Friction between wood and metal is an important factor in the wood deforming process. To investigate the friction characteristics under high pressure conditions (above 1MPa) which are generated during deforming processing, we examined the influenc...

Preparation of High Density Products from Various Biomass Resources Using Their Injectabilities

成田昌示, 松浦規夫, 三木恒久, 金山公三, 畑中伸夫, 高倉章雄

日本機械学会論文集 C編(Web) 78(790) 2292-2301 (WEB ONLY) 2012

Attempt on Improving Property of Highly-densified Biomass Resources for Renewable Energy

N. Matsuura，M. Narita，T. Miki，K. Kanayama，N. Takakura

International Journal of Computer Applications in Technology 45(45) 93-97 2012 [Refereed]

Enthalpy relaxation behavior of dry wood detected by temperature-modulated differential scanning calorimetry

T. Miki，H. Sugimoto，K. Kojiro，Y. Furuta，K. Kanayama

JOURNAL OF WOOD SCIENCE 58(5) 391-398 Oct 2012 [Refereed]

Thermal behaviors and transitions of wood detected by temperature-modulated differential scanning calorimetry

T. Miki，H. Sugimoto，K. Kojiro，Y. Furuta，K. Kanayama

Journal of wood science 58(58) 300-308 Aug 2012 [Refereed]

Studies on bamboo for sustainable and advanced utilization

M. Nakajima，K. Kojiro，H. Sugimoto，T. Miki，K. Kanayama

Energy 36(36) 2049-2054 Apr 2011 [Refereed]

Destabilization of Wood Microstructure Caused by Drying

,K. Kojiro，T. Miki，H. Sugimoto，K. Kanayama

Wood Material Science and Engineering (6) 69-74 2011 [Refereed]

Small Container Fabrication Using Closed Die Wood Forging

S..Kajikawa，T. Iizuka，K. Yamaishi，N. Hatanaka，N. Takakura，K. Kanayama

STEEL RESEARCH INTERNATIONAL 229-232 2011 [Refereed]

Micropores and mesopores in the cell wall of dry wood

,K. Kojiro，T. Miki，H. Sugimoto，M. Nakajima，K. Kanayama

Journal of Wood Science 56(2) 107-111 Apr 2010 [Refereed]

5,6-Dichloroindole-3-acetic Acid and 4-Chloroindole-3-acetic Acid, Two Potent Candidates for New Rooting Promoters without Estrogenic Activity

Masato Katayama，Takao Saito，Kozo Kanayama

JOURNAL OF PESTICIDE SCIENCE 35(2) 134-137 2010 [Refereed]

The pliability of wood and its application to molding

O. Yamashita，H. Yokochi，T. Miki，K. Kanayama

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY 209(209) 5239-5244 Jul 2009 [Refereed]

Deformation processing of wood system material

金山公三

Cellulose communications 16(1) 12-15 Feb 2009

Effects of Mixing Temperature and Wood Powder Size on Mechanical Properties of Wood Plastic Recycled Composite

T. Miki，H. Sugimoto，K. Kanayama，K. Yamamoto

Journal of Solid Mechanics and Materials Engineering 3(4) 624-634 2009 [Refereed]

Synthesis and Biological Activities of 4-Trifluoromethylindole-3-acetic Acid; A New Fluorinated Indole Auxin

Masato Katayama，Yuko Masui，Eiji Kageyama，Youichi Kawabata，Kozo Kanayama

BIOSCIENCE BIOTECHNOLOGY AND BIOCHEMISTRY 72(8) 2025-2033 Aug 2008 [Refereed]

Dielectric Relaxation of Water Adsorbed on Cellulose

H. Sugimoto，T. Miki，K. Kanayama，M. Norimoto

JOURNAL OF NON-CRYSTALLINE SOLIDS 354(27) 3220-3224 Jun 2008 [Refereed]

Three Dimensional Forming of Wood via Large Shearing Deformation

Kanayama Kozo

Annals of the High Performance Paper Society, Japan 47(0) 11-17 2008

For the purpose of further utilization of woody bioresources, novel deformation processing was contrived by noting the fluidity of wood via share-induced slipping off between fiber cell walls. Conventional compressive deformation processing using ...

