Some models have already been developed to explain the effect of moisture content on the radon emanation fraction of soil. For this purpose, "microscopic" soil models, which are easy to deal with mathematically but cannot take grain size into consideration, have been designed. These previous models consist basically of two opposite grain surfaces and pores between the grains. In the present study, in order to study the effect of not only moisture content but also grain size, we present a simple modeling approach based on two "macroscopic" soil models: (1) a single-grain model and (2) a multiple-grain model. The latter model represents a configuration of spherical grains packed in a simple cubic structure. Based on these soil models and general assumptions, the radon emanation fraction was calculated as a function of grain size or moisture content by Monte Carlo simulation. The results for the multiple-grain model show that the radon emanation fraction is markedly increased with grain sizes ranging from 10 to 100 inn and reaches a constant value of 50% when moisture content is 0% and the radium is uniformly distributed on the grain surface. Moreover, a drastic increase is seen at smaller grain sizes with increasing moisture content. From these results, we concluded that the calculation of radon emanation depends greatly on the pore size between a Ra-bearing grain and a neighboring grain. The validity of the model was also evaluated by comparison to experimental data. (C) 2010 Elsevier Ltd. All rights reserved.