NISHIWAKI Shinji

J-GLOBAL         Last updated: Jun 22, 2018 at 11:41
 
Avatar
Name
NISHIWAKI Shinji
Affiliation
Kyoto University
Section
Graduate School of Engineering
Job title
Associate Professor
Degree
Doctor of Philosophy(University of Michigan), Master of Engineering(Kyoto University)

Research Areas

 

Education

 
 
 - 
1998
Department of Mechanical Engineering, University of Michigan
 
 
 - 
1988
Department of Precision Engineering, Faculty of Engineering, Kyoto University
 

Committee Memberships

 
2002
   
 
Japan Soceity of Mechanical Engineers  Secretary of Design and System Engineeirng Divison
 

Published Papers

 
Nishi, S., Terada, K., Kato, J., Nishiwaki, S., and Izui,
International Journal for Numerical Methods in Engineering   Vol.113 pp.1164-1188   2018   [Refereed]
Noguchi, Y., Yamada, T., Izui, K., and Nishiwaki, S.
Computer Methods in Applied Mechanics and Engineering, Vol. 335(2018), pp. 419-471.   Vol.335 pp.419-471   2018   [Refereed]
A Heuristic Approach for Actuator Layout Designs in Deformable Mirror Devices Based on Current Value Optimization
Yamaki, Y., Sato, Y., Izui, K., Yamada, T., Nishiwaki, S., Hirai, Y., and Tabata, O.
Structural and Multidisciplinary Optimization   accepted    2018   [Refereed]
Furuta, K., Sato, A., Izui, K., Matsumoto, M., Yamada, T., and Nishiwaki, S.
Vol.12(No.1) Paper No.17-00400,JAMDSM0003   2018   [Refereed]
Seong, H. K., Shin, H., Yoo, J., Yamada, T., and Nishiwaki, S.
Finite Elements in Analysis and Design, Vol.140 (2018), pp.84-95.   Vol.140 pp.84-95   2018   [Refereed]
Miyata, K., Noguchi, Y., Yamada, T., Izui, K., and Nishwiaki, S.
Computer Methods in Applied Mechanics and Engineering, Vol.331 (2018), pp.116-137.   Vol.331 PP.116-137   2018   [Refereed]
An Optimum Design Method for a Thermal-fluid Device Incorporating Multiobjective Topology Optimization
Sato, Y., Yaji, K., Izui, K., Yamada, T., and Nishiwaki, S.
Journal of Mechanical Design   Vol.140(Issue 3) No.031402   2018   [Refereed]
Orthotropic Material Orientation Optimization Method in Composite Laminates
Petrovic, M., Nomura, T., Yamada, T., Izui, K., and Nishiwaki, S.
Structural and Multidisciplinary Optimization, Vol. 57(2018), pp. 815-828.   Vol.57 pp.815-828   2018   [Refereed]
Noguchi, Y., Yamada, T., Izui, K., and Nishiwaki, S.
International Journal for Numerical Methods in Engineering, Vol. 113(2018), pp. 1130-1339.   Vol.113 P.1130-1339   2018   [Refereed]
Multi-objective Optimization of Magnetic Actuator Design Using Adaptive Weight Determination Scheme
Ryu, N., Lim, S., Min, S., Izui, K., and Nishiwaki, S.
IEEE Transactions on Magnetics   Vol.113 pp.1164-1188   2018   [Refereed]
Level Set-based Topology Optimization for the Design of a Peltier Effect Thermoelectric Actuator
Furuta, K., Izui, K., Yaji, K., Yamada, T., and Nishiwaki, S.
Structural and Multidisciplinary Optimization   Vol. 55 pp. 1671-1683   2017   [Refereed]
A bi-level multiobjective optimizatio approach for layout design of robotic cellular manufacturing systems
Izui, K., Bai, X., Yamada, T., Nishiwaki, S., Noda, A., and Nagatani, T.
Proceedings of the 45th International Conference on Computers & Industrial Engineering   October 28-30(Metz,France) No.175   Oct 2017   [Refereed]
Topology Optimization of Hyperbolic Metamaterials for an Optical Hyperlens
Otomori, M., Yamada, T., Izui, K., Nishiwaki, S., and Andkjær, J.
Structural and Multidisciplinary Optimization   Vol. 55 pp. 913-923   2017   [Refereed]
A Formulation for Optimal Design Problem of Compliant Displacement Magnification Mechanisms Based on Effective Energy Concept
Yamada, T., Izui, K., and Nishiwaki, S.
Mechanical Engineering Letters   Vol.3 P.17-00453   2017   [Refereed]
Noguchi, Y., Yamamoto, T., Yamada, T., Izui, K., and Nishiwaki, S.
Journal of Sound and Vibration, pp. 15–30.   Vol.404 PP.15-30   2017   [Refereed]
Kishimoto, N., Izui, K., Nishiwaki, S., and Yamada, T.
Applied Physics Letters, Vol.110 (2017), 201104.   Vol110(201104)    2017   [Refereed]
レベルセット法に基づく複数材料を対象としたトポロジー最適化
NISHIWAKI Shinji
Vol.83(No. 849) 17-00069   2017   [Refereed]
Chen, C., Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
Mechanical Engineering Journal   Vol. 4(No.3) p.17-00120   2017   [Refereed]
Topology Optimization of a No-moving-part Valve Incorporating Pareto Frontier Exploration
Sato, Y., Yaji, K., Izui, K., Yamada, T., and Nishiwaki, S.
Structural and Multidisciplinary Optimization   Vol. 56 pp.839-851   2017   [Refereed]
Lim, S., Min, S., Izui, K., and Nishiwaki, S.
IEEE Transactions on Magnetics   Vol. 53(Issue 6) TMAG.2017.2658665   2017   [Refereed]
Ryu, N., Lim, S., Min, S., Izui, K., and Nishiwaki, S.
IEEE Transactions on Magnetics   Vol. 53(Issue 6) TMAG.2017.2663760   2017   [Refereed]
Manufacturability Evaluation for molded Parts Using Fictitious Physical Models
Sato, Y., Yamada, T., Izui, K., and Nishiwaki, S.
International Journal of Advanced Manufacturing Technology   Vol. 92(No.1) pp.1391-1409   2017   [Refereed]
A Level Set-based Topology Optimization Method for Optimal Manifold Designs with Flow Uniformity in Plate-type Microchannel Reactors
Kubo, S., Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
Structural and Multidisciplinary Optimization   Vol. 55 pp.1311-1327   2017   [Refereed]
Pareto Frontier Exploration in Multiobjective Topology Optimization Using Adaptive Weighting and Point Selection Schemes
Sato, Y., Izui, K., Yamada, T., and Nishiwaki, S.
Structural and Multidisciplinary Optimization,   Vol.55 pp.409-422   2017   [Refereed]
Yaji, K., Otomori, M., Yamada, T., Izui, K., Nishiwaki, S., and Pironneau, O.
Structural and Multidisciplinary Optimization   Vol.54(No.3) 1-14   2016   [Refereed]
Noguchi, Y.,Yamada, T., Otomori, M., Izui, K., and Nishiwaki, S.
Applied Physics Letters   Vol. 107(No. 221909)    2016   [Refereed]
Pareto Frontier Exploration in Multiobjective Topology Optimization Using Adaptive Weighting and Point Selection Schemes
Sato, Y., Izui, K., Yamada, T., and Nishiwaki, S.
Structural and Multidisciplinary Optimization      2016   [Refereed]
Suemitsu, I., Izui, K., Yamada, T., Nishiwaki, S., Noda, A., and Nagatani, T.
Computers & Industrial Engineering      2016   [Refereed]
Robust Topology Optimization of Thin Plate Structure under Concentrated Load with Uncertain Load Position
Nakazawa, Y., Kogiso, N., Yamada, T., and Nishiwaki, S.
Journal of Advanced Mechanical Design, Systems, and Manufacturing (Design & Systems)      2016   [Refereed]
