KAWADA, Hiroyuki

J-GLOBAL         Last updated: Mar 29, 2019 at 02:40
 
Avatar
Name
KAWADA, Hiroyuki
E-mail
kawadawaseda.jp
URL
http://www.kawada.mech.waseda.ac.jp/
Affiliation
Waseda University
Section
Faculty of Science and Engineering School of Fundamental Science and Engineering
Job title
Professor
Research funding number
20177702

Research Areas

 
 

Education

 
 
 - 
1980
Graduate School, Division of Science and Engineering, Waseda University
 

Awards & Honors

 
2014
Evaluation of transverse crack initiation in interlaminar toughened CFRP cross-ply laminates under cyclic loading, JSME Medal for Outstanding Paper, The Japan Society of Mechanical Engineers
 

Published Papers

 
Watanabe, Taichi; Satomura, Keisuke; Kimoto, Naoki; Nakamura, Takato; Kim, Tae Sung; Hosoi, Atsushi; Kawada, Hiroyuki
Zairyo/Journal of the Society of Materials Science, Japan   65(8) 567-572   Aug 2016
©2016 The Society of Materials Science.Carbon fiber reinforced plastics (CFRP) pipes are expected to substitute for steel drive shafts to improve motorcar's fuel efficiency and driving performance. The static torsional strength of CFRP pipes forme...
Effects of stacking sequence on torsional fatigue properties of CFRP pipes
WATANABE Taichi;SATOMURA Keisuke;KIMOTO Naoki;NAKAMURA Takato;KIM Tae Sung;HOSOI Atsushi;KAWADA Hiroyuki
Transactions of the JSME (in Japanese)   0(0)    2016
Application of carbon fiber reinforced plastics (CFRP) pipes to torque transmission shafts makes it possible to improve automotive driving performance as well as fuel efficiency. A modified simultaneous multi ply winding method was developed as a ...
Influence of fiber diameter on impact tensile properties of injection-molded long glass fiber reinforced polyamide
OZAWA Kento;KIM Tae Sung;TSUNODA Daichi;ARAO Yoshihiko;TANIGUCHI Norihiko;NISHIWAKI Tsuyoshi;HOSOI Atsushi;KAWADA Hiroyuki
Transactions of the JSME (in Japanese)   0(0)    2016
Applications of fiber reinforced plastics have been expanding due to improvement of not only fuel efficiency but also the motion performance of some recent vehicles. Especially, the demand for injection-molded fiber reinforced thermoplastics is ex...
120 The effect of compressive load on out-of-plane fatigue properties of thick CFRP laminates with interlaminar toughened layers
TSUGE Shiwon;SEKI Sen;HOSOI Atsushi;FUJITA Yuzo;TAKETA Ichiro;KAWADA Hiroyuki
Materials and processing conference   2015(23) "120-1"-"120-3"   Nov 2015
An effect of compressive loads on the out-of-plane fatigue properties of thick CFRP laminates with the toughened interlaminar layers was investigated. The unidirectional [O_<88>] and quasi-isotropic [45/0/-45/90]_<11s> laminates were fabricated us...
129 Fabrication of carbon nanotube-supported platinum nanoparticles for fuel cell electrode using liquid phase plasma treatment
NAKAMURA Kodai;KIM Tae Sung;HOSOI Atsushi;KAWADA Hiroyuki
Materials and processing conference   2015(23) "129-1"-"129-5"   Nov 2015
In this study, we synthesized cup-stacked carbon nanotubes (CSCNT) supported platinum nanoparticles (PtNPs) using liquid phase plasma treatment, and morphology, particle size distribution and supported amount of the PtNPs supported onto the CSCNT ...
OS1408-248 Mechanical properties of unidirectional CFRP using CNTs-grafted carbon fiber
TERAUCHI Motoki;OZAWA Sadayuki;Kim Tae Sung;KAWADA Hiroyuki
2015 "OS1408-248-1"-"OS1408-248-3"   Nov 2015
Combining composites with nanoscale materials such as Carbon Nanotubes (CNTs) has attracted much attention, because various synergic effects can be realized easily. Especially, grafting CNTs onto carbon fibers and reinforcing the interface between...