Thermoplastic Behavior of Wood Powder Compacted Materials

T. Miki，H. Sugimoto，K. Kanayama

JOURNAL OF MATERIALS SCIENCE 42(18) 7913-7919 Sep 2007 [Refereed]

Material Development from Wood Powder without Adhesive by Vapor Steaming Compaction Process

T. Miki，K. Takeuchi，H. Sugimoto，K. Kanayam

Journal of Materials Processing Technology 199(1) 396-401 2007 [Refereed]

Performance Study of Compact Wood Powder Material Processing for Improved Impact Characteristics Aiming at Substitute for Plastics

T. Miki，K. Takeuchi，H. Sugimoto，K. Kanayama,

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (192) 422-427 2007 [Refereed]

Dielectric Relaxation of Water Adsorbed on Wood and Charcoal

H. Sugimoto，K. Kanayama，M. Norimoto

HOLZFORSCHUNG 61(61) 89-94 2007 [Refereed]

Fine structure changes of wood during moisture adsorption and desorption process analyzed by X-ray diffraction measurement

Sugino Hideaki, Sugimoto Hiroyuki, Miki Tsunehisa, Kanayama Kozo

MOKUZAI GAKKAISHI 53(2) 82-89 2007 [Refereed]

Recycling of wood waste as sustainable industrial resources - Design of energy saving wood-based board for floor heating systems

Obata Yoshihiro, Takeuchi Kazutoshi, Soma Naho, Kanayama Kozo

ENERGY 31(13) 2341-2349 Oct 2006 [Refereed]

DIELECTRIC RELAXATION OF ADSORBED WATER IN WOOD, PAPER AND CHARCOAL

Sugimoto Hiroyuki, Miki Tsunehisa, Norimoto Misato, Kanayama Kozo

WOOD STRUCTURE AND PROPERTIES' 06 405-+ 2006 [Refereed]

Recycling of Wood Waste as Sustainable Industrial Resource - Design of Energy Saving Wood-based Board for Floor Heating Systems -

Yoshihiro Obata，Kazutoshi Takeuchi，Naho Soma，Kozo Kanayama

ENERGY 31(13) 2341-2349 2006 [Refereed]

Flow Properties of Wood Powder-Plastic Mixture I. Understanding of flow properties by capillary flow tests

今西祐志, 相馬奈歩, 竹内和敏, 杉野秀明, 金山公三

木材学会誌 51(3) 166-171 May 2005

Roller Compression of Wood

INOUE Masafumi, ADACHI Koji, OMAE Kosuke, KOHARA Mitsuhiro, KANAYAMA Kozo

Journal of the Japan Wood Researh Society 51(2) 104-109 Mar 2005

Production of wood cups by hot pressing using wood powders only

T. Miki，N. Takakura，T. Iizuka，K. Yamaguchi，K. Kanayama

MATERIALS FORUM 29 430-434 2005 [Refereed]

Injection Moulding of Wood Powder with Low Binder Content

T. Miki，N. Takakura，T. Iizuka，K. Yamaguchi，H. Imanishi，K. Kanayama

JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING 48(4) 387-392 2005 [Refereed]

Research on better use of wood for sustainable development, Quantitative evaluation of good tactile warmth of wood

Yoshihiro Obata，Kazutoshi Takeuchi，Yuzo Furuta，Kozo Kanayama

ENERGY 30(8) 1317-1328 2005 [Refereed]

Control of Grading Structure and Thermal Conductivity of Wood by Compressing Proces

Yoshihiro Obata，Kazutoshi Takeuchi，Kouichi Akaeda，Kozo Kanayam

Materials Science Forum (492) 281-286 2005 [Refereed]

Effect of Production Conditions of Wood Powder on Bending Property of Wood Powder Molding Material without Adhesive

H. Imanishi，N. Soma，O. Yamashita，T. Miki，K. Kanayama

JSME International Journal Series A 48(4) 432-436 2005 [Refereed]

Liquid Impregnation of Dry Wood Using a Roller-pressing Method I. : Effect of transverse compressive deformation on liquid impregnation

ADACHI Koji, INOUE Masafumi, KANAYAMA Kozo, KAWAI Shuichi

Journal of the Japan Wood Researh Society 49(6) 416-422 Nov 2003

Press-Forming Technique for Sliced Wood Sheets

TAKEUCHI Kazutoshi, NOGI Masaya, IMANISHI Hiroshi, FURUTA Yuzo, KANAYAMA Kozo

塑性と加工 44(507) 447-451 Apr 2003 [Refereed]

木材の接触温冷感評価における傾斜性の考慮

小畑良洋, 竹内和敏, 川添正伸, 金山公三

傾斜機能材料論文集 2002 48-53 Mar 2003 [Refereed]

Effects of Forming Conditions on Compaction Characteristics of Wood Powders.

