Mizuki Kito

Profile Information

Degree: 博士(工学)

J-GLOBAL ID: 201001054561056708
researchmap Member ID: 6000023968

Research Interests

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Fluid engineering /

Committee Memberships

2013

organizing committee member, 4th International Conference on Jets, Wakes and Separated Flows

Papers

Orifice Jet Control Using Sub-Flows Issuing from Circular and Non-Circular Openings

Kito Mizuki, Fujimatsu Takahiro, Kondo Kunikazu

FLOW TURBULENCE AND COMBUSTION, 102(2) 345-353, Feb, 2019 Peer-reviewed
REPORT ON DESIGNING AND BUILDING MANUAL-CONTROLLED ROBOTS AND SHARING OF THE LECTURE CONTENTS

SHIRAI Tatsuya, Mizuki Kito, Yutaka Sawaki, Takahiro Fujimatsu, Hisakazu Ezaki, Junichi Yoshida

Proceedings of the 12th International Symposium on Advances in Technology Education (ISATE2018), IVE, Hong Kong, 9 September 2018, Sep, 2018 Peer-reviewed
Film Behavior of Two-Phase Flow in a Horizontal Pipe with a Sudden Contraction

Takahiro Fujimatsu, Mizuki Kito, Kunikazu Kondo

PROCEEDINGS OF THE 5TH INTERNATIONAL CONFERENCE ON JETS, WAKES AND SEPARATED FLOWS (ICJWSF2015), 185 493-500, 2016 Peer-reviewed
Production of desktop LBR and biofilm formation behavior.

Nishi, Nanae, Kanematsu, Hideyuki, Miura, Yoko, Kito, Mizuki, Hirai, Nobumitsu, Ogawa, Akiko

27(2) 595-596, Sep, 2014 Peer-reviewed
Droplet size measurement of liquid atomization by the immersion liquid method (droplet coalescence and solution into the immersion liquid)

T. Fujimatsu, M. Kito, K. Kondo

WIT Transactions on Engineering Sciences, 82 191-202, Jul 1, 2014 Peer-reviewed
RESONANCE JET FLOW FROM NOTCHED ORIFICE NOZZLE

Mizuki Kito, Toshihiko Shakouchi, Koichi Tsujimoto, Toshitake Ando

Jets, wakes and separated flows : proceedings of International Conference on Jets, Wakes and Separated Flows, ICJWSF, 2013(4) 1002-1"-"1002-6", Sep, 2013 Peer-reviewed
Jet flow from resonance nozzle and flow control by notched nozzle

Toshihiko Shakouchi, Mizuki Kito, Koichi Tsujimoto, Toshitake Ando

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 79(798) 126-139, 2013 Peer-reviewed
Jet Flow from Resonance Nozzle and Flow Control by Notched Nozzle

SHAKOUCHI Toshihiko

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 79(798) 126-139, 2013 Peer-reviewed
Effect of Inclination of Impinging Jets on Flow and Heat Transfer Characteristics

Mizuki KITO

International Journal of Science and Engineering Investigations, 1(9) 42-47, 2012 Peer-reviewed
Enhancement of Impingement Heat Transfer on a Flat Plate with Ribs

Kito, M, Takezaki, M, Shakouchi, T, Tsujimoto, K, Ando. T

International Journal of World Academy of Science, Engineering and Technology, 68 1623-1629, 2012 Peer-reviewed
Heat transfer characteristics for inclined twin-jet impingement

M. Kito, T. Matsumoto, T. Shakouchi, K. Tsujimoto, T. Ando

WIT Transactions on Engineering Sciences, 75 169-180, 2012 Peer-reviewed
A Desirable Female Teacher in College of Technology

SHIMAOKA Mitsuyoshi, UEDA Etsuko, KITO Mizuki

Journal of JSEE, 59(3) 61-66, May, 2011 Peer-reviewed
Flow characteristics of free jet flow from orifice nozzle with small notches

Toshihiko Shakouchi, Mizuki Kito, Masaaki Tsuda, Koichi Tsujimoto, Toshitake Ando

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 77(775) 415-423, 2011 Peer-reviewed
Flow Transition and Development over a Flat Plate and in a Circular Pipe

(47) 13-18, 2011
Flow Characteristics of Free Jet Flow from Orifice Nozzle with Small Notches

SHAKOUCHI Toshihiko, KITO Mizuki, TSUDA Masaaki, TSUJIMOTO Koichi, ANDO Toshitake

TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B, 77(775) 415-423, 2011 Peer-reviewed
Flow and Heat Transfer of Impinging Jet from Notched-Orifice Nozzle

SHAKOUCHI Toshihiko, KITO Mizuki, TSUDA Masaaki, TSUJIMOTO Koichi, ANDO Toshitake

Journal of Fluid Science and Technology, 6(4) 453-464, 2011 Peer-reviewed
S0502-1-3 Flow and Heat Transfer Control and Improvement of Impinging Jet by Conical, Notched Orifice Nozzle

SHAKOUCHI Toshihiko, TSUDA Masaaki, KITO Mizuki, TSUJIMOTO Koichi, ANDO Toshitake

The proceedings of the JSME annual meeting, 2010.2 147-148, 2010
309 The Flow and Heat Transfer Characteristics of Notched Orifice Free and Impinging Jets

SHAKOUCHI Toshihiko, TSUDA Masaaki, KITO Mizuki, TSUJIMOTO Koichi, ANDO Toshitake

The Proceedings of Conference of Tokai Branch, 2010.59 159-160, 2010
Flow and heat transfer characteristics of impinging jet from notched orifice nozzle

Toshihiko Shakouchi, Mizuki Kito, Masaaki Tsuda, Koichi Tsujimoto, Toshitake Ando

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 76(772) 2235-2241, 2010 Peer-reviewed
Flow and heat transfer characteristics of impinging jet from notched orifice nozzle

Toshihiko Shakouchi, Mizuki Kito, Masaaki Tsuda, Koichi Tsujimoto, Toshitake Ando

Nihon Kikai Gakkai Ronbunshu, B Hen/Transactions of the Japan Society of Mechanical Engineers, Part B, 76(772) 2235-2241, 2010 Peer-reviewed

Misc.

Gas-Liquid Two Phase Flow in a Horizontal Pipe with a Sudden Contracted Area

田村壮志, 宇藤圭駿, 鬼頭みずき, 近藤邦和, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2021, 2022
Study on the Economy-run Car Engine (Effect of Cam Shape on Fuel Consumption)

岩根直也, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2021, 2022
Effects of Sub-flows with an Angle on a Main Jet Flow

古川慧一, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2021, 2022
A Prototype Nozzle with Variable Sub-flows

杉野将太, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2020, 2021
Thermo-fluid Analysis on Temperature-drop Effect of a Water in Reservoir

辻凌也, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2020, 2021
Flow Simulation in the Cylinder of the Economy-run Car Engine

辻本臣, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2019, 2020
Free jet flows from Triangular Orifice Nozzles

日本設計工学会東海支部研究発表講演会講演論文集, 52-54, 2019
円柱間を通過する噴流が加熱面冷却に及ぼす影響について

藤方郷, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2017, 2018
流路内におけるバイオフィルムの生成

岩塚隆之佑, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2017, 2018
副噴流を有するオリフィス自由噴流の流動特性

菅原輝, 上林祥大, 鬼頭みずき, 藤松孝裕, 服部俊, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2017, 2018
共鳴オリフィスノズル衝突噴流の伝熱特性

和田健吾, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2017, 2018
Internal Flow Analysis of the Cooling Tower (Temperature-drop effect of a water in reservoir)

日本設計工学会東海支部研究発表講演会講演論文集, 56-58, 2018
Prototype of an Inexpensive Performance Testing System for Gasoline Engine

日本設計工学会東海支部研究発表講演会講演論文集, 6-8, 2018
Performance Improvement for the Engine of the Economy-run Car

日本設計工学会東海支部研究発表講演会講演論文集, 13-15, 2018
Droplet-Measurement Accuracy using Immersion Liquid Method (Effect of immersion-liquid depth on droplet-sampling velocity)

日本設計工学会東海支部研究発表講演会講演論文集, 3-5, 2018
Cooling Effect of the Simple Cooling Tower

日本設計工学会東海支部研究発表講演会講演論文集, 42-44, 2018
オリフィスノズル形状が自由噴流平均速度場に及ぼす影響

廣森幸太, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2016, 2017
マイクロバブルの粒径測定(気泡径に及ぼす空気流入量の影響)

藤松孝裕, 早川洋人, 鬼頭みずき, 近藤邦和, 梅山和希

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2016, 2017
CO₂冷媒を用いた次世代冷凍機の効率改善 : 冷却塔の最適化条件について

