Yasuhiro Morizono

Profile Information

Affiliation: Professor, Department of Materials System Engineering, National Institute of Technology, Kurume College

Degree: Doctor of Engineering(Kumamoto University)
Master of Engineering(Kumamoto University)

J-GLOBAL ID: 200901018269910946
researchmap Member ID: 1000193293

Research Interests

Research Areas

Nanotechnology/Materials / Material fabrication and microstructure control /

Papers

Formation of intermetallic and its effect on the hardening of welding joint between vanadium alloy and Hastelloy X alloy after heat treatment

Shaoning Jiang, Jingjie Shen, Takuya Nagasaka, Takeo Muroga, Akio Sagara, Somei Ohnuki, Kazuyuki Hokamoto, Weifeng Rao, Shigeru Tanaka, Daisuke Inao …

Nuclear Materials and Energy, 34, Mar, 2023
Defect Formation in Aluminum-coated Steel by Heat Treatment

Yasuhiro Morizono, Takateru Yamamuro, Sadahiro Tsurekawa

Tetsu-to-Hagane, 109(1) 42-50, 2023
Novel Solid Carburizing Method for Steel Using a Mixture of Iron and Graphite Powders

Yasuhiro Morizono, Takateru Yamamuro, Sadahiro Tsurekawa

ISIJ International, 61(11) 2798-2804, Nov 15, 2021
Formation of nonequilibrium phases at collision interface in an explosively welded Ti/Ni clad

Minoru Nishida, Akira Chiba, Yasuhiro Morizono, Mitsuhiro Matsumoto, Takanobu Murakami, Akihisa Inoue

Materials Transactions, JIM, 36(11) 1338-1343, Nov, 2021
Effect of active metal on bonding characteristics and interfacial structure of the Si<inf>3</inf>N<inf>4</inf>/Si<inf>3</inf>N<inf>4</inf> joints brazed by Ag-Cu filler metal

Yasuhiro Morizono, Takashi Nakata, Minoru Nishida, Akira Chiba

Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi/Journal of the Ceramic Society of Japan, 103(1200) 810-815, Aug, 2021
Surface Modification of Molybdenum by Iron-Powder Pack Treatment

Yasuhiro Morizono, Takateru Yamamuro, Sadahiro Tsurekawa

Materials Transactions, 61(10) 2002-2007, Oct, 2020 Peer-reviewedLead author
Surface Modification of Ferritic Stainless Steel by Heating in Iron, Graphite and Alumina Powders

Yasuhiro Morizono, Takateru Yamamuro, Sadahiro Tsurekawa

ISIJ International, 60(9) 2044-2050, Sep, 2020 Peer-reviewedLead author
Interfacial Characterization of Dissimilar-Metals Bonding between Vanadium Alloy and Hastelloy X Alloy by Explosive Welding

Shaoning Jiang, Jingjie Shen, Takuya Nagasaka, Takeo Muroga, Akio Sagara, Somei Ohnuki, Kazuyuki Hokamoto, Shigeru Tanaka, Daisuke Inao, Yasuhiro Morizono …

Journal of Nuclear Materials, 539 152322, 2020 Peer-reviewed
Hot Shock Welding Applications for Layered Composite Consisting of Non-Oxide Ceramics and Metal

Ryuichi Tomoshige, Kanako Sonoda, Takumi Nakamura, Takuma Tanaka, Seiichiro Ii, Yasuhiro Morizono

Ceramics in Modern Technologies, 1 75-82, 2019 Peer-reviewed
Microstructural Changes in Low-carbon Steel Occurring by Heating in Mixtures of Iron, Graphite and Alumina Powders

Yasuhiro Morizono, Sadahiro Tsurekawa, Takateru Yamamuro

ISIJ International, 58(11) 2110-2116, Nov, 2018 Peer-reviewedLead author
Quantitative evaluation of microstructure in Mo-Si-B-TiC alloy produced by melting and tilt casting methods

Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, Kyosuke Yoshimi

Materials Transactions, 59(1) 136-145, 2018 Peer-reviewed
A Novel Surface Modification Technique Using Iron Powder

Yasuhiro Morizono, Sadahiro Tsurekawa, Takateru Yamamuro

Journal of the Technical Association of Refractories, Japan, 37(4) 193-197, Dec, 2017 Lead author
Effect of Heating Conditions on Surface Modification of Titanium with a Mixture of Iron, Graphite and Alumina Powders

Yasuhiro Morizono, Sadahiro Tsurekawa, Takateru Yamamuro, Sohshi Yoshida, Yuka Kawano

Materials Transactions, 58(4) 600-605, 2017 Peer-reviewedLead author
Quantitative Evaluation of Microstructure in Mo-Si-B-TiC Alloy Produced by Melting and Tilt Casting Method

Sojiro Uemura, Takateru Yamamuro, Joung Wook Kim, Yasuhiro Morizono, Sadahiro Tsurekawa, Kyosuke Yoshimi

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 80(8) 529-538, 2016 Peer-reviewed
Reduction and carbonitriding of anodic titanium oxide film by using a mixture of iron and carbon powders

Mitsutaka Yoshimoto, Shinzi Agawa, Yasuhiro Morizono, Sadahiro Tsurekawa

Journal of the Ceramic Society of Japan, 123(9) 903-907, Sep, 2015 Peer-reviewed
Grain Boundary Engineering of 10% Cr Ferritic-Martensitic Steel SUH3

Kyosuke Hirayama, Yonosuke Yoshi, Yasuhiro Morizono, Sadahiro Tsurekawa, Yasuyosi Hidaka

ISIJ International, 55(9) 1973-1979, 2015 Peer-reviewed
Aluminizing of High-carbon Steel by Explosive Welding and Subsequent Heat Treatment

Yasuhiro Morizono, Takuya Yamaguchi, Sadahiro Tsurekawa

ISIJ International, 55(1) 272-277, 2015 Peer-reviewedLead author
A Novel Surface Modification Technique Using Iron Powder

66(11) 542-546, Nov, 2014 Lead author
Underwater explosive welding of tungsten to reduced-activation ferritic steel F82H

Daichi Mori, Ryuta Kasada, Satoshi Konishi, Yasuhiro Morizono, Kazuyuki Hokamoto

Fusion Engineering and Design, 89 1086-1090, Oct, 2014 Peer-reviewed
Bonding and Separation between Ti-15 mol% Sn Alloy and Iron Materials

Yasuhiro Morizono, Seiichiro Nakatsukasa

ISIJ International, 54(6) 1368-1373, Jun, 2014 Peer-reviewedLead author
Surface Hardening of Titanium by Using a Simplified Carbon and Nitrogen Diffusion Technique with Steel and Carbon Powders

Yasuhiro Morizono, Yuka Kawano, Sadahiro Tsurekawa, Takateru Yamamuro

Materials Transactions, 54(8) 1454-1459, Aug, 2013 Peer-reviewedLead author
Enhancement of ductility in B2-type Zr-Co-Ni alloys with deformation-induced martensite and microcrack formation

M. Matsuda, Y. Iwamoto, Y. Morizono, S. Tsurekawa, K. Takashima, M. Nishida

Intermetallics, 36 45-50, Feb 18, 2013 Peer-reviewed
Differential Scanning Calorimetry of the alpha/gamma Transformation in Fe-Co Alloys under a Magnetic Field

Wataru Maruno, Yasuhiro Morizono, Sadahiro Tsurekawa

Materials Transactions, 54(9) 1823-1828, 2013 Peer-reviewed
Simplified Carburizing Process for Stainless Steel

Yasuhiro Morizono, Sadahiro Tsurekawa, Takateru Yamamuro

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 98(9) 18-23, Sep, 2012 Peer-reviewedLead author
Anodizing of aluminum in sulfuric acid and oxalic acid solutions with percarboxylic acid-based additive

