Tomohiko ISE

J-GLOBAL         Last updated: Aug 30, 2019 at 14:23
 
Avatar
Name
Tomohiko ISE

Research Areas

 
 

Awards & Honors

 
Sep 2015
PSP Visualization of Pressure Distribution of Externally Pressurized Gas Thrust Bearings (Experimental Validation of Variation of Pressure Distribution by Supply Pressure), ITC Tokyo 2015 Poster Award for Young Tribologists
Winner: Tomohiko Ise, Shuma Kobayashi, Kazuhiro Itoh and Toshihiko Asami
 

Published Papers

 
Shozo KAWAMURA, Sho MIYAGI, Tomohiko ISE, Masami MATSUBARA
Mechanical Engineering Journal   6(1)    Feb 2019   [Refereed]
Interfacial observation of composite rubber with fiber-shaped particles under tensile load using X-ray computer tomography
Masami MATSUBARA, 〇Shinnosuke TERAMOTO, Asahiro NAGATANI, Shozo KAWAMURA, Tomohiko ISE, Nobutaka TSUJIUCHI and Akihito ITO
Interfacial observation of composite rubber with fiber-shaped particles under tensile load using X-ray computer tomography      Nov 2018   [Refereed]
Structural Health Monitoring of Layered Structure by Strain Measurements
Shozo Kawamura, Sho Miyagi, Tomohiko Ise and Masami Matsubara
25th International Congress on Sound and Vibration (ICSV25)      Jul 2018   [Refereed]
Extraction of Structure Parts that Behave Like a Dynamic Vibration Absorber
Masami Matsubara, Koki Morikawa, Tomohiko Ise, and Shozo Kawamura
25th International Congress on Sound and Vibration (ICSV25)      Jul 2018   [Refereed]
Vibration Reduction of the Rotor by Supply Gas Pressure control of Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply
Tomohiko Ise, Takemichi Ueki, Masami Matsubara, Shozo Kawamura
25th International Congress on Sound and Vibration (ICSV25)      Jul 2018   [Refereed]
河村庄造,平原直人,伊勢智彦,松原真己
日本機械学会論文集   84(864)    2018   [Refereed]
Toshihiko Asami, Yoshito Mizukawa, Tomohiko Ise
Transactions of ASME, Journal of Vibration and Acoustics   140(6)    2018   [Refereed]
Shozo Kawamura, Tomohiko Ise, Masami Matsubara
Journal of Engineering Research and Application   8(6) 12-19   2018   [Refereed]
松原真己, 河村庄造, 伊勢智彦
日本機械学会論文集(Web)   84(860) ROMBUNNO.17‐00540(J‐STAGE)   2018
Tomohiko Ise, Mitsuyoshi Osaki, Masami Matsubara and Shozo Kawamura
17th Asian Pacific Vibration Conference      Nov 2017   [Refereed]
Analysis of Vibration Characteristics of Cantilever using Sompi Method
Tomohiko Ise, Shota Aramomi, Masami Matsubara and Shozo Kawamura
17th Asian Pacific Vibration Conference      Nov 2017   [Refereed]
Vibration Characteristics of Externally Pressurized Gas Journal Bearings with Asymmetric Gas Supply Pressure Control
Tomohiko Ise, Takemichi Ueki, Masami Matsubara and Shozo Kawamura
17th Asian Pacific Vibration Conference      Nov 2017   [Refereed]
Experimental Verification of Damping Characteristics of Hydro-inertia Gas Journal Bearings
Tomohiko Ise, Shinji Ouchi, Masami Matsubara and Shozo Kawamura
17th Asian Pacific Vibration Conference      Nov 2017   [Refereed]
Tomohiko Ise, Kohei Nagao, Masami Matsubara, Shozo Kawamura Tomoya Kinugawa and Kazuhiko Nishimura
7th International Conference on Manufacturing, Machine Design and Tribology      Apr 2017   [Refereed]
