NISHIKAWA Naohiro

J-GLOBAL         Last updated: Jun 8, 2019 at 03:34
 
Avatar
Name
NISHIKAWA Naohiro
Affiliation
Iwate University
Degree
Doctor of Philosophy in Engineering(Okayama University), Master of Engineering(Okayama University), Bachelor of Engineering(Okayama University)

Research Areas

 
 

Academic & Professional Experience

 
Dec 2014
   
 
Visiting Professor, Ultra Precision Machining Center, Zhejiang University of technology
 
Apr 2007
   
 
Assistant Professor, Iwate University
 
Apr 2006
 - 
Mar 2007
Assistant, Iwate University
 
Apr 2003
 - 
Mar 2006
Graduate Student, Graduate School of Natural Science and Technology (Doctor's Course), Division of Manufacturing System and Physical Science, Okayama University
 
Apr 2001
 - 
Mar 2003
Graduate Student, Graduate School of Natural Science and Technology (Master's Course), Mechanical and System Engineering, Okayama University
 
Apr 1997
 - 
Mar 2001
Student, Department of Mechanical Engineering, Okayama University
 

Education

 
Apr 2003
 - 
Mar 2006
Division of Manufacturing System and Physical Science, Graduate School of Natural Science and Technology (Doctor's Course), Okayama University
 
Apr 2001
 - 
Mar 2003
Mechanical and System Engineering, Graduate School of Natural Science and Technology (Master's Course), Okayama University
 
Apr 1997
 - 
Mar 2001
Department of Mechanical Engineering, Faculty of Engineering, Okayama University
 

Awards & Honors

 
Jul 2018
Development of the Water Machining System (the Electric Rust Preventive Machining System) - Clean Ultra Precision Machining with Using Water Machine Tool System for Sustainable Manufacturing-, Young Researcher Award, KSPE(Korean Society for Precision Engineering) at PRESM2018 International Symposium on Precision Engineering and Sustainable Manufacturing
Winner: Naohiro Nishikawa
 
Aug 2016
“Development of the Electric Rust Preventive Machining Method System – Evaluation of Practical Use about the Water Machining System for Clean Ultra Precision Machining and Green Manufacturing –”, Technology Award, The 9th MIRAI Conference on Microfabrication and Green Technology (9th MIRAI (Manufacturing Institute for Research on Advanced Initiatives), 2016)
Winner: NNaohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, Shinya Tsukamoto
 
Oct 2015
Title “Machining System for Using Water as Machining Fluid”, The 51th Iwate Prefecture Invention and Innovation Exhibition [General Categories] Iwate Prefecture Governor's Prize (Grand Prize), Iwate Prefecture, Morioka Chamber of Commerce and Industry, Iwate Institute of Invention and Innovation
Winner: Naohiro NISHIKAWA
 
Oct 2014
“Development of the Electric Preventive Machining Method System -Water Machining System for Sustainable Development and Clean Ultra Precision Machining”, Best Paper Award, 10th CJUMP, 2014 (The 10th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP), 2014 International Conference on Surface Finishing Technology (ICSFT))
Winner: Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, Shinya Tsukamoto
 
May 2014
“Total Development of the Electric Rust Preventive Machining Method System (Water Machining System) with Using Water as Machining Fluid (Coolant, Lubricant) for Machine Tool System”, 13th Intelligent Cosmos Encouragement Prize, Intelligent Cosmos Academic Foundation
Winner: Naohiro NISHIKAWA
 
Apr 2014
“Development of a Series of the Electric Rust Preventive Machining Method System for Using Water as Machining Fluid” (Translation), The Commendation for Science and Technology by the Minister of Education, Culture, Sports, Science and Technology The Young Scientists’ Prize, MINISTRY OF EDUCATION, CULTURE, SPORTS, SCIENCE AND TECHNOLOGY-JAPAN
Winner: Naohiro NISHIKAWA
 
Mar 2014
“Development of Water Machining System for New Century Green Manufacturing - Integration of Electric Rust Preventive Machining Method System -”,, Paper Award, The 7th MIRAI Conference on Microfabrication and Green Technology
Winner: Naohiro Nishikawa
 
Feb 2014
Development of Water Machining System and Derivatives: Building of Product & Purification Business with Resource Conservation and Environmental Harmony and Development of Industrial Supply System (Translation of Japanese), Koshuha Neturen Award, Shinagawa Business Club
Winner: Naohiro NISHIKAWA
 
Sep 2013
“Proposal and Development of the Electric Rust Preventive Machining Method System for High Safety Environmentally Friendly Manufacturing Machine Tool System with Using Water as Machining Coolant”, JSPE Young Engineer Award, The Japan Society for Precision Engineering (JSPE)
Winner: Naohiro NISHIKAWA
 
Mar 2013
“Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Staphylococcus aureus ) -”, EXCELLENT PAPER AWARD, CJUMP2013 Review Committee of Award: Japan Society for Precision Engineering (JSPE) -Committee for nano-precision mechanical manufacturing technology, Chinese Production Engineering Institution (CMES (CPEI)), Gyeongnam National University of Science and T
Winner: Dr. Naohiro Nishikawa, Iwate University, Japan Katsuhiko Omoe, Kenji Murakami, Ikunori Naitou, Akira Yano, Tatsuya Miura, Atsushi Yoshida, Takekazu Sawa, Yoshinori Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Ts
 
Aug 2012
“Proposal and Development Investigation of a Series of the Electric Rust Preventive Machining Method System with Water and Corrosion Proof Machining Machine and Ultra High Precision Machining Water Purification Recycling Filtration System and so on for th, JSAT Encouragement Award, The Japan Society for Abrasive Technology (JSAT)
Winner: Naohiro NISHIKAWA
 
Jul 2012
“Development of Electric Rust Preventive Machining Method System”, EXCELLENT YOUNG RESEARCHER AWARD, nanoMan2012: International Society for Nanomanufacturing (ISNM), Japan Society for Nanomanufacturing (JSNM)
Winner: Naohiro Nishikawa
 
Apr 2012
“Investigation of Electric Rust Preventive Machining Method Friendly to Human and Environment with Ultra-Low Environmental Load and Resource Saving using Water as Machining Fluid”, JSME Young Engineers Award, The Japan Society of Mechanical Engineers (JSME)
Winner: Naohiro NISHIKAWA
 
Mar 2012
“Development of electric rust preventive machining method -Proposal for a machining water recycling system-”, JSAT Kumagai Paper Award, The Japan Society for Abrasive Technology (JSAT)
Winner: N. Nishikawa, Y. Sato, T. Katou, K. Karita, T. Iyama, M. Mizuno, N. Yoshihara, Y. Hagihara and S. Tsukamoto
 