Topological Derivative for an Acoustic-Elastic Coupled System Based on Two-Phase Material Model
Noguchi, Y., Yamada, T., Yamamoto, T., Izui, K., and Nishiwaki, S.
Mechanical Engineering Letters   Vol.2 p.16-00246   2016   [Refereed]
A Geometrical Constraint in Topology Optimization to Achieve a Shield-like Feature Using a Fictitious Physical Model
Sato, A., Yamada, T. Izui, K., and Nishiwaki, S.
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 1B1-4   2016   [Invited]
Noguchi, Y., Yamada, T., Otomori, M., Izui, K., and Nishiwaki, S.
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 2A1-3   2016   [Invited]
Level Set-based Topology Optimization Method for the Design of an Electromagnetic Metasurface to Manipulate Light Polarization
Takahashi, H., Yamada, T., Nishiwaki, S., Izui, K., and Ishi, S.
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 2A2-3   2016   [Invited]
Level Set-based Topology Optimization for Thermoelectric Devices
Furuta, K., Orii, M., Izui, K., Yamada, T., and Nishiwaki, S.
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 2A2-5   2016   [Invited]
A Shape Ooptimization Method Based on the Convected Level Set Method and Its Application for the Design of a Spectrally Selective Emitter for Thermophotovoltaic Generation
Orii, M., Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 2A3-2   2016   [Invited]
Level set-based Topology Optimization Considering Maximum Length Scale Constraints
Sato, Y., Kishimoto, N., Izui, K., Yamada, T., and Shinji Nishiwaki
1st Asian Congress of Structural and Multidisciplinary Optimization 2016 (ACSMO 2016)   May 22-26, 2016, Nagasaki(Japan) 3B2-3   2016   [Invited]
Level set-based Topology Optimization Method for Fluid Problem Incorporating with an Immersed Boundary Method
Kubo, S., Koguchi, A., Yaji, K., Yamada, T., Izui, K., Nishiwaki, S.
1st Asian Congress of Structural and Multidisciplinary Optimization (ACSMO2016)   May 22-26, 2016, Nagasaki(Japan) No.3A2-2   2016   [Invited]
Anisotropic Material Orientation Optimization Method in Composite Laminates
Petrovic, M., Nomura, T., Yamada, T., Izui, K., and Nishiwaki, S.
7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS2016)   June 5-6, 2016, Crete Island,(No.6338)    2016   [Invited]
A New Topology Optimization Method and Its Application to Innovative Structure and Material Designs
Nishiwaki, S., Yamada, T., and Izui, K.
7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS2016)   June 5-6, 2016, Crete Island,(No.12410)    2016   [Invited]
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., and Nishiwaki, S.
Journal of Computational Physics   Vol.307 pp.355-377   2016   [Refereed]
Robust Topology Optimization of Thin Plate Structure under Concentrated Load with Uncertain Load Point
Nakazawa, Y., Kogiso, N., Yamada, T., and Nishiwaki, S.
Journal of Advanced Mechanical Design, Systems, and Manufacturing (Design & Systems)   Vol.10(No.4) p.JAMDSM0057   2016   [Refereed]
Izui, K.., Yamda, T., Nishiwaki, S., and Tanaka, K.
Structural and Multidisciplinary Optimization, Vol. 51, No. 1(2015)   173-182   2015   [Refereed]
Kotani, T., Yamada, T., Yamasaki, S., Ohkado, M., Izui, K., and Nishiwaki, S.
Structural and Multidisciplinary Optimization, Vol.51, No.2(2015)   369-383   2015   [Refereed]
Otomori, M., Yamada, T, Izui, K., and Nishiwaki, S.
Structural and Multidisciplinary Optimization, Vol. 51(2015)   1159-1172   2015   [Refereed]
Yaji, K., Yamada, T., Kubo, S., Izui, K., and Nishiwaki, S.
International Journal of Heat and Mass Transfer, Vol. 81(2015)   878-888   2015   [Refereed]
Yamamoto, T., Yamada, T., Izui, K., and Nishiwaki, S.
Journal of Sound and Vibration   Vol.25 pp.84-96   2015   [Refereed]
Gradient-based Multiobjective Optimization Based on Distance Constraints and Point Replacement
Sato, Y., Izui, K., Yamada, T., and Nishiwaki, S.
Engineering Optimization   Vol.XX pp.1-25   2015   [Refereed]
Noguchi, Y.,Yamada, T., Otomori, M., Izui, K., and Nishiwaki, S.
Applied Physics Letters   107(22) No.221909   2015   [Refereed]
A Study of Frequency Dependence in Level Set-based Topology Optimization for the Design of Wave Motion Converter in an Acoustic-elastic Coupled System
Noguchi, Y., Yamada, T., Otomori, M., Izui, K., and Nishiwaki, S.
The 6th International Conference on Computational Methods, 14-27 July 2015, Auckland, New Zealand   (No.862)    2015   [Refereed][Invited]
Level Set-based Topology Optimization of Heat Control Devices
Okamoto, S., Yamada, T., Izui, K., and Nishiwaki, S.
The 6th International Conference on Computational Methods, 14-27 July 2015, Auckland, New Zealand   (No.1342.)    2015   [Refereed][Invited]
A multiobjective topology optimization method for Tesla valve design
Sato, Y., Yaji, K., Izui, K., Yamada, T., and Nishiwaki, S.
The 3rd International Workshops on Advances in Computational Mechanics October 12-14, 2015, Tokyo, Japan      2015   [Invited]
Efficient gradient-based multiobjective search algorithm for topology optimization
Sato, Y., Izui, K., Yamada, T., and Nishiwaki, S.
KSME-JSME Joint Symposium on CM & CAE 2015, October 26, 2015, Tokyo, Japan      2015   [Invited]
Otomori, M., Yamada, T., Izui, K., Nishiwaki, S., and Kogiso, N.
IEEE Transactions on Magnetics   Vol.50(No.2) No.7018004   2015   [Refereed]
Optimum design of periodic microstructures for minimal dispersive effects in wave propagation
Yamada, T., Allaire, G., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), 7-12 June, 2015, Sydney, Australia   (No.1058)    2015   [Refereed][Invited]
Otomori, M., Yamada, T., Izui, K., Nishiwaki, S., and Kogiso, N.
IEEE Transactions on Magnetics, Vol.50, No. 2 (2014), No.7018004      2014   [Refereed]
Matsuki, T., Yamada, T., Izui, K., and Nishiwaki, S.
Applied Physics Letters, Vol.104 (2014), No.191905      2014   [Refereed]
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., and Nishiwaki, S.
Journal of Computational Physics, Vol. 274(2014)   158-181   2014   [Refereed]
Lu, L., Otomori, M., Yamada, T., Yamamoto, T., Izui, K., and Nishiwaki, S.
Bulletin of the JSME Mechanical Engineering Journal, Vol.1, No.4 (2014), p. DSM0040   Vol.1(No.4) p.DSM0040   2014   [Refereed]
Choi, J. S., Yamada, T., Izui, K., Nishiwaki, S., Lim, H., and Yoo, J.
The International Journal for Computation and Mathematics in Electrical and Electronic Engineering (COMPEL), Vol. 33   33(3) 1-20   2014   [Refereed]
M. Ohkado; T. Nomura; S. Yamasaki; A. Kawamoto; S. Nishiwaki
