IKUTA Akihiko

J-GLOBAL         Last updated: Sep 9, 2019 at 18:56
 
Avatar
Name
IKUTA Akihiko
Affiliation
Kindai University
Section
Faculty of Engineering, Department of Mechanical Engineering
Job title
Associate Professor
Degree
Engineering Doctor(Hiroshima University), Engineering Master(University of the Ryukyus)
Research funding number
70330321

Research Areas

 
 

Academic & Professional Experience

 
2002
 - 
2007
Assistant Professor,School of Engineering, Kinki University
 
2007
   
 
- Associate Professor,School of Engineering, Kinki University
 
2000
 - 
2002
Research Associate,School of Engineering, Kinki University
 

Education

 
 
 - 
2000
Graduate School, Division of Engineering, Hiroshima University
 
 
 - 
1992
Faculty of Engineering, University of the Ryukyus
 

Published Papers

 
Change of material properties by casting and influences on machinability
IKUTA Akihiko
Journal of the Japan Society for Abrasive Technology   63(9) 2-5   Sep 2019   [Invited]
Fundamental Study on Technological Method to Improve Tool Life on Friction Stir Welding by Tool Design
IKUTA Akihiko
Journal of the Japan Welding Society   88(3) 22-27   Apr 2019   [Invited]
Cutting characteristics of duplex stainless cast steel X2CrNiMoN25-7-3
HAGINO Masahiro, TAKEMURA Akihiro, FUJITA Tsuyoshi, USUKI Hiroshi, IKUTA Akihiko
Journal of Mechanics Engineering and Automation   7(6) 300-306   Jan 2018   [Refereed]
Production of Cemented Carbide-Alumina Composite Material by Wet-Shaping Process
IKUTA Akihiko, KYOGOKU Hideki, SUZUKI Hiroyuki
Key Engineering Materials   749 199-204   Aug 2017   [Refereed]
Effects of nitriding and nitrocarburizing on the fatigue properties of ductile cast iron
IKUTA Akihiko
International Journal of Metalcasting   11(1) 52-60   Jan 2017   [Refereed]
IKUTA Akihiko, HATATE Minoru, NOBUKI Thoru
Materials Transactions   57(9) 1575-1580   Sep 2016   [Refereed]
IKUTA Akihiko, HATATE Minoru, NOBUKI Thoru
Materials Transactions   57(8) 1339-1344   Aug 2016   [Refereed]
A. Ikuta, H. Kyogoku, H. Suzuki
Key Engineering Materials   656 86-91   May 2015   [Refereed]
Influence of Tool Thread on Mechanical Properties of Dissimilar Al Alloy Friction Stir Spot Welds
A. Ikuta, Y.H. Yin, T.H. North
Science and Technology of Welding & Joining   17(8) 622-629   Nov 2012   [Refereed]
Y.H. Yin, A. Ikuta and T.H. North
Materials and Design   31(10) 4764-4746   Aug 2010   [Refereed]
A. Ikuta, K. Shinozaki, H. Masuda, Y. Yamane, H. Kuroki and Y. Fukaya
Journal of Materials Processing Technology   127(2) 251-255   May 2002   [Refereed]
Residual Stress Analysis in Ceramics/Metal Bonded Material
Y. Fukaya, Y. Okumoto, A. Ikuta and H. Yoshikawa
Research Reports of the Faculty of Engineering, Kinki University   35 25-33   Dec 2001
H. Yara, A. Ikuta and K. Kotake
Corrosion Engineering   43(11) 711-719   Jul 1994