Oct 2011
Application of electric rust preventive machining method - Estimation of purification performance about machining water with removal of contaminants- (Translation of Japanese), Presentation Excellence Award, The Japan Society for Precision Engineering Tohoku Branch Office
Winner: Naohiro NISHIKAWA
 
Oct 2010
Development of electric rust preventive machining method - For zero emission- (Translation of Japanese), Presentation Award, Society of Environmental Conservation Engineering
 
Feb 2010
Development of electric rust preventive machining method (Translation of Japanese), IWAKI AWARD (Encouragement Award), Non-Profit Organization Precision Engineering and Science Network, Tribo-Coating Forum
Winner: Naohiro NISHIKAWA
 
Mar 2010
For Contribution to Student Membership Development (Translation of Japanese), JSME Certificate for Contribution to Student Membership Development, The Japan Society of Mechanical Engineers
Winner: Naohiro NISHIKAWA
 

Published Papers

 
####Thesis
NISHIKAWA Naohiro
   [Refereed]
NISHIKAWA Naohiro
Okayama University   pp. 1-126   Mar 2006   [Refereed]
####Paper
NISHIKAWA Naohiro
   [Refereed]
Development of Water Machining System for New Century Green Manufacturing - Integration of Electric Rust Preventive Machining Method System -
Naohiro Nishikawa
Advanced Micro-Fabrication and Green Technology Transaction of MIRAI   Vol. 3 pp. 76-81   Mar 2014   [Refereed]
Development of electric rust preventive machining method system – safe water using for machining fluid: complete removal of bacteria (Legionella pneumophila) and assay
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami and Yusuke Sato’o, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama and Masahiro Mizuno, Shinya Tsukamoto
International Journal of Nanomanufacturing   Vol.10(Nos. 1/2) pp.185-200   Feb 2014   [Refereed]
Development of an Innovative Water Machining System Employing the Electric Rust Preventive Method - Precise Evaluation of Purity of the Refined Water with a Laser Turbidity Meter -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
Advanced Materials Research   Vol. 797 pp 293-298   Sep 2013   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Enterobacter aerogenes ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Sato, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Journal of Precision Engineering and Manufacturing   Vol. 14(No. 6) pp 897-902   Jun 2013   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Staphylococcus aureus ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Ikunori Naitou, Akira Yano, Tatsuya Miura, Atsushi Yoshida, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Advancement in Ultraprecision Machining Process   Vol.1 pp. 24-28   Mar 2013   [Refereed]
Development of Electric Rust Preventive Machining Method - Improvement of Electric Rust Preventive Chip Sedimentation System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
Key Engineering Materials   Vols. 523-524 pp.979-984   Nov 2012   [Refereed]
Development of Electric Rust Preventive Machining Method - Optimization of Water Recycle System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
Key Engineering Materials   Vols. 523-524 pp.973-978   Nov 2012   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Legionella Pneumophila ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Satou, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Society for Nanomanufacturing, The International State-of-the-art in nanoManufacturing: nanoMan2012   pp.325-330   Jul 2012   [Refereed]
Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Adjusted Synthesized Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto
Advanced Materials Research   Vol. 497 pp 373-381   Apr 2012   [Refereed]
Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Deionized Refined Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto,
Advanced Materials Research   Vol. 497 pp 365-372   Apr 2012   [Refereed]
Application of electric rust preventive machining method - Removal of contaminants from machining water -
N. Nishikawa, Y. Sato, K. Kudou, T. Murase, Y. Hagihara, N. Yoshihara, H. Kato, H. Okawai, K. Karita, T. Iyama, M. Mizuno and S. Tsukamoto
Journal of the Japan Society for Abrasive Technology   Vol.56(No.2) pp.102-107   Feb 2012   [Refereed]
Development of electric rust preventive machining method - Evaluation of influence on rust prevention with water of different regions -
N. Nishikawa, Y. Sato, K. Kudo, T. Murase, Y. Hagihara, N. Yoshihara, H. Kato, H. Okawai, K. Karita, T. Iyama, M. Mizuno and S. Tsukamoto
Journal of the Japan Society for Abrasive Technology   Vol.55(No.11) pp.656-661   Nov 2011   [Refereed]
Development of Electric Rust Preventive Machining Method-Water using for Machining: Improvement of Water Recycle System-
N. Nishikawa, Y. Sato, T. Kato, K. Karita, Y. Hagihara, N. Yoshihara, H. Okawai, H. Kato, T. Iyama, M. Mizuno and S. Tsukamoto
Advanced Materials Research   Vol. 325 pp.699-704   Aug 2011   [Refereed]
Basic Development of Electrochemical Machining (Part 2) -Electrolyte Metal Deposit using platinum probe electrode-
Naohiro NISHIKAWA, Shinnosuke SATO, Yoshinori SATO, Yoshihiro HAGIHARA, Hiromasa KATO, Nobuhito YOSHIHARA, Toshirou IYAMA, Masahiro MIZUNO and Hidenobu MIFUNE
Journal of the Japan Society of Advanced Production Technology   Vol.29(No.1) pp.76-81   Jul 2011   [Refereed]
Basic Development of Electrochemical Machining (Part 1) -Facile Small Additive Machining with Local Electroplating-
Naohiro NISHIKAWA, Shinnosuke SATO, Yoshinori SATO, Yoshihiro HAGIHARA, Hiromasa KATO, Nobuhito YOSHIHARA, Toshirou IYAMA, Masahiro MIZUNO and Hidenobu MIFUNE
Journal of the Japan Society of Advanced Production Technology   Vol.29(No.1) pp.70-75   Jul 2011   [Refereed]
Development of electric rust preventive machining method - Verification of the optimized rust prevention current and electrical characteristic with supporting electrode in grinding -
N.Nishikawa, Y.Sato, T.Kato, K.Karita, Y.Hagihara, N.Yoshihara, H. Okawai, H. Kato, T. Iyama, M. Mizuno and S. Tsukamoto
Journal of the Japan Society for Abrasive Technology   Vo.55(No.5) pp.290-297   May 2011   [Refereed]
Development of electric rust preventive machining method Rust prevention of workpiece and machine body
N. Nishikawa, Y. Sato, T. Kato, K. Karita, T. Iyama, M. Mizuno, N. Yoshihara, Y. Hagihara and S. Tsukamoto
Journal of the Japan Society for Abrasive Technology   Vol.55(No.3) pp.167-172   Mar 2011   [Refereed]
Development of electric rust preventive machining method - Proposal for a machining water recycling system -
N. Nishikawa, Y. Sato, T. Katou, K. Karita, T. Iyama, M. Mizuno, N. Yoshihara, Y. Hagihara and S. Tsukamoto
Journal of the Japan Society for Abrasive Technology   Vol.54(No.10) pp.603-606   Oct 2010   [Refereed]
Basic Investigation of Environmental Harmonic Machining - Examination of various low pollution machining methods and effectiveness verification of half underwater grinding -
N. Nishikawa, S. Tsukamoto, K. Ohashi, T. Nakajima, T. Iyama, M. Mizuno, Y. Ota, T. Kubo
Journal of Environmental Conservation Engineering   Vol.38(No.6) pp.415-423   Jun 2009   [Refereed]
Development of Electric Rust Prevention Machining Method in End Mill Cutting - Environmental Harmonic Machining Using Water in Cutting Machining -
N. Nishikawa, S. Tsukamoto, K. Ohashi, R. Miyake, T. Iyama and M. Mizuno
Journal of Environmental Conservation Engineering   vol.37(No.4) pp.274-281   Apr 2008   [Refereed]
Development of electric rust preventive machining method in internal grinding -Proposal on an environment-friendly machining using water instead of grinding fluid-
N. Nishikawa, K. Ohashi, K. Yoshihara and S. Tsukamoto
Journal of Environmental Conservation Engineering   vol.35(No.6) pp.452-459   Jun 2006   [Refereed]
Development of electric rust preventive storage method in water -Proposal of metal parts storage using water without rust preventive agent or oil-
N. Nishikawa, K. Ohashi, M. Sudoh, S. Tsukamoto
Journal of Environmental Conservation Engineering   vol.35(No.5) pp.371-377   May 2006   [Refereed]
Proposal of Electricity Rust Preventive Machining Method in Cylindrical Grinding -Antirust Effect of Workpiece in Grinding with Water-
