NAKAMACHI Eiji

J-GLOBAL         Last updated: Nov 21, 2019 at 09:42
 
Avatar
Name
NAKAMACHI Eiji
Affiliation
Doshisha University
Section
Faculty of Life and Medical Sciences Department of Biomedical Engineering
Job title
Professor

Research Areas

 
 

Academic & Professional Experience

 
Apr 2008
 - 
Today
Professor, Department of Biomedical Engineering, Doshisha University
 
Apr 2007
 - 
Mar 2008
Professor, Faculty of Life and Medical Science, Doshisha University
 
1975
 - 
1979
Yatsushiro National College of Technology, Research Assistant ,  
 
1979
 - 
1983
Yatsushiro National College of Technology, Lecturer,  
 
1983
 - 
1989
Yatsushiro National College of Technology,Associate Professor,  
 
1989
 - 
1995
Osaka Univesrsity, Associate Professor
 
1995
 - 
2007
Osaka Institute of Technology, Professor
 
2007
   
 
Doshisha University, Professor
 
1981
 - 
1982
McMaster University,Research Associate
 
1987
 - 
1988
The Ohio State University, Visiting Associate Professor
 

Education

 
 
 - 
1975
Graduate School, Division of Engineering, Osaka University
 
 
 - 
1973
Faculty of Engineering, Kumamoto University
 

Committee Memberships

 
2003
   
 
Japan Society of Mechanical  Boards
 
1999
   
 
Japan Society of Technology of Plasticity  board
 
1995
   
 
Japan Society of Materials Science  board
 

Awards & Honors

 
2010
Paper Award Japan Society of Technology of Plasticity
 
2005
Fellowship Award of Japan Society of Technology of Plasticity
 
2003
Fellowship Award of Japan Society of Mechanical
 
2003
Plasticity Technology Achievements Award of Japan Society of Technology of Plasticity
 
2001
Computational Mechanics Achievements Award, Japan Society of Mechanical
 

Published Papers

 
Enhancement of nerve axonal extension by an AC magnetic field stimulation bio-reactor using three-dimensional culture
NAKAMACHI Eiji
J. Biomechanical Sci. and Engng.   14(2) https://doi.org/10.1299/jbse.1   Apr 2019   [Refereed]
MULTI-SCALE CRYSTALLINE PLASTICITY FINITE ELEMENT ANALYSIS OF TEXTURE EVOLUTION IN DRAWING PROCESS
EIJI NAKAMACHI, TAKASHI YOSHIDA, HIROYUKI KURAMAE, TOSHIHIKO YAMAGUCHI, YUSUKE MORITA
Roy. J. Techn. Sci. Appl. Mechanics   Vol. 63(No 2) pp. 93−103   Jun 2018   [Refereed][Invited]
Enhancement of PC12 axonal extension via hybrid electromagnetic and mechanical stimulation
Eiji Nakamachi, Eiji Nakamachi, Kazuya Matsumoto, Ryota Sakiyama, Koji Yamamoto and Yusuke Morita
J. Biomechanical Sci. and Engng.   13(2) DOI: 10.1299/jbse.18-00024-12   Apr 2018   [Refereed][Invited]
Development of furnace wall inspection system,
Eiji Nakamachi, Munetaka Ryu, Hidetoshi Sakamaoto, Yoshifumi Ohbuchi, Tsuyoshi Yoshida, Eiji Nakamachi
Int. J. Engineering and Innovative Technology (IJEIT)   7(11) 19-23   2018   [Refereed][Invited]
Development of 3-Dimensional Blood Vessel Imaging System Using Stereo Method for Laparoscopic Surgery
Eiji NAKAMACH, Kirara Kono, Masaki NAKAGAWA, Yusuke MORITA
同志社大学ハリス理化学研究報告   59巻(1号) 43477   2018
Physical and Biological Properties of a Novel Anti-adhesion Material Made of Thermally Cross-linked Gelatin Film: Investigation of the Usefulness as Anti-adhesion Material
Eiji Nakamachi, Tsunehito Horii, Hiroyuki Tsujimoto, Hiroe Miyamoto, Koki Yamanaka, Shota Tanaka, Hiroko Torii, Yuki Ozamoto, Hideki Takamori, Eiji Nakamachi, Yoshito Ikada, Akeo Hagiwara,
Journal of Biomedical Materials Research Part B: Applied Biomaterials   (DOI:10.1002/jbm.b.33880) 43473   2017
Biocompatible Aurivillius-like layered ferroelectric BaIn2Ta2O9
Eiji Nakamachi,, Yayoi Fujimoto, Eiji Nakamachi, Yusuke Morita
Ceramics International   (43, DOI:10.1016/j.ceramint.2017.03.024) 7278-7281   2017
Development and Evaluation of Double-Frequency Vibration Energy Harvester Using Multi-Morph Piezoelectric Cantilever
Eiji NAKAMACHI, Yuji GOTO, Yusuke MORITA
同志社大学ハリス理化学研究報告   58巻(1号) 43475   2017
