Two-dimensional axisymmetric numerical simulation reproduced flames with repetitive extinction and ignition (FREI) in a micro flow reactor with a controlled temperature profile with a stoichiometric n-heptane/air mixture, which have been observed in the experiment. The ignition of hot flame occurred from consumption reactions of CO that was remained in the previous cycle of FREI. Between extinction and ignition locations of hot flames, several other heat release rate peaks related to cool and blue flames were observed for the first time. After the extinction of the hot flame, cool flame by the low-temperature oxidation of n-heptane appeared first and was stabilized in a low wall temperature region. In the downstream of the stable cool flame, a blue flame by the consumption reactions of cool flame products of CH2O and H2O2 appeared. After that, the hot flame ignition occurred from the remaining CO in the downstream of the blue flame. Then after the next hot flame ignition, the blue flame was swept away by the propagating hot flame. Soon before the hot flame merged with the stable cool flame, the hot flame propagation was intensified by the cool flame. After the hot flame merged with the stable cool flame, the hot flame reacted with the incoming fresh mixture of n-C7H16 and O-2. (C) 2020 The Authors. Published by Elsevier Inc. on behalf of The Combustion Institute.