Mitsutaka Yoshimoto, Yasuhiro Morizono, Sadahiro Tsurekawa, Tomoyuki Baba

Journal of the Ceramic Society of Japan, 120(7) 276-279, Jul, 2012 Peer-reviewed
Solid- and liquid-solid reactions in aluminum-coated titanium substrate fabricated by using explosive energy

Yasuhiro Morizono, Tomofumi Fukuyama, Tomofumi Fukuyama, Mitsuhiro Matsuda, Sadahiro Tsurekawa

Materials Transactions, 52(12) 2178-2183, Dec, 2011 Peer-reviewedLead author
Changes in ferroelectric domain structure with electric fatigue in Li 0.06(Na0.5K0.5)0.94NbO3 ceramics

Sadahiro Tsurekawa, Hiroki Hatao, Hirofumi Takahashi, Yasuhiro Morizono

Japanese Journal of Applied Physics, 50, Sep 1, 2011 Peer-reviewed
Interfacial microstructures and bonding strength between Bi-rich Bi-Sn alloys and copper

Copper and copper alloy, 50(1) 253-258, Aug, 2011 Peer-reviewed
Enhancement of ductility in B2-type Zr-Co-Pd alloys with martensitic transformation

M. Matsuda, T. Nishimoto, Y. Morizono, S. Tsurekawa, M. Nishida

INTERMETALLICS, 19(7) 894-899, Jul, 2011
Deformation structure in ductile B2-type Zr-Co-Ni alloys with martensitic transformation

Mitsuhiro Matsuda, Takahiro Nishimoto, Kyohei Matsunaga, Yasuhiro Morizono, Sadahiro Tsurekawa, Minoru Nishida

JOURNAL OF MATERIALS SCIENCE, 46(12) 4221-4227, Jun, 2011
In-situ scanning electron microscopy/electron backscattered diffraction observation of microstructural evolution during α → γ phase transformation in deformed Fe-Ni alloy

Tatsuya Fukino, Sadahiro Tsurekawa, Yasuhiro Morizono

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 587-593, Mar 1, 2011 Peer-reviewed
Interfacial microstructures and bonding strength between aluminum nitride and silver brazing filler metals containing various active elements

Y Morizono, M Nishida, A Chiba, T Nakata

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 112(1306) 305-310, Jun, 2004 Peer-reviewed
Diffusion Bonding of TiAl Alloy to Eutectoid Steel and its Interfacial Self-destruction Behavior

MORIZONO Yasuhiro, NISHIDA Minoru, CHIBA Akira, YAMAMURO Takateru, KANAMORI Yusuke, TERAI Takanobu

MATERIALS TRANSACTIONS, 45(2) 527-531, Feb 20, 2004
Underwater-shock compaction of Mo/Cu functionally graded powders

A Chiba, M Nishida, Y Morizono, K Imamura

FUNDAMENTAL ISSUES AND APPLICATIONS OF SHOCK-WAVE AND HIGH-STRAIN-RATE PHENOMENA, PROCEEDINGS, 275-282, 2001 Peer-reviewed
Effect of thermal cycling and aging on microstructure in near-equiatomic Ti-Pd alloys

S Ii, N Matsuzaki, Y Morizono, M Nishida

SHAPE MEMORY MATERIALS, 327-3 167-170, 2000 Peer-reviewed
Effect of Heat Treatment on Bonding Characteristics and InterfacialMicrostructures in Explosively Welded Ti/SUS430 Stainless SteelClad

Morizono Yasuhiro, Nishida Minoru, Chiba Akirakoutakashi, Imamura Kihachirou

Tetsu- to- Hagane, 85(4) 340-345, Apr, 1999
Shock induced transformation in rapidly solidified Ti-rich TiAl powders

