TERAI Hisanobu

J-GLOBAL         Last updated: Dec 5, 2018 at 15:19
 
Avatar
Name
TERAI Hisanobu
Affiliation
National Institute of Technology, Kitakyushu
Section
Dept. of Creative Engineering, Robotics and Mechatronics Course
Job title
Professor
Degree
Master of Engineering(Kyushu Institute of Technology), Doctor of Engineering(Kyushu Institute of Technology)

Research Areas

 
 

Academic & Professional Experience

 
Apr 2015
 - 
Today
Professor, Department of Creative Engineering, Robotics and Mechatronics Course, National Institute of Technology, Kitakyushu.
 
1984
 - 
1990
Resercher, Hiroshima R&D Center, Mitsubishi Heavy Industries.
 
1990
 - 
1995
Assistant Professor, Kitakyushu National College of Technplogy
 
1995
 - 
2005
Associate Professor, Kitakyushu National College of Technplogy
 
2005
   
 
- Professor, Kitakyushu National College of Technplogy
 
2006
 - 
2007
Visiting scholar, Massachusetts Institute of Technology, USA
 

Education

 
 
 - 
1984
Graduate School, Division of Engineering, Kyushu Institute of Technology
 
 
 - 
1982
Faculty of Engineering, Kyushu Institute of Technology
 

Published Papers

 
Proposition of a New Gear Cutting Method Using by the Taper Endmill
TERAI Hisanobu, Teruyuki ASAO and Ryoichi YAGAMI
Proceedings of the 17th International Conference on Precision Engineering      Nov 2018   [Refereed]
TERAI Hisanobu
Transactions of the JSME (in Japanese)   83(856)    Dec 2017   [Refereed]
The ball end mill is used as a tool for cutting the metal mold and some complicated shape lake a screw. The demand for the precise machining of the ball end milling is increasing. The ball end milling has the unavoidable problem of machining error...
Geometric Analysis of Machining Error with Tool Orientation in Ball End Milling
TERAI Hisanobu
Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century (LEM21)   A09   Nov 2017   [Refereed]
High precision ball-end milling based on a geometric analysis of the cutting mechanism
TERAI Hisanobu
Proceedings of 16th International Conference on Precision Engineerin      Nov 2016   [Refereed]
A proposition for high precision ball end milling using the geometric evaluation index
TERAI Hisanobu
The 11th Manufacturing & Machine Tool Conference      Oct 2016   [Refereed]
Hisanobu Terai, Teruyuki Asao, Ryoichi Yagami
Proceedings - ASPE 2014 Annual Meeting   578-581   Jan 2014
Hisanobu Terai, Teruyuki Asao, Ryoichi Yagami
Proceedings - ASPE 2013 Spring Topical Meeting MIT Laboratory for Manufacturing and Productivity Annual Summit: Precision Control for Advanced Manufacturing Systems   55 142-145   Sep 2013
Hisanobu Terai, Teruyuki Asao and Ryoichi Yagami
Proceedings of ASPE2013 Spring Topical Meeting   142-145   Apr 2013   [Refereed]
In this study a new method of gear cutting is proposed. This method is characterised by working out a variable module gear cutting using a one tool.The new method of gear cutting is presented. And it is confirmed the feasibility with the machining...
Research about elastic mechanism of error generation in ball end milling based in geometric analysis
TERAI Hisanobu
Proceedings of the 14th International ESAFORM Conference on Material Forming Esaform   573-578   Apr 2011   [Refereed]
Experimental Research into Elastic Deformation of Tool on Machining Accuracy in Ball End Milling
TERAI Hisanobu
Proceedimds of the 6th International Conference on MicroManufacturing ICOMM/2011   405-409   Mar 2011   [Refereed]
Experimental Research into Geometrical Influence of Tool Orientation on Machining Accuracy in Ball End Milling
TERAI Hisanobu
Proceedings of the 12th CIRP Conference on Modelling of Machining Operations   505-510   Nov 2009   [Refereed]
Simplified Estimation Method of Cutting Force Based on Geometric Prediction of Chip Flow Direction in Ball End Milling
TERAI Hisanobu
Proceedings of the 12th CIRP Conference on Modelling of Machining Operations   459-464   2009   [Refereed]
TERAI Hisanobu
Int. J. Machining and Machinability of Materials   6(1) 83-94   2009   [Refereed]