Toji Masatoshi, Asami Toshihiko, Ise Tomohiko
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 5      2017   [Refereed]
Masami Matsubara, Daiki Tajiri, Tomohiko Ise, Shozo Kawamura
Journal of Sound and Vibration   (408) 368-382   2017   [Refereed]
Masami Matsubara, Nobutaka Tsujiuchi, Tomohiko Ise, Shozo Kawamura
SAE Technical Paper      2017   [Refereed]
Reduction of shaft vibration by pressure control of externally pressurized gas journal bearings with asymmetric gas supply (Experiments of single direction control)
Tomohiko Ise, Kazuya Imanishi, Takemichi Ueki and Toshihiko Asami
Proceedings of the 23rd International Congress on Sound & Vibration      Jul 2016   [Refereed]
Shozo Kawamura, Masato Kita, Masami Matsubara and Tomohiko Ise
Mechanical Engineering Journal   3(6)    2016   [Refereed]
松原真己, 堀内慎, 伊勢智彦, 河村庄造
日本機械学会論文集(Web)   82(844) ROMBUNNO.16‐00300(J‐STAGE)   2016
松原真己, 青野晃大, 伊勢智彦, 河村庄造
日本機械学会論文集(Web)   82(837) 15‐00669(J‐STAGE)   2016
Vibration suppression of the large eccentric rotor by using externally pressurized gas journal bearings with asymmetrically arranged gas supply holes
Tomohiko ISE, Takaaki ITOGA, Kazuya IMANISHI and Toshihiko ASAMI
Proceedings of the 16th Asia Pacific Vibration Conference      Nov 2015   [Refereed]
PSP Visualization of Pressure Distribution of Externally Pressurized Gas Thrust Bearings (Experimental Validation of Variation of Pressure Distribution by Supply Pressure)
Tomohiko Ise, Shuma Kobayashi, Kazuhiro Itoh and Toshihiko Asami
Proceedings of the International Tribology Congress 2015      Sep 2015   [Refereed]
Tomohiko Ise, Naoyuki Arita, Toshihiko Asami, Iwao Kawashima, Tadashi Maeda and Takenori Nakajima
Mechanism and Machine Theory   84 57-66   2015   [Refereed]
Tomohiko Ise, Sayuri Nakano, Toshihiko Asami, Yuki Endo, Itsuro Honda
International Journal of Mechanical Engineering and Applications   3(1) 16-21   2015   [Refereed]
Tomohiko Ise, Kazuya Imanishi, Toshihiko Asami, Tomohiro Ishikawa, Naoyuki Takada, Fumiyoshi Kimura, Yoshiyuki Yamaguchi and Takahiro Tokumiya
9th IFToMM International Conference on Rotor Dynamics, IFToMM International Conference of Rotor Dynamics 2014   1289-1303   Sep 2014   [Refereed]
ISE TOMOHIKO, ARITA NAOYUKI, ASAMI TOSHIHIKO, NAKAJIMA TAKENORI, KAWASHIMA IWAO, MAEDA TADASHI
Precision Engineering   38(3) 506-511   Jul 2014
Effect of rotor speed on variation in pressure distribution in hydroinertia gas bearings
Tomohiko Ise, Sayuri Nakano, Yuki Endo, Toshihiko Asami, Fumiyoshi Kimura, Yoshiyuki Yamaguchi and Itsuro Honda
Proceedings of 4th European Conference and Exhibition on Lubrication, Maintenance and Tribotechnology   No. L144042   Jun 2014   [Refereed]
Fukui Takahiro, Asami Toshihiko, Ise Tomohiko
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE - 2013, VOL 8: SEISMIC ENGINEERING      2014   [Refereed]
Tomohiko Ise, Sayuri Nakano, Toshihiko Asami, Yuki Endo, Itsuro Honda
International Journal of Mechanical Engineering and Applications   2(4) 52-57   2014   [Refereed]
Tomohiko Ise, Takaaki Itoga, Toshihiko Asami, Kazuya Imanishi, Fumiyoshi Kimura and Yoshiyuki Yamaguchi