Structural and Multidisciplinary Optimization   Vol.50 465-474   2014   [Refereed]
T.H. Nguyen; H. Morishita; Y. Koyanagi; K. Izui; S. Nishiwaki
IEEE Transactions on Antennas and Propagation   62(1) 206-215   2014   [Refereed]
L. Lu; T. Yamamoto; M. Otomori; T. Yamada; K. Izui; S. Nishiwaki
Finite Elements in Analysis and Design   72 10-12   Sep 2013   [Refereed]
M. Otomori; T. Yamada; J. Andkjaer; K. Izui; S. Nishiwaki; N. Kogiso
IEEE Transactions on Magnetics   49(5) 2081-2084   May 2013   [Refereed]
K. Izui; Y. Murakumo; I. Suemitsu; S. Nishiwaki; A. Noda; T. Nagatani
Computers and Industrial Engineering   64(2) 537-544   Feb 2013   [Refereed]
Nguyen, T. H., Morishita, H., Koyanagi, Y., Izui, K., Nishiwaki, S.
IEICE Communications Express, Vol. 2 No. 8(2013)   365-371   2013   [Refereed]
Yamada, T., Manabe, M., Izui, K., and Nishiwaki, S.
Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol.7, No.4 (2013)   630-643   2013   [Refereed]
T. Kotani; S. Yamasaki; T. Yamada; M. Ohkado; K. Izui; S. Nishiwaki
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   79(805) 3234-3247   2013   [Refereed]
M. Otomori; T. Yamada; K. Izui; S. Nishiwaki; N. Kogiso
Transactions of the Japan Society for Computational Engineering and Science   2013    2013   [Refereed]
K. Yaji; T. Yamada; M. Yoshino; T. Matsumoto; K. Izui; S. Nishiwaki
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   79(802) 2152-2163   2013   [Refereed]
N. Kogiso; H. Horio; M. Otomori; T. Yamada; S. Nishiwaki
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   79(802) 2233-2237   2013   [Refereed]
M. Otomori; L. Lu; T. Yamada; T. Yamamoto; K. Izui; S. Nishiwaki
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   79(802) 2138-2151   2013   [Refereed]
A. Kawamoto; T. Matsumori; T. Nomura; T. Kondoh; S. Yamasaki; S. Nishiwaki
International Journal for Numerical Methods in Engineering   93(8) 795-817   2013   [Refereed]
Perspectives on Design Creativity and Innovation Research
NISHIWAKI Shinji
International Journal of Design Creativity and Innovation   Vol.1(Issue1) pp.1-42   2013   [Refereed]
Otomori, M., Yamada, T., Izui, K., Nishiwaki, S. and Kogiso, N.
IEEE Transactions on Magnetics, Vol. 48, No. 11(2012)   48(11) 3072-3075   Nov 2012   [Refereed][Invited]
J.S. Choi; K. Izui; S. Nishiwaki
IEEE Transactions on Magnetics   48(11) 3579-3582   Nov 2012   [Refereed]
J.S. Choi; K. Izui; S. Nishiwaki; A. Kawamoto; T. Nomura
Structural and Multidisciplinary Optimization   46(3) 445-455   Sep 2012   [Refereed]
T. Matsushima; K. Izui; S. Nishiwaki
Journal of Mechanical Design, Transactions of the ASME   134(6) 1-14   Jun 2012   [Refereed]
Tenne, Y., Izui, K., and Nishiwaki, S.
International Journal of Systems Science, Vol. 43, No. 7(2012)   1305-1321   2012   [Refereed]
Hung, N. T., Morishita, H., Koyanagi, Y., Izui, K., and Nishiwaki, S.
IEICE Communications Express, Vol. 1, No. 3(2012)   89-94   2012   [Refereed]
Inverse Design of Dielectric Materials by Topology Optimizations
Otomori, M., Andkjær, J., Sigmund, O, Izui, K., and, Nishiwaki S.
Progress in Electromagnetics Research, Vol. 127 (2012)   93-120   2012   [Refereed]
Choi, J. S., Izui, K., and Nishiwaki, S.
, IEEE Transactions on Magnetics, Vol. 48, No. 11(2012)   3579-3582   2012   [Refereed]
Optimum design of metallic patch antennas based on topology optimization
S. Tsukamoto; K. Izui; M. Otomori; M. Ohkado; T. Nomura; S. Nishiwaki
Transactions of the Japan Society for Computational Engineering and Science   2012 3-   2012   [Refereed]
Cutting path design to minimizeworkpiece displacement at cutting point: Milling of thin-walled parts
Y. Koike; A. Matsubara; S. Nishiwaki; K. Izui; I. Yamaji
International Journal of Automation Technology   6(5) 638-647   2012   [Refereed]
Inverse design of dielectric materials by topology optimization
M. Otomori; J. Andkjær; O. Sigmund; K. Izui; S. Nishiwaki
Progress in Electromagnetics Research   127 93-120   2012   [Refereed]
K. Ueda; M. Otomori; N. Kogiso; T. Yamada; S. Nishiwaki
Nihon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C   78(787) 928-942   2012   [Refereed]
Y. Tenne; K. Izui; S. Nishiwaki
Artificial Life and Robotics   16(4) 546-550   2012   [Refereed]
Y. Tenne; K. Izui; S. Nishiwaki
International Journal of Systems Science   43(7) 1305-1321   2012   [Refereed]
M. Otomori; T. Yamada; K. Izui; S. Nishiwaki; J. Andkjær
Computer Methods in Applied Mechanics and Engineering   237 192-211   2012   [Refereed]
Choi, J. S., Izui, K., Nishiwaki, S., Kawamoto, A., and Nomura, T.
I IEEE Transactions on Magnetics, Vol. 47, No. 10(2011)   47(10) 3024-3027   Oct 2011   [Refereed][Invited]
S. Yamasaki; T. Nomura; A. Kawamoto; K. Sato; S. Nishiwaki
International Journal for Numerical Methods in Engineering   87(9) 844-864   Sep 2011   [Refereed][Invited]
A. Kawamoto; T. Matsumori; S. Yamasaki; T. Nomura; T. Kondoh; S. Nishiwaki
Structural and Multidisciplinary Optimization   44(1) 19-24   Jul 2011   [Refereed]
K. Hirayama; Y. Tsuji; S. Yamasaki; S. Nishiwaki
IEICE Transactions on Electronics   E94C(5) 874-881   May 2011   [Refereed]
S. Lim; T. Yamada; S. Min; S. Nishiwaki
IEEE Transactions on Magnetics   47(5) 1318-1321   May 2011   [Refereed]
H. Iwai; A. Kuroyanagi; M. Saito; A. Konno; H. Yoshida; T. Yamada; S. Nishiwaki
Journal of Power Sources   196(7) 3485-3495   Apr 2011   [Refereed]
T. Yamada; S. Yamasaki; S. Nishiwaki; K. Izui; M. Yoshimura
Journal of Computing and Information Science in Engineering   11(1)    Mar 2011   [Refereed][Invited]
T. Yamada; K. Izui; S. Nishiwaki
Journal of Mechanical Design, Transactions of the ASME   133(3)    Mar 2011   [Refereed][Invited]
Hirayama, K. Sakamoto, S., Tsuji, Y, Yamasaki, S., and Nishiwaki, S.
IEICE Transactions, Vol. E94-C, No.5 (2011)   874-881   2011   [Refereed][Invited]
Lim, S, Yamada, T., Min., S., and Nishiwaki, S.
IEEE Transactions on Magnetics, Vol. 47, No. 5(2011)   1318-1321   2011   [Refereed][Invited]
A Structural Optimization Method Incorporating Level Set Boundary Expressions Based on the Concept of the Phase Field Method
Yamada, T., Nishiwaki, S., Izui, K., Yoshimura, M., and Takezawa, A.
Journal of Environment and Engineering, Vol. 6 No. 3 (2011)   567-578   2011   [Refereed]
Level Set Based Topology Optimization Method Using the Augmented Lagrangian Method
Yamasaki, S., Nomura, T., Kawamoto, A., Sato, K., Izui, K., and Nishiwaki, S.nji
Journal of Environment and Engineering, Vol. 6 No. 2 (2011)   387-399   2011   [Refereed]

