We fabricated double interface-treated Josephson junctions with vertically-stacked geometry based on the high temperature superconductor YBCO. The junctions have a superconductor-insulator - superconductor-insulator-superconductor structure. If the intermediate layer is thin enough, the two junctions are coupled inductively through the intermediate layer, and the two junctions switch simultaneously. The double junctions with 30nm thick intermediate layer exhibited resistively-shunted-junction characteristics and had no kinks in their I-V curves. In a typical chip, an average of the critical current density was 1.65 kA/cm(2) with 1 sigma spread of 14.6%. The nominal IcRn product for a double junction was 2.43 mV with 1 sigma spread of 5.72 %. This IcRn product is 1.5-2 times larger than that of the single vertically-stacked junction having similar critical current density. These experimental results suggest the simultaneous switch of the two junctions. We expect that higher nominal IcRn products would be obtained after choosing appropriate process parameters, because the IcRn products of our previous single junctions have reached 2 mV.