MINOSHIMA Kohji

J-GLOBAL         Last updated: Aug 9, 2019 at 02:40
 
Avatar
Name
MINOSHIMA Kohji
Affiliation
Osaka University
Section
Graduate School of Engineering Department of Mechanical Engineering
Job title
Professor
Degree
Doctor of Engineering(Kyoto University)

Research Areas

 
 

Published Papers

 
Toshiyuki Kondo, Hiroyuki Inoue, Hiroyuki Hirakata and Kohji Minoshima
Journal of the Society of Materials Science, Japan   67(12) 1050-1057   Dec 2018   [Refereed]
Prediction of Residual Life of Low-cycle Fatigue in Austenitic Stainless Steel based on Indentation Test
Akio Yonezu, Yuya Touda, HakGui Kim, Keishi Yoneda, Masayuki Sakihara, Kohji Minoshima
Transactions of Japan Society of Mechanical Engineers, Series A   77(783) 1859-1870   Nov 2011   [Refereed]
Corrosion Fatigue Properties of High-Strength Cold-Rolled Eutectoid Steel in Deionized Water
Masanori Nakatani, Shinpei Arioka, Takuya Kawashima, Masayuki Sakihara, Akio Yonezu, and Kohji Minoshima
Journal of the Society of Materials Science, Japan   60(11) 1023-1030   Nov 2011   [Refereed]
Frictional Anisotropy of Oblique Nanocolumn Arrays Grown by Glancing Angle Deposition
Hiroyuki Hirakata, Taku Nishihira, Akio Yonezu, and Kohji Minoshima
Tribology Letters   44(2) 259-268   Nov 2011   [Refereed]
Interface Strength of Structured Nanocolums Grown by Glacing Angle Deposition
Hiroyuki Hirakata, Taku Nishihira, Akio Yonezu, and Kohji Minoshima
Engineering Fracture Mechanics   78(16) 2800-2808   Nov 2011   [Refereed]
Fatigue Crack Growth Acceleration caused by Irreversible Hydrogen Desorption in High-Strength Steel and Its Mechanical Condition
Masanori Nakatani, Hiroaki Fujiwara, Masayuki Sakihara and Kohji Minoshima
Materials Science and Engineering A   528(25-26) 7729-7738   Sep 2011   [Refereed]
Influence of Irreversible Hydrogen and Stress Cycle Frequency on the Fatigue Crack Growth Property in High-strength Steel and Hydrogen Visualization
M. Nakatani, H. Fujihara, M. Sakihara, and K. Minoshima
Procedia Engineering   10 2381-2386   Jun 2011   [Refereed]
Influence of Activation Energy and Sensitivity to Hydrogen Embrittlement on the Fatigue Strength Degradation by Irreversible Hydrogen in High Strength Steels
Masanori Nakatani and Kohji Minoshima
Fatigue & Fracture of Engineering Materials and Structures   34(5) 363-373   May 2011   [Refereed]
Realization of Freestanding Wrinkled Thin Films with Flexible Deformability
Tomohiro Maruyama, Hiroyuki Hirakata, Akio Yonezu, and Kohji Minoshima
Applied Physics Letters   98(4) 041908-1-041908-3   Jan 2011   [Refereed]
Fatigue Strength Degradation by Irreversible Hydrogen in Cold Drawn Eutectoid Steels
Masanori Nakatani and Kohji Minoshima
Key Engineering Materials   462-463 188-193   Jan 2011   [Refereed]
Fatigue Crack Growth Properties and Hydrogem Visualization under Irreversible Hydrogen Charged Condition in Cold Drawn High Strength Steel
M. Nakatani H. Fijihara, M. Sakihara, and K. Minoshima
Transactions of Japan Society of Mechanical Engineers, Series A   76(769) 1214-1220   Sep 2010   [Refereed]
Strength of Self-Organized TiO2 Nanotube Arrays
Hiroyuki Hirakata, Kenji Ito, Akio Yonezu, Hiroaki Tsuchiya, Shinji Fujimoto and Kohji Minoshima
Acta Materialia   58(15) 4956-4967   Sep 2010   [Refereed]
Estimation of Anisotropic Plastic Properties of Engineering Steels from Spherical Impressions
Keishi Yoneda, Akio Yonezu, Hiroyuki Hirakata and Kohji Minoshima
International Journal of Applied Mechanics   2(2) 355-379   Jun 2010   [Refereed]