M Nishida, Y Morizono, T Matsuda, A Chiba

JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2, 345-348, 1999 Peer-reviewed
Diffusion Barrier Effect of TiC Layer Formed at the Bonding Interface and Bonding Characteristics of an Explosively Welded Ti/SUS420J1 Stainless Steel Clad by Heat Treatment

CHIBA Akira, NISHIDA Minoru, MORIZONO Yasuhiro, IMAMURA Kihatirou

Tetsu- to- Hagane, 83(11) 736-741, Nov 1, 1997
Diffusion barrier effect of carbide layer on bonding characteristics of Ti/steel clad

Y Morizono, M Nishida, A Chiba

INTERFACIAL ENGINEERING FOR OPTIMIZED PROPERTIES, 458 363-368, 1997 Peer-reviewed
Fabrication of ZrO2/Ni and ZrO2/Al2O3 functionally graded materials by explosive powder consolidation technique

A Chiba, M Nishida, K Imamura, H Ogura, Y Morizono

FUNCTIONALLY GRADED MATERIALS 1996, 191-195, 1997 Peer-reviewed

Misc.

TEM-EELS法を用いたFeCo合金の粒界局所磁気モーメント評価

河口寿, 平山恭介, 連川貞弘, 森園靖浩

日本金属学会講演概要(CD-ROM), 156th, 2015
TEM-EELS法を用いたコバルト粒界の局所磁気モーメント評価

河口寿, 平山恭介, 森園靖浩, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部合同学術講演大会講演概要集, 2014, 2014
Transmission electron microscopy of antiphase boundary-like structure of B19′ martensite in Ti-Ni shape memory alloy

M. Matsuda, K. Kuramoto, Y. Morizono, S. Tsurekawa, E. Okunishi, T. Hara, M. Nishida

Acta Materialia, 59(1) 133-140, Jan 1, 2011
Ti基形状記憶合金マルテンサイト相における逆位相境界状組織の形態と結晶学

松田光弘, 山下雅史, 藏本和彦, 平山恭介, 森園靖浩, 連川貞弘, 原徹, 西田稔

日本金属学会講演概要, 146th, 2010
Bonding and Separation Behaviors between Ti-Sn Alloys and High Carbon Steel

Yasuhiro Morizono, Seiichiro Nakatsukasa, Minoru Nishida

THERMEC 2009, PTS 1-4, 638-642 3787-+, 2010
Influence of Heating Temperature on Interface Separation Behavior between Ti-20 mol% Al Alloy and High Carbon Steel

Yasuhiro Morizono, Yoshikazu Kodama, Takateru Yamamuro, Minoru Nishida

MATERIALS TRANSACTIONS, 50(8) 2005-2010, Aug, 2009
Effect of aging treatment on explosive welding process of beryllium copper to steel

MORIZONO Yasuhiro, HIROKAWA Yusuke, NISHIDA Minoru

Science and technology of energetic materials, 70(1) 43-48, Apr 30, 2009
Ti-Ni-Cu合金マルテンサイト相における逆位相境界状組織の透過電子顕微鏡観察

平山恭介, 松田光弘, 森園靖浩, 連川貞弘, 原徹, 西田稔

日本金属学会講演概要, 145th, 2009
Interface separation phenomenon in Ti-20mol%Al alloy/iron material joints

Yasuhiro Morizono, Yoshikazu Kodama, Takateru Yamamuro, Minoru Nishida

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 94(7) 251-257, 2008
Interfacial reaction between Ti-Al binary alloys and high carbon steel

Yasuhiro Morizono, Takateru Yamamuro, Minoru Nishida

MATERIALS TRANSACTIONS, 48(6) 1476-1482, Jun, 2007
Surface modification technique using interfacial reaction between Ti-Al alloy and steel

Yasuhiro Morizono, Minoru Nishida, Yoshikazu Kodama, Takateru Yamamuro, Yasuhide Ohno

