AONO Yuuta

J-GLOBAL         Last updated: Sep 12, 2019 at 15:31
 
Avatar
Name
AONO Yuuta
E-mail
aonokurume-nct.ac.jp
Affiliation
Kurume National College of Technology
Section
Department of Mechanical Engineering
Job title
Research associate
Degree
Master(Kyushu University), Doctor(Engineering)(Kyushu University)

Research Interests

 
 

Research Areas

 
 

Academic & Professional Experience

 
Apr 2013
 - 
Today
Associate Professor, Department of Mechanical Engineering, Kurume National College of Technology
 
1994
   
 
- Research Associate, Faculty of Engineering, Kyushu University
 

Education

 
 
 - 
1994
Department of Manufacturing and Systems, Graduate School, Division of Engineering, Kyushu University
 
 
 - 
1992
Department of Manufacturing and Systems, Faculty of Engineering, Kyushu University
 

Published Papers

 
Robert T Rudolf, Florian Roscheck, Yuuta Aono, Torsten Faber
Key Engineering Materials   577-578 277-280   Sep 2013
Junji SAKAMOTO,Yoshimasa TAKAHASHI,Yuuta AONO,Hiroshi NOGUCHI
Journal of Testing and Evaluation   41(2)    Mar 2013   [Refereed]
Paper ID JTE20120176 : DOI: 10.1520/JTE20120176
Mode II Delamination Fatigue Crack Growth Characteristics of GFRP Laminates with Wasted GFRP Milled Chips Interleaf
YOKOGAWA Hideto, AONO Yuuta, NOGUCHI Hiroshi
15th European Conference on Composite Materials      Jun 2012
Yuuta AONO,Shota MURAE,Toshihiko KUBO
Proceedia Engineering   10 2080-2085   Jun 2011   [Refereed]
MATSUEDA Takahiro, AONO Yuta, NOGUCHI Hiroshi
2010 111-113   Oct 2010
The fatigue limit of blunt-notched specimen is decided of the crack initiation limit σ_<w1> However , the evaluation of σ_<w1> which is based on fatigue crack properties is not proposed. When there is an initial crack at notch root, the threshold ...
Journal of Japanese scientists   45(7) 360-365   Jul 2010
IKEMATSU Koji, KANG Min-woo, AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   75(752) 446-454   Apr 2009
Spinning process and pretension treatment are used for Al-Alloy composite tanks. The spinning process develops coarsened grains and the pretension treatment shears precipitation particles. These changes of material properties is considered to affe...
Proposal for Control Method for Residual Stresses in Alumina Spray Coating
Tooru ARAMAKI,Yuuta AONO,Hiroshi NOGUCHI,Shinya MIYAJI,Toshihiro TACHIKAWA,Arata TATSUMI,Takashi KAYAMOTO
International Journal of Fracture      2009   [Refereed]
MISHIMA Takuhiro, KANG Min-woo, AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   74(748) 1519-1527   Dec 2008
The fatigue crack growth property of prestrained carbon steels was investigated to predict the fatigue life of the structures and mechanical parts, the materials of which were prestrained by metal working such as machining, pressing, and forging. ...
ARAMAKI Tooru, AONO Yuuta, NOGUCHI Hiroshi, MIYAJI Shinya, TACHIKAWA Toshihiro, CHEN Xinwei, KAYAMOTO Takashi
Transactions of the Japan Society of Mechanical Engineers. A   74(741) 637-646   May 2008
In a spray process, it is comfirmed that a temperature of generation of residual stresses has to be clarified for mechanism in generation of residual stresses. But a mechanism of the temperature is largely-unexplored. Therefore, it's hard to say t...
SHIBATA Shunsaku, OHSHIMA Hideki, AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   74(740) 558-565   Apr 2008
In order to investigate fatigue characteristics of vulcanized natural rubber (NR), fatigue tests are carried out under various stress ratios R and variable loading. In this paper, fatigue crack propagation life is predicted depending on fatigue cr...
SHIBATA Shunsaku, OCHI Katsuhiko, OHSHIMA Hideki, AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   74(739) 450-458   Mar 2008
In order to investigate fatigue characteristics of vulcanized natural rubber, fatigue tests were carried out under various stress ratios R. It was considered that the fatigue cracks were initiated from defects in very early stage of total life. Th...
Minwoo KANG,Yuuta AONO,Hiroshi NOGUCHI
Journal of Solid Mechanics,Materials Engineering   2(1) 82-94   2008   [Refereed]
ARAMAKI Tooru, AONO Yuuta, NOGUCHI Hiroshi, MIYAJI Shinya, TACHIKAWA Toshihiro, CHEN Xinwei, KAYAMOTO Takashi
2007 179-180   Oct 2007
In a spray process, it is comfirmed that a temperature of residual stress'es generation has to be clarified for mechanism in generation of residual stress. But a mechanism of the temperature is largely-unexplored. And so in this report an estimati...
Kang Minwoo, Aono Yuuta, Noguchi Hiroshi
2007 445-446   Oct 2007
Effect of prestrain type (tensile and torsional prestrain) on the fatigue limit in carbon steel was investigated. 0.1% annealed, 0.5% annealed, and 0.5% quenched-tempered carbon steel specimens were monotonically loaded in tension or torsion to pr...
Minwoo KANG,Yuuta AONO,Hiroshi NOGUCHI
