The vibration/noise of gears is influenced by micrometer-order tooth pitch deviation, and therefore advanced quality control is needed in the gear manufacturing process using measuring instruments. The accuracy of the pitch measuring instrument is verified using a master gear or artifact, but its accuracy is not sufficiently high, and its manufacture is difficult. In our previous report, a novel pitch artifact named the magnetically self-aligned multiball pitch artifact, in which elements with simple geometries are aligned spontaneously by a magnetic force, was proposed for the calibration of pitch measuring instruments. The parts comprising the artifact, which consist of balls, a cylinder, and a plane, have simple geometries and can be manufactured with accuracies on the order of several tens of nanometers. Therefore, this artifact can also have high accuracy. In addition, because it undergoes self-alignment by a magnetic force, it has the advantage of easy assembly. An appropriate calibration method for this artifact using a coordinate measuring machine is proposed, and the accuracy of the artifact is evaluated in this report. The repeatability of pitch measurements when the artifact is disassembled and reassembled is investigated, and the results show high repeatability. A measurement experiment using a pitch measuring instrument is performed. These experiments verified that the calibration and measurement of the proposed pitch artifact are possible with high repeatability. (C) 2015 Elsevier Inc. All rights reserved.