Factors Affecting the Fatigue Strength Degradation by Irreversible Hydrogen in Cold Drawn Eutectoid Steels
M. Nakatani and K. Minoshima
Proceedings of the 8th International Conference on Fracture and Strength of Solids (FEOFS2010)      Jun 2010   [Refereed]
Evaluation of Incipient Plasticity from Interfaces between Ultra-Thin Gold Films and Compliant Substrates
H. Hirakata, H. Ogiwara, A. Yonezu and K. Minoshima
Thin Solid Films   518 5249-5256   May 2010   [Refereed]
Evaluation Method of Local Mechanical Properties using Micro Tensile Testing and Its Application to Cold-worked Materials
Kohji Minoshima, Keishi Yoneda, Akio Yonezu, Masayuki Sakihara, and Kouichi Kuroda
Transactions of Japan Society of Mechanical Engineers, Series A   76(764) 493-499   Apr 2010   [Refereed]
Hydrogen Effect on Fracture Toughness of Thin Film/Substrate Interfaces
H. Hirakata, T. Yamada, Y. Nobuhara, A. Yonezu and K. Minoshima
Engineering Fracture Mechanics   77(5) 803-818   Mar 2010   [Refereed]
Estimation of the Anisotropic Plastic Property using Single Spherical Indentation - An FEM Study
A. Yonezu, Y. Kuwahara, K. Yoneda, H. Hirakata and K. Minoshima
Computational Materials Science   47(2) 611-619   Dec 2009   [Refereed]
Evaluation of Susceptibility to Hydrogen Embrittlement Cracking in High Strength Steel using Indentation Test
A. Yonezu, M. Arino, T. Kondo, H. Hirakata and K. Minoshima
2009 ASME International Mechanical Engineering Congress & Exposition      Nov 2009
An Approach to Estimate In-plane Anisotropic Plastic Property using Spherical Indentation
A. Yonezu, K. Yoneda, H. Hirakata and K. Minoshima
2009 ASME International Mechanical Engineering Congress & Exposition      Nov 2009
Indentation Method to Extract Anisotropic Plastic Property
A. Yonezu, K. Yoneda, H. Hirakata and K. Minoshima
Proceedings of Asian Pacific Conference for Materials and Mechanics 2009   a91   Nov 2009   [Refereed]
Influence of Activation Energy for Irreversible Hydrogen Desorption on the Fatigue Strength Degradation in Cold Drawn Eutectoid Steels
M. Nakatani, M. Sakihara, and K. Minoshima
Proceedings of Asian Pacific Conference for Materials and Mechanics 2009   a119   Nov 2009   [Refereed]
Acoustic Emission from Hydrogen Embrittlement Cracking in Maraging Steel subjected to Contact Loading
A. Yonezu, M. Arino, T. Kondo, H. Hirakata and K. Minoshima
Proceedings of the 13th Asia-Pacific Conference on Non-Destructive Testing      Nov 2009   [Refereed]
Fatigue Crack Propagation of P/M Soft Magnetic Materials with High-Resistance Surface Layer
R. Tanegashima, T. Shirosaka, H. Akebono, M. Kato, A. Sugeta, and K. Minoshima
Journal of the Society of Materials Science, Japan   58(10) 853-859   Oct 2009   [Refereed]
The influence of Irreversible Hydrogen on the Fatigue Crack Initiation and Fatigue Crack Propagation in Cold Drawn High Strength Steels
M. Nakatani, M. Sakihara, and K. Minoshima
Proceedings of 12th International Conference on Fracture   No.T12.063   Jul 2009   [Refereed]
The Relationship between Fatigue Strength Degradation by Irreversible Hydrogen and Low Temperature Annealing in Cold Drawn High Strength Steels
Masanori Nakatani and Kohji Minoshima
75(750) 175-181   Feb 2009   [Refereed]
Influence of Irreversible Hydrogen on the Fatigue Crack Initiation Life in Cold Drawn High Strength Steel
Masanori Nakatani, Takashi Kato, Masayuki Sakihara, and Kohj Minoshima
Journal of the Society of Materials Science, Japan   57(11) 141-142   Nov 2008   [Refereed]
Influence of Irreversible Hydrogen on the Fatigue Strength in Cold Drawn High Strength Steel