Misc

 
An optimum design method for devices using thermal transition flows based on topology optimization
Sato, A., Yamada, T., Izui, K., and Nishiwaki, S.
The Asian Congress of Structural and Multidisciplinary Optimization 2018, May 21-24, 2018, Dalian, China   No.A020120    May 2018
Optimum design of anisotropic acoustic metamaterials based on high-frequency homogenization method
Noguchi, Y., Yamada, T., Izui, K., and Nishiwaki, S.
The Asian Congress of Structural and Multidisciplinary Optimization 2018, May 21-24, 2018, Dalian, China   No.A020091    May 2018
Gradient-based multiobjective optimization techniques for topological design problems
NISHIWAKI Shinji
The Asian Congress of Structural and Multidisciplinary Optimization 2018, May 21-24, 2018, Dalian, China   No.A000006.    May 2018
Robust Topology Optimization under Wave Number Uncertainty for Increasing the Effective Bandwidth of an Electromagnetic Cloak
Sato, Y., Izui, K., Yamada, T., and Nishiwaki, S.
The Asian Congress of Structural and Multidisciplinary Optimization 2018, May 21-24, 2018, Dalian, China   No.A020119    May 2018
Level set-based topology optimization considering manufacturability via fictitious physical model based geometrical constraint for molding and milling
Hur, D.-Y., Sato, Y., Yamada, T., Izui, K., and Nishiwaki, S.
The Asian Congress of Structural and Multidisciplinary Optimization 2018, May 21-24, 2018, Dalian, China   May21-24(Dalian,China) No.A020192.   May 2018
Lightweight Design for Automotive Component Using Multi-material Level Set-based Topology Optimization
Lim, S., Misawa, R., Maruyama, S., Yamada, T., Izui K. and Nishiwaki, S.
The 4th International Conference on Computational Design in Engineering, April 1 - 5, 2018, Changwon, Korea   M1606-2    Apr 2018
Structural Optimization for Two-phase Nanoscale Heat Conduction Problems
Furuta, K., Sato, A., Izui, K., Yamada, T., Matsumoto, M., and Nishiwaki, S.
The 4th International Conference on Computational Design in Engineering, April 1 - 5, 2018, Changwon, Korea   M1606-2    Apr 2018
Topology Optimizaion for Innovative Device and Material Designs
Yamada, T., Izui, K., and Nishiwaki, S.
15th Japan International SAMPE Symposium and Exhibition, November 27-29, 2017, Tokyo, Japan   No.1A04.    Nov 2017
Level set-based topology optimization for multi-material problems,
Yamada, T., Kishimoto, N., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.134.    Jun 2017
A topology optimization method for molecular gas dynamics based on the Boltzmann equation
Sato, A., Okamoto, S., Yamada, T., Izui, K., Nishiwaki, S., and Takata, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.332.    Jun 2017
Level set-based topology optimization method for the design of a perfectly absorbing metasurface
Takahashi, H., Yamada, T., Nishiwaki, S., and Izui, K
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.245.    Jun 2017
Topology optimization of periodic flows using the local-in-time method and the lattice Boltzmann method
Chen, C., Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.221.    Jun 2017
Level set-based topology optimization for thermoelectric nanostructures considering the temperature discontinuity, based on the Boltzmann transport equation
Furuta, K., Sato, A., Izui, K., Matsumoto, M., Yamada, T., and Nishiwaki, S.
based on the Boltzmann transport equation, 12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.294.    Jun 2017
Topology optimization for unifying deposit thickness in electroplating process
Ishizuka, N., Yamada, T., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany,   No.131.    Jun 2017
A fictitious physical model-based geometrical constraint in topology optimization for molding and milling
Sato, Y., Yamada, T., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.163.    Jun 2017
Level set-based topology optimization for a soundproofing acoustic metasurface using Zwicker’s loudness model,
Noguchi, Y., Miyata, K., Yamada, T., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.218.    Jun 2017
Optimum design of compliant mechanism for morphing wing structure using level setbased topology optimization
Tsuda, A., Kogiso, N., Tamayama, M., Yamada, T., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.262.    Jun 2017
Topology optimization method for variable-axial composite
Nomura, T., Kawamoto, A., Kondoh, T., Spickenheuer, A., Petrovic, M., and Shinji Nishiwaki,
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany,   No.401.    Jun 2017
Orthotropic Material Orientation Optimization and Manufacturing in Composite Structures
Petrovic, M., Nomura, T., Tada, N., Takahashi, T., Nishiwaki, S., and Izui, K.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No.451.    Jun 2017
Design Optimization of the IPM Motor for Improving Torque Performanc at a High Driving Temperature Using Circuit-Field Coupled Analysis
Lim, S., Min, S., Izui, K., and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No. 454    Jun 2017
Imaging and pattern formation for vector fields using partial differential equations,
Kawamoto, A., Nomura, T., Tsuguo Kondoh, Mario Petrovic, and Nishiwaki, S.
12th World Congress of Structural and Multidisciplinary Optimisation (WCSMO12), June 5-9, 2017, Braunschweig, Germany   No. 463.    Jun 2017
Level Set-Based Topology Optimization and its Application to Device and Material Design,
Yamada, T. and Nishiwaki, S.
IACM Expressions   No.41 (2017) pp. 7-11   2017
A Level Set-based Topology Optimization for Fluid-structure Coupled Problems by Using Two-phase Material Model,
Yamamoto, T., Noguchi, Y., Yamada, T., Izui K., and Nishiwaki, S.
5th Joint Meeting of the Acoustical Society of America and Acoustical Society of Japan, 28 November - 2 December 2016, Honolulu, HI, USA,   5pNSa1.    Nov 2016
Level set-based Topology Optimization for the Design of Acoustic Metamaterial Using Two-phase Material Model
Noguchi T., Yamamoto, T., T Yamada, T., Izui K., and Nishiwaki, S.
5th Joint Meeting of the Acoustical Society of America and Acoustical Society of Japan, 28 November - 2 December 2016, Honolulu, HI, USA,   5pNSa2.    Nov 2016
Design of Acoustic Metamaterial using Level Set-based Topology Optimization,
Noguchi, Y., Yamada, T., Yamamoto, T., Izui, K., and Nishiwaki S.
the 7th International Conference on Computational Methods (ICCM2016), August 1st - 4th, 2016, Berkeley, California, USA   Session 3B2, No.2041.    Aug 2016