Mechanik   87 99-104   Sep 2014   [Refereed]
ISE TOMOHIKO, IMANISHI KAZUYA, ASAMI TOSHIHIKO, TOKUMIYA TAKAHIRO, TAKADA NAOYUKI, KIMURA FUMIYOSHI, YAMAGUCHI YOSHIYUKI
J Adv Mech Des Syst Manuf (Web)   8(3) JAMDSM0029-JAMDSM0029 (J-STAGE)   2014
ASAMI TOSHIHIKO, YOKOTA YASUTAKA, ISE TOMOHIKO, HONDA ITSURO, SAKAMOTO HIROYA
Trans ASME J Vib Acoust   135(5) 051029.1-051029.9   Oct 2013
Experimental verification of influence of the slot restrictor shape for the gas bearing characteristics
Tomohiko Ise, Akira Inoue, Toshihiko Asami, Fumiyoshi Kimura and Yoshiyuki Yamaguchi
Proceedings of World Tribology Congress 2013   No.1009   Sep 2013   [Refereed]
Numerical Analysis of Hydroinertia Gas Bearing with Inclined Supply Feed Holes for High Speed Rotary Machines
Tomohiko Ise, Sayuri Nakano, Yuki Endo, Toshihiko Asami, Fumiyoshi Kimura, Yoshiyuki Yamaguchi and Itsuro Honda
Proceedings of World Tribology Congress 2013   No.1015   Sep 2013   [Refereed]
ASAMI TOSHIHIKO, YOKOTA YASUTAKA, ISE TOMOHIKO, HONDA ITSURO, SAKAMOTO HIROYA
Trans ASME J Vib Acoust   135(1) 011012.1-011012.8   Feb 2013
An Approximate Formula to Calculate the Restoring and Damping Forces of an Air Spring with a Small Pipe
Tomohiko ISE
ASME 2012 Pressure Vessels and Piping Conference   PVP2012-78481   Jul 2012   [Refereed]
ASAMI Toshihiko
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   78(794) 3413-3424   2012
This paper proposes a simple expression for calculating the restoring and the damping forces of an air spring equipped with an elongated tube as the orifice. Air springs are commonly used in railway vehicles, automobiles, and various vibration iso...
ISE TOMOHIKO, MIYATAKE HIROSHI, ASAMI TOSHIHIKO
J Adv Mech Des Syst Manuf (Web)   6(1) 149-157 (J-STAGE)   2012
ASAMI Toshihiko, YOKOTA Yasutaka, ISE Tomohiko, HONDA Itsuro, SAKAMOTO Hiroya
TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A   77(777) 1674-1685   2011
This paper proposes a simple but accurate method for calculating the dynamic properties of an air spring employing an orifice to produce a damping force. Air springs are very common in rail, automobile, and vibration isolation applications. Howeve...
ISE TOMOHIKO, ONOE SATOSHI, ASAMI TOSHIHIKO, KAWASHIMA IWAO, MAEDA TADASHI
J Power Energy Syst (Web)   5(3) 406-413 (J-STAGE)   2011
Tomohiko ISE, Takao TORII, Nobuyoshi MORITA, Shinichi TOGO, Takahiro KUNITOMO and Makoto OKANO
Active Geophysical Monitoring   40 193-209   2010   [Refereed]
ISE TOMOHIKO, TORII TAKAO, MORITA NOBUYOSHI, TOGO SHINICHI, OKANO MAKOTO
J Adv Mech Des Syst Manuf (Web)   1(1) 93-101 (J-STAGE)   2007
ISE TOMOHIKO, TORII TAKAO, MORITA NOBUYOSHI, TOGO SHINICHI, OKANO MAKOTO
J Adv Mech Des Syst Manuf (Web)   1(5) 681-689 (J-STAGE)   2007
Tomohiko Ise, Masaya Nakatsuka, Kohei Nagao, Masami Matsubara,Shozo Kawamura, Toshihiko Asami, Tomoya Kinugawa, Kazuhiko Nishimura
Precision Engineering   50 286-292   May 2017   [Refereed]
Tomohiko Ise, Mitsuyoshi Osaki, Masami Matsubara, Shozo Kawamura
Transactions of ASME, Journal of Tribology   141(3)    Nov 2018   [Refereed]