THERMEC 2006, PTS 1-5, 539-543(PART 2) 1248-+, 2007
Effect of heat treatment atmosphere on the multistage martensitic transformation in aged Ni-rich Ti-Ni alloys

K. Fujishima, M. Nishida, Y. Morizono, K. Yamaguchi, K. Ishiuchi, T. Yamamuro

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 438(SPEC. ISS.) 489-494, Dec, 2006
Martensitic transformation and phase equilibrium in near equiatomic Zr-Pd alloys

T. Nishiura, T. Yamamuro, D. Hashimoto, Y. Morizono, M. Nishida

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 438(SPEC. ISS.) 852-856, Dec, 2006
爆発圧着したベリリウム銅/ステンレス鋼接合体の界面組織と接合特性に及ぼす時効の影響

森園靖浩, 西田稔, 山室賢輝

銅と銅合金, 45(1) 232-236, 2006
Effect of heat treatment conditions on multistage martensitic transformation in aged Ni-rich Ti-Ni alloys

Minoru Nishida, Toru Hara, Yasuhiro Morizono, Mitsuhiro Matsuda, Kousuke Fujishima

Materials Research Society Symposium Proceedings, 842 365-370, Aug 25, 2005
Diffusion of carbon and titanium in gamma-iron in a magnetic field and a magnetic field gradient

S Nakamichi, S Tsurekawa, Y Morizono, T Watanabe, M Nishida, A Chiba

JOURNAL OF MATERIALS SCIENCE, 40(12) 3191-3198, Jun, 2005
Solid State Bonding of Oxide Dispersion Strengthened Silver to Copper

MORIZONO Yasuhiro, MUTO Masayuki, NISHIDA Minoru, ASADA Takao, YAMAMURO Takateru, CHIBA Akira

quarterly journal of the Japan Welding Society, 23(2) 296-301, May 5, 2005
Effect of heat treatment conditions on multistage R and martensitic transformations in aged Ni-rich Ti-Ni alloys

Minoru Nishida, Yasuhiro Morizono, Kousuke Fujishima, Kentarou Ishiuchi

SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIAL 2005, VOL 2, 2 139-144, 2005
Application of the CSL model to deformation twin boundary in B2 type TiNi compound

M Nishida, M Matsuda, Y Morizono, T Fujimoto, H Nakashima

INTEGRATIVE AND INTERDISCIPLINARY ASPECTS OF INTERMETALLICS, 842 371-376, 2005
Interfacial microstructures and bonding strength between aluminum nitride and silver brazing filler metals containing various active elements

Yasuhiro Morizono, Minoru Nishida, Akira Chiba, Takashi Nakata

Journal of the Ceramic Society of Japan, 112(1306) 305-310, 2004
Microstructure of bonding interface in explosively-welded clads and bonding mechanism

A Chiba, M Nishida, Y Morizono

EXPLOSION, SHOCK WAVE AND HYPERVELOCITY PHENOMENA IN MATERIALS, 465-466 465-473, 2004
Superplasticity-like behavior of rapidly solidified Ti-rich TiAl powders and its application to in-situ sintering bonding

Yasuhiro Morizono, Ryohei Kumagae, Minoru Nishida, Yoshiyuki Mizuta, Akira Chiba

Materials Transactions, 44(4) 754-758, 2003
Electron microscopy study of microstructure modifications in RS P/M Mg97Zn1Y2 alloy

M Nishida, T Yamamuro, M Nagano, Y Morizono, Y Kawamura

MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 419-4(II) 715-720, 2003
Interfacial Microstructure and Bonding Strength of Ti - Al Alloy/Steel Joints.