Kohji Minoshima, Masahiro Nakatani, Atsushi Sugeta, and Masayui Sakihara
Journal of Solid Mechanics and Materials Engineering   2(11) 1436-1443   Nov 2008   [Refereed]
An Algorithm to Determine the Plastic Properties of Materials based on the Loading Data in Single Sharp Indentation
Akio Yonezu, Hiroyuki Hirakata, Kohji Minoshima
Fundamentals of Nanoindentation and Nanotribology IV, edited by E.L Bourhis, DJ Morris, L Michelle, OR Schwaiger and T Staedler), Materials Research Society Symposium Proceeding   1049 117-122   May 2008   [Refereed]
Relationship between Activation Energy of Hydrogen Trap Site and a Decrease in Fatigue Strength by Absorption of Irreversible Hydrogen in Cold-Drawn High-Strength Steels
M. Nakatani, K. Minoshima, and M. Sakihara
Transactions of Japan Society of Mechanical Engineers, Series A   74(740) 566-573   Apr 2008   [Refereed]
Bending Tests for Polysilicon Microelements with a Help of in situ SPM imaging
K. Tanaka, A. Takamori, T. Imoto, K. Minoshima, T. Katayama
Journal of Materials Science, Japan   56(10) 945-950   Oct 2007   [Refereed]
Young's Modulus of Polysilicon Thin Film Evaluated by Finite Element Analysis
K. Tanaka, K. Minoshima and T. Imoto
Key Engineering Materials   353-358 2227-2230   Jul 2007   [Refereed]
Evaluation of the Fiber Stress Distribution in Aramid/Epoxy Model Composite Using Micro-Raman Spectroscopy and FEM Analysis
K. Tanaka, K. Minoshima, and Y. Yamada
Journal of Solid Mechanics and Materials Engineering   1(3) 364-375   Apr 2007   [Refereed]
Influence of Internal Hydrogen on the Fatigue Behavior in Cold-Drawn High-Strength Stee
K. Minoshima, M. Nakatani, A. Sugeta, and M. Sakihara
Transactions of Japan Society of Mechanical Engineers   2007(1) 349-350   Jan 2007   [Refereed]
Measurement of the Fiber Stress Distribution during Pull-out Test by means of Micro-Raman Spectroscopy and FEM Analysis
K. Tanaka, K. Minoshima, and Y. Yamada
High Performance Structures and Materials, Vol. 85, pp. 131-139.      May 2006   [Refereed]
The Effect of Pre-Plastic Working on Fatigue Crack Growth Behavior in Ultra-Fine Grained P/M Aluminum Alloys
A. Sugeta, Y. Mukobara, and K. Minoshima
Transactions of Japan Society of Mechanical Engineers   72(716) 507-512   Apr 2006   [Refereed]
Evaluation of the Fiber Stress Distribution in Aramid/Epoxy Model Composite using Micro-Raman Spectroscopy and FEM Analysis
Kazuto Tanaka, Kohji Minoshima, and Hideo Yamada
Transactions of Japan Society of Mechanical Engineers   71(712) 1639-1645   Dec 2005   [Refereed]
Nanoscopic Fatigue and Stress Corrosion Crack Growth Behaviour in a High-Strength Stainless Steel Visualized In Situ by Atomic Force Microscopy
K. Minoshima, Y. Oie, and K. Komai
Fatigue & Fracture of Engineering Materials and Structures   28(11) 951-971   Nov 2005   [Refereed]
Estimation of Young's Modulus for Polysilicon Thin Film by Finite Element Analysis
Kazuto Tanaka, Kohji Minoshima, and Takehiro Imoto
Journal of the Society of Materials Science, Japan   54(10) 1016-1021   Oct 2005   [Refereed]
Evaluation of the Interfacial Properties in an Aramid Fiber/Epoxy Model Composite using Micro-Raman Spectroscopy
K. Tanaka, K. Minoshima, K. Kawano, and K. Komai
Proceedings of the 11th International Congress on Fracture, 2005-3, pp.1-6.      2005
Environmental Propagation of Aramid/Epoxy Interfacial Debonding under Fatigue Loading
K. Tanaka, K. Minoshima, Y. Araki and K. Komai
Third International Conference on Fatigue of Composites (ICFC3), 2004-9.      2004