S. Tsukamoto, K. Ohashi, N. Nishikawa, M. Sudou, T. Kubo and T. Nakajima
Journal of the Japan Society for Precision Engineering   Vol.71(No.3) pp.337-341   Mar 2005   [Refereed]
Development of the Electricity Rust Preventive Machining Method in Surface Grinding
S. Tsukamoto, N. Nishikawa, K. Okamoto and K. Ohashi
Key Engineering Materials   Vols. 257-258 pp.483-488   Feb 2004   [Refereed]
####Proceedings (Refereed)
   [Refereed]
Development of the Electric Rust Preventive Machining Method System -Clean Ultra-Precision Machining for Global Environmental Friendly Manufacturing with Water Machining System by Using Water as Coolant-
Naohiro Nishikawa, Julong Yuan, Takekazu Sawa, Wei Hang, Chengwu Wang, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno, and Shinya Tsukamoto
Proceedings of The 14th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2018)   pp. S3-5-1-S3-5-6   Sep 2018   [Refereed]
Development of the Electric Rust Preventive Machining Method System - Advanced Green Factory and Clean Ultra Precision Machining with the Water Machining-
Naohiro Nishikawa, Julong Yuan, Takekazu Sawa, Wei Hang, Chengwu Wang, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno, and Shinya Tsukamoto
Advanced Micro-Fabrication and Green Technology, Transaction of MIRAI   Vol.6 p.4-9   Jul 2018   [Refereed]
Development of the Electric Rust Preventive Machining Method System - Performance and Extension of Water Machining for Clean Ultra-Precision Machining and Sustainable Development in Industry-academia Cooperative Investigation -
Naohiro Nishikawa
Proceedings of The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017)   p.93-98   Nov 2017   [Refereed]
Development of the Electric Rust Preventive Machining Method System – Ultra-Precision Machining and Sustainable Development with Clean Water Machining for Future Green Factory -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
Proceedings of the 12th CJUMP Conference   p.168-175   Nov 2016   [Refereed]
Development of the Electric Rust Preventive Machining Method System – Evaluation of Practical Use about the Water Machining System for Clean Ultra Precision Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
Advanced Micro-Fabrication and Green Technology, Transaction of MIRAI2016   Vol.4 p.72-77   Aug 2016   [Refereed]
Development of the Electric Rust Preventive Machining Method System - New Generation System for High Performance Water Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
Proceedings of the 8th MIRAI Conference   p.98-103   Mar 2015   [Refereed]
Development of Electric Rust Preventive Machining Method System -Image analysis and calculation on Particle Removal for Recycling Water-
Naohiro NISHIKAWA, Takekazu SAWA, Yoshihiro HAGIHARA, Nobuhito YOSHIHARA, Hiroaki OKAWAI, Masahiro MIZUNO, Toshirou IYAMA and Shinya TSUKAMOTO
proceedings of ICPE2014 (non title, USB)   D10, pp. 478-483   Jul 2014   [Refereed]
####Proceedings (Not Refereed)
Development of the Water Machining System (the Electric Rust Preventive Machining System) - Clean Ultra Precision Machining with Using Water Machine Tool System for Sustainable Manufacturing-
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
International Symposium on Precision Engineering and Sustainable Manufacturing (PRESM2018) (PRESM2018 e-Proceeding (USB))   KS004, Keynote Speech 4   Jul 2018
The Water Machining System (the Electric Rust Preventive Machining Method System) with Clean Ultra-Precision Machining for Sustainable Development in Factory and Environment
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
ISMNM2018 proceedings (non title) (USB)   (non page numbers)   May 2018
Development of the Electric Rust Preventive Machining Method System – Water Machining System for Future Sustainable Development with Clean Ultra Precision Machining in Factory-
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno and Shinya Tsukamoto
Advanced Micro-Fabrication and Green Technology, Transaction of MIRAI2017   Vol.5 p.96   Jun 2017
Development of the Electric Rust Preventive Machining Method System-High Capability of Water Machining for Ultra Precision, Productivity and Sustainable Development-
Naohiro Nishikawa, Takekazu Sawa , Nobuhito Yoshihara , Hiroaki Okawai , Masahiro Mizuno and Shinya Tsukamoto
International Advancement in Ultraprecision Machining Process   Vol.3 p.69   Nov 2015
Investigation of the Water Machining (the Electric Rust Preventive Machining Method) System for Ultra Precision Machining and Sustainable Development
Naohiro Nishikawa
ISMNM2014 proceedings (non title)   (non page numbers)   Apr 2014
Development of Electric Rust Preventive Machining Method - Ultra-low environmental load machining method for only water use as machining fluid -
N Nishikawa
NPG2012 The 1st International Conference On Next Generation Methodology Production For Green Technology and Science   p.41-83   Jan 2012
Development of Electric Rust Preventive Machining Method for New Environmental Harmonic Machining Only Using Water
N. NISHIKAWA, T. IYAMA, M. MIZUNO, H. MIFUNE
Conference Proceedings 2009 9th international conference of the european society for precision engineering and nanotechnology   Volume II pp.542-545   Jun 2009
Development of Electric Rust Preventive Machining Method in Cylindrical Grinding
Naohiro NISHIKAWA, Kazuhito OHASHI, Shinya TSUKAMOTO and Toshikatsu NAKAJIMA
Proceedings of LEM21 Conference   Vol.2(No.05-204) pp.653-658   Oct 2005
####International Symposium
Watch at Japanese Page
エンドミル切削における電気防錆加工法の開発─切削加工における水のみを使用した環境調和型加工法─
37(4) 274-281   Apr 2008   [Refereed]
内面研削における電気防錆加工法の開発─加工液に水のみを使用するエコマシニングの提案─(共著)
35(6) 452-459   Jun 2006   [Refereed]
Approach for maximizing a production rate in a high quality and precision relay machining-assembly production system(jointly worked)
T. Iyama, M. Mizuno, N. Nishikawa
Proceedings of the 7th Euspen International Conference- Bremen   2 493-496   May 2007   [Refereed]
円筒研削における電気防錆加工法の提案―水供給における工作物の防錆効果の実験的検証―(共著)
71(3) 337-341   Mar 2005   [Refereed]
Development of a Three-Dimensional Tool Oscillation System for Finishing Metal Molds
M. Mizuno, T. Iyama, X. Zhang, N. Nishikawa
Key Engineering Materials   389/390 302-307   Sep 2009   [Refereed]
Lapping of EDM processed tool steel surfaces using three-dimentional figure-8 tool motion
M.Mizuno,T.Iyama, N.Nishikawa, H.Miune
1 130-133   Jun 2009   [Refereed]
Development of Electric Rust Preventive Machining Method for New Environmental Harmonic Machining Only Using Water
N. NISHIKAWA, T. IYAMA, M. MIZUNO, H. MIFUNE
conference proceedings of euspen   2 542-545   Jun 2009   [Refereed]
環境調和型加工法の基礎的研究─各種低公害加工法の検討と半水中研削法の有効性検証─
38(6) 415-423   Jun 2009   [Refereed]
Development of Electric Rust Preventive Machining Method in Cylindrical Grinding "jointly worked"
2(05-204) 653-658   Oct 2005
Development of the Electricity Rust Preventive Machining Method in Surface Grinding "jointly worked"
257-258 483-488   Jan 2004   [Refereed]
電気防錆水中保管法の開発─防錆剤・油剤を使わない水による金属部品保管法の提唱─(共著)
35(5) 371-377   May 2006   [Refereed]
電気防錆加工法の研究開発─水循環システムの提案─
54(10) 603-606   Oct 2010   [Refereed]
電気防錆加工法の開発 工作物および加工機筐体の防錆
55(3) 167-172   Feb 2011   [Refereed]
電気防錆加工法の開発─研削盤における補助電極による最適防錆電流と電気特性の検証─
55(5) 290-297   May 2011   [Refereed]
電気化学的加工法の基礎的研究開発(第1報)-局所電解析出による簡易的小規模付加加工-
29(1) 70-75   Jul 2011   [Refereed]
電気化学的加工法の基礎的研究開発(第2報)-白金プローブ電極使用による電解液金属析出-
29(1) 76-81   Jul 2011   [Refereed]
適応的なテンプレートサイズによるイメージマッチング
40(4) 631-641   Jul 2011   [Refereed]
Nano-Topography Distribution on Non-Axisymmetric Aspherical Ground Surface
Nobuhito Yoshihara, Shin Fujimura, Naohiro Nishikawa, Masahiro Mizuno and Toshiro Iyama
Advanced Materials Research   325 66-71   Aug 2011   [Refereed]
Development of Electric Rust Preventive Machining Method-Water using for Machining: Improvement of Water Recycle System-
N. Nishikawa, Y. Sato, T. Kato, K. Karita, Y. Hagihara, N. Yoshihara, H. Okawai, H. Kato, T. Iyama, M. Mizuno and S. Tsukamoto
Advanced Materials Research   325 699-704   Aug 2011   [Refereed]
電気防錆加工法の開発研究─各地の水による防錆への影響─
55(11) 656-661   Nov 2011   [Refereed]
Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Deionized Refined Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto
Advanced Materials Research   497 365-372   Apr 2012   [Refereed]
Development of Electric Rust Preventive Machining Method - Correspond to Difference of Water in World: Use of Adjusted Synthesized Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto
Advanced Materials Research   497 373-381   Apr 2012   [Refereed]
電気防錆加工法の応用研究-加工水からの混入物質の除去検討-
56(2) 102-107   Feb 2012   [Refereed]
Optimization of grinding conditions based on grinding theories
Nobuhito Yoshihara, Naohiro Nishikawa, Masahiro Mizuno, Toshirou Iyama, Jiwang Yan and Tsunemoto Kuriyagawa
Proceedings of International Symposium on Micro/Nano Mechanical Machining and Manufacturing (ISMNM2010)   196-203   Aug 2010   [Refereed]
Roughness of high-speed reciprocation profile ground surface
Nobuhito YOSHIHARA, Kyohei HOROYA, Naohiro NISHIKAWA, Masahiro MIZUNO and Toshirou IYAMA
Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century   CD-ROM   Nov 2011   [Refereed]
Development of Electric Rust Preventive Machining Method - Ultra-low environmental load machining method for only water use as machining fluid -
N Nishikawa
NPG2012 The 1st International Conference On Next Generation Methodology Production For Green Technology and Science   41-83   Jan 2012   [Refereed]
Lapping of EDM processed tool steel surfaces using modified figure-8 tool motion
Proceedings of the 11th euspen International Conference      May 2011   [Refereed]
Optimal Strategy for Producing a High Quality Relay in a Machining-assembly Production System Applied a Corrective Assembly Approach
T.Iyama, M.Mizuno, N.Yoshihara, N.Nishikawa
Proceedings of the 11th euspen International Conference   2 265-268   May 2011   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Enterobacter aerogenes ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Sato, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING   14(6) 897-902   Jun 2013   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Legionella Pneumophila ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Satou, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Society for Nanomanufacturing, The International State-of-the-art in nanoManufacturing: nanoMan2012   325-330   Jul 2012   [Refereed]
Development of Electric Rust Preventive Machining Method - Optimization of Water Recycle System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
Key Engineering Materials   523-524 973-978   Nov 2012   [Refereed]
Development of Electric Rust Preventive Machining Method - Improvement of Electric Rust Preventive Chip Sedimentation System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
Key Engineering Materials   523-524 979-984   Nov 2012   [Refereed]
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Staphylococcus aureus ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Ikunori Naitou, Akira Yano, Tatsuya Miura, Atsushi Yoshida, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Advancement in Ultraprecision Machining Process   1 24-28   Mar 2013   [Refereed]
Development of an Innovative Water Machining System Employing the Electric Rust Preventive Method - Precise Evaluation of Purity of the Refined Water with a Laser Turbidity Meter -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
Advanced Materials Research   797 293-298   Sep 2013   [Refereed]
Development of Water Machining System for New Century Green Manufacturing - Integration of Electric Rust Preventive Machining Method System -
Naohiro Nishikawa
Advanced Micro-Fabrication and Green Technology Transaction of MIRAI   3 76-81   Mar 2014   [Refereed]
Development of electric rust preventive machining method system – safe water using for machining fluid: complete removal of bacteria (Legionella pneumophila) and assay
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami and Yusuke Sato’o, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama and Masahiro Mizuno, Shinya Tsukamoto
International Journal of Nanomanufacturing   10(Nos. 1/2) 185-200   Feb 2014   [Refereed]
Effect of the grain depth of cut on cross sectional profile - Theoretical analysis of ground surface roughness -
Nobuhito Yoshihara, Hiroaki Murakami, Naohiro Nishikawa Masahiro Mizuno and Toshirou Iyama
Advanced Materials Research   565 28-33   Sep 2012   [Refereed]
Lapping of EDM-processed V-Groove Array Using Three-dimensional Tool Motion
M.Mizuno, N.Sato, T.Iyama, N. Yoshihara, N.Nishikawa
Proceedings of the 13th euspen International Conference   2 96-100   May 2013   [Refereed]
Optimal strategies for corrective assembly approach applied to a high-quality relay production system
Toshirou Iyama, Masahiro Mizuno, Kenneth N. McKay, Nobuhito Yoshihara, Naohiro Nishikawa
Computers in Industry   64(5) 556-564   Jun 2013   [Refereed]
Grinding characteristics of high-speed reciprocation profile grinding
Nobuhito Yoshihara, Kyohei Horoya, Naohiro Nishikawa, Masahiro Mizuno and Toshirou Iyama
Proceedings of the 7th International Conference on Leading Edge Manufacturing in 21st Century   7 519-522   Nov 2013   [Refereed]
教育用に適した3次元ゲームライブラリとそれによる創生教育
60(6) 74-80   Nov 2012   [Refereed]
教育用に適した3次元ゲームライブラリを用いた実習の評価・検証
60(6) 81-86   Nov 2012   [Refereed]
スケルトンを利用したシュリンクラップとそれに適したモルフォロジカルスケルトン
J96-D(1) 46-60   Jan 2013   [Refereed]
ボーン位置合わせとスケルトンを利用したシュリンクラップ
J96-D(9) 2059-2069   Sep 2013   [Refereed]
Formulation and Improvement of SBS+ Method
Vol.J97-D(No.8) 1318-1335   Aug 2014   [Refereed]
Evaluation of Grinding Performance By Mechanical Properties of Super Abrasive Wheel -Relationship Between Modulus of Rupture and Critical Grain Holding Power (2nd report)-
Takekazu Sawa, Naohiro Nishikawa and Yasushi Ikuse
Advanced Materials Research   Vol. 1017 267-272   Sep 2014   [Refereed]
Evaluation of the grinding performance according to the mechanical properties of a superabrasive wheel -1st report: Estimation of critical grain holding power of resinoid bond diamond wheel-
Vo.59(No.3) 134-139   Mar 2015   [Refereed]
Evaluation of grinding performance according to the mechanical properties of superabrasive wheel -2nd report: Relationship between grinding performance and mechanical properties of the grain layer of a resinoid bond wheel-
Vo.59(No.4) 191-196   Apr 2015   [Refereed]
Evaluation of Grinding Performance by Mechanical Properties of Super Abrasive Wheel -Evaluation of Grade by Grinding Force-
Sawa Takekazu, Nishikawa Naohiro and Ikuse Yasushi
Vols 656-6 266-270   Jul 2015   [Refereed]
Development of the Electric Rust Preventive Machining Method System - New Generation System for High Performance Water Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
98-103   Mar 2015   [Refereed]
Development of the Electric Rust Preventive Machining Method System-High Capability of Water Machining for Ultra Precision, Productivity and Sustainable Development-
Naohiro Nishikawa, Takekazu Sawa , Nobuhito Yoshihara , Hiroaki Okawai , Masahiro Mizuno and Shinya Tsukamoto
International Advancement in Ultraprecision Machining Process   Vol.3 69-69   Nov 2015
Investigation of the Water Machining (the Electric Rust Preventive Machining Method) System for Ultra Precision Machining and Sustainable Development
Naohiro Nishikawa
ISMNM2014, Proceedings of the International Symposium on Micro/Nano Mechanical Machining and Manufacturing      Apr 2014
Optimization of Grinding Conditions in Non-axisymmetric Aspherical Grinding
Nobuhito Yoshihara, Tomoharu Nakagawa, Naohiro Nishikawa and Masahiro Mizuno
Advanced Materials Research   Vol. 1017 109-113   Sep 2014   [Refereed]
Development of the Electric Rust Preventive Machining Method System – Evaluation of Practical Use about the Water Machining System for Clean Ultra Precision Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
Advanced Micro-Fabrication and Green Technology, Transaction of MIRAI2016   Vol.4 72-77   Aug 2016   [Refereed]
Development of the Electric Rust Preventive Machining Method System – Ultra-Precision Machining and Sustainable Development with Clean Water Machining for Future Green Factory -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
Proceedings of the 12th CJUMP Conference   168-175   Nov 2016   [Refereed]