Topology Optimization of Nanoscale Heat Conduction with the Boltzmann Transport Equation
Furuta, K., Izui, K., Matsumoto, M., Yamada, T., and Nishiwaki, S.
Session 3B2, No. 2058.    Aug 2016
opology Optimization of a No-Moving-Part Valve Based on a Multiobjective Formulation,
Sato, Y., Yaji, K., Izui, K., Yamada, T., Nishiwaki, S.
12th World Congress on Computational Mechanics (WCCM XII), July 24-29, 2016. Seoul, Korea   No.150991.    Jul 2016
A Microstructural Optimization Method Based on Micropolar Continuum Theory,
Sato, A., Yamada, T., Izui, K., Nishiwaki, S.
12th World Congress on Computational Mechanics (WCCM XII), July 24-29, 2016. Seoul, Korea,   No.150992.    Jul 2016
Level Set-based Topology Optimization of Three Dimensional Wave-Motion-Converting Metasurface in an Acoustic-Elastic Coupled System
Noguchi, Y., Yamada, T., Otomori, M., Izui, K., Nishiwaki, S.
12th World Congress on Computational Mechanics (WCCM XII), July 24-29, 2016. Seoul, Korea,   No.151099.    Jul 2016
Topology Optimization of Heat Conduction Considering Phonon Dynamics at the Nano Scale
Furuta, K., Izui, K., Matsumoto, M., Yamada, T., Nishiwaki, S.
12th World Congress on Computational Mechanics (WCCM XII), July 24-29, 2016. Seoul, Korea,   No.151070.    Jul 2016
Kumagai, M., Otomori, M., Ide, T, Yamada, T., Izui, K., and Nishiwaki, S.
SAE Technical Paper   2016-01-1386(2016, doi:10.4271/2016-01-1386)    2016   [Invited]
Weight reduction of the body weight support of COWALK using the topology optimization method
Lee, K, Jung C. Y., Kim, S. J., Yamada, T., Izui, K., Nishiwaki, S., Yoo, J.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1093      Jun 2015   [Refereed][Invited]
Robust topology optimization of thin plate structure under concentrated load with uncertain load point
Nakazawa, Y., Kogiso, N., Yamada., T., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1105      Jun 2015   [Refereed][Invited]
Level set-based topology optimization for the design of a wave motion converter in an acoustic-elastic interaction system
Noguchi, Y., Yamada, T., Otomori, M., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1147      Jun 2015   [Refereed][Invited]
A level set based topology optimization method for micropump design utilizing induced-charge electro-osmosis
Tanaka, R., Yaji, K., Yamada, T., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1148      Jun 2015   [Refereed][Invited]
Layout optimization of electromagnetic actuators for deformable mirror devices
Okamoto, T., Yamada, T., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1251      Jun 2015   [Refereed][Invited]
Exploring the Pareto frontier in level set-based topology optimization
Sato, Y., Izui, K., Yamada, T., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1270      Jun 2015   [Refereed][Invited]
Level set-based topology optimization using the lattice Boltzmann method considering two-phase fluid flows
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., Nishiwaki, S.
Proceedings of 11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1302      Jun 2015   [Refereed][Invited]
Level set-based topology optimization for the design of optical hyperlens
Otomori, M., Uenishi K., Yamada, T., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1431   7-12 June, 2015, Sydney,(Australia, No.1431)    Jun 2015   [Refereed][Invited]
A bi-level multiobjective optimizatio approach for layout design of robotic cellular manufacturing systems
Izui, K., Bai, X., Yamada, T., Nishiwaki, S., Noda, A., and Nagatani, T.
Proceedings of the 45th International Conference on Computers & Industrial Engineering,October 28-30, 2015, Metz, France   (No. 175)    2015   [Invited]
A Layout Optimization Method for Robotic Cellular Manufacturing Systems Considering Task Scheduling
Suemitsu, I., Izui, K., Yamada, T., Nishiwaki, S., Noda, A., and Nagatani, T.
CIE44 & IMSS'14 Proceedings, Istanbul, Turkey   533-546   Oct 2014   [Refereed][Invited]
Otomori, M., Yamada, T.,Izui, K., Nishiwaki, S., and Kogiso, N.
4th International conference on engineering optimization (EngOpt2014), Lisbon, Portugal, 5892      Sep 2014   [Refereed][Invited]
Otomori, M., Yamada, T., Andkjar, J., Izui, K., Nishiwaki, S., and Kogiso, N.
8th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics - Metamaterials 2014, Copenhagen, Denmark      Aug 2014   [Refereed][Invited]
Level set-based topology optimization method for mechanical structures considering structural flexibility
Yamada, T., Izui, K., Nishiwaki, S.
11th World Congress on Computational Mechanics (WCCM11), Barcelona, Spain, No. MS494D-1      Jul 2014   [Invited]
Level set-based topology optimization for a coupled thermal-fluid problem using the lattice Boltzmann method
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., Nishiwaki, S.
11th World Congress on Computational Mechanics (WCCM11), Barcelona, Spain, No. MS176A-1      Jul 2014   [Invited]
Toplogy Optimziation for Automotive Application
Nishiwaki, S.
Future Car Body 2014, 3-4 June 2014, Bad Nauheim, Germany   109-142   Jun 2014   [Invited]
Topology optimization of hydrodynamic microfluidic mixer based on the level-set based boundary expression
Kubo, S., Yaji, K., Yamada, T., Izui, K., Nishiwaki, S.
International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece, No.3251      Jun 2014   [Invited]
Topology optimization incorporating level set boundary expressions for incompressible viscous fluid using the lattice Boltzmann method
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., Nishiwaki, S.
International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece, No.3389      Jun 2014   [Invited]
Optimum design of dynamic mechanical structures utilizing level set-based topology optimization method
Yamada, T., Kotani, T., Izui, K., Nishiwaki, S.
International Conference on Engineering and Applied Sciences Optimization (OPT-i), Kos Island, Greece, No.3460      Jun 2014   [Invited]
Level set-based robust topology optimization for eigenvalue maximization problem under spatial uncertainty of stiffness distribution
Nishino, A., Kogiso, N., Otomori, M., Yamada, T., Nishiwaki, S.
8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, T4D_5_086      May 2014   [Refereed][Invited]
Level set-based topology optimization for design of a fluid channel considering thermal effects using the lattice Boltzmann method
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., Nishiwaki, S.
8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, T2A_3_151      May 2014   [Invited]