KUCHII Shigeru, SHIMAZU Masaki, YASUNOBU Tsuyoshi, TERAI Hisanobu
工学・工業教育研究講演会講演論文集   18(0) 390-391   Jul 2006   [Refereed]
TERAI Hisanobu, ASAO Teruyuki, KIKKAWA Koichi, MIZUGAKI Yoshio
Proceedings of International Conference on Leading Edge Manufacturing in 21st century : LEM21   2005(1) 151-156   Oct 2005   [Refereed]
This paper presents originally the experimental measurement method of the machining accuracy in the ball-nosed end milling. This method makes it possible to machine in every tool orientation with the three-axis-controlled machine tool. The machine...
TERAI Hisanobu, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
JSME international journal. Series C, Mechanical systems, machine elements and manufacturing   47(1) 2-7   Mar 2004   [Refereed]
This paper clarifies the analysis method for the undeformed chip thickness and the geometric influence of the tool orientation on the ball-nosed end milling. It has been firstly pointed out that the geometric situations on the determination of the...
TERAI Hisanobu, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
Transactions of the Japan Society of Mechanical Engineers. C   69(684) 2162-2167   Aug 2003
This paper clarifies the geometric generating mechanism of chip and machined surface in consideration of the tool orientation in ball-nosed end milling. Firstly the cutting cross section area A_g is proposed as the index of cutting state. lt is on...
KIKKAWA Koichi, MIZUGAKI Yoshio, HAO Minghui, TERAI Hisanobu
Journal of the Japan Society of Precision Engineering   69(3) 407-411   Mar 2003   [Refereed]
The objective of this study is to clarify the optimum direction of tool revolving axis where the machining error of the surface geometrically becomes the minimum in 5-axis machining. This paper describes the dependence which is derived from geomet...
TERAI Hisanobu, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
Transactions of the Japan Society of Mechanical Engineers. C   68(672) 2457-2463   Aug 2002
This paper presents a geometric analysis of an undeformed chip thickness at the top of tool in ball-nosed end milling. It has been firstly pointed out "backward cutting" near the center of tool that is irregular interference between the flank and ...
ASAO Teruyuki, MIZUGAKI Yoshio, TERAI Hisanobu, KIKKAWA Kouichi, OHKOMORI Yoshihiro
日本機械学会九州支部講演論文集   2002(55) 313-314   Mar 2002   [Refereed]
TANAKA Daigo, TERAI Hisanobu, MIZUGAKI Yoshio
日本機械学会九州支部講演論文集   2002(55) 311-312   Mar 2002   [Refereed]
KIKKAWA Koichi, KONO Yoichi, MIZUGAKI Yoshio, ASAO Teruyuski, TERAI Hisanobu, OHKOMORI Yoshihiro
日本機械学会九州支部講演論文集   2002(55) 309-310   Mar 2002   [Refereed]
TERAI Hisanobu, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
Transactions of the Japan Society of Mechanical Engineers. C   67(654) 553-558   Feb 2001   [Refereed]
This paper presents a new analytical method to estimate the thickness of an undeformed chip in ball-nosed end milling. It has been firstly pointed out that the geometric situations on the determination of the thickness are categorized in three cas...
HAO Minghui, TERAI Hisanobu, MIZUGAKI Yoshio
Journal of the Japan Society of Precision Engineering   66(7) 1150-1154   Jul 2000   [Refereed]
This paper presents an analytical simulation method to estimate a machine profile in spherical milling with a ball-nosed spiral cutting edge tool. The height of machined profile is regarded as the cross point of the moving cutting edge and a speci...
HAO Minghui, ASAO Teruyuki, TERAI Hisanobu, MIZUGAKI Yoshio
Journal of the Japan Society of Precision Engineering   65(10) 1476-1480   Oct 1999   [Refereed]
This paper clarifies the generating mechanism of machined surface by ball-nosed end milling through geometric analysis. The problem definition is to determine a height of cusp at a voluntary position in milling a spherical surface with a plane cut...
IKEZAKI Yatsuo, TERAI Hisanobu, ASAO Teruyuki, NAKAMURA Taira, TAKEUCHI Yoshimi, SAKAMOTO Masafumi
Bulletin of the Kyushu Institute of Technology. Science and technology   51(0) 33-40   Sep 1985   [Refereed]