Development of Three-dimensional Forearm Vein Imaging System Using Light-section Method for Automatic Blood Sampling
Eiji NAKAMACHI, Masaki NAKAGAWA, Ryouhei KIMURA, Yusuke MORITA
同志社大学ハリス理化学研究報告   58巻(1号) 43787   2017
Development of Laparoscopic Camera System to Detect Gastroepiploic Artery by Using Near-infrared Light Stereo Method
仲町英治,中川昌紀,成田和行,森田有亮,萩原明朗
同志社大学ハリス理化学研究報告   56 4   2016
Multiphoton microscope measurement–based biphasic multiscale analyses of knee joint articular cartilage and chondrocyte by using visco‐anisotropic hyperelastic finite element method and smoothed particle hydrodynamics method
Eiji Nakamachi, Tomohiro Noma , Kaito Nakahara , Yoshihiro Tomita , Yusuke Morita
International Journal for Numerical Methods in Biomedical Engineering   (e2864.) 43488   2016
E Nakamachi, S Murakami, H Koga Y. Morita
J. Micro/Nanolith. MEMS MOEMS   Vol. 14(2)(2) 025004-1-025004-10   2015
T. TAKAKI, K. NAKAGAWA, Y. MORITA and E. NAKAMACHI
Mechanical Engineering Journal   Vol.2, No.3(3) DOI: 10.1299/mej.15-00063   2015
Two-scale finite element analyses for bendability and springback evaluation based on crystallographic homogenization method
Eiji Nakamachi, Takeshi Honda, Hiroyuki Kuramae, Yusuke Morita, Tomiso Ohata and Hideo Morimoto
International Journal of Mechanical Science   DOI: 10.1016/j.ijmecsci.2014.01.011 109–121   2014
Eiji Nakamachi, Takahiro Uchida, Hiroyuki Kuramae and Yusuke Morita,
Int. J. Numer. Meth. Biomed. Engng.   30, DOI: 10.1002/cnm.2630 796-813   2014
Process Metallurgy Analyses to Design a High-Bendability and High-Springback Property Sheet by Using Two-Scale Finite Element Method",
Eiji Nakamachi, Takeshi Honda, Hiroyuki Kuramae, Yusuke Morita and Hideo Morimoto
International Journal of Mechanical Sciences   DOI: 10.1016/j.ijmecsci.2014.06.001(j.ijmecsci.2014.06.001)    2014
Development of microarray device for functional evaluation of PC12D cell axonal extension ability
Eiji Nakamachi, J. Yanagimoto, Shinya Murakami and Yusuke Morita
Journal of Micro/Nanolithography, MEMS, and MOEMS   Vol. 13(2) 023013-1-023013-9   2014
Process Crystallographic Simulation for Biocompatible Piezoelectric Material Design and Generation,
Nakamachi, E., Uetsuji, Y., Kuramae, H., Tsuchiya, K. and Hwang, H.,
Arch. Comput. Methods Engng.,   Vol. 20 - 2 155-183, DOI 10.1007/s11831-013-9084-6   2013
NAKAMACHI Eiji, Nakamachi, E., Mizuno, Y. and Morita
Int. J. of Optics   Vol. 2012, Article ID 258626 11pages   2012
Observation of High Speed Glass Bottle Fracture Behaviors by Underwater Schockwave
Nagata, K., Sakamoto, H., Ohbuchi, Y., Kuramae, H. and Nakamachi, E.
Advanced Material Research, Trans Tech Publications, Switzland   586    2012
Three-Scale Structure Analysis Code and Thin Film Generation of a New Biocompatible Piezoelectric Material MgSiO3
Hwang, H., Uetsuji, Y. and Nakamachi, E.
Modern Aspects of Bulk Crystal and Thin Film Preparation, Edits. Nikolai Kolesnikov and Elena Borisenko, InTech. Publisher   Chap. 13, ISBN 978-953-307-610-2 DOI: 10.5772/30349   2012
第一原理計算によるペロブスカイト型非酸化物ABX3(X=F,Cl,S)の構造・機能評価
上辻靖智,槌谷和義,仲町英治
材料 (2012-9), pp.750-755.   61巻(9号) 750-755   2012
Observation of High Speed Glass Bottle Fracture Behaviours by Underwater Schockwave
Nagata, K., Sakamoto, H., Ohbuchi, Y., Kuramae, H. and Nakamachi, E.
Advanced Material Research, Trans Tech Publications, Switzland   Vol. 586 151-155   2012
Visualization of High-Speed Fracture Phenomena of Glass Container for Effective Glass Recycling Technology Development
Sakamoto, H., Ohbuchi, Y., Kuramae, H., Nakamura,Y., Nakamachi, E. and Itoh, S.
Procedia Engineering   Vol.10 2472-2477   2011
Process Metallurgy Design for High-Formability Aluminum Alloy Sheet Metal Generation by Using Two-Scale FEM
Kuramae, H., Sakamoto, H., Morimoto, H. and Nakamachi, E.
Procedia Engineering   Vol.10    2011
Nakamachi, E., Hwang, H., Okamoto, N. and Morita, Y.