A technique for ensuring diversity of solutions in aggregative gradient-based multi objective optimization
Sato, Y., Izui, K., Yamada, T., Nishiwaki, S.
8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, M2A_2_046      May 2014   [Invited]
Otomori, M., Yamada, T., Izui, K., Nishiwaki, S.
8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, T3A_4_108      May 2014   [Invited]
Otimum design of locally resonant sonic materials utilizing level set-based topology optimization
Yamada, T., Matsuki, T., Izui, K., Nishiwaki, S.
8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM8), Gyeongju, Korea, M1E_5_127      May 2014
A Level set-based topology optimization for local stress problems
Yamada, T., Izui, K., Nishiwaki, S., Ishii, K.
5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, Singapore, No.1173      Dec 2013   [Invited]
Level set-based topology optimization method for flow channel problem using lattice Boltzmann method
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., Nishiwaki, S.
5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, Singapore, No.1517      Dec 2013   [Invited]
Design method for automobile gearbox module utilizing optimization methods
Yamada, T., Yamagata, K., Ishikawa, S., Izui, K., Nishiwaki, S.
5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, Singapore, No.1648      Dec 2013   [Invited]
Flow rate constrained topology optimization of manifold with level set-based boundary representation
Kubo, S., Yaji, K., Yamada, T., Izui, K., Nishiwaki, S.
5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, Singapore, No.1922      Dec 2013   [Invited]
Level set-based topology optimization for the design of light-trapping structures
Otomori. M., Yamada, T., Izui, K., Nishiwaki, and S., Kogiso, N.
Proceedings of the 19th International Conference on the Computation of Electromagnetic Fields, Budapest, Hungary, No.PD1-6      Jul 2013   [Refereed][Invited]
Level set-based Topology optimization of acoustic metamaterials
Otomori, M., Lu, L., Nishiwaki, S., Yamada, T., Izui, K., and Yamamoto, T.
Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO10), Orlando, Florida, USA, No.5142      May 2013   [Refereed][Invited]
A gradient-based multiobjective optimization technique using an adaptive weighting method
Izui, K., Yamada, T., and Nishiwaki, S.
Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO10), Orlando, Florida, USA, No.5143      May 2013   [Refereed][Invited]
Level set-based topology optimization method for viscous flow using Lattice Boltzmann Method
Yaji, K., Yamada, T., Yoshino, M., Matsumoto, T., Izui, K., and Nishiwaki, S.
Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO10), Orlando, Florida, USA, No.5171      May 2013   [Refereed][Invited]
Design of a far-infrared lens based on topology optimization,
Akatsuchi Y., Yamada, T., Izui, K., Nishiwaki, S., Ohkado, M., and Nomura, T.
Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO10), Orlando, Florida, USA, No.5326      May 2013   [Refereed][Invited]
Topology optimization for microstructure design of plasmonic composites
Otomori, M., Andkjaer J., Sigmund, O., Yamada, T., Izui, K., and Nishiwaki, S.
Proceedings of the 10th World Congress on Structural and Multidisciplinary Optimization (WCSMO10), Orlando, Florida, USA, No.5329      May 2013   [Refereed][Invited]
Topology optimization for maximum Von Mises stress constraint problems using the level set method and KS Function
Yamada, T., Izui, K., Nishiwaki, S., Ishii, K.
10th World Congress on Structural Multidisciplinary Optimization (WCSMO10), Orland, Florida, USA, No.5114      May 2013   [Invited]
Level set based topology optimization of switching fluidic device for incompressible viscous flow
Kubo, S., Yaji, K., Yamada, T., Izui, K., Nishiwaki, S.
10th World Congress on Structural Multidisciplinary Optimization (WCSMO10), Orland, Florida, USA, No.5328      May 2013   [Invited]
Topological Derivatives for Stress Related Problems and their Application to Level Set-based Topology Optimization
Yamada, T., Matsumoto, T., Izui, K., and Nishiwaki, S.
Proceedings of International Conference on Computational Mechanics (CM13), Durham, UK, No.137-CM13      Mar 2013   [Refereed][Invited]
Topology Optimization for Micropolar Bodies Based on the Level Set Method
Ikeda, K., Nishiwaki, S., Izui, K., Yamada, T., and Kawamoto, A.
Asian Conference on Design and Digital Engineering 2012, Niseko, Hokkaido, Japan, No.100109      Dec 2012   [Invited]
A Gradient-based Multiobjective Optimization Technique for Large-scale Problems
Izui, K., Yamada, T., and Nishiwaki, S.
Asian Conference on Design and Digital Engineering 2012, Niseko, Hokkaido, Japan, No.100133      Dec 2012   [Invited]
A Topology Optimization Method Under Oseen Flow Based on the Level Set Method
Yaji, K., Yamada, T., Kubo, S., Izui, K., and Nishiwaki, S.
ICOME/JASCOME Symposium 2012 Kyoto, Japan, No.J02      Dec 2012   [Invited]
Shape Optimization of Flux Barriers in IPM Synchronous Motors
Choi, J. S., Yamada, T., Izui, K., Nishiwaki, S., Lim, H., and Yoo, J.
The 15th Biennal IEEE Conference on Electromagnetic Field Compuation Oita, Japan, accepted   77   Nov 2012   [Refereed][Invited]
Level Set-based Topology Optimization for the Design of an Electromagnetic Cloak with Ferrite Material
Otomori, M., Yamada, T., Andkjaer, J., Izui, K., Nishiwaki, S., and Kogiso, N.
Digests of the 15th Biennial IEEE Conference on Electronic Field Computation (CEFC2012), Oita, Japan   374   Nov 2012   [Refereed][Invited]
Design of Dielectric Materials with Prescribed Effective Permitivity by Topology Optimization
Otomori, M., Andkjar, J. A., Sigmund, O., Izui, K., and Nishiwaki, S.
JSME-CMD International Computational Mechanics Symposium 2012, Kobe, Japan, No.MS11-2-1(63)      Oct 2012   [Invited]
Topology Optimization of Steady Incompressible Viscous Flow for Fluidic Devices
Kubo, S., Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
JSME-CMD International Computational Mechanics Symposium 2012, Kobe, Japan, No.MS11-1-2(105)      Oct 2012   [Invited]
Optimal Design of Acoustic Metamaterials by Topology Optimization
Lu, L., Yamamoto, T., Yamada, T., Otomori, M., Izui K., and Nishiwaki, S.
JSME-CMD International Computational Mechanics Symposium 2012, Kobe, Japan, No.MS11-2-3(66)      Oct 2012   [Invited]
Generating Structural Configurations Having a Number of Specified Eigenfrequencies using a Level Set-Based Topology Optimization Method