Misc

 
Relationship of Tool Orientation and Machining Accuracy on Ball-nosed End Milling
Proceedings of The Third International Conference on Leading Edge Manufacturing in 21st Century(LEM21)   Vol.1, pp.151-156.    2005
Influence of Tool Orientation on the Machining Mechanism of Ball-nosed End Milling
Proceedings of the Twentieth Annual ASPE Meeting (CD-ROM)   Vol.37, pp.439-442.    2005
寺井久宣, 浅尾晃通, HAO M, 吉川浩一, 水垣善夫
精密工学会大会学術講演会講演論文集   2004 C51   Sep 2004
JSME International Journal, Series C   Vol.47, No.1, pp.2-7.    2004
寺井久宣, HAO M, 吉川浩一, 水垣善夫
精密工学会大会学術講演会講演論文集   2003 100   Sep 2003
TERAI HISANOBU, HAO M, KIKKAWA KOICHI, MIZUGAKI YOSHIO
日本機械学会論文集 C編   69(684) 2162-2167   Aug 2003
寺井 久宣, 浅尾 晃通, 水垣 善夫
北九州工業高等専門学校研究報告   0(36) 53-58   Jan 2003
Transactions of the Japan Society of Mechanical Engineers   69(684 2162-2167)    2003
寺井久宣, HAO M, 吉川浩一, 水垣善夫
型技術   17(13) 58-59   Dec 2002
TERAI Hisanobu, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
The ... Manufacturing & Machine Tool Conference   2002(4) 61-62   Nov 2002
This paper presents a new analytical method to estimate the thickness of an undeformed chip in ball-nosed end milling. It has been firstly pointed out that the geometric situations on the determination of the thick-ness are categorized in three ca...
TERAI HISANOBU, HAO M, KIKKAWA KOICHI, MIZUGAKI YOSHIO
日本機械学会生産加工・工作機械部門講演会講演論文集   4th 61-62   Nov 2002
福谷 理明, 大小森 義洋, 井上 紀明, 水垣 善夫, 寺井 久宣, 浅尾 晃通
精密工学会大会学術講演会講演論文集   2002(2)    Oct 2002
寺井 久宣, 〓 明暉, 吉川 浩一, 水垣 善夫
精密工学会大会学術講演会講演論文集   2002(2)    Oct 2002
Hisanobu TERAI, Minghui HAO, Koichi KIKKAWA, Yoshio MIZUGAKI
Transactions of the Japan Society of Machanical Engineers C   68(672) 2457-2463   2002
寺井 久宣, 浅尾 晃通, 〔カク〕 明輝
北九州工業高等専門学校研究報告   0(34) 61-66   Jan 2001
Hisanobu TERAI, Minghui HAO, Koichi KIKKAWA, Yoshio MIZUGAKI
Transactions of the Japan Society of Mechanical Engineers   67(654) 553-558   2001
Efforts, Problems and Solutions of a Half-year Insentive Course for Technical Subjects-Instance at the Department of C.I.S.E. in Kitakyushu National College of Technology
Japanese Colleges of Technology Education Journal   (24) 301-306   2001
Efforts, problems and solutions to relate teaching and practice to classes-Instance of digital integrated circuits technology education
Japanese Colleges of Technology Education Journal   (24) 307-312   2001
Study of Educational Improvement on Sensor Technology Engineering
Japanese Colleges of Technology Education Journal   (24) 313-318   2001
寺井 久宣, 水垣 善夫, 〔カク〕 明暉
北九州工業高等専門学校研究報告   87-92   Jan 1999
Journal of the Japan Society for Precision Engnieering   65(10) 1476-1480   1999
Tool Wear Distribution of Ball-nosed End Milling(jointly worked)
The 4th Japan-France /2nd Asia-Europe Congress on Mechatronics   2 737-742   1998
Real-Time Measurement of Milling Tool Behavior in Multi-Axis Machine Tool(jointly worked)
1998 JAPAN-U. S. A. SYMPOSIUM ON FLEXIBLE AUTOMATION   791-798   1998
Basic study on high-precision face milling (jointly worked)
THE 5TH SINO-JAPAN JOINT SEMINAR ON ULTRAPRECISION MACHINING   26   1994
Development of 5-axes controlled machining center
Mitsubishi Technical Review   27(2)    1990
High Efficiency Gear-Shaping by Controlling Radial Feed Rate
Mitsubishi Technical Review   25(2)    1988
Study on High Speed Gear-Shaping
Mitsubishi Technical Review   24(3)    1987
Effect of Tool Dynamics upon Tool Life(2nd Report)
Bulletin of Kyushu Institute of Technology   (51)    1985