MORIZONO Yasuhiro

14(3) 545-545, Mar 1, 2001
New precipitate phase in Pd and Ni rich Ti-Pd-Ni shape memory alloys

Y Shirakawa, Y Morizono, M Nishida

SHAPE MEMORY MATERIALS, 327-3 171-174, 2000
Transmission electron microscopy of twins in martensite in Ti-Pd shape memory alloy

M. Nishida, T. Hara, Y. Morizono, A. Ikeya, H. Kijima, A. Chiba

Acta Materialia, 45(11) 4847-4853, 1997
Microstructure dependence of compactibility of rapidly solidified Ti-rich TiAl alloy powders produced by plasma rotating electrode process

Minoru Nishida, Yasuhiro Morizono, Tomoaki Kai, Jim Sugimoto, Akira Chiba, Ryohei Kumagae

Materials Transactions, JIM, 38(4) 334-343, 1997
Phase transformations and crystallography of twins in martensite in Ti-Pd alloys

M Nishida, Y Morizono, H Kijima, A Ikeya, H Iwashita, K Hiraga

MATERIALS FOR SMART SYSTEMS II, 459 375-380, 1997
Diffusion barrier effect of carbide layer on bonding characteristics of Ti/steel clad

Y. Morizono, M. Nishida, A. Chiba

Materials Research Society Symposium - Proceedings, 458 363-368, Jan 1, 1997
Effect of initial microstructure on the compactibility of rapidly solidified Ti-rich TiAl powder

M. Nishida, A. Chiba, Y. Morizono, T. Kai, J. Sugimoto

Materials Research Society Symposium - Proceedings, 460 45-50, Jan 1, 1997
Grain refining and superplastic compaction of rapidly solidified TiAl powder with phase separation of nonequilibrium alpha(2) martensite

M Nishida, Y Morizono, T Kai, J Sugimoto, A Chiba

TOWARDS INNOVATION IN SUPERPLASTICITY I, 233-2 303-310, 1997
Effect of initial microstructure on the compactibility of rapidly solidified Ti-rich TiAl powder

M Nishida, A Chiba, Y Morizono, T Kai, J Sugimoto

HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VII, 460 45-50, 1997
Bonding characteristics and diffusion barrier effect of the TIC phase formed at the bonding interface in an explosively welded titanium high-carbon steel clad

A Chiba, M Nishida, Y Morizono, K Imamura

JOURNAL OF PHASE EQUILIBRIA, 16(5) 411-415, Oct, 1995
STRESS RELAXATION IN CERAMICS/METAL JOINT USING THERMOELASTIC MARTENSITIC TRANSFORMATION

Y MORIZONO, M NISHIDA, A CHIBA

PROCEEDINGS OF AN INTERNATIONAL CONFERENCE ON SOLID - SOLID PHASE TRANSFORMATIONS, 841-846, 1994
JOINING OF SI3N4 TO CARBON STEEL USING TI-PD BASE HIGH TEMPERATURE SHAPE MEMORY ALLOYS

Y MORIZONO, M NISHIDA, A CHIBA

ADVANCED MATERIALS '93, III - A & B, 16(A & B) 1151-1154, 1994
Joining of chromized carbon-steel and Si3N4

Yasuhiro Morizono, Minoru Nishida, Akira Chiba

Journal of the Ceramic Society of Japan. International ed., 101(12) 1327-1332, Dec 1, 1993
Joinning of Chromized Carbon-Steal and Si3N4

MORIZONO Yasuhiro, NISHIDA Minoru, CHIBA Akira

Journal of The Ceramics Society of Japan, 101(12) 1363-1368, 1993

Presentations

各種鉄粉を混合したグラファイト粉による純鉄の浸炭

松田和己, 森園靖浩, 連川貞弘, 山室賢輝

日本金属学会2021年（第168回）春期講演大会, Mar 17, 2021
大気中で加熱した浸炭用鉄・グラファイト・アルミナ混合粉の質量変化

松永啓吾, 森園靖浩, 連川貞弘, 山室賢輝

日本金属学会2021年（第168回）春期講演大会, Mar 17, 2021
鉄粉浸炭プロセスにおける鉄粉フリー領域の導入効果

豊福朋也, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会2020年（第166回）春期講演大会, Mar 19, 2020
鉄・グラファイト混合粉中で加熱した酸化鉄の微細組織変化

