KITO Mizuki

J-GLOBAL         Last updated: May 30, 2019 at 17:08
 
Avatar
Name
KITO Mizuki
Affiliation
Suzuka National College of Technology
Section
Department of Mechanical Engineering

Research Areas

 
 

Published Papers

 
Fujimatsu, T., Kito, M., Kondo, K.,
Proceedings of the 5th International Conference on Jets, Wakes and Separated Flows (ICJWSF2015) in Springer Proceedings in Physics   Vol.185 493-500   2016   [Refereed]
Kito Mizuki, Fujimatsu Takahiro, Kondo Kunikazu
FLOW TURBULENCE AND COMBUSTION   102(2) 345-353   Feb 2019   [Refereed]
Fujimatsu, T., Kito, M., Kondo, K.
WIT Transactions on Engineering Sciences,   82 191-202   2014   [Refereed]
Mizuki Kito, Toshihiko Shakouchi, Koichi Tsujimoto, Toshitake Ando
Jets, wakes and separated flows : proceedings of International Conference on Jets, Wakes and Separated Flows, ICJWSF   2013(4) 1002-1"-"1002-6"   Sep 2013   [Refereed]
Setting the second orifice nozzle after the first orifice nozzle with a resonance room, the jet causes a periodic resonance oscillation. In this study, the resonance frequency dependence on the jet velocity and the volume of resonance room were pr...
SHAKOUCHI Toshihiko
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B   79(798) 126-139   2013   [Refereed]
The jet flow from an orifice nozzle shows a particular velocity profile with a large velocity gradient at the edge of the jet. Setting an orifice nozzle, second one, with a resonance room just after the first orifice nozzle the jet causes resonanc...
M. Kito, T. Matsumoto, T. Shakouchi, K. Tsujimoto, T. Ando
WIT Transactions on Engineering Sciences   75 169-180   Oct 2012   [Refereed]
Determining the local heat transfer coefficient on a target surface is essential for many engineering applications. Numerous studies of the heat transfer and flow characteristics for jet impingement on surfaces have been published. However, few st...
Effect of Inclination of Impinging Jets on Flow and Heat Transfer Characteristics
Mizuki KITO
International Journal of Science and Engineering Investigations   1(9) 42-47   2012   [Refereed]
Enhancement of Impingement Heat Transfer on a Flat Plate with Ribs
Kito, M., Takezaki, M., Shakouchi, T., Tsujimoto, K., Ando. T.,
International Journal of World Academy of Science, Engineering and Technology   68 1623-1629   2012   [Refereed]
SHIMAOKA Mitsuyoshi, UEDA Etsuko, KITO Mizuki
Journal of JSEE   59(3) 61-66   May 2011   [Refereed]
Female students at colleges of technology far outnumber female engineering students at Japanese universities. Engineering education of female student must be done properly. The experiences of two female teachers belonging to the department of cont...
SHAKOUCHI Toshihiko, KITO Mizuki, TSUDA Masaaki, TSUJIMOTO Koichi, ANDO Toshitake
Journal of Fluid Science and Technology   6(4) 453-464   2011   [Refereed]
The centerline velocity of an orifice jet increases in the downstream direction from the nozzle exit and reaches a maximum of 1.2uce (where uce is the nozzle exit maximum velocity) at x/do≈2 (w...

Books etc

 
Heat Transfer, Heat Transfer Enhancement of Impinging Jet by Notched Orifice Nozzle
Shakouchi, T. and Kito, M.,

Conference Activities & Talks

 
TWO PHASE FLOW PHENOMENA IN A HORIZONTAL PIPE WITH A SUDDEN CONTRACTION – EFFECTS OF CONTRACTION RATIO ON FILM BEHAVIOUR –
FUJIMATSU Takahiro, KITO Mizuki, KONDO Kunikazu
Multiphase Flow 2019, 10th International Conference on Computational & Experimental Methods in Multiphase & Complex Flow   21 May 2019   
坂下 竣一, 荻野 徹, 近藤 邦和, 鬼頭 みずき, 藤松 孝裕
日本設計工学会東海支部研究発表講演会講演論文集   2018   
森川 智裕, 近藤 邦和, 中村 勇志, 鬼頭 みずき, 藤松 孝裕
日本設計工学会東海支部研究発表講演会講演論文集   2018   
高坂 壮偉, 鈴木 拓海, 近藤 邦和, 中村 勇志, 鬼頭 みずき, 藤松 孝裕
日本設計工学会東海支部研究発表講演会講演論文集   2018   
長谷川 智也, 若林 拓海, 近藤 邦和, 鬼頭 みずき, 藤松 孝裕
日本設計工学会東海支部研究発表講演会講演論文集   2018