Misc

 
####Introduction and explanation
Naohiro Nishikawa, et al.
Expanding Horizons : Frontier research at Iwate University   Vol.1 p.18-19   Mar 2018
This is Pamphlet about Frontier research at Iwate University.
(English version)
https://www.iwate-u.ac.jp/upload/images/frontier-research01_english.pdf
#Pamphlet Page(Japanese)
https://www.iwate-u.ac.jp/research/latest/pamphlet.html
Naohiro Nishikawa, et al.
Expanding Horizons : Frontier research at Iwate University   Vol.1 p.18-19   Jun 2017
This is Pamphlet about Frontier research at Iwate University.
(Japanese version)
https://www.iwate-u.ac.jp/research/latest/files/pamphlet/the-world-univ01.pdf
#Pamphlet Page(Japanese)
https://www.iwate-u.ac.jp/research/latest/pamphlet.html
Special feature article, Actual practice of environment and energy-saving technology in the factory, Environmental harmonic machining technology to use water as machining fluid -"Safe and Comfortable" Water machine tool system for the sustainable developm
Naohiro Nishikawa
Machine and Tool, Japan Industrial Publishing Co.,LTD.   Vol.5(No.8) p.10-17   Aug 2015
(Special feature article, State-of-the-art to support the production processing of the next generation) Development and prospect of environmental harmonic machining technology -Water machining and machining water supply system that removed bad influence f
Naohiro Nishikawa
Machine and Tool, Japan Industrial Publishing Co.,LTD.   Vol.4(No.1) p.18-25   Jan 2014
震災生活レポート : 岩手から
40(5) 312-312   May 2011
(特集 次世代の生産加工を支える最新技術)環境調和型加工技術の発展と展望——環境への悪影響を排除した水加工と加工水供給システム——
4(1) 18-25   Jan 2014
「水を加工液とするための耐水耐食加工機・超高精度加工水浄化再生濾過システムなど有した一連の電気防錆加工法システムの提唱と開発研究」のこぼれ話
57(1) 25-26   Jan 2013
特集 工場における環境・省エネ技術の実際 水を加工液に活用する環境調和型加工技術-「安全・快適」な持続可能な開発対応の水工作機械システム-
Vol.5(No.8) 10-17   Aug 2015
"話題講演②:電気的現象を援用したクリーン加工!! 未来工場をめざす持続可能開発・超精密加工のための水を加工液とする水加工(電気防錆加工法)工作機械システムの研究開発"
VOL. 76 90-100   Dec 2016
水加工(電気防錆加工法)システムに関する研究
Vol.1 18-19   Jun 2017
Research on the Water Machining (the Electric Rust Preventive Machining) System
Naohiro Nishikawa
Expanding Horizons : Frontier research at Iwate University   Vol.1 18-19   Mar 2018

