Tetsuya Nonaka - My portal

Profile Information

Affiliation: Graduate School of Engineering, Department of Mechanical Engineering and Science, Kyoto University

Degree: Master of Engineering

J-GLOBAL ID: 200901043184629738
researchmap Member ID: 1000027484

Research Interests

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine elements and tribology /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Design engineering /

Awards

1991

日本機械学会賞(論文賞)

Papers

Strength of spur gear teeth with small modules of the order of 0.1 mm: (1st report, nature of tooth failure)

T. Nonaka, D. Satoh, K. Miyake, A. Kubo

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 68(8) 2431-2437, 2002 Peer-reviewed
Palm oil and mineral oil based lubricants - their tribological and emission performance

HH Masjuki, MA Maleque, A Kubo, T Nonaka

TRIBOLOGY INTERNATIONAL, 32(6) 305-314, Jun, 1999 Peer-reviewed
Identification of the machine settings of real hypoid gear tooth surfaces

C Gosselin, T Nonaka, Y Shiono, A Kubo, T Tatsuno

JOURNAL OF MECHANICAL DESIGN, 120(3) 429-440, Sep, 1998 Peer-reviewed
A Computer Based Approach for Evaluation of Operating Performances of Bevel and Hypoid Gears

A. Kubo, I. Tarutani, C. Gosselin, T. Nonaka, N. Aoyama, Z. Wang

JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing, 40(4) 749-767, 1997 Peer-reviewed
Prediction of performance of involute helical gears by observation of tooth contact pattern

A. Kubo, M. Matsu-Ura, T. Nonaka

American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 88 551-564, 1996 Peer-reviewed
On Simulation Methods of Performance of Hypoid and Spiral Bevel Gears (2nd Report, Influence of Definition of Reference Tooth Flank on the Accuracy of Simulation)

KUBO Aizoh, TARUTANI Ichiro, GOSSELIN Claude, NONAKA Tetsuya, AOYAMA Noboru, WANG Zhonghou

Transactions of the Japan Society of Mechanical Engineers. Series C., 62(599) 2842-2850, 1996 Peer-reviewed
Prediction of performance of involute helical gears by observation of tooth contact pattern (2nd report, Accuracy of prediction for composite error surface and gear performance)

Aizoh Kubo, Masayuki Matsu-Ura, Tetsuya Nonaka

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 62(596) 1565-1573, 1996 Peer-reviewed
Optimum designing method of heavily loaded involute spur gear tooth against scuffing failure

Jun-ichi Shigeura, Aizoh Kubo, Tetsuya Nonaka, Yasuhisa Furuta, Yasuhiro Sekine

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 61(582) 354-361, 1995 Peer-reviewed
THERMAL ELASTOHYDRODYNAMIC LUBRICATION OF ROLLING SLIDING LINE CONTACTS

R WOLFF, T NONAKA, A KUBO, K MATSUO

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 114(4) 706-713, Oct, 1992 Peer-reviewed
Silent gear design for mass-produced gears with scatters in tooth form accuracy

T. Nonaka, A. Kubo, S. Kato, T. Ohmori

American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, 43 pt 2 589-595, 1992 Peer-reviewed
Design of silent gears considering the scattering in tooth form accuracy of mass-production gears

Tetsuya Nonaka, Aizoh Kubo, Shogo Kato, Toshio Ohmori

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 57(544) 3969-3974, 1991 Peer-reviewed
Estimation of transmission error of cylindrical involute gears by tooth contact pattern

Aizoh Kubo, Takashi Kuboki, Tetsuya Nonaka

Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 56(529) 2503-2508, 1990 Peer-reviewed
Evaluation of toothform- and toothtrace accuracy of power transmission gears and its effect on the performance. (2nd Report: Difference between intended and actual performance of gears)

A. Kubo, T. Nonaka, K. Fujimoto, Y. Ariura, T. Nakanishi, T. Ueno

891-897, 1989 Peer-reviewed
FUNDAMENTAL ON SCORING FAILURE (2ND REPORT: A MODEL FOR SCORING AND CRITICAL TEMPERATURE).

Aizoh Kubo, Tetsuya Nonaka, Ritsuya Iwai, Takeshi Fujitsu, Hiroshi Yabe

Bulletin of the JSME, 27(230) 1751-1758, 1984 Peer-reviewed
FUNDAMENTAL ON SCORING FAILURE - (1ST REPORT, INITIATION AND PROGRESS OF SCORING ON GEAR TEETH).

Ritsuya Iwai, Tetsuya Nonaka, Aizoh Kubo, Hiroshi Yabe

Bulletin of the JSME, 27(226) 823-830, 1984 Peer-reviewed
Evaluation of service lubricants and metals correlation of bench tests with engines.

T. Nonaka, A. Cameron

1984 Peer-reviewed

Misc.