松尾誠也, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会2020年（第166回）春期講演大会, Mar 19, 2020
鉄粉浸炭した純鉄の微細組織に及ぼす加熱雰囲気の影響

大久保昇輝, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会2019年（第165回）秋期講演大会, Sep 12, 2019
鋼の浸炭技術の新展開－鉄・炭素混合粉が発揮する不思議な力－

森園靖浩, 連川貞弘, 山室賢輝

イノベーションジャパン2019
鉄・グラファイト混合粉を利用した酸化鉄の還元

松尾誠也, 田上雅大, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催令和元年度合同学術講演大会, Jun 1, 2019
大気中で加熱した鉄・グラファイト・アルミナ混合粉の質量変化

松永啓吾, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催令和元年度合同学術講演大会, Jun 1, 2019
鉄粉浸炭法における鉄粉フリー領域の導入効果

豊福朋也, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催令和元年度合同学術講演大会, Jun 1, 2019
鉄粉浸炭したモリブデン表面の微細組織

平間慧, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会2019年（第164回）春期講演大会, Mar 21, 2019
A novel solid carburizing using mixtures of iron and graphite powders

S. Okubo, S. Tsurekawa, T. Yamamuro, Y. Morizono

The 13th ICAST 2018 Manila, Nov 29, 2018
鉄粉浸炭した低炭素鋼におけるパーライト形成

森園靖浩, 山崎翼, 山室賢輝, 連川貞弘

日本鉄鋼協会第176回秋季講演大会, Sep 19, 2018
鉄・炭素混合粉末中で加熱したモリブデン表面における炭化物形成

平間慧, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催平成30年度合同学術講演大会, Jun 23, 2018
炭素や窒素を拡散浸透させたSUS304鋼の微細組織

前田大樹, 森園靖浩, 連川貞弘, 山室賢輝

日本鉄鋼協会第175回春季講演大会, Mar 21, 2018
鉄・グラファイト混合粉末中で加熱した純鉄に生じる浸炭組織の定量評価

大久保昇輝, 森園靖浩, 連川貞弘, 山室賢輝

日本鉄鋼協会第175回春季講演大会, Mar 21, 2018
鉄・グラファイト混合粉末を使った新しい固体浸炭法

安井晶俊, 森園靖浩, 連川貞弘, 山室賢輝

日本鉄鋼協会第175回春季講演大会, Mar 21, 2018
鉄・グラファイト・アルミナ混合粉末を利用したチタンの表面硬化

永岡佑脩, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会2018年（第162回）春期講演大会, Mar 21, 2018
硬質クロムめっき皮膜に対する簡易炭窒化処理

森園靖浩, 山東知陽, 連川貞弘

日本金属学会2018年（第162回）春期講演大会, Mar 19, 2018
鉄－炭素2元系の新たなる活用法

森園靖浩

久留米工業大学FD講演会, Mar 7, 2018
Microstructural changes of titanium heated with a mixture of iron, graphite and alumina powders in the air

Y. Nagaoka, S. Tsurekawa, T. Yamamuro, Y. Morizono

The 12th ICAST 2017 Kaohsiung, Nov 23, 2017
鋼の浸炭技術の新展開－家庭でもできる!?新たな浸炭法の開発－

森園靖浩

M&M（Materials and Mechanics）研究会講演会, Jul 21, 2017
鉄・炭素混合粉末を炭素源とした鋼の簡易浸炭法

安井晶俊, 森園靖浩, 連川貞弘

溶接学会九州支部研究発表会, Jun 22, 2017
鉄・炭素混合粉末を用いた鋼の浸炭現象とその定量評価

大久保昇輝, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催平成29年度合同学術講演大会, Jun 10, 2017
鉄・炭素混合粉末下で加熱したチタン中で起こる浸炭現象

