太田 正光

Analysis of fracturing process of wood and timber constructions by modified distinct element method.(jointly worked) 

Proc. Korean Soc. Wood Science & Technology Annual meeting, p.26-31, Seoul 26-31 2001年  

Comparisons of shear stress/shear strain relations of wood obtained by Iosipescu and torsion tests.(jointly worked) 

Wood and Fiber Sci. 33(2) 275-283 2001年  

Hardness distribution on wood surface.(jointly worked) 

J. Wood Sci. 47(1) 1-7 2001年  

┣DBMeasurement of the mode (]G0002[) fracture toughness of wood by end-notched flexure test.(/)-┫DB(jointly worked) 

┣DBJ. Wood Sci.(/)-┫DB 46(4) 273-278 2000年  

Estimation of the shear strength of wood by uniaxial-tension tests of off-axis specimens.(jointly worked) 

J. Wood Sci. 46(2) 159-163 2000年  

Vibrational properties of heat-treated green wood.(jointly worked) 

J. Wood Sci. 46(1) 63-67 2000年  

Bending strength and toughness of heat-treated wood.(jointly worked) 

J. Wood Sci. 46(1) 8-15 2000年  

Collapsing process simulations of Japanese frame construction model under dynamic loading.(jointly worked) 

Proc. Pacific Timber Engineering Conf., Forest Research Bulletin No.212 3(212) 303-308 1999年  

Fracturing process analyses of joint connections of Japanese frame constructions under different deformation rate.(jointly worked) 

Proc. Pacific Timber Engineering Conf., Forest Research Bulletin No.212 2(212) 84-91 1999年  

Variability of fracture toughness by the crack tip position in an annual ring of coniferous wood.(jointly worked) 

J. Wood Sci. 45(4) 275-283 1999年  

Shear strength of wood obtained by torsion test.(jointly worked) 

Bull. Tokyo Univ. For. 101 247-252 1999年  

Applicability of the Iosipescu shear test on the measurement of the shear properties of wood.(jointly worked) 

J. Wood Sci. 45(1) 24-29 1999年  

Vibrational properties of Sitka spruce heat-treated in nitrogen gas. (jointly worked) 

J. Wood Sci. 44 73-77 1998年  

Prediction of the buckling stress of intermediate wooden columns using the secant modulus. (jointly worked) 

J. Wood Sci. 44 69-72 1998年  

Simulation of the chip formation in the orthogonal wood cutting by the extended distinct element method.(jointly worked) 

Proceedings of the 13th International Wood Machining Seminar, p. 525-533, Vancouver, June 17-20 1997年  

Analysis of the shear stress/shear strain relationships in wood obtained by torsion tests.(jointly worked) 

Mokuzai Gakkaishi 43(6) 457-463 1997年  

Accuracy of the shear modulus of wood obtained by Timoshenko's theory of bending.(jointly worked) 

Mokuzai Gakkaishi 43(5) 439-443 1997年