Yamada, T., Matsumoto, T., and Nishiwaki, S.
Proceedings of the Eleventh International Conference on Computational Structures Technology, Dubrovnik, Croatia, No. 232      Sep 2012   [Refereed][Invited]
Level Set-Based Structural Topology Optimization of Metallic Waveguide Loaded with Ferrite
Otomori, M., Yamada, T., Izui, K., and Nishiwaki, S.
14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, Indiana, USA, AIAA2012-5477      Sep 2012   [Refereed][Invited]
Level Set-Based Topology Design Considering Spatial Uncertainty
Ueda, K., Otomori, M., Kogiso, N., Yamada T., and Nishiwaki, S.
14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indiana, USA, AIAA2012-5565      Sep 2012   [Refereed][Invited]
A Layout Design Optimization Method for Multi-robot Assembly Systems
Suemitsu, I., Yamada, T., Izui, K., Nishiwaki, S., Noda, A., and Nagatani, T.
KSME-JSME Joint Symposium Computational Mechanics & CAE 2012, Kanazawa, Japan   95-104   Sep 2012   [Invited]
Level Set-based Topology Optimization for the Design of Negative Permeability
Otomori, M., Yamada, T, Izui, K and Nishiwaki, S.
KSME-JSME Joint Symposium Computational Mechanics & CAE 2012, Kanazawa, Japan   147-156   Sep 2012   [Invited]
Level Set-Based Topology Optimization of Internal Flow Problem in an Incompressible Viscous Fluid
Yaji, K., Yamada, T, Izui, K and Nishiwaki, S.
KSME-JSME Joint Symposium Computational Mechanics & CAE 2012, , Kanazawa, Japan   159-164   Sep 2012   [Invited]
Structural Optimization for Metallic Patch Antenna using Transition Boundary Condition method
Ohkado, M., Tsukamoto, S., Nomura, T., Izui, K., and Nishiwaki, S.
the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) TS016-2517      Sep 2012   [Invited]
T. Yamada; T. Matsumoto; S. Nishiwaki
Proceedings of the ASME Design Engineering Technical Conference   3(PARTS A AND B) 857-862   Aug 2012   [Refereed][Invited]
Topology Optimization Method Using Level Set Boundary Expressions in Navier Stokes Flow
Yaji, K., Yamada, T., Izui K., and Nishiwaki, S.
14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Indianapolis, Indiana, USA, AIAA2012-5526      Aug 2012   [Refereed][Invited]
A Thin Metallic Structure Topology Optimization Technique for the Design of Patch Antennas
Tsukamoto, S., Izui, K., Nishiwaki, S., Ohkado, M., Nomura, T.
10th World Congress on Computational Mechanics, and 4th Asian Pacific Congress on Computational Mechanics, Sao Paulo, Brazil, No. 18547      Jul 2012   [Invited]
Level-set Based Topology Optimization of Stokes Flow
Kubo, S., Izui, K., and Nishiwaki, S.
10th World Congress on Computational Mechanics, and 4th Asian Pacific Congress on Computational Mechanics, Sao Paulo, Brazil, No. 19002      Jul 2012   [Invited]
Level set-based Topology Optimization for the Design of a Left-handed Waveguide Using Ferromagnetic Inclusions
Otomori, M., Yamada, T., Izui, K, Nishiwaki, S., and Kogiso, N.
10th World Congress on Computational Mechanics, and 4th Asian Pacific Congress on Computational Mechanics, Sao Paulo, Brazil, No. 19015      Jul 2012   [Invited]
Level Set Based-Topology Optimization in a Viscous Fluid Under Oseen Approximation
Yaji, K., Yamada, T., Izui, K., and Nishiwaki, S.
Proceedings of 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM7), Huangshan, China, J069      Jun 2012   [Refereed][Invited]
Level Set-Based Topology Optimization Method for the Design of Acoustic Metamaterial with Negative Bulk Modulus
Lu, L., Yamamoto, T., Yamada, T., Otomori, M., Izui, K., and Nishiwaki, S.
Proceedings of 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM7), Huangshan, China, J098      Jun 2012   [Refereed][Invited]
Topology Optimization for the microstructure Design of Dielectric Materials
Otomori,M., Andkjær,J., Sigmund,O., Izui, K., and Nishiwaki,S.
Proceedings of 7th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems (CJK-OSM7), Huangshan, China, J039      Jun 2012   [Refereed][Invited]
Optimum design of periodic microstructures for minimal dispersive effects in wave propagation
Yamada, T., Allaire, G., Izui, K., Nishiwaki, S.
11th World Congress on Structural and Multidisciplinary Optimisation (WCSMO-11), Sydney, Australia, No.1058      Jun 2012   [Refereed][Invited]
Multi-material Optimization of Electric Machines Using an Allen-Cahn Equation
Choi, K., Izui, K., and Nishiwaki, S.
IEEE International Magnetics Conference, Vancouver, Canada, EG-07      May 2012   [Refereed][Invited]
N.T. Hung; H. Morishita; K. Izui; S. Nishiwaki; Y. Koyanagi
Proceedings of 6th European Conference on Antennas and Propagation, EuCAP 2012   1925-1928   2012   [Refereed]
T. Yamamoto; S. Maruyama; K. Izui; S. Nishiwaki
Conference Proceedings of the Society for Experimental Mechanics Series   6 43-52   2012   [Refereed]
N.T. Hung; H. Morishita; K. Izui; S. Nishiwaki; Y. Koyanagi
IEEE Antennas and Propagation Society, AP-S International Symposium (Digest)      2012   [Refereed]
Level set-based robust topology design considering spatial uncertainty
K. Ueda; M. Otomori; N. Kogiso; T. Yamada; S. Nishiwaki
12th AIAA Aviation Technology, Integration and Operations (ATIO) Conference and 14th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference      2012   [Refereed]
Modular Structural Component Design Using the First Order Analysis and Decomposition-Based Assembly Synthesis
Cetin, O. L., Saitou, K., Nishigaki, H., Nishiwaki, S., Amago, T., and Kikuchi, N.
Proceedings of 2001 ASME International Mechanical Engineering Congress and Exposition, 2001, New York, NY, USA, IMECE2001/DSC-23265      Nov 2011   [Refereed][Invited]
A Level Set-based Topology Optimization for Mechanical Sructures
Otomori, M., Yamada, T., Izui, K., and Nishiwaki, S.
Euromech522 Colloquium "Recent Trends in Optimisation for Computational Solid Mehcanics", Erlangen, Germany   44-46   Oct 2011   [Invited]
Structural Optimization of Geometrically Nonlinear Problems Using Level Set-Based Topology Optimization and a Particle Method
Nishiwaki, S., Manabe, M, Yamada, T., and Izui, K.
11th US National Congress on Computational Mechanics, Minneapolis, Minnesota, USA, No. 211662      Jul 2011   [Invited]
Topology Optimization of an Interior Permanent Magnet Synchronous Motor to Reduce Cogging Torque
Choi, J.-S., Izui, K., Nishiwaki, S., Nomura, T., and Kawamoto, A.
6th China-Japan-Korea Joint Symposium on Optimization of Structural and Mechanical Systems, Kyoto, Japan, No. J-08      Jun 2011   [Refereed][Invited]