J. Micro/Nanolith. MEMS MOEMS   10(3)(3) pp. 033013-1-7,,DOI: 10.1117/1.3624515   2011
Development of Automatic 3D Blood Vessel Search and Automatic Blood Sampling System by Using Hybrid Stereo-Autofocus Method
Nakamachi, E., Mizuno, Y. and Morita
Int. J. of Optics   Vol. 2012, Article ID 258626(Article ID 258626) 11pages,doi: 10.1155/2012/258626   2011
Process Metallurgy Design of Aluminum Alloy Sheet Rolling by Using Two-scale Finite Element Analysis and Optimization Algorithm
International Journal of Mechanical Sciences   52(2) 146-157   2010
Multi-scale Parallel Finite Element Analyses of LDH Sheet Formability Tests Based on Crystallographic homogenization method
仲町 英治, Hiroyuki Kuramae, Yuki Ikeya, Hidetoshi Sakamoto, Hideo Morimoto, Eiji Nakamachi,
International Journal of Mechanical Sciences   52(2) 183-197   2010
Three-Scale Process-Crystallographic Analysis of A New Biocompatible Piezoelectric Material MgSiO3 Generation
NAKAMACHI Eiji, Nakamachi, E., Hwang, H. and Uetsuji, Y.
Proc. of 2nd International Conference on Computer Technology and Development   'No.N1 206-210   2010
Development of A New Biocompatible MgSiO3 Piezoelectric Thin Film
Hwang, H., Uetsuji, Y., Tanaka, K., Katayama, T. and Nakamachi, E.
Journal of Solid Mechanics and Materials Engineering   Vol.4(No.11) 1636-1642   2010
Process Metallurgy Design of Aluminum Alloy Sheet Rolling by Using Two-scale Finite Element Analysis and Optimization Algorithm
Eiji Nakamachi, Hiroyuki Kuramae, Hidetoshi Sakamoto, Hideo Morimoto
International Journal of Mechanical Sciences   52-2 146-157   2009
Multi-scale Parallel Finite Element Analyses of LDH Sheet Formability Tests Based on Crystallographic homogenization method
Hiroyuki Kuramae, Yuki Ikeya, Hidetoshi Sakamoto, Hideo Morimoto, Eiji Nakamachi,
International Journal of Mechanical Sciences   52-2 183-197   2009
Design and Development of a Biocompatible Painless Microneedle by the Ion Sputtering Deposition Method
Kazuyoshi Tsuchiya, Satoshi Jinnin, Hidetake Yamamoto, Yasutomo Uetsuji, Eiji Nakamachi
Precision Engng.   34 461-466   2009
Multi-scale finite element analysis of LDH Tests based on crystallographic homogenization method
Eiji Nakamachi, Yuki Ikeya, Hidetoshi Sakamoto, Hideo Morimoto, Hiroyuki Kuramae
Proc. of COMPLAS2009   ThA05-5-1-4(ThA05-5-1-4)    2009
First-Principles Study on Crystal Structure and Piezoelectricity of Perovskite-Type Silicon Oxides
仲町 英治, Yasutomo UETSUJI , Hwishim HWANG , Kazuyoshi TSUCHIYA , Eiji NAKAMACHI
Journal of Solid Mechanics and Materials Engineering   2(11) 1427-1435   2008
Crystal Growth Prediction by First-Principles Calculations for Epitaxial Piezoelectric Thin Films
Journal of Computational Science and Technology   3(1) 264-274   2008
Proposition of a First-Principles Aided Triple-Scale Analysis for Biocompatible Piezoelectric Thin Films
Journal of Computational Science and Technology   3(2) 499-508   2008
Identification of Material Properties of PZT Single Crystal Based on A Crystallographic Homogenization Method
仲町 英治, Uetsuji, Y., Tanaka, S., Tsuchiya, K., Ueda, S.,Nakamachi, E.
Journal of Solid Mechanics and Materials Engineering   1(1) 140-151   2007
A Proposal for Optimization of Crystal Orientations in Piezoelectric Ceramics by Multiscale Finite Element Analysis through Crystallographic Homogenization Method
仲町 英治, Yasutomo UETSUJI,Mitsuteru HORIO, Kazuyoshi TSUCHIYA and Eiji NAKAMACHI
Journal of Solid Mechanics and Materials Engineering   1(9) 1147-1156   2007
Multi Scale Finite Element Analyses of Sheet Metals by Using SEM-EBSD Measured Crystallographic RVE Models
Int. J. Plasticity, 23   23 450-489   2007   [Refereed]
A Study on Bio-Compatible Piezoelectric Materials by First Principles Calculation
仲町 英治, Uetsuji, Y., Imoto, K., Kumazawa, K., Tsuchiya, K., Ueda
Journal of Solid Mechanics and Materials Engineering   1(2) 191-201   2007

