堀田 幹則

Preparation of boron carbon oxynitride phosphor films with compositional and spectral tunability by chemical vapor deposition 

Ceramics International 48(20) 31016-31022 2022年10月15日  

Improvement in fracture strength of porous reaction-bonded silicon carbide with unique surface layer by incorporating α-silicon carbide powder as a secondary phase 

Journal of the European Ceramic Society 42(13) 5458-5463 2022年10月  

Microstructure and integrity of multilayer ceramic coating with alumina top coat on silicon carbide by laser chemical vapor deposition 

Ceramics International 2022年  

High fracture toughness AlN achieved by addition of AlN whiskers and tape-casting 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 130(1) 195-198 2022年1月  

Control of microstructure and mechanical properties of sintered aluminum nitride through addition of aluminum nitride whiskers 

Journal of Asian Ceramic Societies 2021年  

Preparation of zirconium carbonitride by laser chemical vapor deposition using alkyl-amide precursor as a single source 

Journal of the Ceramic Society of Japan 128(11) 855-862 2020年11月1日  

Improving the thermal conductivity of epoxy composites using a combustion-synthesized aggregated beta-Si3N4 filler with randomly oriented grains 

SCIENTIFIC REPORTS 10(1) 2020年9月  

Effect of heating rate on the porous structure of an alumina/resin foamed body obtained via direct foaming 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 128(9) 577-581 2020年9月  

Preparation of boron carbon oxynitride phosphor film via laser chemical vapor deposition and annealing 

Surface and Coatings Technology 394 2020年7月25日  

Comparison of alumina granules prepared by spray freeze granulation drying and spray drying 

Journal of the Ceramic Society of Japan 128(11) 2020年  

Effect of thermal conductivity of ceramic compact on the porous structures of foamed bodies via direct-foaming method 

JOURNAL OF ASIAN CERAMIC SOCIETIES 8(1) 176-182 2020年1月  

FABRICATION AND MICROSTRUCTURES OF POROUS ALUMINA WITH POROUS-AND-DENSER ZEBRA-PATTERNED SURFACES CREATED BY ONE-POT DIRECT BLOWING METHOD 

PROCEEDINGS OF THE 42ND INTERNATIONAL CONFERENCE ON ADVANCED CERAMICS AND COMPOSITES: CERAMIC ENGINEERING AND SCIENCE PROCEEDINGS, VOL 39, ISSUE 3 39(3) 69-76 2019年  

Fabrication and characterization of porous alumina with a surface layer composed of alumina platelet by direct-foaming method 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 125(4) 375-377 2017年4月  査読有り

Fabrication and characterization of porous alumina with denser surface layer by direct foaming 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 125(1) 7-11 2017年1月  査読有り

Powder layer manufacturing of alumina ceramics using water spray bonding 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 124(6) 750-752 2016年6月  査読有り

New Approach for Macro Porous RB-SiC Derived from SiC/Novolac-type Phenolic Composite 

JOURNAL OF THE AMERICAN CERAMIC SOCIETY 99(2) 440-444 2016年2月  査読有り

Preparation and Characterization of RB-SiC Ceramics Fabricated From Phenolic Resin/SiC 

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II: A Collection of Papers Presented at the 39th International Conference on Advanced Ceramics and Composites January 25-30, 2015 Daytona Beach, Florida 21-25 2015年12月28日  査読有り

Antimicrobial Characteristics of Heated Eggshell Powder 

BIOCONTROL SCIENCE 20(4) 239-246 2015年12月  査読有り

Preparation of reaction-bonded porous silicon carbide with denser surface layer in one-pot process 

JOURNAL OF THE CERAMIC SOCIETY OF JAPAN 123(1444) 1106-1108 2015年12月  査読有り