Hosoi, Atsushi;Sakuma, Shigeyoshi;Fujita, Yuzo;Kawada, Hiroyuki
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING   68 398-405   2015
Arao, Yoshihiko;Fukui, Taro;Niwa, Tomoyuki;Kawada, Hiroyuki
JOURNAL OF COMPOSITE MATERIALS   49(12) 1483-1492   2015
Sugano, Kaoru;Kurata, Masashi;Kawada, Hiroyuki
CARBON   78 356-365   2014
Evaluation of transverse crack initiation in interlaminar toughened CFRP cross-ply laminates under cyclic loading
KAWADA Hiroyuki;SOGA Masaki;SHIGEMORI Ko;HOSOI Atsushi;FUJITA Yuzo
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   80(812) SMM0079-SMM0079   2014
Initiation and growth behaviors of a transverse crack occurred in interlaminar toughened CFRP cross-ply laminates under cyclic loading were evaluated. Specimens whose stacking sequence is [0/904]S and [0/906]S were formed with T800S/3900-2B prepre...
Fatigue strength properties of interlaminar toughened CFRP laminates under cyclic loading in the out-of-plane direction
SHIGEMORI Ko;HOSOI Atsushi;FUJITA Yuzo;KAWADA Hiroyuki
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   80(812) SMM0087-SMM0087   2014
In this study, fatigue strength properties of interlaminar toughened CFRP laminates in the out-of-plane direction, or through thickness, were investigated. Thick laminates whose stacking sequence was unidirectional were formed with 88 plies of T80...
Kotani, Masahiro;Yasufuku, Yusuke;Inoue, Naoki;Kurihara, Ken;Kawada, Hiroyuki
MECHANICS OF TIME-DEPENDENT MATERIALS   17(2) 261-274   2013
Effect of Ply Thickness on Transverse Crack Initiation in CFRP Cross-Ply Laminates under Fatigue Loading
KURIHARA Ken
Transactions of the Japan Society of Mechanical Engineers Series B   79(799) 249-265   2013
The effect of ply thickness on the formation of first transverse crack caused in cross-ply carbon fiber reinforced plastic (CFRP) laminates was evaluated under fatigue loading. In addition, the initiation process of the transverse crack was observ...
Time-Dependent Deformation of CFRP Quasi-Isotropic Laminates Caused by Relaxation of Thermal Residual Stress and Physical Aging
NIWA Tomoyuki;ARAO Yoshihiko;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers Series B   79(803) 950-960   2013
In this paper, time-dependent dimensional change in quasi-isotropic laminates induced by relaxation of thermal residual stress and physical aging was predicted by the classical lamination theory. CFRP with pitch-based carbon fiber and cyanate este...
811 Effect of Fiber Content on Transverse Crack Initiation in Cross-Ply CFRP Laminates Subjected to Fatigue Loading
HOSOI Atsushi;SHIGEMORI Ko;SATO Narumichi;KAWADA Hiroyuki
Materials and processing conference   2012(20) "811-1"-"811-4"   Nov 2012
812 Time-dependent dimensional change of Quasi-isotropic laminates for CF/Epoxy and CF/Cyanate
NIWA Tomoyuki;ARAO Yoshihiko;KAWADA Hiroyuki
Materials and processing conference   2012(20) "812-1"-"812-5"   Nov 2012
816 Lifetime Assessment of Delayed Fracture in High Corrosion Resistance GFRP Laminate under Hydrochloric Acid and Deionized Water
YAJIMA Masahide;KOTANI Masahiro;KAWADA Hiroyuki
Materials and processing conference   2012(20) "816-1"-"816-4"   Nov 2012
In this paper, we investigated the lifetime of delayed fracture in woven glass fiber reinforced plastics (GFRP) laminate under corrosive environment, which possess high corrosion resistance. Corrosive environments discussed in this paper were deio...
Experimental Study on Impact Tensile Property of Glass Fiber
TANIGUCHI Norihiko;ARAO Yoshihiko;NISHIWAKI Tsuyoshi;HIRAYAMA Norio;NAKAMURA Koichi;KAWADA Hiroyuki
38(4) 137-143   Jul 2012