Misc

 
Development of New Biocompatible MgSiO3 Piezoelectric Thin Films
Hwang, H., Uetsuji, Y., Tsuchiya, K., Tanaka, K., Katayama,T. and Nakamachi, E.
Proc. of 2010 M&M International Symposium for Young Researchers   No.10-204    2010
2010-3
Development of Two Scale Finite Element Analysis Code to Assess the Sheet Formability
Proc. Plasticity 2006   454-456   2006
Fabrication of Smart Material PZT Thin Films by RF Magnetron Sputtering Method in Micro Actuators
JSME International Journal, Series A   49(2) 201-208   2006
Evaluation of Ferroelectric Properties of Piezoelectric Ceramics Based on Crystallographic Homogenization Method and Crystal Orientation Analysis by SEM/EBSD Technique
JSME International Journal, Series A   49(2) 209-215   2006
Development of MgSiO3 Biocompatible Piezoelectric Film for Bio-MEMS Actuator
SPIE International Symposium on Biomedical Applications of Micro- and Nanoengineering   6416(26) 49   2006
Development Of A Blood Vessel Searching Device For Health Monitoring Systems
SPIE International Symposium on Biomedical Applications of Micro- and Nanoengineering,   6416(14) 60   2006
Development of blood extraction pump by Shape Memory Alloy actuator for Bio-MEMS
SPIE International Symposium on Biomedical Applications of Micro- and Nanoengineering   6416(10) 59   2006
Development of Two Scale Finite Element Analysis Code to Assess the Sheet Formability
The 12th International Symposium on Plasticity and Its Applications, Halifax      2006
Multi-Scale Finite Element Modeling of Piezoelectric Materials by A Crystallographic Homogenization Method
The III European Conference on Computational Mechanics      2006
Multi Scale Finite Element Analyses By Using SEM-EBSD Crystallographic Modeling and Parallel Computing
Nakamachi, Eiji
NUMISHEET2005,Detroit      2005
Multi Scale Finite Element Analyses By Using SEM-EBSD Crystallographic Modeling and Parallel Computing
Nakamachi, Eiji
NUMISHEET2005,Detroit      2005
Development of Wearable medical device for bio-MEMS
Proc. of SPIE's International Symposium on Microelectronics, MEMS, and Nanotechnology, SPIE.Proc      2005
Parallel performance evaluation of multi-scale finite element analysis based on crystallographic homogenization method
Proc. of COMPLAS2005      2005
Crystallographic homogenization elasto plastic finite element analyses of poly crystal sheet material
Proc. of COMPLAS2005      2005
Parallel computing of multi-scale finite element sheet forming analyses based on crystallographic homogenization method
Proc. of NUMISHEET2005, AIP Conf. Proc   778 451-456   2005
Unit cell definition of polycrystal sheet material based on analyses
Proc. of NUMISHEET2005, AIP Conf. Proc   778 427-432   2005
Multi scale sheet metal forming analyses by using SEM-EBSD crystallographic modeling and parallel computing
Proc. of NUMISHEET2005, AIP Conf. Proc   778 421-426   2005
Multi-scale sheet metal forming analyses by using dynamic explicit homogenized finite element method
Proc. of NUMISHEET2005, AIP Conf. Proc.   778 415-420   2005
Development of Blood Extraction System for Health Monitoring System
Biomedical Microdevices   7(4) 347-353   2005
Identification of Crystal Grain Properties of PZT Ceramics using A Crystallographic Homogenization Method
Theoretical and Applied Mechanics Japan   54 77-82   2005
Multi-scale Finite Element Modeling of Polycrystalline Piezoelectric Materials
The 8th European Multigrid Conference on Multigrid, Multilevel and Multiscale Methods      2005
Numerical investigation on ferroellectric properties of piezoelectric materials using a crystallographic homogenization method
Modelling Simul. Mater. Sci. Eng   12(s) 303-317   2004
Development of optimum process design system for sheet fabrication using response surface method
J. Mater. Processing Technology   143(144) 667-672   2003
Development of RF magnetron sputtering method to fabricate PZT thin film actuator
Precision Engng   27 258-264   2003
Development of crystal plasticity design system to generate a high-strength and high-formability material
