J-GLOBAL         Last updated: May 27, 2019 at 18:33
Kumamoto University
Job title
Doctor of Engineering(Tokyo Institute of Technology), Master of Engineering(Tokyo Institute of Technology)

Research Areas


Academic & Professional Experience

 Professor,Faculty of Engineering,Kumamoto University
 Professor, ,Graduate School of Science and Technology(Engineering group),Kumamoto University
 Associate Professor,Tokyo Institute of Technology
 Associate Professor,Faculty of Engineering,Kumamoto University


Tokyo Institute of Technology

Awards & Honors

Mar 2017
Tanigawa Harris Award, Japan Institute of Metals
Oct 2010
IEC1906 Award, International Electrotechnical Commission

Published Papers

Mine Yoji, Katashima Shunsuke, Ding Rengen, Bowen Paul, Takashima Kazuki
SCRIPTA MATERIALIA   165 107-111   May 2019   [Refereed]
W. S. Chuang, J. C. Huang, P. H. Lin, C. H. Hsieh, Y. H. Lin, K. Takagi, Y. Mine, K. Takashima
Journal of Alloys and Compounds   772 288-297   Jan 2019
© 2018 Elsevier B.V. A promising Mg-Zn-Y alloy with the long-period stacking ordered (LPSO) second phase has been developed for about twenty years. Because the LPSO phase has the unique 18R crystal structure, particularly for its packing sequence ...
Kataoka Minami, Jeong Sang-Sun, Obara Yuzo, Yoshinaga Toru, Mine Yoji, Takashima Kazuki
GEOTECHNICAL TESTING JOURNAL   41(6) 1092-1101   Nov 2018   [Refereed]
Shinya Hosokawa, Koji Kimura, Koji Kimura, Jens Rüdiger Stellhorn, Koji Yoshida, Koji Hagihara, Hitoshi Izuno, Hitoshi Izuno, Michiaki Yamasaki, Michiaki Yamasaki, Yoshihito Kawamura, Yoshihito Kawamura, Yoji Mine, Kazuki Takashima, Hiroshi Uchiyama, Satoshi Tsutsui, Akihide Koura, Fuyuki Shimojo
Acta Materialia   146 273-279   Mar 2018
© 2018 Acta Materialia Inc. Inelastic X-ray scattering (IXS) experiments were carried out at room temperature at BL35XU of the SPring-8 on a single crystal Mg 85 Zn 6 Y 9 alloy with a synchronized long-period stacking ordered (LPSO) phase of purel...
Yin Htwe, Kwangsik Kwak, Daichi Kishi, Yoji Mine, Rengen Ding, Paul Bowen, Kazuki Takashima
Materials Science and Engineering A   715 315-319   Feb 2018
© 2018 Elsevier B.V. Micro-tensile tests on single-colony specimens of Ti–6Al–4V alloy with a fine lamellar microstructure revealed that the critical resolved shear stress of the basal slip was lower than that of the prismatic slip. This has been ...
S. Hisada, M. Matsuda, K. Takashima, Y. Yamabe-Mitarai
Journal of Solid State Chemistry   258 712-717   Feb 2018
© 2017 Elsevier Inc. We investigated the crystal structure and the martensitic transformation in equiatomic HfPd alloy. The analysis of the crystal structure by electron diffraction and Rietveld refinement using X-ray diffraction data indicates th...
Materials Transactions   59 1567-1573   Jan 2018
© 2018 Japan Institute of Metals (JIM). All rights reserved. The antiphase boundary (APB)-like structure of B33 martensite in a ZrCoPd alloy was investigated by means of conventional transmission electron microscopy and high-Angle annular dark-fie...
Daichi Kishi, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Scripta Materialia   142 1-5   Jan 2018
© 2017 Acta Materialia Inc. To study the relationship between the plasticity and intergranular fracture of FeCo intermetallic alloys, small, single- and bi-crystalline specimens were subjected to micro-tensile testing and crystal plasticity finite...
Yoji Mine, Yoji Mine, Ryo Maezono, Ryo Maezono, Tsuyoshi Mayama, Jing Wu, Yu Lung Chiu, Paul Bowen, Kazuki Takashima
Journal of Alloys and Compounds   718 433-442   Sep 2017
© 2017 Elsevier B.V.Micro-bending tests were performed on single-crystalline cantilever beams of long-period stacking ordered (LPSO) structures of Mg85Zn6Y9 alloy with and without a notch to study crystal plasticity and cracking behaviour under ba...
計測標準と計量管理   67(2) 2‐7   Aug 2017
Yoji Mine, Nobuaki Horita, Zenji Horita, Zenji Horita, Kazuki Takashima
International Journal of Hydrogen Energy      Mar 2017
© 2017 Hydrogen Energy Publications LLC.Micro-tensile tests were performed on high-pressure-torsion-processed specimens of type 304 steel with grain sizes in the range of 0.1-0.5 μm to clarify the effect of ultrafine grain refinement on the hydrog...
Shinya Ogata, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Materials Science and Engineering A   689 353-365   Mar 2017   [Refereed]
© 2017 Elsevier B.V.The influence of microstructural evolution on the strain hardening and non-uniform deformation behaviour of pre-strained ferrite-martensite DP steel was studied using a crystal plasticity finite element method (CPFEM). The mate...
M. Matsuda, R. Sago, K. Akamine, S. Tsurekawa, K. Takashima, M. Nishida
Journal of Alloys and Compounds   682 124-131   Oct 2016   [Refereed]
© 2016 Elsevier B.V. All rights reserved.We investigated the relationship between the microstructure and mechanical properties of the ternary Co50Fe50-xPdx alloys with different Pd content. Co50Fe45Pd5, Co50Fe40Pd10 and Co50Fe35Pd15 alloys anneale...
Yoji Mine, Shoki Nakamichi, Kaoru Koga, Kazuki Takashima, Oliver Kraft
Materials Science and Engineering A   675 181-191   Oct 2016   [Refereed]
© 2016 Elsevier B.V.The deformation behaviour of an Fe–19Cr–16Ni austenitic alloy was studied by micro-tensile testing of small-scale single crystals. A detailed comparison of specimens with and without nano-twins was conducted. The study revealed...
Kwangsik Kwak, Tsuyoshi Mayama, Yoji Mine, Kazuki Takashima
Materials Science and Engineering A   674 104-116   Sep 2016   [Refereed]
© 2016 Elsevier B.V.Microtensile testing with a crystal plasticity analysis was employed using single block structured specimens to elucidate the anisotropic plasticity of lath martensite steel. Habit-plane-orientation-dependent yielding occurred ...
Yoji Mine, Kaoru Koga, Kazuki Takashima, Zenji Horita, Zenji Horita
Materials Science and Engineering A   661 87-95   Apr 2016   [Refereed]
© 2016 Elsevier B.V..Micro-tensile tests were employed on a 304 metastable austenitic stainless steel to mechanically characterise the microstructures developed by processing through high-pressure torsion (HPT) with and without hydrogen pre-chargi...
Yoji Mine, Daisuke Haraguchi, Takahiro Ideguchi, Nobuaki Horita, Zenji Horita, Zenji Horita, Kazuki Takashima
ISIJ International   56 1083-1090   Jan 2016   [Refereed]
© 2016 ISIJ.The effect of hydrogen on the plasticity of ultrafine-grained austenite was studied on type 304, 316L, and 310S stainless steels processed by high-pressure torsion at moderate temperature. Like austenitic steels with ordinary grain siz...
Takashi Ito, Takashi Ito, Yoji Mine, Masaaki Otsu, Kazuki Takashima
Materials Transactions   57 1252-1256   Jan 2016   [Refereed]
© 2016 The Japan Institute of Metals and Materials.A scanning white-light interferometry (SWLI) technique was used to image the surface topography and measure the in-plane strain in micrometre-sized structures subjected to uniaxial tensile deforma...
Shinya Ogata, Yoji Mine, Kazuki Takashima, Takahito Ohmura, Hiroshi Shuto, Tatsuo Yokoi
Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan   102 260-267   Jan 2016   [Refereed]
The deformation behavior of inhomogeneous microstructures developed by pre-straining was studied by micro-tensile testing to elucidate the cause of low hole expandability of ferrite-martensite dual-phase (DP) steels. Slip bands developed in the fe...
Shinya Ogata, Yoji Mine, Kazuki Takashima, Takahito Ohmura, Hiroshi Shuto, Tatsuo Yokoi
ISIJ International   56 2084-2092   Jan 2016   [Refereed]
© 2016 ISIJ.The deformation behavior of inhomogeneous microstructures developed by pre-straining was studied by micro-tensile testing to elucidate the cause of low hole expandability of ferrite-martensite dual-phase (DP) steels. Slip bands develop...