Arao, Yoshihiko;Taniguchi, Norihiko;Nishiwaki, Tsuyoshi;Hirayama, Norio;Kawada, Hiroyuki
JOURNAL OF MATERIALS SCIENCE   47(12) 4895-4903   2012
Arao, Yoshihiko;Yukie, Okudoi;Koyanagi, Jun;Takeda, Shin-ichi;Kawada, Hiroyuki
MECHANICS OF TIME-DEPENDENT MATERIALS   16(2) 169-180   2012
Taniguchi, Norihiko;Arao, Yoshihiko;Nishiwaki, Tsuyoshi;Hirayama, Norio;Nakamura, Koichi;Kawada, Hiroyuki
ADVANCED COMPOSITE MATERIALS   21(2) 165-175   2012
Prediction of Transverse Crack Initiation in [0m/90n]s Cross-Ply CFRP Laminates Subjected to Fatigue Loading by Static Tensile Test
HOSOI Atsushi
Transactions of the Japan Society of Mechanical Engineers Series B   78(791) 1000-1012   2012
A method to predict quantitatively the first of transverse cracks accumulated in the various types of [0m/90n]s cross-ply carbon fiber reinforced plastic (CFRP) laminates subjected to fatigue loading was proposed. On the basis of the assumption th...
Prediction of Compressive Strength for Unidirectional Fiber Reinforced Plastics in Considering Effect of Strain-Rate Dependency on Mechanical Properties of Constituent Materials
INOUE Naoki
Transactions of the Japan Society of Mechanical Engineers Series B   78(793) 1284-1299   2012
This study presents an analytical model to predict compressive strength of unidirectional FRP. Proposed model considers the effect of strain-rate dependency on mechanical properties of constituent materials. The model is based on the elastic found...
J043024 Fatigue Life Prediction for Initiation of Transverse Crack Caused in Cross-Ply CFRP Laminates under Cyclic Loading by Static Tensile Test
HOSOI Atsushi;SOGA Masaki;SATO Narumichi;KAWADA Hiroyuki
Mechanical Engineering Congress, Japan   2011 "J043024-1"-"J043024-4"   Sep 2011
A method to predict quantitatively the initiation of a transverse crack caused in the various types of [0・90,1 cross-ply carbon fiber reinforced plastic (CFRP) laminates subjected to fatigue loading was proposed. On the basis of the assumption tha...
J043044 Off-Axis Delayed Fracture Characteristic of Woven GFRP in Hydrothermal Environment
HATTORI Satoshi;KOTANI Masahiro;KAWADA Hiroyuki
Mechanical Engineering Congress, Japan   2011 "J043044-1"-"J043044-5"   Sep 2011
This paper aims to clarify the off-axis delayed fracture characteristic of woven GFRP laminate by the constant tensile load test in hydrothermal environment. Experimental condition discussed in this paper are air and deionized water at 40 -C. Stat...
Arao, Yoshihiko;Koyanagi, Jun;Utsunomiya, Shin;Kawada, Hiroyuki
COMPOSITE STRUCTURES   93(4) 1225-1230   2011
Hosoi, Atsushi;Takamura, Keigo;Sato, Narumichi;Kawada, Hiroyuki
INTERNATIONAL JOURNAL OF FATIGUE   33(6) 781-787   2011
Kotani, Masahiro;Yamamoto, Yohei;Shibata, Youhei;Kawada, Hiroyuki
ADVANCED COMPOSITE MATERIALS   20(6) 519-535   2011
Out-of-Plane Deformation due to the Ply Angle Misalignment in CFRP Laminates (The Effect of the Stacking Sequence on Thermal Deformation)
ARAO Yoshihiko;KOYANAGI Jun;TAKEDA Shin-ichi;UTSUNOMIYA Shin;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers Series B   77(776) 619-628   2011
Strict geometrical stability is required for the precise structures like telescopes. Unpredictable out-of-plane deformation is a serious problem when we use CFRP (Carbon Fiber Reinforced Plastic) laminate to the precise structure. This out-of plan...
Evaluation of Transverse Crack Initiation in Cross-Ply CFRP Laminates under Fatigue Loading
TAKAMURA Keigo;HOSOI Atsushi;SATO Narumichi;KAWADA Hiroyuki
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   77(779) 1123-1134   2011