Strength of Spur Gear Teeth with Small Modules of the Order of 0.1 mm. 1st Report. Nature of Tooth Failure.

NONAKA TETSUYA, SATO DAISHI, MIYAKE KOICHI, KUBO AIZO

日本機械学会論文集 C編, 68(672) 2431-2437, Aug 25, 2002
Performance, emissions and wear characteristics of an indirect injection diesel engine using coconut oil blended fuel

HH Masjuki, MA Kalam, MA Maleque, A Kubo, T Nonaka

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 215(D3) 393-404, 2001 Peer-reviewed
Simulation of Deterioration of Hypoid Gear Performance due to Tooth Flank Wear (3rd Report, Influence of initial tooth flank form on the deterioration of gear performance)

Zhonghou Wang, Aizoh Kubo, Soichiro Asano, Shogo Kato, Tetsuya Nonaka

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(647) 2371-2376, 2000
Simulation of Deterioration of Hypoid Gear Performance due to Tooth Flank Wear (1st Report, Data Processing of Measured Tooth Flank Form Deviation for Performance Simulation)

Zhonghou Wang, Aizoh Kubo, Soichiro Asano, Shogo Kato, Tetsuya Nonaka

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(647) 2354-2362, 2000
Simulation of Deterioration of Hypoid Gear Performance due to Tooth Flank Wear (2nd Report, Model for Tooth Flank Wear and the Change of Gear Performance Resulted)

Zhonghou Wang, Aizoh Kubo, Soichiro Asano, Shogo Kato, Tetsuya Nonaka

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(647) 2363-2370, 2000
Tooth Root Stress Analysis of Hypoid Gears: 2nd Report, Evaluation of the Predicting Method Proposed

Zhonghou Wang, Aizoh Kubo, Norio Hatanaka, Satoshi Aok, Tetsuya Nonaka, Yoshio Shiono, Shogo Kato, C. Gosselin

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(652) 4033-4039, 2000
Tooth Root Stress Analysis of Hypoid Gears: 1st Report, Introduction of Predicting Method for the Tooth Root Stress

Zhonghou Wang, Satoshi Aoki, Kaneto Takeda, Tetsuya Nonaka, C. Gosselin

Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 66(652) 4024-4032, 2000
Prediction of Performance of Hypoid Gears by Observation of Tooth Contact Pattern. 1st Report. Algorithm for Predicting Composite Error Surface).

WANG Z, KUBO AIZO, NONAKA TETSUYA

日本機械学会論文集 C編, 64(624) 3103-3111, Aug, 1998
Prediction of Performance of Hypoid Gears by Observation of Tooth Contact Pattern. 2nd Report. Contact Pattern, Transmission Error and Stresses in Gear.

WANG Z, KUBO AIZO, NONAKA TETSUYA

日本機械学会論文集 C編, 64(624) 3112-3119, Aug, 1998
On Simulation Methods of Performance of Hypoid and Spiral Bevel Gears. 1st Report. Definition of Reference for Tooth Form Accuracy and Method of Simulation.

KUBO AIZO, TARUTANI ICHIRO, GOSSELIN C, NONAKA TETSUYA, AOYAMA NOBORU, WANG Z

日本機械学会論文集 C編, 62(599) 2833-2841, Jul, 1996
The Optimum Designing Method of Heavily Loaded Involute Spur Gear Tooth against Scuffing Failure.

Shigeura Jun-Ichi, Kubo Aizoh, Nonaka Tetsuya, Furuta Yasuhisa, Sekine Yasuhiro

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 61(582) 354-361, 1995
スコーリング発生機構に関する基礎的研究Ｉ歯車におけるスコーリングの発生・進展

岩井律哉, 野中鉄也, 久保愛三, 矢部寛

日本機械学会論文集 C編, 49(444) 1407-1415, 1983

Professional Memberships

Research Projects

Industrial Property Rights

特開2018-050478 飲用又は食用に供する鉄分含有液の製造方法、飲料の製造方法、粉末清涼飲料の製造方法、食品の製造方法及び鉄分供給物

野中鉄也
特開2016-195579 鉄分供給方法、鉄分供給物、植物の栽培方法、ユーグレナの培養方法及び魚介類の養殖方法

山下岳史, 出口哲也, 野中鉄也
特開2016-055255 液体の撹拌装置

遠藤良幸, 野中鉄也
特許第5707589号潤滑剤組成物および潤滑液組成物

野中鉄也, 設楽裕治, 開米貴
特許第5693240号潤滑油組成物

野中鉄也, 設楽裕治, 開米貴
WO2010-079744 潤滑油組成物

野中鉄也, 設楽裕治, 開米貴
WO2010-079743 潤滑剤組成物および潤滑液組成物

野中鉄也, 設楽裕治, 開米貴