Influence of Water Absorption on the Pull-out Behavior of Aramid/Epoxy Model Composite
K. Tanaka, K. Minoshima, W. Grela and K. Komai
Adcances in Experimetal Mechanics, 2004-9, pp. 1-8 (Paper Number OS05W0161).   pp. 1-8 Paper Number OS05W0161    Sep 2004
K. Tanaka, K. Minoshima, T. Ohya, and K. Komai
Composites Science and Technology   64(10-11) 1531-1537   Oct 2004   [Refereed]
Kazuto Tanaka, Kohji Minoshima, Daisuke Goshima, and Kenjiro Komai
Transactions of Japan Society of Mechanical Engineers   70(690) 250-257   Feb 2004   [Refereed]
Effects of Stress Waveform and Water Absorption on the Fatigue Strength of Angle-ply Aramid Fiber/Epoxy Composites
K. Komai, K. Minoshima, K. Tanaka, and T. Tokura
24(2&4) 339-348   Feb 2002   [Refereed]
K. Tanaka, K. Minoshima, W. Grela, and K. Komai
Composites Science and Technology   62(16) 2169-2177   2002   [Refereed]
K. Minoshima, K. Obara, N. Minamino, and K. Komai
Fatigue & Fracture of Engineering Materials and Structures   24(12) 803-816   Dec 2001   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Kazuo TANAKA, Hiroshi HOSEN
Trans. JSME, Series A   67(655) 574-579   Mar 2001   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Kohji MIYAZAWA
Journal of Materials Science, Japan   48(5) 495-500   May 1999   [Refereed]
Kohji Minoshima, Yoshihiro Maekawa, Tetsuya Yamada, and Kenjiro Komai
Trans. JSME, Series A   65(631) 454-460   Mar 1999   [Refereed]
Kenjiro Komai and K. Minoshima
Trans. JSME, Series A   65(631) 416-424   Mar 1999   [Refereed]
Kohji MINOSHIMA, Takatoshi KANO, Kenjiro KOMAI
Trans. JSME, Series A   64(628) 2964-2969   Dec 1998   [Refereed]
Fracture and Fatigue Behavior of Single Crystal Silicon Microelements and Nanoscopic AFM Damage Evaluation
K. Komai, K. Minoshima, and S. Inoue
Microsystem Technologies, Vol. 5, Issue 1, 1998-10, pp. 30-37      Oct 1998   [Refereed]
In Situ Observation of Stress Corrosion Cracking of High-Strength Aluminum Alloy by Scanning Atomic Force Microscopy and Influence of Vacuum
K. Komai, K. Minoshima, and T. Miyawaki
JSME International Journal, Series A   41(1) 49-56   Jan 1998   [Refereed]
Kohji Minoshima, Kazutaka Tsuru, and K. Komai
Transactions of Japan Society of Mechanical Engineers, Series A   63(614) 2142-2148   Oct 1997   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Kazuto TANAKA
Trans. JSME, Series A   63(610) 1198-1204   Jun 1997   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Takeshi MIYAWAKI
Trans. JSME, Series A   62(600) 1827-1833   Aug 1996   [Refereed]
箕島弘二, 佐藤重喜, 駒井謙治郎
Trans. JSME, Series A   62(601) 2001-2007   Jun 1996
Kenjiro KOMAI, Kohji MINOSHIMA, Shigemichi INOUE, Hidetoshi FUJII
Trans. JSME, Series A   62(596) 978-984   Apr 1996   [Refereed]
Kohji Minoshima, Michihiko Endo, Tsuyoshi Miyawaki, and Kenjiro Komai
Trans. JSME, Series A   61(587) 1587-1594   Jul 1995   [Refereed]
Kenjiro Komai, Kohji Minoshima, Takayuki Mishima
Trans. JSME, Series A   61(586) 1153-1159   Jun 1995   [Refereed]
Kohji Minoshima, Norimasa Yamasaki, Kenjiro Komai
Trans. JSME, Series A   60(579) 2518-2524   Nov 1994   [Refereed]
Fracture Behavior of SiC Whisker Reinforced Aluminum Alloy under Combined Tension/Torsion Loading at Room and Elevated Temperature
Kenjiro Komai, Kohji Minoshima, and Gentaro Yoshida
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 60, No. 579, 1994-11, pp.1080-1087. (in Japanese)   60(572) 1080-1087   Nov 1994   [Refereed]
Nanoscopic In Situ Visualization of Stress Corrosion Crack Growth by STM/AFM
Kenjiro Komai, Kohji Minoshima, and Masahiko Itoh