In this study, transverse crack initiation in cross-ply CFRP laminates under fatigue loading was evaluated focusing on the transverse crack growth and saturation. The number of cycles that a transverse crack initiates was predicted by the analytic...
Prediction of Time-Dependent Dimensional Change Induced by Thermal Residual Stress Relaxation in CFRP Cross-Ply Laminates
ARAO Yoshihiko;OKUDOI Yukie;TAKEDA Shin-ichi;KOYANAGI Jun;UTSUNOMIYA Shin;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers Series B   77(780) 1238-1246   2011
In this paper, time-dependent dimensional change in a symmetrical cross-ply laminates was predicted by transverse properties of the CFRP laminates. CFRP with pitch-based carbon fiber and cyanate ester resin was chosen for the study. Viscoelastic p...
Strength Prediction Method for Glass Fiber Embedded in Single Fiber Composite in Hydrothermal Environment
KOTANI Masahiro;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers Series B   77(783) 1956-1966   2011
Mechanical properties of glass fiber reinforced plastics (GFRP) mainly depend on the mechanical properties of the glass fiber, which decreases with stress and corrosion. Thus, the calculation method to predict the residual fiber strength after exp...
Evaluation of Transverse Crack Initiation in Cross-Ply CFRP Laminates under Fatigue Loading
TAKAMURA Keigo;HOSOI Atsushi;SATO Narumichi;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers Series B   77(779) 1123-1134   2011
In this study, transverse crack initiation in cross-ply CFRP laminates under fatigue loading was evaluated focusing on the transverse crack growth and saturation. The number of cycles that a transverse crack initiates was predicted by the analytic...
Interfacial Property of GFRP in Hydrothermal Environment : Evaluation of Interfacial Adhesive Strength Using Unidirectional GFRP
KOTANI Masahiro;ARAO Yoshihiko;TAKAHASHI Aki;HATTORI Satoshi;KOBIKI Akira;KAWADA Hiroyuki
Journal of JSEM   10(4) 413-419   Dec 2010
An Improvement of the Glass Fiber Strength Embedded in a Resin by Removing Moisture around the Fiber Surface
ARAO Yoshihiko;KOTANI Masahiro;SATO Shinya;KAWADA Hiroyuki
Journal of JSEM   10(4) 420-424   Dec 2010
531 Strengthening Mechanism of glass fiber under cryogenic temperature
NOGUCHI Yohei;KOTANI Masahiro;ARAO Yoshihiko;TANIGUCHI Norihiko;NISHIWAKI Takeshi;HIRAYAMA Norio;KAWADA Hiroyuki
Materials and processing conference   2010(18) "531-1"-"531-4"   Nov 2010
Strength Degradation Behavior of Glass Fiber Embedded in Single Fiber Composite under Hot Water Environment
KOTANI Masahiro;KOBIKI Akira;YASAFUKU Yusuke;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers. A   76(767) 982-987   Jul 2010
Long-term durability of glass fiber reinforced plastics (GFRP) under water environment is strongly influenced by the strength degradation of its fiber reinforcement. Constant strain test in water, in which stress corrosion cracking (SCC) is initia...
Tensile Fracture Properties of Single Glass Fiber in Cryogenic Environment(<Special Issue>M & P 2009 The 9th Materials and Processing Conference)
HAYAKAWA Mamoru;TANIGUCHI Norihiko;NISHIWAKI Tsuyoshi;HIRAYAMA Norio;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers. A   76(766) 652-654   Jun 2010
The strengthening mechanism of the glass-fiber at cryogenic temperature has not been fully studied so far. In the present study, tensile tests of a single E-glass fiber with heat treatment in air and liquid nitrogen were conducted to reveal the st...
Strain-rate Dependency of Interfacial Strength in Polymer Matrix Composite(<Special Issue>M & P 2009 The 9th Materials and Processing Conference)