横山光志郎, 鬼頭みずき, 近藤邦和, 藤松孝裕

6-8, 2017
Mist Cooling Effect in a Rectangular Flow Channel

日本設計工学会東海支部研究発表講演会講演論文集, 53-55, 2017

Books and Other Publications

Heat Transfer, Heat Transfer Enhancement of Impinging Jet by Notched Orifice Nozzle

Shakouchi, T, Kito, M

Presentations

Study on the Economy-run Car Engine (Effect of Cam Shape on Fuel Consumption)

岩根直也, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2022
Gas-Liquid Two Phase Flow in a Horizontal Pipe with a Sudden Contracted Area

田村壮志, 宇藤圭駿, 鬼頭みずき, 近藤邦和, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2022
Effects of Sub-flows with an Angle on a Main Jet Flow

古川慧一, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2022
Thermo-fluid Analysis on Temperature-drop Effect of a Water in Reservoir

辻凌也, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2021
A Prototype Nozzle with Variable Sub-flows

杉野将太, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2021
断面積が急縮小する水平管内気液二相流動の観察—Gas-Liquid Two Phase Flow in a Horizontal Pipe with a Sudden Contracted Area

2021
低燃費競技用エンジンに関する研究(燃料消費量に及ぼすカム形状の影響)—Study on the Economy-run Car Engine (Effect of Cam Shape on Fuel Consumption)

2021
Flow Simulation in the Cylinder of the Economy-run Car Engine

辻本臣, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2020
Droplet-Measurement Accuracy using Immersion Liquid Method (Effect of immersion-liquid depth)

日本設計工学会東海支部研究発表講演会講演論文集, 2020, 日本設計工学会東海支部
TWO PHASE FLOW PHENOMENA IN A HORIZONTAL PIPE WITH A SUDDEN CONTRACTION – EFFECTS OF CONTRACTION RATIO ON FILM BEHAVIOUR –

FUJIMATSU Takahiro, KITO Mizuki, KONDO Kunikazu

Multiphase Flow 2019, 10th International Conference on Computational & Experimental Methods in Multiphase & Complex Flow, May 21, 2019
Free jet flows from Triangular Orifice Nozzles

日本設計工学会東海支部研究発表講演会講演論文集, 2019, 日本設計工学会東海支部
共鳴オリフィスノズル衝突噴流の伝熱特性

和田健吾, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2018
副噴流を有するオリフィス自由噴流の流動特性

菅原輝, 上林祥大, 鬼頭みずき, 藤松孝裕, 服部俊, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2018
流路内におけるバイオフィルムの生成

岩塚隆之佑, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2018
円柱間を通過する噴流が加熱面冷却に及ぼす影響について

藤方郷, 鬼頭みずき, 藤松孝裕, 近藤邦和

日本設計工学会東海支部研究発表講演会講演論文集(CD-ROM), 2018
Droplet-Measurement Accuracy using Immersion Liquid Method (Effect of immersion-liquid depth on droplet-sampling velocity)

坂下竣一, 荻野徹, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集, 2018
Performance Improvement for the Engine of the Economy-run Car

森川智裕, 近藤邦和, 中村勇志, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集, 2018
Prototype of an Inexpensive Performance Testing System for Gasoline Engine

高坂壮偉, 鈴木拓海, 近藤邦和, 中村勇志, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集, 2018
Cooling Effect of the Simple Cooling Tower

長谷川智也, 若林拓海, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集, 2018
Internal Flow Analysis of the Cooling Tower (Temperature-drop effect of a water in reservoir)

辻凌也, 近藤邦和, 鬼頭みずき, 藤松孝裕

日本設計工学会東海支部研究発表講演会講演論文集, 2018

Research Projects

Dynamic control of multiple jets using low-dimensional model

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, Apr, 2013 - Mar, 2016

TSUJIMOTO KOICHI, ANDO TOSHITAKE, SHAKOUCHI TOSHIHIKO, KITO MIZUKI
Development on mixing control of multiple jets base on the construction of low-dimensional model

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, 2010 - 2012

TSUJIMOTO Koichi, ANDO Toshitake, SHAKOOUHI Toshihiko, KITO Mizuki
衝突噴流冷却特性（ノズル・衝突面角度の影響）

Profile Information

Research Interests

Research Areas

Committee Memberships

Papers

Misc.

Books and Other Publications

Presentations

Research Projects

Menu

Coauthors