Journal of the Society of Materials Science, Japan, Vol. 43, No. 486, 1994-3, pp.336-342. (in Japanese)      Mar 1994   [Refereed]
In-Situ Nanoscopic Visualization of Localized Corrosion by Scanning Probe Microscopes
Kenjiro Komai, Kohji Minoshima, and Masahiko Itoh
Journal of the Society of Materials Science, Japan, Vol. 43, No. 486, 1994-3, pp.329-335. (in Japanese)      Mar 1994   [Refereed]
Kenjiro Komai, Kohji Minoshima, Hideo Tawara, Shigemichi Inoue, Katsuyoshi Sunako
Trans. JSME, Series A   60(569) 52-58   Jan 1994   [Refereed]
Kenjiro Komai, Kohji Minoshima, Shigeru Setoguchi
Trans. JSME, Series A   59(568) 2970-2976   Dec 1993   [Refereed]
In-Situ Visualization of Nanometer Sized Corrosion Damage by STM/AFM
K. Komai, K. Minoshima, and I. Itoh
Materials System, Vol. 12, 1993-11, pp. 5-14      Nov 1993   [Refereed]
Kenjiro Komai, Kohji Minoshima, and Tadaaki Ishikawa
Trans. JSME, Series A   59(566) 2278-2285   Oct 1993   [Refereed]
Kenjiro Komai, Kohji Minoshima, and Yasushi Sada
J. Materials Science, Japan   42(475) 391-397   Apr 1993   [Refereed]
Static and Fatigue Fracture Behavior of a Carbon Fiber Reinforced Epoxy Composite under Combined Tensile and Torsional Loading and Influence of Water Absorption
Kenjiro Komai, Kohji Minoshima, and Toyoji Miki
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 58, No. 550, 1992-6, pp.830-836. (in Japanese)   58(550) 830-836   Jun 1992   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Sadamu Kinoshita, Morihito NAKANO, Yoshihiko UEMATSU
J. Materials Science, Japan   58(546) 206-211   Feb 1992   [Refereed]
Recognition of Different Fracture Surface Morphologies Using Computer Image Processing Technique
Kenjiro Komai, Kohji Minoshima, Shoichi Ishii
Transactions of Japan Society of Mechanical Engineers, Series A,   57(542) 2595-2601   Oct 1991   [Refereed]
Kenjiro KOMAI, Kohji MINOSHIMA, Masahiro KOYAMA
Trans. JSME, Series A   57(533) 188-194   Jan 1991   [Refereed]
Development of OPS83-Based Diagnostic Expert System for SCC in Stainless Steel
Kenjiro Komai, Kohji Minoshima, and Masahiro Koyama
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 56, No. 530, 1990-10, pp.2197-2202. (in Japanese)      Oct 1990   [Refereed]
Quantitative Analysis of Three-Dimensional Images of Dimple and Stretch Zone
Kenjiro Komai, Kohji Minoshima, and Hiromitsu Morita
Journal of the Society of Materials Science, Japan   39(444) 1311-1316   Sep 1990   [Refereed]
Development of High-Speed Scanning Mapping System Based Upon Non-Contact Distance Survey by Laser
Kenjiro Komai, Kohji Minoshima, Hiroshi Ohki
Journal of Material Testing Research Association of Japan, Vol.35, No. 3, 1990-7, pp.158-164. (in Japanese)      Jul 1990   [Refereed]
Kohji MINOSHIMA, Tatsuo NAGASAKI, Kenjiro KOMAI
Trans. JSME, Series A   56(525) 1318-1323   May 1990   [Refereed]
Kenjiro Komai, Kohji Minoshima, Toyoshige Shibutani
Transactions of Japan Society of Mechanical Engineers, Series A   56(525) 1021-1029   May 1990   [Refereed]
Kohji MINOSHIMA, Sei OGAWA, Kenjiro KOMAI
J. Materials Science, Japan   39(439) 350-356   Apr 1990
Corrosion Fatigue Crack Growth Characteristics of Duplex Stainless Steel Weldment in Synthetic Seawater
Kenjiro Komai, Kohji Minoshima, Guisik Kim, and Katsuichi Irifune
Journal of the Society of Materials Science, Japan, Vol. 39, No. 439, 1990-4, pp.343-349. (in Japanese)      Apr 1990   [Refereed]
Fractography of Fatigue Damage by Acoustic Microscope and Interfacial Delamination Resistance of CFRP