International Journal of Fatigue   29(9-11) 1855-1862   Sep 2007   [Refereed]
Fatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting (Characteristics of Composition,Mechanical Properties)
Hideki OSHIMA,Yuuta AONO,Hiroshi NOGUCHI,Shunsaku SHIBATA
Memoirs of the Faculty of Engineering, Kyushu University   67(2) 75-83   Jun 2007   [Refereed]
MATSUNO Hiroyuki, AOKI Yuta, HAGIHARA Akiyoshi, ODA Yasuji, NOGUCHI Hiroshi
2006(1) 641-642   Sep 2006
In order to investigate the effect of hydrogen on the fatigue strength and the crack propagation behavior of an austenitic stainless steel JIS SUS304, bending fatigue tests were carried out on specimens with small twin holes in a low pressure hydr...
MIYAZAKI Tatsujiro, NOGUCHI Hiroshi, MIYAHARA Hirofumi, AONO Yuta
Transactions of the Japan Society of Mechanical Engineers. A   72(720) 1185-1193   Aug 2006
In this paper, a quantitative prediction method for the gatigue limit reliability of a notched metal with different sorts of inhomogenities is proposed. The fatigue limit of the notched specimen cosists of the microcrack nonpropagation limit σ_<w1...
OCHI Katsuhiko, SHIBATA Shunsaku, AONO Yuuta, NOGUCHI Hiroshi, OHSHIMA Hideki, KURIYA Yoshinari
2006(59) 49-50   Mar 2006
OKUNAGA Tsuyoshi, AONO Yuuta, NOGUCHI Hiroshi, KURIYA Yoshinari
2006(59) 51-52   Mar 2006
IKEMATSU Koji, MISHIMA Takuhiro, KANG Min-Woo, AONO Yuuta, NOGUCHI Hiroshi, KURIYA Yoshinari
2006(59) 53-54   Mar 2006
MIYAZAKI Tatsujiro, NOGUCHI Hiroshi, OGI Keisaku, AONO Yuta
Transactions of the Japan Society of Mechanical Engineers. A   71(712) 1699-1707   Dec 2005
In this paper, a quantitative prediction method for the fatigue limit reliability of metal with different sorts of inhomogenities is proposed. The method is based on the stress-strength model which consists of "statistical characteristics of hardn...
MIYAZAKI Tatsujiro, NOGUCHI Hiroshi, AONO Yuuta
Proceedings of the ... annual meeting of JSME/MMD   2005 215-216   Nov 2005
In this paper, a quantitative prediction method for the fatigue limit reliability of metal with different sorts of inhomogenities is proposed. The method is based on the stress-strength model which consists of "statistical characteristics of hardn...
MISHIMA Takuhiro, IKEMATSU Kouji, AONO Yuuta, NOGUCHI Hiroshi
Proceedings of the ... annual meeting of JSME/MMD   2005 449-450   Nov 2005
AOKI Yuta, ODA Yausji, NOGUCHI Hiroshi
Proceedings of the ... annual meeting of JSME/MMD   2005 575-576   Nov 2005
Shibata Shunsaku, HIROTA Kazuya, AONO Yuuta, NOGUCHI Hiroshi, KUROIWA Takao, TAKITA Katsuhiko
Proceedings of the ... annual meeting of JSME/MMD   2005 621-622   Nov 2005
KANG Jin-shik, AONO Yuuta, NOGUCHI Hiroshi
2005(1) 153-154   Sep 2005
YOSHIDA Taro, KANG Jin-shik, NOGUCHI Hiroshi, AONO Yuuta
2005(58) 15-16   Mar 2005
HIROTA Kazuya, NOGUCHI Hiroshi, AONO Yuuta, LEE Seung-Hwan, KUROIWA Takao, TAKITA Katsuhiko
2005(58) 19-20   Mar 2005
MIYAZAKI Tatsujiro, OHAMA Shousuke, NOGUCHI Hiroshi, AONO Yuuta
Transactions of the Japan Society of Mechanical Engineers. A   71(702) 279-287   Feb 2005
In this paper, the practical method to estimate the stress concentration factor (SCF) of two dimensional surface complex roughness is proposed. In the present method, the surface roughness is approximated with an infinite row of colinear notches w...
Yuuta Aono,Hiroshi Noguchi
International Journal of Fracture   131(1) 59-78   Jan 2005   [Refereed]
MIYAZAKI Tatsujiro, NOGUCHI Hiroshi, AONO Yuta, KANG Jin-Shik
The Computational Mechanics Conference   2004(17) 849-850   Nov 2004
In this paper, the practical method to estimate the stress concentration factor (SCF) of two dimensional surface complex roughness is proposed. In the present method, the surface roughness is approximated with an infinite row of colinear notches w...
AONO Yuuta, NOGUCHI Hiroshi, LEE Seung-Hwan
Transactions of the Japan Society of Mechanical Engineers. A   70(698) 1384-1392   Oct 2004
The characteristics of the off-axis strength reliability of notched UD composites is discussed. Tensile tests are carried out on polished specimens with various shaped notches introduced by a drill and a saw. The notches are observed with plastic ...
Effect of Stress Ratio on Fatigue Strength of DBM Composites
Yuuta Aono,Hiroshi Noguchi,Seung-Hwan Lee,Takao Kuroiwa,Katsuhiko Takita
Third International Conference on Fatigue of Composites Book of Extended Abstract   27-28   Sep 2004   [Refereed]
Seung-Hwan Lee,Yuuta Aono,Hiroshi Noguchi,Seong-Kyun Cheong
Journal of Composite Materials   38(17) 1461-1477   Sep 2004   [Refereed]
LEE Seung-Hwan, AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   69(686) 1465-1472   Oct 2003
The residual strengths of hybrid composites with non-woven carbon tissue (NWCT) are investigated under in-plane compressive static and fatigue loading conditions after contact loading with a steel ball as the indentor. The hybrid composites are ma...