OHISHI Taiji;SATO Shinya;KAWADA Hiroyuki
Transactions of the Japan Society of Mechanical Engineers. A   76(766) 669-671   Jun 2010
The interfacial strength is the most important mechanical property among those of constituents in Polymer Matrix Composite: PMC. In this study, we conducted the tensile tests on Single Fiber Composite specimen and observed initiation of interfacia...
Hosoi, Atsushi;Sato, Narumichi;Kusumoto, Yasuyuki;Fujiwara, Keita;Kawada, Hiroyuki
INTERNATIONAL JOURNAL OF FATIGUE   32(1) 29-36   2010
Arao, Yoshihiko;Koyanagi, Jun;Utsunomiya, Shin;Kawada, Hiroyuki
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES   17(5) 328-334   2010
Koyanagi, Jun;Yoshimura, Akinori;Kawada, Hiroyuki;Aoki, Yuichiro
APPLIED COMPOSITE MATERIALS   17(1) 31-41   2010
一方向強化PMCのクリープ寿命予測(3Dシアラグクリープモデルの提案と検討)
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.359-360    Mar 2004
高分子材料の粘弾塑性挙動における材料非線形性に関する研究
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.363-364    Mar 2004
SFCにおける界面はく離の時間依存特性について
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.369-370    Mar 2004
擬似等方性炭素繊維強化プラスチックの疲労特性(2段変動荷重試験における疲労寿命の調査)
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.373-374    Mar 2004
GFRPの応力腐食割れに関する研究(環境溶液の影響による微視的き裂進展特性)
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.377-378    Mar 2004
水環境下におけるガラス繊維の劣化(表面状態変化の強度低下に及ぼす影響)
日本機械学会 関東支部 第10期総会講演会 講演論文集   №040-1 pp.379-380    Mar 2004
産官学連携の取り組み
第34回FRPシンポジウム      Mar 2004
Creep rupture model taking into account interfacial debonding in unidirectional composites
4th International Conference on Mechanics of Time Dependent Materials   第4巻    Oct 2003
GFRPの応力腐食割れに関する研究(環境溶液の影響による微視的き裂進展特性)
第28回複合材料シンポジウム 講演要旨集 / 日本複合材料学会   pp.33-34    Oct 2003
SFCにおける界面き裂の時間依存特性に関する研究
日本複合材料学会第28回複合材料シンポジウム講演要旨集   pp.53-54    Oct 2003
一方向複合材料のクリープ寿命予測(隣接破断繊維による応力集中と界面はく離進展の影響)
日本機械学会第11回機械材料・材料加工技術講演会講演論文集   pp.165-166    Oct 2003
擬似等方性炭素繊維強化プラスチックの疲労特性(損傷進展観察による変動荷重下の疲労寿命の考案)
日本機械学会第11回機械材料・材料加工技術講演会講演論文集   pp.171-172    Oct 2003
一方向FRPのクリープ寿命予測(繊維破断部近傍の界面はく離を考慮したクリープ破断モデル)
日本機械学会2003年度年次大会講演論文集Vol.Ⅰ   Vol.Ⅰ №03-1 pp.367-368    Aug 2003
PMCの応力腐食割れに関する基礎的研究(界面劣化による強じん化機構の変化)
日本機械学会2003年度年次大会講演論文集Vol.Ⅰ   Vol.Ⅰ №03-1 pp.369-370    Aug 2003
A Study on Stress-Corrosion Cracking Using Single Fiber Model Specimen (Degradation Properties of GFRP caused by Water Absorption)
JSME International Journal Series A Solid Mechanics and Material Engineering / The Japan Society of Mechanical Engineers   Vol.46 No.3 July 2003 pp.303-3    Jul 2003
A Study of GFRP on Stress Corrosion Cracking
14th International Conference on Composite Materials (ICCM-14)      Jul 2003
Prediction of Creep Rupture Unidirectional Composite (Creep Rupture Model with Interfacial Debonding around Broken Fibers)
14th International Conference on Composite Materials (ICCM-14)      Jul 2003
横方向衝撃負荷を受けるGFRP円筒の応力波伝播挙動
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.105-106    May 2003
擬似等方性アルミナFRP積層板の疲労特性(疲労損傷に及ぼす周波数及び積層構成の影響)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.9-10    May 2003
フェノール基複合材料の長期信頼性評価(温度時間換算則による長期引張りクリープ挙動の推定)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.69-70    May 2003
一方向FRPのクリープ寿命予測(繊維破断部近傍の界面はく離を考慮したクリープ破断モデル)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.75-76    May 2003
単繊維フラグメンテーション試験を用いた環境溶液拡散による構成要素の劣化(界面の劣化および再接着の検討)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.77-78    May 2003
PMCの応力腐食割れに関する基礎的研究(界面劣化による強じん化機構の変化)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.79-80    May 2003
FW製GFRP円筒材の軸方向引張り特性(強度推定法の提案)
日本複合材料学会2003年度研究発表講演会予稿集   日本複合材料学会 pp.109-110    May 2003
一方向繊維強化プラスチックのクリープ特性と寿命予測—繊維破断部近傍の界面はく離を考慮したクリープ破断モデル一方向繊維強化