鄭玉峰, 阮立群, 高島和希
日本金属学会講演概要(CD-ROM)   163rd ROMBUNNO.144   Sep 2018
ZHENG Yufeng, RUAN Liqun, 高島和希
日本バイオマテリアル学会大会予稿集(Web)   40th 225 (WEB ONLY)   2018
高島和希, 峯洋二, 大津雅亮
塑性と加工   56(657) 840-844 (J-STAGE)   2015
前薗亨, 峯洋二, 山崎倫昭, 河村能人, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014 C8   2014
黒田晃斗, 峯洋二, 高島和希, 堀田善治
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014 P6   2014
品川嘉勝, 佐護隆太郎, 佐護隆太郎, 松田光弘, 連川貞弘, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014 P66   2014
岸大地, 松田光弘, 連川貞弘, 高島和希
日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集   2014 P65   2014
Mechanical Engineering Congress, Japan   2013 "W012002-1"-"W012002-2"   Sep 2013
Micro-sized specimens were prepared from an LPSO phase of a directionally solidified Mg-Zn-Y alloy and the tensile properties of the LPSO phase were examined by using the micro-mechanical characterization technique. A directionally solidified Mg_<...
高島和希, 峯洋二
日本機械学会年次大会講演論文集(CD-ROM)   2013 ROMBUNNO.W012002   Sep 2013
田中武勇樹, 松田光弘, 連川貞弘, 高島和希, 赤嶺大志, 光原昌寿, 西田稔
日本金属学会講演概要(CD-ROM)   153rd ROMBUNNO.343   Sep 2013

Books etc

Thin Films - Stresses & Mechanical Properties XI ( Vol. 875)

Conference Activities & Talks

松下彩, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2019   
池部由樹子, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Mar 2019   
眞山剛, 峯洋二, 高木康介, 高島和希
軽金属学会大会講演概要   10 Oct 2018   
高木康介, 眞山剛, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   5 Sep 2018   
池部由樹子, 峯洋二, 高島和希
日本金属学会講演概要(CD-ROM)   5 Sep 2018   
植木翔平, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2018   
松崎悠弥, 峯洋二, 高島和希
材料とプロセス(CD-ROM)   1 Sep 2018   
高木康介, 峯洋二, 高島和希
軽金属学会大会講演概要   26 Apr 2018   
峯洋二, 松村卓哉, 森戸茂一, 高島和希
日本金属学会講演概要(CD-ROM)   5 Mar 2018   
松永遼太, 峯洋二, 高島和希, 大石勝彦, 上野友典
日本金属学会講演概要(CD-ROM)   5 Mar 2018