AONO Yuuta, LEE Seung Hwan, NOGUCHI Hiroshi, Cheong Seong Kyun
Proceedings of the ... annual meeting of JSME/MMD   2003 117-118   Sep 2003
AONO Yuuta, NOGUCHI Hiroshi, HIDAKA Hiroshi, HATTORI Takashi
Transactions of the Japan Society of Mechanical Engineers. A   69(684) 1186-1194   Aug 2003
In this paper, a method to predict the fatigue limit reliability of specimens with various surface roughness is proposed. First, the mechanical profile for fatigue limit is proposed. This is obtained from the ineffective crack length. Then the equ...
LEE Seung-Hwan, AONO Yuuta, NOGUCHI Hiroshi, CHEONG Seong-Kyun
2003 25-26   May 2003
Seung-Hwan Lee,Yuuta Aono,Hiroshi Noguchi
Journal of Composite Materials   37(4) 333-349   Apr 2003   [Refereed]
AONO Yuuta, NOGUCHI Hiroshi, HATTORI Takashi
Transactions of the Japan Society of Mechanical Engineers. A   69(678) 357-363   Feb 2003
The influence of surface roughness on fatigue limit is evaluated by a surface factor and a safe factor and they don't have the distinct physical meanings. To discuss a quantitative evaluation of surface roughness on fatigue limit reliability, the ...
LEE Seung-Hwan, NOGUCHI Hiroshi, AONO Yuuta
Transactions of the Japan Society of Mechanical Engineers. A   68(675) 1628-1635   Nov 2002
The objective of this investigation is to study the effect of non-woven carbon tissue (NWCT) in order to fundamentally understand the impact damage mechanism of hybrid composites with NWCT. Damage mechanism of of hybrid composites was investigated...
AONO Yuuta, LEE Seung Hwan, NOGUCHI Hiroshi
Proceedings of the ... annual meeting of JSME/MMD   2002 101-102   Oct 2002
MIYAZAKI Tatsujiro, NOGUCHI Hiroshi, AONO Yuta
2002(55) 17-18   Mar 2002
A quantitative prediction method for notch effect in fatigue limit reliability of high strength steels with defects or non-metallic inclusions is proposed with a stress concentration and scatter of Vickers hardness and defect size distribution. Es...
LEE Seung-Hwan, AONO Yuuta, KANG Jin-Shik, NOGUCHI Hiroshi, CHEONG Seong-Kyun
Proceedings of the ... annual meeting of JSME/MMD   2001 99-100   Jul 2001
Static FOD characteristics of hybrid composites with non-woven carbon tissue (NWCT) are investigated under contact loading condition with steel ball as the indentor. The hybrid composites are made by stacking NWCT- and CFRP-prepregs. Four kinds of...
AONO Yuuta, LEE Seung-Hwan, NOGUCHI Hiroshi
Proceedings of the ... annual meeting of JSME/MMD   2001 503-504   Jul 2001
The scatter of the strength of notched UD composites is discussed. Tensile tests have been carried out on four kinds of fiber angle and six kinds of notch shape, three specimens are prepared for each notch shape. The notches are observed with plas...
AONO Yuuta, NOGUCHI Hiroshi
Proceedings of the ... annual meeting of JSME/MMD   2000 677-678   Oct 2000
The stress concentration factor of cyclic notches is influenced by the notch root radius, the notch depth, the notch pitch and so on. Therefore, the concept of the equivalent ellipse is not directly applicable to cyclic notches. In this paper, the...
AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   66(644) 804-810   Apr 2000
The uni-directional FRP have very complex stress fields because of their anisotropy. Many researchers have reported the methods to calculate stress intensity factors or stress concentration factors. But only these parameters are not sufficient to ...
AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   66(644) 811-815   Apr 2000
The fracture criterion for notched uni-directional composites is discussed in this paper. The tensile tests of specimens are carried out with various fiber angles and various shaped notches. The fracture origins are carefully observed and the elas...
NOGUCHI Hiroshi, AONO Yuuta, HARADA Toyomitsu, SAIMOTO Akihide
Transactions of the Japan Society of Mechanical Engineers. A   64(623) 1773-1777   Jul 1998
A boundary integral method is newly applied to a plate structure, where the structure is divided to some plates and each plate is dealed with a thin plate under in-plane loading and bending loading. Although each plate is like a plate-bending elem...
AONO Yuuta, NOGUCHI Hiroshi
Transactions of the Japan Society of Mechanical Engineers. A   64(620) 964-968   Apr 1998
In this paper, a FEM analysis is developed on the basis of Ambartsumyan's plate theory. This method is simple and useful for calculating interlaminar shear stress in thin laminated plates, because Ambartsumyan's theory can consider the effect of t...
Noguchi Hiroshi, Aono Yu-uta
Transactions of the Japan Society of Mechanical Engineers. A   61(589) 2044-2051   Sep 1995
An application limit of linear notch mechanics in elastic-plastic solids is proposed, based on theoretical and FEM elastic-plastic analyses ; this limit corresponds to the condition of small-scale yielding in linear fracture mechanics. Moreover, t...