Computational Mechanics of Solid Materials at Large Strains, Ed. MIEHE, Christian, Kluwer Academic Publishers   454   2003
The effect of crystallographic textures on the formability of high-strength steel sheets
J. Mater. Process, Technol   122 104-111   2002
Formability assessment of FCC aluminum alloy sheet by using elastic/crystalline viscoplastic finite element analysis
Int. J. Plasticity   18 617-632   2002
Prediction of earing in textured aluminum sheets based on crystal plasticity
ACTA Mechanica Solida SINICA   14(2) 95-103   2001
Texture design of high-strength and high-formability steel sheet by using finite element and optimization method
Simulation of Materials Processing Theory, Methods and Applications, A.A.BALKEMA PUBLISHERS   191-196   2001
Investigations of the formability of BCC steel sheets by using crystalline plasticity finite element analysis
Materials and Design   23(1) 59-68   2001
Drawability Assessment of BCC Steel Sheet by Using Elastic/Crystalline Viscoplastic Finite Element Analyses
Int. J. Mech. Sci   43 631-652   2001
Overall Optimum Design of Material Process and Sheet Metal Fabricationby Using FE and Discretized Optimization Method
Proc. CCOMAS2000   110   2000
Development of Crystal Plasticity Finite Element Analysis Code Based on Crystal Motility Restructuring Theory
Proc. Of PLASTICITY 00   603-605   2000
Development of Head Crash Injury Criterion by Employing Dynamic-explicit Viscoelasitc Finite Element Method
Computational Biomechanics Riken Symposium   102-107   2000
Development of Optimum Design System for Sheet Fabrication
111   2000
Elastic/crystalline Viscoplastic Finite Element Analyses of Single-and Poly-Crystal Sheet Deformations and Their Experimental Verification
Int. J. Plasticity   16 1419-1441   2000
Development of Sheet Forming Optimization Using Transfer Process
Proc. of ICTP   2077-2082   1999
Elastic/Crystalline Viscoplastic Finite Element Analysis of Strain Localization of Sheet Material
Proc. of ICTP   1307-1312   1999
Improvement of Optimum Process Design System by Numerical Simulation - Discretized Optimization Method-
Proc.of NUMISHEET'99   299-304   1999
Development of Elastic /Crystalline Viscoplastic Finite Element Analysis Code Based on the Meso-Phenomenological Material Modeling
Proc. of NUMISHEET'99   79-84   1999
Design of Die Geometry for Metal Sheet Forming in Virtual Manufacturing
Int. J. of Industrial Engng   6(4) 271-281   1999
Molecular Structural Analysis of Actomyosin to Characterize the Motor Protein System
JSME International Journal   42(3) 746-752   1999
Molecular Structural Analyses of Actomyosin System in Water Molecules
Abstracts of the III World Congress of Biomechanics, Eds. Matsuzaki, Y., Nakamura, T. and Tanaka, E.   312   1998
Study of Formation-Resorption Cycle of Collagen-Hydroxyapatite Complex by Atomic Simulation
Abstracts of the III World Congress of Biomechanics, Eds. Matsuzaki, Y., Nakamura, T. and Tanaka, E   310   1998
OptimumDesign of Blank Shape in Sheet Forming by Using FE Analysis and Discretized Optimization Algorithm
Proc. Fourth World Congress on Computational Mechanics, VI-J, Forming session   (j) 43658   1998
Dynamic Explicit Elasto-Plastic Finite Element Analysis of the Contact-Impact Problems by Using New Contact Algorithm
Proc. Fourth World Congress on Computational Mechanics, Vii-G, Forming session   (G) 43471   1998
Optimum Design of Sheet Material and Sheet Forming Process by Using Virtual Manufacturing System
Proc.Fourth World Congress on Computational Mechanics, VI-J, Forming session   (j) 43471   1998
Dynamic-Explicit Finite Element Analysis of Crash Instability of Shell Structure
Modeling and Simulation Based Engineering, Eds. Atluri, S.N. and O'Donoghue, P.E   734-739   1998
Optimum Design of Sheet Forming Process by Using Finite Element and Discretized Optimization Methods
Int. J. Forming Processes   1(2) 163-185   1998
Improvement of Optimum Process Design System by Numerical Simulation