三木恒久, 高倉章雄, 金山公三, 山口克彦, 飯塚高志

日本機械学会論文集 C編 69(678) 502-508 Feb 2003

Production of long rods by sequential extrusion of wood powders

T. Miki，N. Takakura，T. Iizuka，K. Yamaguchi，K. Kanayama

Journal of Materials Processing Technology 140 407-412 2003 [Refereed]

Possibility of Extrusion of Wood Powders

T. Miki，N. Takakura，T. Iizuka，K. Yamaguchi，K. Kanayama

JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING 46(3) 371-377 2003 [Refereed]

Design of Functionally Graded Wood-based Board for Floor Heating System with Higher Energy Efficiency

Yoshihiro Obata，Kazutoshi Takeuchi，Masanobu Kawazoe，Kozo Kanayama

Materials Science Forum (423) 819-824 2003 [Refereed]

Humidity Control Efficiency of Wood Materials Compounded with Inorganic Matter. Improvement of humidity control efficiency of wood material by introducing the capillary condensation mechanism.

今西祐志, 竹内和敏, 古田裕三, 小畑良洋, 金山公三

木材学会誌 48(4) 265-271 Jul 2002 [Refereed]

ファインウッド創製の試み

金山公三, 今西祐志

Cellul Commun 9(2) 81-85 Jun 2002 [Refereed]

Engineering Evaluation of Tactile Warmth for Wood

Yoshihiro Obata，Kazutoshi Takeuchi，Hiroshi Imanishi，Yuzo Furuta，Kozo Kanayama

,International Journal of the Society of Materials Engineering for Resources 10(1) 14-19 2002 [Refereed]

Cupping of Compressed Wood Resulting from Set Recovery.

井上雅文, 足立幸司, 金山公三

木材学会誌 47(3) 198-204 May 2001 [Refereed]

Thermal-softening properties of water-swollen wood, The relaxation process due to water soluble polysaccharides

Y. Furuta，Y. Obata，K. Kanayama

Journal of Materials Science 36(4) 887-890 2001 [Refereed]

Mechanical and Dielectric Relaxations of Wood in a Low Temperature Range IV. Dielectric properties of adsorbed water at high moisture contents.

横山操, 大前宏輔, 金山公三, 古田裕三, 則元京

木材学会誌 46(6) 523-530 Nov 2000

Changes of Dielectric Relaxation of Wood by Acetylation.

横山操, 大前宏輔, 金山公三, 古田裕三, 則元京

木材学会誌 46(5) 406-412 Sep 2000 [Refereed]

Mechanical and Dielectric Relaxations of Wood in the Low Temperature Range. III. Application of sech law to dielectric properties due to adsorbed water.

横山操, 金山公三, 古田裕三, 則元京

木材学会誌 46(3) 173-180 May 2000 [Refereed]

Evaluation of Tactile Warmth of Wood by Thermal Effusivity.

小畑良洋, 小原光博, 古田裕三, 金山公三

木材学会誌 46(2) 137-141 Mar 2000 [Refereed]

Thermal-Softening Properties of Water-Swollen Wood. VII. The effects of lignin.

古田裕三, 今西祐志, 小原光博, 横山操, 小畑良洋, 金山公三

木材学会誌 46(2) 132-136 Mar 2000 [Refereed]

ナノ複合セラミックスにおける粒界残留応力の強度・靭性に及ぼす影響解析

宮島達也, 兼松渉, 金山公三, 古田裕三, 山内幸彦, 伊藤正治, コバレフセルゲイ

名古屋工業技術研究所報告 49(1) 39-42 2000

圧密加工木材の表面物性の評価

辻直幸, 金山公三, 中山伸吾, 岸久雄, 木村哲

三重県工業技術総合研究所研究報告 (23) 36-42 Dec 1999

Development and fire resistance processing of the chemical grouting method to the woody material.

金山公三, 古田裕三, 小原光博

名古屋工業技術研究所報告 48(1) 36-39 Jul 1999

Relationships between Acoustic Emission Behavior and Internal Friction of Picea sp. under a Tensile Pulsated Load.

小原光博, 安藤幸世, 古田裕三, 金山公三, 奥山剛

木材学会誌 45(3) 208-214 May 1999

Thermal-Softening Properties of Water-Swollen Wood. VI. The change of Thermal-Softening Properties due to lignification with moso bamboo as a model material.

古田裕三, 小原光博, 金山公三

木材学会誌 45(3) 193-198 May 1999 [Refereed]

Roll press for wood processing design guidelines and processing examples.

金山公三

木材工業技術短信 16(2) 1-9 Nov 1998

Characteristics of Compressive Deformation of SUGI (Japan cedar).

金山公三, 平井幸男, 小原光博, 重松一典

材料試験技術 43(2) 132-137 Apr 1998 [Refereed]

Analysis of Constituences with Laser Machining of Si3N4 and SiC

I. Shigematsu，K. Kanayama，A. Tsuge，M. Nakamura

Journal of Materials Science Letters 17(9) 737-739 1998 [Refereed]

Damages in Wood Beams Caused by Fatigue under Pulsating Loads.