Journal of the Society of Materials Science, Japan, Vol. 39, No. 438, 1990-3, pp.271-276. (in Japanese)      Mar 1990   [Refereed]
Mechanical Conditions Dominating Cyclic Stress Corrosion Cracks of High-Strength Steel under Combined Cyclic/Static Multiaxial Load
Kohji Minoshima, Toru Kiuchi, and Kenjiro Komai
Transactions of Japan Society of Mechanical Engineers, Series A   55(519) 2277-2284   Nov 1989   [Refereed]
Corrosion Fatigue Crack Growth Characteristics of High-Tensile Strength Steel under Simulated Sea-Wave Loadings
Kenjiro Komai, Kohji Minoshima, and Guisik Kim
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 55, No. 515, 1989-7, pp.1512-1518. (in Japanese)   55(515) 1512-1518   Jul 1989   [Refereed]
Kohji MINOSHIMA, Tadashi SUGIYAMA, Kenjiro KOMAI
Trans. JSME, Series A   55(512) 689-696   Apr 1989   [Refereed]
Recent Advances in Computer Aided Fractography by Image Processing Techniques
Kenjiro Komai and Kohji Minoshima
Boshoku Gijutsu, Vol. 35, No. 12, 1988-12, pp. 758-764. (in Japanese)      Dec 1988   [Refereed]
The Influence of Water on the Mechanical Properties and Fatigue Strength of Angle-Ply Carbon/Epoxy Composites
Kenjiro Komai, Kohji Minoshima, Toyoshige Shibutani, and T. Nomura
Transactions of Japan Society of Mechanical Engineers, Series A   54(505) 1677-1683   Sep 1988   [Refereed]
Quantitative Analysis of Facet Sizes of Cleavage Failure in Charpy Impact Tests Using a Computer Image Processing Technique
Kohji Minoshima, Tatsuo Nagasaki and Kenjiro Komai
Transactions of Japan Society of Mechanical Engineers, Series A   54(504) 1559-1565   Aug 1988   [Refereed]
Corrosion Fatigue Crack Initiation of High-Tensile Strength Steels in Synthetic Seawater
K. Komai, K. Minoshima, S. Kinoshita, and G. Kim
JSME International Journa   31(3) 606-612   Jul 1988   [Refereed]
Crack Initiation behavior of Cyclic SCC under Bending and Torsional Loads in High-Strength Steel
Kohji Minoshima, Atsushi Okubo, and Kenjiro Komai
Journal of the Society of Materials Science, Japan   37(417) 670-675   Jun 1988   [Refereed]
The Effects of Stress Cycle Frequency and Stress Waveform on SCC Crack Growth in High-Strength Steel and Automatic Classification of Mixed Mode of Intergranular and Transgranular Cracking
Kohji Minoshima, Masaki Ojima, and Kenjiro Komai
Transactions of Japan Society of Mechanical Engineers, Series A   54(500) 670-678   Apr 1988   [Refereed]
An Estimation Method of Long-Term Corrosion Fatiue Crack Growth Characteristics
Kenjiro Komai, Kohji Minoshima, and Guisik Kim
Transactions of Japan Society of Mechanical Engineers, Series A   54(499) 509-512   Mar 1988   [Refereed]
Corrosion-Fatigue Crack Growth Characteristics of High-Tensile Strength Steel Weldments in Synthetic Seawater
Kenjiro Komai, Kohji Minoshima, Guisik Kim, and Hideki Okamoto
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 55, No. 510, 1988-2, pp.179-185. (in Japanese)      Feb 1988   [Refereed]
Current Status and Future Trends on Envitromental Strength of Materials
Kenjiro Komai and Kohji Minoshima
Transactions of Japan Society of Mechanical Engineers, Series A, Vol. 54, No. 498, 1988-2, pp.181-189. (in Japanese)   54(498) 181-189   Feb 1988   [Refereed]
Reconstruction Technique of Three-Dimensional Shape by SEM Images
Kenjiro Komai, Kohji Minoshima, Jun Kikuchi, Masatoshi Noguchi, and Guisik Kim
Transactions of Japan Society of Mechanical Engineers, Series A   53(494) 1961-1965   Oct 1987   [Refereed]
SCC Crack Growth in Al-Zn-Mg Alloy under Dynamic Mized Mode Loading Condition
Kenjiro Komai, Kohji Minoshima, and Mitsuhiro Yasumura