Books etc

 
Introduction to Mechanical Engineering
Nikkan Kogyo Shinbun   2003   ISBN:ISBN4-526-05069-5

Conference Activities & Talks

 
浜松弘, 寺井久宣, 久池井茂, 日高康展, 島津公紀
電磁力関連のダイナミックスシンポジウム講演論文集   18 May 2010   
寺井久宣, 浅尾晃通, 吉川浩一, 水垣善夫
精密工学会九州支部地方講演会講演論文集   6 Dec 2008   
TERAI Hisanobu, ASAO Teruyuki, KIKKAWA Koichi, MIZUGAKI Yoshio
The ... Manufacturing & Machine Tool Conference   21 Nov 2008   
In order to level up the 3D complex shape machining for the metal mold and die, the machining simulation which can be considered the contact point or relative angle between the workpiece and machining tool is useful. In this study we has been deve...
TERAI HISANOBU, ASAO TERUYUKI, KIKKAWA KOICHI, MIZUGAKI YOSHIO
日本機械学会生産加工・工作機械部門講演会講演論文集   21 Nov 2008   
TERAI Hisanobu, ASAO Teruyuki, HAO Minghui, KIKKAWA Koichi, MIZUGAKI Yoshio
The ... Manufacturing & Machine Tool Conference   19 Nov 2004   
In order to level up the 3D complex shape machining for the metal mold and die, the machining simulation which can be considered the contact point or relative angle between the workpiece and machining tool is useful. In this study we has been deve...
TERAI HISANOBU, ASAO TERUYUKI, HAO M, KIKKAWA KOICHI, MIZUGAKI YOSHIO
日本機械学会生産加工・工作機械部門講演会講演論文集   19 Nov 2004   
寺井 久宣, 〓 明暉, 吉川 浩一, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Mar 2002   
金 徳垣, 吉川 浩一, 水垣 善夫, MINGHUI Hao, 寺井 久宣
精密工学会大会学術講演会講演論文集   1 Mar 2002   
寺井 久宣, 〓 明暉, 吉川 浩一, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Sep 2001   
福田 幸一, 〓 明暉, 寺井 久宣, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Sep 2001   
寺井 久宣, 〓 明暉, 吉川 浩一, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Sep 2000   
福田 幸一, 〓 明暉, 寺井 久宣, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Sep 2000   
寺井 久宣, 〓 明暉, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Mar 2000   
水垣 善夫, MINGHUI Hao, 浅尾 晃通, 寺井 久宣, 志満 学
精密工学会大会学術講演会講演論文集   1 Sep 1999   
水垣 善夫, MINGHUI Hao, 浅尾 晃通, 寺井 久宣, 佐伯 信行
精密工学会大会学術講演会講演論文集   1 Sep 1999   
寺井 久宣, 水垣 善夫, 〓 明暉, 浅尾 晃通
精密工学会大会学術講演会講演論文集   1 Sep 1999   
水垣 善夫, MINGHUI Hao, 浅尾 晃通, 寺井 久宣, 古川 功一, 遠山 浩一
精密工学会大会学術講演会講演論文集   5 Mar 1999   
志満 学, 浅尾 晃通, MINFHUI Hao, 水垣 善夫, 寺井 久宣
精密工学会大会学術講演会講演論文集   5 Mar 1999   
水垣 善夫, HAO Minghui, 浅尾 晃通, 寺井 久宣, 古川 功一
精密工学会大会学術講演会講演論文集   1 Sep 1998   
浅尾 晃通, 水垣 善夫, 坂本 正史, 寺井 久宣
精密工学会大会学術講演会講演論文集   1 Sep 1996   
寺井 久宣, 坂本 正史, 浅尾 晃通, 水垣 善夫
精密工学会大会学術講演会講演論文集   1 Sep 1996   

Research Grants & Projects

 
STUDY ON HIGH PRECISION MACHINING