藤原 正二

再溶解ばね鋼の凝固組織と機械的性質 

高知工業高等専門学校 (44) 17 1999年  

The solidification structure and Mechanical properties in remelted Spring steel 

BULLETIN OF KOCHI NATIONAL COLLEGE OF TECHNOLOGY (44) 17 1999年  

加熱したCu-Zr非晶質材の塑性変形挙動 

高知高専学術紀要 (39) 63 1995年  

The Behaviour of Plastic Deformation of The Heated Cu-Zr Amorphous Sheets 

BULLETIN OF KOCHI NATIONAL COLLEGE OF TECHNOLOGY (39) 63 1995年  

Cu-12%Al合金の塑性加工と組織 

高知高専学術紀要 37 91 1993年  

The structure and plasticity in a Cu-12% Al alloy 

The Bulletin of KOCHI NATIONAL COLLEGE of TECHNOLOGY 37 91 1993年  

Shape Memory Effect in Rapidly Quenched Cu-12%Al and Cu-12%Al-1%Si Alloys 

Proc. 6th Int. Conf. on Rapidly Quenched Metals 1987年  

Aging Behaviour of Rapidly Quenched INCONEL 713C Alloy Using Twin-roll Technique 

Proc. 5th Int. Conf. on Rapidly Quenched Metals 1984年  

The Tensile Properties of an Fe-4%Mo-0.2%C Martensite Tempered under Applied Stress 

Metallurgical Trans. A 14A 1982年  

Structures and Properties of Stainless Steel Sheets Directly Rolled from Molten State 

Proc. 4th Int. Conf. on Rapidly Quenched Metals 1981年  

Effect of Austenite Deformation on Temper Embrittlement of Quenched Ni-Cr Steel 

Proc. A Joint U. S. /Japan Seminar, MBMOAA, DPT 1979年  

α-γ2相混合組織をもつFe-Cr-Ni合金の時効挙動について 

日本金属学会誌 40(4) 1976年  

The Aging Behavior of an Fe-Cr-Ni Duplex Alloy of Ferrite and Austenite 

Journal of the Japan Institute of Metals 40(4) 1976年  

Precipitation Behavior in Fe-Mn-Cu Austenitic Alloys 

Trans. JIM 17 1976年  

Fe-Mo-Cマルテンサイトの焼もどし2次硬化におよぼすCo,Al,Mn添加の寄与 

日本金属学会誌 36(1) 1972年  

The Effect of Small Additions of Co, Al and Mn on the Secondary Hardening in Fe-Mo-C Martensite 

Journal of the Japan Institute of Metals 36(1) 1972年  

Multiple Precipitation in an Fe-Mo-Ni-Al-C Martensite 

Proc. ICSTIS, Trans. ISIJ 11 1971年  

Precipitation Behavior of Fe-Mo-Cu-C Martensite 

Supl. Trans. JIM 9 1968年