Books etc

 
平成19年度科学研究費補助金実績報告書(研究実績報告書) 若手研究(スタートアップ) 水中加工を適用した電気防錆加工法の開発
Apr 2008   
科学研究費補助金研究成果報告書 若手研究(スタートアップ) 2007~2008 課題番号:19860003 水中加工を適用した電気防錆加工法の開発
Apr 2009   
平成20年度科学研究費補助金実績報告書(研究実績報告書) 若手研究(スタートアップ) 水中加工を適用した電気防錆加工法の開発
Apr 2009   
平成19年度学長裁量経費実施報告書(萌芽的教育研究支援費)マイクロ金型の創成を目指す電気化学マイクロ加工システムの開発
Apr 2008   
INSいわて金型研究会 平成20年度 報告書 マイクロ金型の創成を目指す電気化学マイクロ加工システムの開発
Apr 2009   

Conference Activities & Talks

 
####Received Award Memorial Lecture
Watch at Japanese Page
####International (Keynote)
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
PRESM2018 (International Symposium on Precision Engineering and Sustainable Manufacturing)   5 Jul 2018   
####International (Invited)
Introduction of the Water Machining for Zhejiang University of Technology 2018.9 : Development of the Water Machining System (the Electric Rust Preventive Machining Method System) -Clean Ultra Precision Machining for Manufacturing by Using Water with Ind
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
Zhejiang University of Technology, Seminar2018   16 Sep 2018   
Development of the Electric Rust Preventive Machining Method System -Clean Ultra-Precision Machining for Global Environmental Friendly Manufacturing with Water Machining System by Using Water as Coolant-
Naohiro Nishikawa, Julong Yuan, Takekazu Sawa, Wei Hang, Chengwu Wang, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno, and Shinya Tsukamoto
The 14th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2018)   15 Sep 2018   
Development of the Water Machining System (the Electric Rust Preventive Machining Method System) -Clean Ultra Precision Machining for Manufacturing by Using Water with Industry-Academic Collaboration-
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
Hunan University International Symposium 2018 “智能精密工程在新一代IC制造中的应用与发展”国际研讨会 International Symposium on Application of Intellectual Precision Engineering to Support Next Generation IC Manufacturing   12 Sep 2018   
Development of the Electric Rust Preventive Machining Method System - Advanced Green Factory and Clean Ultra Precision Machining with the Water Machining-
Naohiro Nishikawa, Julong Yuan, Takekazu Sawa, Wei Hang, Chengwu Wang, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno, and Shinya Tsukamoto
MIRAI2018 (The 11st MIRAI Conference on Microfabrication and Green Technology (11st MIRAI (Manufacturing Institute for Research on Advanced Initiatives), 2018))   4 Jul 2018   
Development of Water Machining System (Electric Rust Preventive Machining System) - Application to Internal Grinding -
Naohiro Nishikawa
The 9th Xihu Swording Salon (第九届西湖论剑沙龙・国际智能精密制造产学研合作论坛)   25 Dec 2017   
Development of the Water Machining System (the Electric Rust Preventive Machining Method System) in New Machine Tool System for Future Clean Ultra-Precision Fabrication with Industry-Academic Cooperation
Naohiro Nishikawa
China-Japan Ultra-Precision Manufacturing Technology Forum (中日超精密制造技术高峰论坛)   18 Nov 2017   
Development of the Electric Rust Preventive Machining Method System - Ultra Precision & Clean Fabrication with Water Machining based on Academic-Industry Cooperative Investigation -
Naohiro Nishikawa
New Technology and Transfer (慶南科技大学校産学交流会議)   30 Jun 2017   
Development of the Electric Rust Preventive Machining Method System – Water Machining System for Future Sustainable Development with Clean Ultra Precision Machining in Factory-
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Masahiro Mizuno and Shinya Tsukamoto
The 10th MIRAI Conference on Microfabrication and Green Technology (10th MIRAI (Manufacturing Institute for Research on Advanced Initiatives), 2017)   28 Jun 2017   
The Water Machining System (the Electric Rust Preventive Machining Method System) as New Machine Tool System -Introduction and Development of Practical and Application Use with Academia-Industry Cooperation-
Naohiro NISHIKAWA
The 8th Xihu Swording Salon (第八届西湖论剑沙龙・国际智能精密制造产学研合作论坛)   25 Dec 2016   
Development of the Electric Rust Preventive Machining Method System - Water Machining System for Sustainable Development and Clean Ultra Precision Machining -
Naohiro NISHIKAWA, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno and Shinya Tsukamoto
CJUMP2014 (The 10th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP), 2014 International Conference on Surface Finishuing Technology (ICSFT))   19 Oct 2014   
Grinding System for Rust-Less Clean Surface with Electric Rust Preventive Method
Naohiro NISHIKAWA
2014 CIRP JANUARY MEETINGS IN PARIS, FRANCE, STC G   24 Jan 2014   
Development of Electric Rust Preventive Machining Method System for Ultra Clean Fabrication
Naohiro Nishikawa
The 1st ISNM Winter School Fundamentals and Applications of Nanomanufacturing   29 Jan 2013   
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Sato, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
International Symposium on Green Manufacturing and Applications (ISGMA2012)   28 Aug 2012   
Development of Electric Rust Preventive Machining Method - Ultra-low environmental load machining method for only water use as machining fluid -
N Nishikawa
The 1st International Conference On Next Generation Environmental Production For Green Technology and Science (1st Int. Conf. KICET 2012)   31 Jan 2012   
####Internal (Invited)
Watch at Japanese Page
####International
The Water Machining System (the Electric Rust Preventive Machining Method System) with Clean Ultra-Precision Machining for Sustainable Development in Factory and Environment
Naohiro Nishikawa, Julong Yuan, Wei Hang, Chengwu Wang
The 5th International Symposium on Micro/Nano Mechanical Machining and Manufacturing (ISMNM2018)   9 May 2018   
Development of the Electric Rust Preventive Machining Method System - Performance and Extension of Water Machining for Clean Ultra-Precision Machining and Sustainable Development in Industry-academia Cooperative Investigation -
Naohiro Nishikawa
The 13th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP2017)   21 Nov 2017   
Development of the Electric Rust Preventive Machining Method System – Ultra-Precision Machining and Sustainable Development with Clean Water Machining for Future Green Factory -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
The 12th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2016)   6 Nov 2016   
Development of the Electric Rust Preventive Machining Method System – Evaluation of Practical Use about the Water Machining System for Clean Ultra Precision Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Nobuhito Yoshihara, Yoshihiro Hagihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
The 9th MIRAI Conference on Microfabrication and Green Technology (9th MIRAI (Manufacturing Institute for Research on Advanced Initiatives), 2016)   17 Aug 2016   
Development of the Electric Rust Preventive Machining Method System-High Capability of Water Machining for Ultra Precision, Productivity and Sustainable Development-
Naohiro Nishikawa, Takekazu Sawa , Nobuhito Yoshihara , Hiroaki Okawai , Masahiro Mizuno and Shinya Tsukamoto
The 11st China-Japan International Conference on Ultra-Precision Machining Process The 2nd IOF: Itabashi Opto-Forum (CJUMP2015: 11st CJUMP and 2nd IOF)   27 Nov 2015   