Misc

 
Slipping Wear Resistant Characteristics of Sprayed Coating
H. Yara and A. Ikuta
Research Reports of the Faculty of Engineering, University of the Ryukyus   45 1-11   1993
H. Yara, A. Ikuta and D. Fujiki
Quarterly Journal of the Japan Welding Society   11(4) 474-478   1993
H. Yara and A. Ikuta
Quarterly Journal of the Japan Welding Society   12(2) 186-191   1994
Joining Cast Iron to Cast Iron and Cast Iron to Carbon Steel with Sprayed Coating Method
H. Yara and A. Ikuta
Journal of High Temperature Society   20(Supplement) 319-326   1994
H. Yara and A. Ikuta
Quarterly Journal of the Japan Welding Society.   13(2) 223-227   1995
A Study on Joining Characteristics of Cast Iron/Carbon Steel Clad using Spray Coated Insert by Casting Process
H. Yara, A. Ikuta and K. Kuniyoshi
Journal of Japan Thermal Spraying Society   32(2) 1-6   1995
H. Yara and A. Ikuta
Quarterly Journal of the Japan Welding Society   13(4) 540-543   1995
K. Shinozaki, A. Ikuta, H. Masuda, Y. Yamane, H. Kuroki, M. Aritoshi and Y. Fukaya
Journal of the Japan Society for Precision Engineering   66(2) 224-228   2000
K. Shinozaki, A. Ikuta, H. Masuda, Y. Yamane, H. Kuroki and Y. Fukaya
Journal of the Japan Society for Precision Engineering   66(3) 414-418   2000
A. Ikuta, K. Shinozaki, H. Masuda, H. Kuroki, Y. Yamane and Y. Fukaya
Quarterly Journal of the Japan Welding Society   18(2) 280-287   2000
Y. Fukaya, Y. Okumoto, A. Ikuta, H. Kuroki, K. Shinozaki and T. Kobayashi
Quarterly Journal of the Japan Welding Society   19(2) 336-344   2001
Y. Fukaya, A. Ikuta, K. Iwanishi, Y. Takahashi, Y. Yamane, Y. Higashi and T. Kobayashi
Quarterly Journal of the Japan Welding Society   20(2) 207-212   2002
A. Ikuta, K. Shinozaki, H. Masada, Y. Yamane, H. Kuroki, M. Aritoshi and Y. Fukaya
Journal of the Japan Society for Precision Engineering   68(6) 838-843   2002
Sintering Properties of Alumina Ceramics Using the Wet-shaping Proces
A. Ikuta, Y. Fukaya Y. Yamaguchi and H. Suzuki
Research Reports of the Faculty of Engineering, Kinki University   37 35-42   2003
Y. Fukaya, A. Ikuta, T. Ihara, M. Ando and T. Kobayashi
Quarterly Journal of the Japan Welding Society   22(1) 149-155   2004
Y. Fukaya, A. Ikuta, T. Ihara, M. Ando, Y. Nakagiri and T. Kobayashi
Quarterly Journal of the Japan Welding Society   22(1) 156-162   2004
Thermodynamics Calculation of the Reaction Phases in Adhesion Interface at the Cutting
A. Ikuta, Y. Fukaya, K. Shinozaki and H. Kuroki
Research Reports of the Faculty of Engineering, Kinki University   38 51-56   2004
Trial Production of Composite-gradient Ceramics Tool Using the Wet-shaping Process
A. Ikuta, Y. Fukaya, Y. Yamaguchi and H. Suzuki
Research Reports of the Faculty of Engineering, Kinki University   38 57-62   2004
Materials Study on Adhesion Phenomenon in Cutting Process
A. Ikuta and K. Shinozaki
Journal of High Temperature Society   32(3) 151-159   2006
A. Ikuta, Y. H. Yin and T. H. North
Quarterly Journal of the Japan Welding Society   28(3) 346-354   2010
Properties of Chipping in Alumina Tools Made Using Wet-shaping Process
A. Ikuta, Y. Fukaya, H. Kyogoku and H. Suzuki
Research Reports of the Faculty of Engineering, Kinki University   44 25-30   2010
Properties of Chipping in Alumina Tools Made Using Wet-shaping Process
A. Ikuta, Y. Fukaya, H. Kyogoku and H. Suzuki
Research Reports of the Faculty of Engineering, Kinki University   44 25-30   2010