小原光博, 金山公三, 中井朱美, 永田和夫, 奥山剛

木材学会誌 43(11) 909-915 Nov 1997 [Refereed]

Laser Machinability of Zirconia with an Addition of Y2O3.

重松一典, 金山公三, 中村守, 浅尾文博, 三宅卓志, 久保勝司

材料試験技術 39(2) 121-127 Apr 1994

Production of Tapered Cups by Sequential Deep Drawing of Sheet Metals Using Drawn Cups as a Part of Punch

k. Yamaguchi，k. Kanayama，M.H.Parsa，N. Takakura

Transactions of the ASME (Journal of Engineering for Industry) 115(2) 224-229 1993 [Refereed]

Joining of Si3N4 Ceramics with Nickel and Ni-Cr Alloy Laminated Interlayers

M. Nakamura，I. Shigematsu，K. Kanayama，Y. Hirai

Journal of Materials Science Letters 12 716-718 1993 [Refereed]

Heat Resistance of Si3N4 joined with Ni-Cr Alloy Interlayer

M. Nakamura，I. Shigematsu，K. Kanayama，Y. Hirai

Journal of the Ceramic Society of Japan,Int.Edition 100 1444-1446 1993 [Refereed]

Misc

Plain Text

Legality of Logging and Sustainability of Resources about Ulin Grown in Indonesia

渕上佑樹, 神代圭輔, 林田元宏, 奥村哲也, 溝口正, 渕上ゆかり, 田中聡一, 梅村研二, 古田裕三, 金山公三

木材工業 73(9) 352‐357 Sep 2018

Extrusion properties of bulk wood: effects of die angle on the extrusion force

M.Seki, T. Miki，S Tanaka, I. Sigematsu，K. Kanayama

proc of ACMFMS 2014 57-60 Oct 2014 [Refereed]

Mechanical properties of wood treated by poly ethylene glycol polymers

S Tanaka, M.Seki, T. Miki， I. Sigematsu，K. Kanayama

Proceedings of the 4th Asian Conference on Mechanics of Functional Materials and Structure 69-72 Oct 2014 [Refereed]

Advanced Wood Shaping Techniques for Sustainable Developments

T. Miki， S Tanaka, M. Seki， I. Sigematsu，K. Kanayama

Proceedings of The 9th Conference on Sustainable Development of Energy, Water and Environment Systems 85 1-10 Sep 2014 [Refereed]

Method to impregnate poly ethylene glycol polymers to cell walls of wood by drying treatment at an appropriate relative humidity

S Tanaka, M.Seki, T. Miki， I. Sigematsu，K. Kanayama

Proceedings of 9th Conference on Sustainable Development of Energy, Water and Environment Systems Sep 2014 [Refereed]

流動成形におけるバイオマスの流動メカニズムの解明

宇高英二, 三木恒久, 杉元宏行, 金山公三

香川県産業技術センター研究報告 (9) 11-14 Jun 2009

Color Changes of Compressed Wood.

松本奈緒美, 辻直幸, 中山伸吾, 小原光博, 金山公三

三重県工業技術センター研究報告 (22(1997)) 50-53 1998

Laser machinability of Zirconia with a Y2O3 additive.

重松一典, 中村守, 金山公三

名古屋工業技術研究所報告 44(12) 709-717 Dec 1995

A consideration on laser machining mechanism of silicon nitride and silicon carbide.

柘植明, 金山公三, 重松一典, 中村守

名古屋工業技術試験所報告 39(11) 439-443 Nov 1990

Electro-discharge machining of high performance structural ceramics.

中村守, 平井幸夫, 金山公三, 久保勝司

型技術 3(7) 130-131 Jul 1988

Machining of titanium alloy.

町田充秀, 梶原弘, 金山公三, 中村守

名古屋工業技術試験所報告 35(8) 309-315 Aug 1986

Conference Activities & Talks

Plain Text

線膨張係数の温度依存性に及ぼす樹種の影響

三木恒久、中谷留美子、関雅子、田中聡一、祖父江信夫、西田雅一、重松一典（産総研）、金山公三（京大生存研）

Mar 2015

溶液含浸木材の養生過程における細胞壁への溶質拡散に及ぼす溶媒乾燥速度の影響

田中聡一、関雅子、三木恒久、重松一典（産総研）、金山公三（京大生存研）

Mar 2015

高圧力下における熱硬化性樹脂含浸木材と金属材料の摩擦特性

関雅子、、田中聡一、三木恒久、重松一典（産総研）、金山公三（京大生存研）

Mar 2015