Misc

 
Meso-analysis for Fatigue Limit Reliability of Metal Specimen with Complex Surface
Proceeding of International Conference on New Challenges in Mesomechanics   419-424    2002
Fracture Criterion for Notched Uni-Directional CFRP
9th Cimtec-World Forum on New Materials SI Computational Modeling and Simulation of Materials   379   1999
Transactions of the Japan Society of Mechanical Engineers   61(589) 2044-2051   1995
Yuuta AONO, Hiroshi NOGUCHI
Transaction of the Japan Society of Mechanical Engineers   64(620) 964-968   1998
Hiroshi NOGUCHI, Yuuta AONO, Toyomitsu HARADA, Akihide SAIMOTO
Transactions of Japan Society of Mechanical Engineers   64(623) 1773-1777   1998
Yuuta Aono, Hiroshi Noguchi, Seung-Hwan Lee, Takao Kuroiwa, Katsuhiko Takita
International Journal of Fatigue      2006
Tatsujiro MIYAZAKI, Yuuta AONO, Hiroshi NOGUCHI
International Journal of Fracture   143(4) 355-367   2007
Fatigue Characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting (Characteristics of Composition and Mechanical Properties)
Hideki OSHIMA, Yuuta AONO, Hiroshi NOGUCHI, Shunsaku SHIBATA
Memoirs of the Faculty of Engineering, Kyushu University      2007
Takuhiro MISHIMA, Minwoo KANG, Yuuta AONO, Hiroshi NOGUCHI
International Journal of Fatigue      2007
Minwoo KANG, Yuuta AONO, Hiroshi NOGUCHI
International Journal of Fatigue      2007
Fatigue characteristics of Vulcanized Natural Rubber for Automotive Engine Mounting
Shunsaku SHIBATA, Katsuhiko OCHI, Yuuta AONO, Hiroshi NOGUCHI, Hideki OSHIMA
Key Engineering Materials      2007
Minwoo KANG, Yuuta AONO, Hiroshi NOGUCHI
Journal of Solid Mechanics and Materials Engineering   2(1) 82-94   2008
Minwoo KANG and Kentaro IRISA and Yuuta AONO and Hiroshi NOGUCHI
Journal of ASTM International      2008
Koji IKEMATSU and Takuhiro MISHIMA and Minwoo KANG and Yuuta AONO and Hiroshi NOGUCHI
Journal of ASTM International      2008
Yuuta AONO, Kazuya HIROTA, Seung-Hwan LEE, Takao KUROIWA, Katsuhiko TAKITA
International Journal of Fatigue   30(10-11) 1720-1728   2008

Research Grants & Projects

 
Static Strength of Unidirectional Composites
Project Year: 1993   
Elastic Analysis of Anisotropy
Project Year: 1992   
Fatigue of Fiber Reinforced Composites
Project Year: 2003