Conference Activities & Talks

 
Butt Joints Made Using Friction Stir Welding to Keep up Thickness of Thin Sheet
Akihiko Ikuta and Toshimasa Saeki
Apr 2019   
Cutting characteristics of duplex stainless cast steel X2CrNiMoN25-7-3
HAGINO Masahiro, TAKEMURA Akihiro, FUJITA Tsuyoshi, USUKI Hiroshi, IKUTA Akihiko
The 9th International Conference on Leading Edge Manufacturing in 21st Century   Nov 2017   
Production of Cemented Carbide-Alumina Composite Material by Wet-shaping Process
IKUTA Akihiko, KYOGOKU Hideki, SUZUKI Hiroyuki
2016 International Conference on Machining, Materials and Mechanical Technology   Oct 2016   
Production Processes and Characteristics of Porous Alumina
IKUTA Akihiko, KYOGOKU Hideki, SUZUKI Hiroyuki
2014 International Conference on Machining, Materials and Mechanical Technology   Sep 2014   
Characteristics of Dissimilar Al-alloys Friction Stir Spot Welds Made Using Three-flat Tools
Inter-University Research Seminar 2011   Aug 2011   
Role of Tool Thread in Friction Stir Spot Welding
The First East Asia Symposium of Welding and Joining   Jun 2011   
Factors Determining Failure Strength Properties of Friction Stir Spot Welds
International Conference on Welding and Joining of Materials 2010   Aug 2010   
Direct Selective Laser Melting of Aluminum Alloy
2010 International Symposium on Flexible Automation   Jul 2010   
Microstructure and Mechanical Properties of AZ31 Friction Stir Spot Welds
The 3th Inter-University Research Seminar   May 2010   
Friction Stir Spot Welding of AM60 and AZ31 Mg-alloy Sheets
The 3th Inter-University Research Seminar   May 2010   
Examination by Modeling on Cutting Temperature of the Titanium Alloys
8th International Conference on Progress of Machining Technology   Nov 2006   
Fundamental Examination of Sintering Properties in Alumina Ceramics by the Wet-shaping Process
Mar 2006   
Sintering Properties of Alumina, Alumina-Titanium Carbide and Alumina-Titanium Carbonitride Ceramics
Mar 2006   
Examination of Cutting Temperature by Friction Welding Model
Mar 2006   
Heat Conduction Analysis of Cutting Temperature in a Short-time and Micro-area by the FEM
Mar 2005   
Heat Conduction Analysis of Temperature in the Friction Bonding Interface
Sep 2004   
Development of the Ceramics Tool Using the Wet-shaping Process(1st Report)
Oct 2003   
Bondability of Titanium Alloys to Cemented Carbide Tool During Cutting Process
Japan Welding Society7th International Welding Symposium   Nov 2001   Japan Welding Society
Tool Damage by Adhesion of Difficult-to-Machine Materials During Cutting Process [Invited]
Jul 2001   
A New Approach to Make the Adhesion Mechanism during Machining of Difficult to Machine Materials (5th Report)
Mar 2001   
Consideration on Adhesion Mechanism of Ti Allays Using Cemented Carbide Tool During Cutting Process
International Conference on Precision Engineering 2000   Mar 2000   The Japan Society for Precision Engineering
Fatigue Strength of Partially Thermal Sprayed Materials under Corrosive Enviroment
The International Society of Offshore and Polar Engineers   Sep 1997   The International Society of Offshore and Polar Engineers
Study on the Bonding Characteristics of Self-Fluxing Alloys in Spray and Cast Composite Materials
High Temperature Society of JapanThe 14th International Thermal Spray Conference   May 1995   High Temperature Society of Japan

Research Grants & Projects

 
Development of the ceramics tools using the new approach processing
Clarification of the adhesion mechanism during cutting difficult-to-machining materials
Research on Adhesion Mechanism of Difficult-to-Machine Materials