J. Mater. Process, Technol   80(81) 635-641   1998
Optimum Die Design for Sheet Metal Forming Process by Using Finite Element and Discretized Optimization Methods
Simulation of Materials Processing : Theory, Methods and Applications, Eds. Huetink, J. and Baaijens, F.T.P., A.A.BALKEMA   315-321   1998
Elastic/Crystalline Viscoplastic Finite Element Modeling Based on Hardening-Softening Evolution Equation
Simulation of Materials Processing:Theory, Methods and Applications, Eds. Huetink, J. and Baaijens, F.T.P., A.A.BALKEMA   315-321   1998
Elastic/Crystalline Viscoplastic Finite Element Analysis and Optimum Fabrication Design of Sheet Metal
Proc. of 5th Computational Plasticity   101-118   1997
Optimum Design of Metal Forming Based on Finite Element Analysis and Nonlinear Programming
Theoretical and Applied Mechanics, Eds. Tatsumi, T., Watanabe, E. and Kambe, T., Elsevier Science B.V   323-340   1997
The Inside-Outside Contact Search Algorithm for Finite Element Analysis
Int. J. Numer. Methods in Engrg   40 3665-3685   1997
Study of Texture Effect on Sheet Failure in LDH Test by Using Elastic/Crystalline Viscoplastic FE Analysis
J. Appl. Mech., Trans. ASME(ser. E)   64 519-524   1997
Computational Biomechanics
Springer      1996
A New Contact Algorithm of Dynamic Explicit FEM for Sheet Forming Simulation
Proc. of 5th International Conference on Technology of Plasticity   683-686   1996
E.Elastic/Crystalline Visoplastic FE Simulation of Sheet Forming Processes
Proc. of 5th International Conference on Technology of Plasticity   787-790   1996
Prediction of Plastic Instability of Sheet Metal by Using Elastic/Crystalline Viscoplastic FE Analysis
Proc.of NUMISHEET'96   136-143   1996
Nonlinear Contact and Friction Modeling in Dynamic Explicit Finite Element Analysis
Proc. of NUMISHEET'96   43724   1996
Development of Dynamic Explicit FEM Code for Sheet Metal Forming Simulation, Advances in Engineering Plasticity and its applications
Proc.of AEPA'96   721-726   1996
Development of optimum process design system by numerical simulation
Journal of Materials Process Technol   60 543-548   1996
Dynamic-Explicit Type Elastic Plastic Finite Element Simulation of Sheet Metal Forming -Hemispherical Punch Drawing
Engineering Computations   13(2+3+4) 327-338   1996
Elastic/Crystalline-Viscoplastic Finite Element Analysis of Dynamic Deformation of Sheet Metal
Engineering Computations   13(2+3+4) 308-326   1996
Static-explicit elastic plastic finite element simulation and virtual manufacturing of sheet metal forming
Engineering Computations   13(2+3+4) 283-307   1996
Elastic Crystalline-Viscoplastic FE Analysis of Dynamic Plastic Instability
Proc. of Plasticity'95   233-236   1995
Dynamic Plastic Instability Prediction of Sheet Stretching by Using Elastic Crystalline-viscoplastic FE Method, Computational Mechanics'95
Computational Mechanics'95, Proc. of Int. Conf. Computational Eng. Sci. Springer   1432-1437   1995
Numerical Simulation of Contact-Plastic Instability of Plate and Shell by Dynamic-Explicit Finite Element Methods
38th Japan Congress on Materials Research, JSMS   215-221   1995
Evaluation of the Dynamic Explicit/Elastoviscoplastic Finite-Element Method in Sheet-Forming Simulation
J.Materials Processing Technology   50 180-196   1995
Sheet-forming process characterization by static-explicit anisotropic elastic-plastic finite element simulation
J.Materials Processing Technology   50 116-132   1995
Optimum Process Design of Thermoplastic Plate
Proc. of 3rd World Congress on Computational Mechanics (Tokyo)   376-377   1994
Contact and Friction Algorithms in Dynamic Explicit FE Simulation of Sheet Metal Forming
Proc.of 3rd World Congress on Computational Mechanics ( Tokyo )   376-377   1994
Crystalline-Plasticity Finite Element Analysis of Sheet Metal Forming
Proc.of 3rd World Congress on Computational Mechanics ( Tokyo )   373-374   1994
The Numerical Analyses of Skeletal Muscle Contraction Based on Molecular Potential Theory