日本複合材料学会誌   日本複合材料学会 Vol.29 (4) pp.136 200    2003
Fatigue Properties of Quasi-Isotropic Alumina-Fiber Reinforced Plastic laminates
第7回 SAMPE先端材料技術国際会議      Nov 2001
Fundamental Study on Flexural Fatigue Properties in Flexible Printed Circuit Properties of Phenoxy/Epoxy Resin with Mixing Ratio
第7回 SAMPE先端材料技術国際会議      Nov 2001
Off-axis stress relaxation behavior of unidirectional T800H/Epoxy at elevated temperature and its macromechanical analysis
第7回 SAMPE先端材料技術国際会議      Nov 2001
ウェーブレット変換を用いたGFRP積層板中の応力破伝播挙動の解明
第5回複合材システムの耐久性解析に関する国際会議   B-21    Nov 2001
単繊維モデルを用いたGFRP の応力腐食割れに関する研究(界面劣化と繊維損傷機構)
第9回機械材料・材料加工技術講演会/日本機械学会   pp.11    Nov 2001
酸応力環境下におけるGFRP 織物積層板のき裂進展特性と微視的損傷過程
第9回機械材料・材料加工技術講演会/日本機械学会   pp.7    Nov 2001
酸応力環境下におけるGFRP織物積層板のき裂進展挙動(溶媒の拡散と下限界特性)
2001年度年次大会講演論文集/日本機械学会   5.pp.109-110    Aug 2001
単繊維モデル試験片を用いた複合材料の応力腐食割れ(構成基材と界面の劣化特性)
2001年度年次大会講演論文集/日本機械学会   5.pp.107-108    Aug 2001
擬似等方性アルミナ繊維強化プラスチックの疲労特性(内部損傷の発達と疲労寿命)
2001年度年次大会講演論文集/日本機械学会r&0d0a;   5.pp.105-106    Aug 2001
極低温下におけるGFRP円筒の疲労特性(疲労特性に及ぼす負荷形式の影響)
2001年度研究発表講演会予稿集/日本複合材料学会   pp.111-112    Jun 2001
FPC耐久性向上に関する基礎研究〜フェノキシ・エポキシ樹脂の機械的性質と界面破壊じん性における混合率の影響〜
2001年度研究発表講演会予稿集/日本複合材料学会   pp.15-16    Jun 2001
Evaluation of the Mechanical Properties of PMC Interface using Slice Compression Test-Analysis of Transfer Mechanism of Interfacial Shear Stress
Composit Interfaces   Vol.7, No.5,6, pp349-361    Apr 2001
繊維モデル試験片を用いたGFRPの応力腐食割れに関する研究(応力下での拡散現象と繊維破壊メカニズム)
第31回FRPシンポジウム講演論文集/日本材料学会      Mar 2001
酸応力環境下におけるGFRP織物積層板のき裂進展挙動(環境条件と下限界特性)
第31回FRPシンポジウム講演論文集/日本材料学会      Mar 2001
FPCの屈曲特性に関する基礎的研究(フェノキシ/エポキシ樹脂の機械的特性と界面破壊じん性における混合率の影響)
第30回FRPシンポジウム講演論文集/日本材料学会      Mar 2001
高強度鋼の超寿命疲労特性に及ぼす内部介在物の影響(介在物の機械的性質と疲労寿命)
関西支部第76期定時総会講演会講演論文集/日本機械学会関西支部   pp.5.3-5.4    Mar 2001
複合材料活用辞典
産業調査会出版      2001
酸応力環境下におけるGFRP織物積層板の応力腐食割れ(拡散係数と下限界特性)
研究集会報告/九州大学応用力学研究所   11ME-S1, pp.77-81    Mar 2000
極低温下におけるGFRP円筒の圧縮—圧縮疲労特性(粘弾性—塑性モデルを用いたエネルギー損失による疲労寿命推定)
日本機械学会論文集(A編)/日本機械学会   66; 643, pp.489-495    Mar 2000
酸応力環境下におけるGFRPのき裂進展挙動(母材樹脂中の拡散現象と下限界特性)
第29回FRPシンポジウム講演論文集/日本材料学会   pp.343-346    Mar 2000
非線形ヒステリシツモデルに基づくアルミナFRP円筒の繰返し負荷応力下における応力—ひずみ特性(エネルギーアプローチによる疲労寿命評価の検討)
第29回FRPシンポジウム講演論文集/日本材料学会   pp.225-228    Mar 2000
酸応力環境下におけるGFRPのき裂進展挙動(母材樹脂中の拡散現象とシミュレーション)
第24回複合材料シンポジウム講演要旨集/日本複合材料学会   pp.157-158    Nov 1999
アルミナFRP円筒の疲労損傷と粘弾性モデリング
第24回複合材料シンポジウム講演要旨集/日本複合材料学会   pp.173-174    Nov 1999
Crushworthiness of Polymeric Matrix Composites for Automabile
7th Euro-Japanese Symposium/ECOLE DES MINES DE PARIS   Composite Materials and Transp    Jul 1999
マルチモード光ファイバを用いたGFRP積層板の損傷検出(マイクロクラックの検出とその場観察)
1999年度年次大会講演論文集/日本機械学会   1, pp.321-322    Jul 1999
酸応力環境下におけるGFRP織物積層板のき裂進展特性(下限界特性と微視的破壊機構)
1999年度年次大会講演論文集/日本機械学会   3, pp.221-222    Jul 1999
Slice Compression試験によるPMC界面の力学的特性評価(界面はく離進展挙動)
1999年度年次大会講演論文集/日本機械学会   3, pp.225-226    Jul 1999
Crack Propagation Properties of GFRP Laminates under Acid Stress Environment
Proceeds of Twelfth International Conference on Composite Materials   pp.147    Jul 1999
Evaluating the Mechanical Properties of Glass Fiber/Epoxy Interfaces using the Slice Compression Test
Proceeds of Twelfth International Conference on Composite Materials   pp.227    Jul 1999
Applicability of Fracture Toughness Concept to Fracture Behavior of Carbon/Carbon Composite
JSME International Journal Series A/日本機械学会   42; 2, pp.265-271    Apr 1999
酸応力環境下におけるGFRP織物積層板のき裂進展と下限界特性に及ぼす環境温度の影響
1999年度研究発表講演会予稿集/日本複合材料学会   pp.41-42    Apr 1999
アルミナFRP円筒の圧縮疲労特性(疲労損傷の過程と剛性低下)
1999年度研究発表講演会予稿集/日本複合材料学会   pp.53-54    Apr 1999
マルチモード光ファイバを用いたGFRP積層板の損傷検出(検出原理とその有効性の評価)
1999年度研究発表講演会予稿集/日本複合材料学会   pp.61-62    Apr 1999