Development of the Electric Rust Preventive Machining Method System - New Generation System for High Performance Water Machining and Green Manufacturing -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Masahiro Mizuno, and Shinya Tsukamoto
The 8th Manufacturing Institute for Research on Advanced Initiatives -The 8th MIRAI Conference -   25 Mar 2015   
Development of Electric Rust Preventive Machining Method System -Image analysis and calculation on Particle Removal for Recycling Water-
Naohiro NISHIKAWA, Takekazu SAWA, Yoshihiro HAGIHARA, Nobuhito YOSHIHARA, Hiroaki OKAWAI, Masahiro MIZUNO, Toshirou IYAMA and Shinya TSUKAMOTO
The 15th International Conference on Precision Engineering (ICPE2014)   23 Jul 2014   
Investigation of the Water Machining (the Electric Rust Preventive Machining Method) System for Ultra Precision Machining and Sustainable Development
Naohiro Nishikawa
International Symposium on Micro/Nano Mechanical Machining and Manufacturing (ISMNM 2014)   22 Apr 2014   
Development of Water Machining System for New Century Green Manufacturing - Integration of Electric Rust Preventive Machining Method System
Naohiro Nishikawa
The 7th MIRAI Conference on Microfabrication and Green Technology (7th MIRAI, 2014)   28 Mar 2014   
Development of an Innovative Water Machining System Employing the Electric Rust Preventive Method - Precise Evaluation of Purity of the Refined Water with a Laser Turbidity Meter -
Naohiro Nishikawa, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
ISAAT2013 IN CONJUNCTION WITH CCAT2013 The 16th International Symposium on Advances in Abrasive Technology The 17th Chinese Conference of Abrasive Technology   25 Sep 2013   
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Staphylococcus aureus ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Ikunori Naitou, Akira Yano, Tatsuya Miura, Atsushi Yoshida, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
(CJUMP 2013: Joint Conference of 9th CJUMP and 7th UPET) The 9th Cooperative and Joint international conference on Ultra-precision Machining Process, in conjunction with The 7th Conference of Ultra-Precision (ELID) Technology Research Group   29 Mar 2013   
Development of Electric Rust Preventive Machining Method - Improvement of Electric Rust Preventive Chip Sedimentation System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
14th International Conference on Precision Engineering (ICPE2012)   9 Nov 2012   
Development of Electric Rust Preventive Machining Method - Optimization of Water Recycle System -
N Nishikawa, Y Sato, F Andou, T Sawa, Y Hagihara, H Kato, N Yoshihara, H Okawai, T Murase, T Iyama, M Mizuno and S Tsukamoto
14th International Conference on Precision Engineering (ICPE2012)   9 Nov 2012   
Development of Electric Rust Preventive Machining Method System - Safe Water Using for Machining Fluid: Complete Removal of Bacteria ( Legionella Pneumophila ) -
Naohiro Nishikawa, Katsuhiko Omoe, Kenji Murakami, Yusuke Satou, Takekazu Sawa, Yoshihiro Hagihara, Nobuhito Yoshihara, Hiroaki Okawai, Toshirou Iyama, Masahiro Mizuno and Shinya Tsukamoto
The Third International Conference on nanoManufacturing (nanoMan2012)   27 Jul 2012   
Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Deionized Refined Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto
The 8th China-Japan International Conference on Ultra-Precision Machining (8th CJUPM, 2011)   21 Nov 2011   
Development of Electric Rust Preventive Machining Method- Correspond to Difference of Water in World: Use of Adjusted Synthesized Water-
N Nishikawa, Y Sato, K Kudo, T Murase, T Sawa, H Kato, N Yoshihara, H Okawai, K Karita, T Iyama, M Mizuno and S Tsukamoto
The 8th China-Japan International Conference on Ultra-Precision Machining (8th CJUPM, 2011)   21 Nov 2011   
Development of Electric Rust Preventive Machining Method-Water using for Machining: Improvement of Water Recycle System-
N. Nishikawa, Y. Sato, T. Kato, K. Karita, Y. Hagihara, N. Yoshihara, H. Okawai, H. Kato, T. Iyama, M. Mizuno and S. Tsukamoto
ISAAT2011, 14th International Symposium on Advances in Abrasive Technology   20 Sep 2011   
Development of Electric Rust Preventive Machining Method for New Environmental Harmonic Machining Only Using Water
N. NISHIKAWA, T. IYAMA, M. MIZUNO, H. MIFUNE
The 9th International Conference of the European Society for Precision Engineering & Nanotechnology   4 Jun 2009   
Development of Electric Rust Preventive Machining Method in Cylindrical Grinding
Naohiro NISHIKAWA, Kazuhito OHASHI, Shinya TSUKAMOTO and Toshikatsu NAKAJIMA
LEM21 : The 3rd International Conference on Leading Edge Manufacturing in 21st Century   Oct 2005   
Development of the Electricity Rust Preventive Machining Method in Surface Grinding
S. Tsukamoto, N. Nishikawa, K. Okamoto and K. Ohashi
ISAAT2003 : The 6th International Symposium on Advances in Abrasive Technology   Nov 2003   
####International Symposium
Watch at Japanese Page
####Internal
Watch at Japanese Page
####Other
Watch at Japanese Page
####Other2
Watch at Japanese Page
エコマシニングを実現する電気防錆加工法の原理とその効果―円筒研削における電気防錆加工法の開発―
平面研削における電気防錆加工法の開発―プール型電極法による完全防錆研削加工の実現―
内面研削における電気防錆加工法の開発―外輪型電極法によるエコマシニングの提案―
電気防錆水中保管法の提案とその防錆効果―被削材のローエミッション型保管法の開発―
ゼロエミッションを実現する電気防錆加工法の提案
電気防錆水中保管法の実用化
電気防錆加工法の実用化のための課題
究極の低公害を実現する電気防錆加工法の提案─内面研削での電気防錆加工法の開発─
エンドミル加工における電気防錆加工法の提案
電気防錆加工法&電気防錆水中保管法
電気防錆加工法&電気防錆水中保管法
外周刃ブレードによる切断加工のシミュレーション解析
ソーワイヤの走行精度の2D測定に関する研究
高精度加工組立システムにおけるマッチング挙動(リレー生産におけるバッファ導入効果)
金型生産における外注工場の利用効果
超音波振動による歯車型歯面の研磨(研磨圧力が歯面の表面粗さに与える影響)
外周刃ブレードによる切断加工のシミュレーション解析(切断面の条痕パターンに基づくブレード挙動の推定)
Approach for maximizing a production rate in a high quality and precision relay macuning-assembly production system
ブレードガイドによる外周刃ブレード刃先のアクティブ制御に関する基礎研究(第2報)
研磨加工を目的とした3次元工具振動システムの開発
電磁弁吸着面の磁気特性の評価
ブレードガイドによる外周刃ブレード刃先のアクティブ制御に関する基礎研究(第3報)
加工スケジューリングにおける能力調整に関する研究(納期遅れに対する残業設定法)
ソーワイヤの走行挙動に与えるガイドローラ溝半径の影響
電気化学的加工法の提案
電気防錆加工法の開発─加工機筐体の防錆─
金型生産システムにおける能力調整に関する研究(残業時間を用いた能力調整法)
マッチング法を適用した高精度組立生産システムに関する研究(修正組立法における測定誤差と修正加工誤差の考慮)
非導電性超砥粒研削ホイールの接触放電ツルーイングに関する研究
形彫り放電加工された工具鋼表面の3次元工具振動による研磨
マッチングを適用した高精度組立生産システムに関する研究(選択組立法における最適層別区分)
電気防錆加工法の開発─補助電極による防錆効率化─
電気化学的加工法の開発
マッチング法を適用した高精度組立生産システムに関する研究(修正組立法における最適修正機械選択法)
加工・組立生産システムにおける能力調整法に関する研究(金型生産における残業設定法)
納期遵守生産を目指した加工スケジューリングに関する研究(工程納期遅れに対する逐次事後残業設定法)
8の字形3次元振動を利用した小形金型の研磨に関する研究―螺旋溝を有する貫通穴内面の研磨-
外周刃ブレードのインプロセスたわみ測定に関する研究-大口径プラスチック光ファイバーを用いた測定方法の検討-
マイクロ金型の創成を目指す電気化学マイクロ加工システムの開発
電気防錆加工法の開発研究
電気防錆加工法─環境にやさしいゼロエミッション水加工法─
Development of a Three-Dimensional Tool Oscillation System for Finishing Metal Molds
Development of Electric Rust Preventive Machining Method for New Environmental Harmonic Machining Only Using Water
Lapping of EDM processed tool steel surfaces using three-dimentional figure-8 tool motion
N. NISHIKAWA, T. IYAMA, M. MIZUNO, H. MIFUNE
電気防錆加工法の研究開発─水循環システムの提案─
電気防錆加工法の開発─補助電極による最適防錆電流と電気特性の検証─
電気防錆加工法の開発研究─加工水循環のための切屑防錆─
環境と人に優しい電気防錆加工法の開発─ゼロエミッションを目指して─
電気防錆加工法の開発─補助電極による高効率防錆と最適防錆電流の検証─
電気防錆加工法の開発研究 加工水再生流量の増加について(速報)
人と環境に優しい機械加工法:電気防錆加工法システム,その環境性と汚染物除去能力
電気防錆加工法の応用研究-加工水からの混入物質の除去検討-
電気防錆加工法の研究開発-切りくず沈殿防錆システムの検証‐
電気防錆加工法の開発研究─各地の水による防錆への影響─
電気防錆加工法の開発研究-加工水循環再生システムの改良と評価‐

