209 2017 [Refereed]
Advanced cooling technology via boiling heat transfer considering the wettability of a heating surface
2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP) 202-205 2017 [Refereed]
The Proceedings of Mechanical Engineering Congress, Japan 2017
<p>This paper describes the evaluation of relationship between thermal contact resistance and load with 3 types of TIM (Thermal Interface Materials), and the evaluation of performance of heat spreader. Experimental study was conducted for evaluati...
The Proceedings of Mechanical Engineering Congress, Japan 2017
<p>This paper evaluates boiling heat transfer performance on a lotus-type porous copper plate attached onto a grooved heat transfer surface. The experiments are conducted under atmospheric and saturated pool conditions. The lotus copper plate ha...
The Proceedings of the Thermal Engineering Conference 2016
<p>A next-generation electric vehicle requires a high-performance IC inverter with the thermal emission of more than 500 W/cm2 . To remove such a high heat emission, boiling heat transfer with microbubble emission boiling (MEB) is expec...
The Proceedings of the Thermal Engineering Conference 2016
<p>In this study, we evaluate the boiling and evaporation heat transfer performance of the uni-directional porous media that have been proposed as a heat removal device in the high heat flux environment. Uni-directional porous media have effects s...
The Proceedings of the Thermal Engineering Conference 2016
<p>In this study we used a phenolic resin substrate with a micro-pore size because of its high water permeability. We measured evaporation ratio for three cases (Pore diameters: 5, 25 micro-meter). A droplet is 5 micro-liter generated by a micro p...
