MORI Ikuko

J-GLOBAL         Last updated: Jun 3, 2019 at 15:29
 
Avatar
Name
MORI Ikuko
Affiliation
Suzuka National College of Technology
Section
Department of Electronic and Information Engineering

Published Papers

 
高義礼, 加川義久, 森育子, 藤原修
電気学会論文誌 A   135(5) 253-258 (J-STAGE)   May 2015   [Refereed]
Cheng Ji,Daisuke Anzai,Jianqing Wang,Ikuko Mori,Osamu Fujiwara
IEICE Transactions   98-B(12) 2477-2484   Dec 2015   [Refereed]
Ikuko Mori, Osamu Fujiwara
Przeglad Elektrotechniczny   88 75-77   Jun 2012   [Refereed]
To grasp the characteristics of air discharges of electrostatic discharge (ESD) guns, time-variant spark gap voltage waveforms at low charge voltages are discussed. Through the application of our proposed circuit approach using measured discharge ...
YAMANAKA Yukio, ADACHI Takashi, ISHIGAMI Shinobu, MORI Ikuko, TAKA Yoshinori, FUJIWARA Osamu
IEEJ Transactions on Fundamentals and Materials   132(5) 350-355   May 2012   [Refereed]
In the present study, using a 50Ω tapered coaxial type adapter and a S-parameter technique, we measured the transfer impedance of a commercially available IEC calibration current target used for the immunity testing against electrostatic discharge...
TOYA Fumihiko, MORI Ikuko, FUJIWARA Osamu, TAKA Yoshinori, ISHIGAMI Shinobu, YAMANAKA Yukio
The transactions of the Institute of Electronics, Information and Communication Engineers. C   94(10) 288-295   Oct 2011   [Refereed]
IEC61000-4-2では,静電気試験機(ESDガン)の電流検出変換器(ターゲット)への接触放電に対する放電電流の波形校正を要求しているが,ターゲットに注入される電流波形が実際の供試機器(EUT)へ注入されるとは限らない.本論文では,ESDガンのターゲットへの接触放電に対する放電電流波形がEUTへの放電電流波形とどの程度異なるかを検討した.まず,EUTきょう体としたグランド板とラップトップPCへの接触放電を行い,近傍磁界から放電電流を推定したところ,両者へ注入される放電電流波形は校正電流...

Misc

 
Ikuko Mori, Yoshinori Taka, Osamu Fujiwara, Osamu Fujiwara
Electronics and Communications in Japan, Part II: Electronics (English translation of Denshi Tsushin Gakkai Ronbunshi)   91 54-61   Dec 2008
In IEC 61000-4-2 for electrostatic discharge (ESD) immunity testing, an ESD gun is used to simulate the ESD events from a charged human body. A gun of this kind injects into a device being tested the discharge current through a lumped resistor fro...
Ikuko Mori, Osamu Fujiwara, Shinobu Ishigami, Yukio Yamanaka
Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)   158 51-59   Mar 2007
An immunity testing method for electrostatic discharge (ESD) is being specified in IEC 61000-4-2, in which the contact discharge of an ESD gun is being normally specified. Air discharge testing is known to be a severe immunity test compared to con...
Osamu Fujiwara, Ikuko Mori, Shinobu Ishigami, Yukio Yamanaka
Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi)   153 17-24   Oct 2005
An ESD (electrostatic discharge) testing is specified in the IEC 61000-4-2, in which the detailed waveform of the discharge current injected by an ESD gun is prescribed. However, due to lack of understanding of the discharge process, it is difficu...

Conference Activities & Talks

 
加川義久, 高義礼, 森育子, 藤原修
電気学会全国大会講演論文集(CD-ROM)   5 Mar 2014   
Yoshihisa Kagawa, Ikuko Mori, Yoshinori Taka, Osamu Fujiwara
IEEE International Symposium on Electromagnetic Compatibility   12 May 2014   
© 2014 The Institute of Electronics, Information and Communication Engineer.To understand the characteristics of human electrostatic discharges (ESDs), using a 12-GHz digital oscilloscope, we measured discharge currents injected into an IEC (Inter...
Cheng Ji, Daisuke Anzai, Jianqing Wang, Ikuko Mori, Osamu Fujiwara
IEEE International Symposium on Electromagnetic Compatibility   12 May 2014   
© 2014 The Institute of Electronics, Information and Communication Engineer.In conformity with the IEC61000-4-2 standard, we conducted a case study of electrostatic discharge (ESD) tests for a small-type control board to investigate the basic coup...
JI Cheng, 安在大祐, WANG Jianqing, 森育子, 藤原修
電子情報通信学会技術研究報告   15 Nov 2013   
Ikuko Mori, Osamu Fujiwara, Heyno Garbe
Proceedings of EMC Europe 2011 York - 10th International Symposium on Electromagnetic Compatibility   14 Dec 2011   
In order to calculate discharge current waveforms for air discharges of ESD-Guns, an equivalent circuit representation is proposed by means of applying a spark resistance formula for our previously proposed circuit modeling for contact discharges....