永岡佑脩, 森園靖浩, 山室賢輝, 連川貞弘

日本金属学会九州支部・日本鉄鋼協会九州支部・軽金属学会九州支部共催平成29年度合同学術講演大会, Jun 10, 2017

Professional Memberships

Research Projects

二酸化炭素の発生を抑えた鋼の新規浸炭法の提案と応用

科学研究費助成事業, 基盤研究(C), 日本学術振興会, Apr, 2022 - Mar, 2025

森園靖浩
Novel Carburization Phenomenon for Steel and its Practical Use

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, Apr, 2019 - Mar, 2022

MORIZONO Yasuhiro
Development of Novel Thermal Reduction and Carbonitriding Processes for Titanium and Its Oxide

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, Apr, 2015 - Mar, 2018

MORIZONO Yasuhiro
New challenge of grain boundary engineering for development of ferritic/martensitic heat-resistant steels with superior environmental durability

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (A), Japan Society for the Promotion of Science, Apr, 2012 - Mar, 2016

Tsurekawa Sadahiro, WATANABE Seiichi, SIBAYAMA Tamaki, MORIZONO Yasuhiro, YAMAMURO Takateru
Development of a New Surface Modification Technique for Improving High-temperature Corrosion Resistance of Refractory Metals

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, Apr, 2012 - Mar, 2015

MORIZONO Yasuhiro
Transfer coating technique of metal foil using explosive energy and its application to industrial materials

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (C), Japan Society for the Promotion of Science, 2009 - 2011

MORIZONO Yasuhiro
Innovation in Electromagnetic Science of Materials and Its Application to Practical Materials Processing

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (S), Japan Society for the Promotion of Science, 2007 - 2011

TSUREKAWA Sadahiro, KOKAWA Hiroyuki, NISHIDA Minoru, II Seiichiro, MORIZONO Yasuhiro, MASTUZAKI Takashi, V. A. Yardley, PAVEL Lejcek, MOJMIR Sob, CHANGSHU He, NISHIDA Seiki, YAMAMURO Takateru
DEVELOPMENT OF SHAPE MEMORYALLOYS WITH SPECFIC PROPERTIES

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, 2005 - 2007

NISHIDA Minoru, YAMAUCHI Kiyoshi, MORIZONO Yasuhiro, MATSUDA Mitsuhiro
低温処理で生成可能な超伝導A15型化合物の探索

科学研究費助成事業, 萌芽研究, 日本学術振興会, 2004 - 2005

西田稔, 加賀山朋子, 森園靖浩, 松田光弘
衝撃超高圧を利用したアルミナイド被覆鋼板の簡易製造技術の確立

科学研究費助成事業, 若手研究(B), 日本学術振興会, 2002 - 2003

森園靖浩
水中衝撃波粉末固化法による多孔性チタン合金と金属材料との生体用複合材料の創製

科学研究費助成事業, 萌芽的研究, 日本学術振興会, 1996 - 1996

千葉晶, 森園靖浩, 西田稔
Development of high functional materials with nanoscale structure by combined process of MA treatment and powder consolidation with underwater shock wave

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, 1996 - 1996

CHIBA Akira, HOKAMOTO Kazuyuki, NISHIDA Minoru

Industrial Property Rights

特許6321982 金属材料の表面処理方法

森園靖浩, 連川貞弘, 松田尚久, 大西昌澄
特許6082935 導電性材料の製造方法

森園靖浩, 連川貞弘, 吉本光宇
特許5927646 金属の表面処理法

森園靖浩, 連川貞弘, 迫達也, 根本洋之, 河野友香
特開2017-053012 金属材料の表面処理方法

森園靖浩, 連川貞弘, 岩田大輝
特開2004-083939 チタン材料表面の炭化方法

森園靖浩, 西田稔, 千葉昂, 山室賢輝

Profile Information

Research Interests

Research Areas

Papers

Misc.

Presentations

Professional Memberships

Research Projects

Industrial Property Rights

Menu

Coauthors