Journal of the Society of Materials Science, Japan, Vol. 36, No. 404, 1987-5, pp.488-494. (in Japanese)      May 1987   [Refereed]
Corrosion Fatigue Crak Initiation Behavior of 80kgf/mm2 High-Tensile Strength Steel Weldment in Synthetic Seawater
Kenjiro Komai, Kohji Minoshima, and Guisik Kim
Journal of the Society of Materials Science, Japan   36(401) 141-146   Feb 1987   [Refereed]
駒井 謙治郎, 箕島 弘二, 木下 定, 金 貴植
Trans. JSME, Series A   53(496) 2267-2273   1987   [Refereed]
The Influence of Small Vibratory Stress and Anisotropy of Grains on SCC Strength in Aluminum Alloy
Kenjiro Komai, Kohji Minoshima, and Yutaka Nishide
Transactions of Japan Society of Mechanical Engineers, Series A   52(480) 1809-1815   Aug 1986   [Refereed]
Influence of Anisotropy of Material on Dynamic SCC Crack Growth in a High-Strength
Kenjiro Komai, Kohji Minoshima, Masaki Kondo, and Mitsuhiro Yasumura
Journal of the Society of Materials Science, Japan, Vol. 35, No. 393, 1986-6, pp.1431-1437. (in Japanese)      Jun 1986   [Refereed]

Misc

 
Kohi Minoshima
Journal of the Society of Materials Science, Japan   53(5) 578-585   Apr 2004   [Refereed][Invited]
Kohji Minoshima and Kenjiro Komai
Materia Japan, Vol. 41, No. 10, 2002-10, pp. 668-672.      Oct 2002   [Refereed][Invited]
Kohji Minoshima and Kenjiro Komai
Transactions of Japan Society of Mechanical Engineers, Series A   67(655) 384-392   Mar 2001   [Refereed][Invited]
Fatigue & Fracture of Engineering Materials and Structures   23(12) 1033-1040   2000
Internationa Journal of Fatigue   22(9) 757-765   2000
Kohji MINOSHIMA, Yoshihiro MAEKAWA, Tetsuya YAMADA, Kenjiro KOMAI
JSME International Journal, Series A   43(1) 69-75   2000
Fatigue & Fracture of Engineering Materials and Structures   23(5) 435-443   2000
Kohji Minoshima and Kenjiro Komai
Journal of the Society of Materials Science, Japan   47(4) 427-433   Apr 1998   [Refereed][Invited]
Fatigue & Fracture of Engineering Materials and Structures   21(12) 1435-1446   1998
Fracture and Fatigue Behavior of Single of Single Crystal Silicon Microelements and Nanoscopic AFM Damage Evaluation(共著)
Microsytem Technologies   5(1) 30-37   1998
Kohji MINOSHIMA, Shigeyoshi SATOH, Kenjiro KOMAI
JSME International Journal, Series A   41(2) 252-259   1998
Kenjiro KOMAI, Kohji MINOSHIMA, Tsuyoshi MIYAWAKI
JSME International Journal, Series A   41(1) 49-56   1998
Materials Science Research International   2(4) 209-219   1996
In Situ Nanoscopic Visualization of Stress Corrosion Cracking of High-Strength Aluminum Alloy by Scanning Atomic Force Microscopy(共著)
Journal de Physique IV, Colloque C6, supp(]E85EE[)ment au Journal de Physique III   6(C6) 413-420   1996
Kenjiro Komai and Kohji Minoshima
Materia Japan (Bulletin of Japan Institute of Metals)   34(9) 1057-1061   Sep 1995   [Refereed][Invited]
Kohji Minoshima
ournal of the Society of Materials Science, Japan   43(492) 1174-1180   Jun 1994   [Refereed][Invited]
Recognition of Different Fracture Surface Morphologies Using Computer Image Processing Technique(共著)
JSME International Journal   36(2) 220-227   1993
Application of Image Processing Technique to Fractography
Kenjiro Komai and Kohji Minoshima
Journal of Japan Institute of Light Metals, Vol.42, No. 9, 1992-9, pp. 537-545. (in Japanese)      Sep 1992   [Refereed][Invited]
Hygrothermal Degradation and Failure Process of Advanced Fibre-Reinforced Plastics
Materials Science and Engineering   A143, 155-166/,    1991
5. Recent Development in Measurements and Monitoring Technique in the Field of Fracture Mecahnics Experiments