Books etc

 
JSMEテキストシリーズ 機械材料学
日本機械学会編
日本機械学会   Jan 2008   ISBN:978-4-88898-169-9

Research Grants & Projects

 
Development of Innovative Ultra-Light Weighted and High Strength Composite using Densified Untwisted CNT
Project Year: Apr 2015 - Mar 2018
Fabrication of Hierarchical Composite Reinforced with CNT Deposited Fiber and Interfacial Evaluation, and Impact, Fatigue Properties
Project Year: Apr 2012 - Mar 2015
The aim of this study is to fabricate the innovative polymer matrix composite (PMC) which is reinforced by carbon nanotubes (CNTs). As an introducing method of CNTs into PMC, synthesizing CNTs on the inorganic fibers such as glass fiber, tyranno f...
Damage Evolution and Long-Term Durability of Polymer Matrix Composite in Water Environment
The aim of this research is to investigate the long term durability of GFRP in hydrothermal environment and to propose its lifetime prediction model. The GFRP under study is consisted with plain E-glass cloth and vinylester resin. The constant ten...
Time Dependent Characteristics and Long-term Reliability of PMC in Hostile Environment
Polymer matrix composites(PMC) such as Fiber Reinforced Plastics(FRP) have numerous variations in its components, and therefore it is possible to design its mechanical properties corresponding to its application. Previous researches dealing long-t...
Long-term Durability of GFRP under Corrosive Environment
Fiber reinforced plastics (FRP) are widely used in structural applications because of their good specific stiffness and strength. In addition, corrosive resistance of the FRP is superior to conventional materials. Therefore use of the FRP under co...

Patents

 
2014-172308 : FRP円筒及びその製造方法
川田 宏之
2001-255248 : 積層材料の層間破壊じん性試験装置
中屋 久仁康, 森山 英重, 川田 宏之