Books etc

 
Layout Optimization Techniques for Robot Cellular Manufacturing Systems
Izui, K., Yamada, T., Nishiwaki, S., Noda, A., and Nagatani, T. (Part:Joint Work, Cellular Manufacturing Systems Recent Developments)
Analysis and Case Studies   2017   
Perspectives on Design Creativity and Innovation Research
Nishiwaki, S.
International Journal of Design Creativity and Innovation, Vol. 1, Issue 1 (2013)   2013   
Structural Topology Optimization of Mechanical Resonators, Actuators, and Sensors
Nishiwaki, S., Silva, E. C. N., Matsui, K., Terada, K., Izui, K., and Yoshimura, M
IUTAM Symposium on Topological Design Optimization of Structures, Machines, and Materials   2006   
Topology Optimization with CAMD for Structures Undergoing Finite Deformation
Matsui, K., Terada, K., and Nishiwaki, S
UTAM Symposium on Topological Design Optimization of Structures, Machines, and Materials   2006   
Flextensional Actuator Design Using Topology Optimization and the Homogenization Method
(1) ilva, E. C. N., Nishiwaki, S., and Kikuchi, N
Smart Structures Requirements and Potential Applications in Mechanical and Civil Engineering   1999   

Conference Activities & Talks

 
Level set-based Topology Optimization for the Structural Designs of New Devices and Materials
NISHIWAKI Shinji
4th International Conference on Computational Design in Engineering, 1-5 April 2018, Changwon, Korea.   1 Apr 2018   
Topology optimization for the innovative structural designs of devices and materials
NISHIWAKI Shinji
Simulations Encounter with Data Science Data Assimilation, Emulators, Rare Events and Design, March 9-11, 2017, Tachikawa, Tokyo, Japan.   9 Mar 2017   
A New Topology Optimization and Its Application to Mechanical, Electromagnetic and Material Designs, Semi Plenary Lecture
Nishiwaki, S., Yamada, T., Nomura, T., and Izui, K.
The 12th World Congress on Computational Mechanics (WCCM12) 2016, 24-29 July 2016, Seoul, Korea   24 Jul 2016   
A New Topology Optimization Method and Its Application to Innovative Structure and Material Designs [Invited]
Nishiwaki, S., Yamada, T., and Izui, K.
Semi Plenary Lecture, European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS) 2016,6-10 June 2016, Crete Island, Greece   6 Jun 2016   
Topology Optimization - Theory and Applications for Product and Material Designs -
Nishiwaki, S., Yamada, T., and Izui, K.
The 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mehcanical Systems, 25-29 May 2014, Gyeongju, Korea, p. 48.   25 May 2014   
Theory and Applications for Product and Material Designs -, Plenary Lecture [Invited]
Nishiwaki, S., Yamada, T., and Izui, K.
Plenary Lecture, The 8th China-Japan-Korea Joint Symposium on Optimization of Structural and Mehcanical Systems, 25-29 May 2014, Gyeongju, Korea,p.48   25 May 2014   
最適設計技術の基礎 [Invited]
NISHIWAKI Shinji
24 Nov 2011   
Structural optimization to support the conceptual designs of mechanical structures [Invited]
Nishiwaki, S.
KSME workshop, “Kinematics and Optimal Design” (Application to Suspension and Chassis), August, 25 2006, Seoul, Korea   25 Aug 2006   

Association Memberships

 
 

Research Grants & Projects

 
Optimal design of mechanical fuction-oriented structures
Project Year: 2002 - 2004
Integrated optimization of large scale systems
Project Year: 2002 - 2002
Concept Design of Mechanical Products
Project Year: 2002 - 2004
Optimal Design of Mechanical Products
Development of Conceptual Design Mtethod for Mechanical Products

Patents

 
特願6,264182(2001) : Motion Converting Device and Impact Absorbing/Buffering Device
Nishiwaki,S. Kikuchi, N.
U. S. Patent No. 6,264,182
特願EP1178413A(2001) : Method and System for supporting User in Analyzing Performance of Object, Using Generalized and Specialized Models on Coomputer
Nishiwaki,S., Nishigaki,H.,Kojima,Y.,Amago,T.,Tsurumi,Y.,
United States Patent, No. US 9,081,920 B2. : Structural Optimization System, Structural Optimization Method, and Structural Optimization Program
Yamada, T., Nishiwaki, S., Izui, K., and Yoshimura, M.