Research Grants & Projects

 
####Life Work
Investigator(s): NISHIKAWA Naohiro
Electric Rust Preventive Machining Method (Water Machining)
Electricity Rust Preventive Machining Method
####Grants‐in‐aid for Scientific Research (KAKENHI)
Investigator(s): NISHIKAWA Naohiro
####Other Research Funds
Investigator(s): Research Member (There is not the difference of the representative): NISHIKAWA Naohiro
####Other Research Funds: Contribution
Intelligent Cosmos Academic foundation: Grant in Aid of Intelligent Cosmos Academic foundation (Grant in Aid for Practical Research)
Investigator(s): NISHIKAWA Naohiro
Intelligent Cosmos Academic foundation: Grant in Aid of Intelligent Cosmos Academic foundation (General Grant in Aid)
Investigator(s): NISHIKAWA Naohiro
INS (Iwate Network System) Iwate Die and Mold Technology Research Group: Grant in Aid of INS (Iwate Network System) Iwate Die and Mold Technology Research Group (2008 fiscal year)
Investigator(s): NISHIKAWA Naohiro
####Industrial Collaborations:
(Concealing)
Company in Iwate Prefecture (Concealing): Cooperative Research
(Concealing)
Company in Iwate Prefecture (Concealing): Cooperative Research
Investigator(s): NISHIKAWA Naohiro
(Concealing)
Company in Iwate Prefecture (Concealing): Cooperative Research
Investigator(s): NISHIKAWA Naohiro
(Concealing)
Company in Iwate Prefecture (Concealing): Cooperative Research
Investigator(s): NISHIKAWA Naohiro

Patents

 
特開2004-017261 : 機械加工装置および機械加工方法ならびに機械加工システム
特開2004-323940 : 機械加工装置、被加工物搬送装置および機械加工システム
特許第5598841号 : 機械加工システム

Social Contribution

 
####NEWS(Newspaper)
[Others]  Watch at Japanese Page
####NEWS(Television)
[Others]  Watch at Japanese Page