Proc.2nd World Congress of Biomechanics ( Amsterdam )   84-85   1994
NUMISHEET'93
   1993
3-D Dynamic Explicit Finite Element Simulation of Sheet Forming,
Advanced Technology of Plasticity 1993, Int.Academic Publishers   1828-1833   1993
Development of Virtual Manufacturing System for Automotive Sheet Forming
Advanced Technology of Plasticity 1993, Int. Academic Publishers   1799-1804   1993
Evaluation of Dynamic Explicit/ ElastoViscoplastic Finite Element Method in Sheet Forming Simulation,
NUMISHEET'93, Ed. Makinouch,A., Nakamachi, E., Onate, E., and Wagoner, R.H   173-186   1993
Sheet Forming Process Characterization by Static-Explicit Anisotropic Elastic-Plastic Finite Element Simulation
NUMISHEET'93, Ed.Makinouch, A, Nakamachi, E, Onate, E, and Wagoner, R.H   109-123   1993
Anisotropic Elastic-Plastic Finite Element Simulation of 3-D Sheet Forming Processes
Proc.of NUMIFORM'92   509-514   1992
Development of Process Simulation System for Auto-Body Panel Forming by Using FE Analysis and Laser Stereolithography Techniques
Proc.of IDDRG, Advanced Sheet Metal Forming Technology   235-242   1992
Deep Drawing Analysis of Square Cups with Coated Rate-Sensitive Steel Sheet
Proc.of Computational Plasticity III ( SPAIN )   1301-1310   1992
Finite Element Simulation of Sheet Forming Using Efficient Shell Model
Proc.of Computational Plasticity III ( SPAIN )   1263-1276   1992
Description of Tool Geometry and Formulation of Deformation Dependent Contact Problems
Proc.of Int.Conf of FE-Simulation of 3-D Sheet Metal Forming Processes in Automotive Industry, Zurich   75-107   1991
Finite Element Analyses of Box-Shaped Cup Drawing and Comparison with Experiments
ibid   357-379   1991
3-D Sheet Metal Forming Simulation of Automobile Panel by Thin Shell Finite Element Method
ibid   153-166   1991
Compatible Description of Tool Surfaces and FEM Meshes for Analysing Sheet Forming Operations
Int.J.Numer.Methods in Engrg   30 1471-1502   1990
Development of FEA of Sheet Forming with Arbitraly Shaped Tools
Advanced Technology of Plasticity   3 1129-1134   1990
Computer Aided Simulation of Sheet Metal Forming Procedure by Thin Shell Finite Element Analysis
Advanced Technology of Plasticity   4 1745-1750   1990
Compatible description of tool surfaces and FEM meshes for analyzing sheet forming operations,
Numiform89, ed.Thompson, E.G, et.al   489-496   1989
Thermal image analysis for evaluating plastic deformation
Metals and Materials   4(4) 755-759   1988
Comparison between Rigid-ViscoPlastic and Elastic-Plastic Finite Element Programs for Sheet Metal Forming Analysis
Proc.the Winter Annual Meeting of the ASME : Materials in Manufacturing Processes, MD-Vol.8, Edited by Kiefer, B.V, Gavigan, J.J and Ni, C.M   27-37   1988
Development of FEM for Sheet Metal Stamping
Proc.SAE Int.Cong and Expo, Detroit : Advances and Trends in Automotive Sheet Steel Stamping   (880528) 206,109-120   1988
Experience with Explicit and Implicit Finite Element Programs for Sheet Forming Analysis,
Modelling of Metal Forming Processes, Edited by Chenot, J.L. and Onate, E, Kluwer Academic Publishers   131-138   1988
Finite Element Modeling of the Punch Stretching of Square Plates,
J.Appl.Mech, Trans.ASME ( ser.E )   55 667   1988
A Finite Element Simulation of the Sheet Metal Forming Process
Int.J.Numer.Methods in Engrg   25 283-292   1988
A Finite Element Modelling of the Punch Press Forming of Sheet Metal
Proc.2nd Int.Conf on Technology of Plasticity : Advanced Technology of Plasticity 1987, Edited by Lange, K, Springer-Verlag   625-632   1987
A Finite Element Analysis of the Punch Press Forming of Thin Elastic-Plastic Plates
Proc.Int.Conf on Computational Mechanics : Computational Mechanics'86, Springer-Verlag   (III) 23-28   1986
Finite Element Modelling of the Punch Press Forming of Thin Elastic-Plastic Plates
Numerical Methods in Industrial Forming Processes : NUMIFORM86, Edited by Mattiasson, K., Samuelsson, A., Wood, R.D and Zienkiewicz, O.C, Balkema, A.A   333-338   1986