Keiji Ogura, Yoshio Miyoshi, Shiro Kubo, and Kohji Minoshima
Journal of the Society of Materials Science, Japan, Vol. 39, No. 440, 1990-5, pp. 575-581. (in Japanese)      May 1990   [Refereed][Invited]
Computer Image Processing and Pattern Recognition of Fracture Surfaces
Kohji Minoshima
Recent Topics in Materials Strength and Mechanics, Japan Society of Mechanical Engineers, 1987-6, pp. 133-138. (in Japanese)      Jun 1987   [Refereed][Invited]
Influence of Stress Ratio and Stress Cycle Frequency on Dynamic Stress Corrosion Crack Growth of High-Strength Al Alloy
Trans, JSME, Series A   59(459) 1804-1810   1984
Influences of Vibratory Stresses on Initiation Behavior of Stress Corrosion Cracking in a High-strength Steel
Journal of Japan Institute of Melals   48(3) 307-311   1984

Books etc

 
Influence of Specimen Size and Sub-Micron Notch on the Fracture Behavior of Specimen Size and Sub-Micron Notch on the Fracture Behavior of Single Crystal Silicon Microelements and Nanoscopic AFM Damage Evaluation (共著)
Materials Science of Microelectromechanical Systems (MEMS) Devices, A. H. Heuer and S. J. Jacobs, Eds. , MRS Symposium Proceedings   1999   
Fracture and Fatigue Behavior in Micromaterials (共著)
Small Fatigue Cracks : Mechanics, Mechanisms and Application, K. S. Ravivhandran, R. O. Ritchie, and Y. Murakami Eds. , Elsevier Science Ltd. , Oxford, UK   1999   
Development of an Expert System for Fractography of Environmentally Assisted Cracking(共著)
Computerization and Networking of Materials Database : Fifth Volume, ASTM STP 1311   1997   
Development of an Expert System for Fractography of Environmentally Assisted Cracking(共著)
Computarization and Networking of Materials Database : Fifth Volume, ASTM STP 1311, S. Nishijima and A. Iwata. Eds. , American Society for Testing and Materials   1997   
Fatigue Response of Metal Matrix Composites (共著)
ASTM STP 1184 (Cyclic Deformation, Fracture and Nondestructive Evaluation of Advanced Materials : Second Volume)   1994   
Tensile and Tension-Tension Fatigue Behavior of γ-Al2O3/Al Metal Matrix Composite at Room and Elevated Temperature(共著)
Fractography of Modern Engineering Materials : Composites and Metals, Second Volume, ASTM STP 1203   1993   
Development of Diagnostic Expert System for Environmentally Assisted Cracking (EXENAC) and Importance Evaluation of Knowledge in Inference(共著)
Computerization and Networking of Materials Database : Third Volume, ASTM STP 1140   1992   
Mechanisms of Fracture and Failure in Metal Matrix Composites
Metal Matrix Composite Processing, Microstructure and Properties   1991   
Mechanical and Fatigue Fracture Behaviour and Salt Water Environmental Effects on Ceramic Fibre(Si-Ti-C-O)-Aluminium Matrix Composites(共著)
Structural Materials, Vol. 2   1991   
Mechanical Condition Dominating Cyclic Stress Corrosion Cracking of a High-Strength Steel under Multiaxial Loads
Environment-Induced Cracking of Metals   1990   
Stress Corrosion Cracking of High-Strength Steels under Dynamic Loading Conditions(共著)
Localized Corrosion   1988   
SCC Crack Growth under Vibratory Stress of High-R Values
Materials, Experimentation and Design in Fatigue   1981   

Research Grants & Projects

 
Environmental Strength of Advanced Materials
Mechanical Evaluation of Micromaterials
Nanoscopic Damage Evaluation and Nanofractography with Scanning Probe Microscopy (SPM/STM/AFM)
Fabrication and Eualuation of Micromaterials
Environmental Strength of Engineering Materials under Dynamic Loading Conditions