Books etc

 
次世代ヘルスケア機器の新製品開発,第4章生体情報モニタリングデバイスの開発・計測技術と応用展開 第18節 全自動自己血糖値計測用携帯型HMSの開発
NAKAMACHI Eiji (Part:Joint Work)
株式会社技術情報協会   2014   
機械工学便覧α3編「材料力学」
NAKAMACHI Eiji, 日本機械学会編 (Part:Joint Work)
日本機械学会   2005   
構造工学ハンドブック
NAKAMACHI Eiji, 矢川元基監修 (Part:Joint Work)
丸善   2004   
材料の力学
NAKAMACHI Eiji, 冨田佳宏・中井善一・上田整 (Part:Joint Work)
朝倉書店   2001   
バイオメカニクス数値シミュレーション(仲町第7章)
NAKAMACHI Eiji, 日本機械学会編
コロナ社   1999   
計算力学ハンドブック第I巻有限要素法(構造編)
NAKAMACHI Eiji, 日本機械学会編 (Part:Joint Work)
丸善   1998   
生産工学入門
NAKAMACHI Eiji, 岩田一明
森北出版   1997   
板・殻問題に対する有限要素法
NAKAMACHI Eiji
日刊工業新聞社   1997   
生体機械工学
NAKAMACHI Eiji, 日本機械学会編 (Part:Joint Work)
丸善.   1997   
デザインエンジニアリング総覧
NAKAMACHI Eiji, 竹内監修 (Part:Joint Work)
株式会社フジ・テクノシステム   1996   
Numerical Simulation of 3-D Sheet Metal Forming Processes
NAKAMACHI Eiji
1993   

Conference Activities & Talks

 
Electromagnetic-Mechanical Stimulation on PC12 for Enhancement of Nerve Axonal Extension
E. Nakamachi, K. Matsumoto, K. Yamamoto, Y. Morita, H. Sakamoto
Proc. of ICBM 2018 : 20th International Conference on Biomechanics   2018   
Development of Three-Dimensional Bio-Reactor Using Magnetic Field Stimulation to Enhance PC12 Cell Axonal Extension
Eiji Nakamachi, Ryota Sakiyama, Koji Yamamoto, Yusuke Morita, Hidetoshi Sakamoto
Poc. of ICBE 2018: 20th International Conference on Biomedical Engineering   2018   
Development of chemotherapy system using plasma activated medium to enhance PC12 axonal extension
Eiji Nakamachi, Takanobu Haccho, Hiroshi Ichikawa, Koji Yamamoto, Yusuke Morita
Proc. of ASME 2018 International Mechanical Engineering Congress & Exposition   2018   
Development of three-dimensional DC electric field stimulation bio-reactor for axonal outgrowth enhancement
Eiji Nakamachi,, Shohei Tanaka, Ryota Sakiyama, Koji Yamamoto, Yusuke Morita
Proc. of ASME 2018 International Mechanical Engineering Congress & Exposition   2018   
Development of stretch stimulation device for three-dimensional culture of PC12 cells
Eiji Nakamachi, Madoka Imura, Ryota Sakiyama, Koji Yamamoto, Yusuke Morita
Proc. of ASME 2018 International Mechanical Engineering Congress & Exposition   2018   

Research Grants & Projects

 
Piezoelectric Material Aided Electromagnetic and Mechanical Stimulation Bioreactor for Regeneration of Three Dimensional Nerve Network System
Scientific Research(B)(General)
Project Year: 2017 - 2019
生体適合圧電材料MgSiO3を用いた神経再生用力学・電磁場創生デバイスの開発
Scientific Research(B)(General)
Project Year: 2014 - 2016
Development of multi-layer lead-free piezoelectric film structure for bio-implantable actuator and energy generation device
Scientific Research(B)(General)
Project Year: 2011 - 2013

Patents

 
Piezo electric actuater and pump
特願2006-072630
Tetragonal crystal MgSiO3 fabrication method and piezoelectric device generation
特願2004-355017