Misc

 
ISE Tomohiko, OSAKI Mitsuyoshi, MATSUBARA Masami, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2018(0)    2018
MATSUBARA Masami, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2018(0)    2018
MATSUBARA Masami, MORIKAWA Koki, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2018(0)    2018
KAWAMURA Shozo, MIYAGI Sho, ISE Tomohiko, MATSUBARA Masami
The Proceedings of Conference of Tokai Branch   2017(0)    2017
ISE Tomohiko, OSAKI Mitsuyoshi, KAWAMURA Shozo, MATSUBARA Masami
The Proceedings of Conference of Tokai Branch   2017(0)    2017
ISE Tomohiko, UEKI Takemichi, MATSUBARA Masami, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2017(0)    2017
ISE Tomohiko, NISHIDA Masaki, KAWAMURA Shozo, MATSUBARA Masami
The Proceedings of Conference of Tokai Branch   2017(0)    2017
MATSUBARA Masami, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2017(0)    2017
TOJI Masatoshi, ASAMI Toshihiko, Honda Itsuro, Ise Tomohiko
The Proceedings of Conference of Kansai Branch   2017(0)    2017
ONISHI Kento, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro
The Proceedings of Conference of Kansai Branch   2017(0)    2017
寺前 佳祐, 伊勢 智彦, 浅見 敏彦, 本田 逸郎
The Proceedings of Conference of Kansai Branch   2017(0)    2017
NAKATSUKA Masaya, ISE Tomohiko, NAGAO Kohei, ASAMI Toshihiko, KINUGAWA Tomoya, NISHIMURA Kazuhiko
The Proceedings of Conference of Kansai Branch   2017(0)    2017
KAWAMURA Shozo, MORI Hiroki, YUKAWA Harutoshi, NAKASHIMA Kenji, ISE Tomohiko, MATSUBARA Masami
SHD   2017(0) C-34   2017
<p>In this study, an inverse dynamics analysis method considering swing leg motion was constructed only by using some wireless motion sensors.(WMS) First, it was confirmed that the acceleration data by the WMS agreed well with the one by the 3-dim...
KAWAMURA Shozo, SATO Kosei, AOYAMA Shinsuke, YUKAWA Harutoshi, ISE Tomohiko, MATSUBARA Masami
SHD   2017(0) A-16   2017
<p>In this study, we evaluated the running motion and the physical characteristics of body under the various floor condition. We measured, firstly, the running motion under three floor conditions, i.e., the rigid floor, one mat on the floor and tw...
KAWAMURA Shozo, MIYAGI Sho, ISE Tomohiko, MATSUBARA Masami
DD   2017(0)    2017
Structural Health Monitoring (SHM) is a very important technology to realize the sustainable society. Various researches are being conducted for SHM, and it is effective because it avoids accidents and predicts behavior of structures. In this rese...
KAWAMURA Shozo, HIRABARA Naoto, ISE Tomohiko, MATSUBARA Masami
DD   2017(0)    2017
The identification of external force acting on a machine or a structure is important for diagnosis. One of the force identification methods is based on the frequency response function (FRF). The method is very useful although it requires the infor...
ISE Tomohiko, OUCHI Shinji, MATSUBARA Masami, KAWAMURA Shozo
DD   2017(0)    2017
The solid NMR (nuclear magnetic resonance) device can obtain high resolution as the hollow sample tube is rotated at ultra-high speed. The rotational speed exceeds over 4 million rpm. Hydro-inertia gas bearing is used in this device to support the...
ISE Tomohiko, ARAMOMI Shota, MATSUBARA Masami, KAWAMURA Shozo
DD   2017(0)    2017
The Sompi method has been used to a spectral analysis method applied in the geoscience field and the analysis of volcanic earthquakes. By applying the acquired complex vibration data to the autoregressive process, it can be decomposed into wave co...
MATSUBARA Masami, NAGATANI Asahiro, YAMADA Rikako, HAMAGUCHI Kazuya, ISE Tomohiko, KAWAMURA Shozo, TSUJIUCHI Nobutaka, ITO Akihito
DD   2017(0)    2017
Damping material is used to provide structures and machines with damping characteristics. Damping material is applied to part of the product in order to reduce noise and vibration. The improvement of damping properties is important and viscoelasti...
KAWAMURA Shozo, NOMURA Koichi, ISE Tomohiko, MATSUBARA Masami
DD   2017(0)    2017
At present, there are many types of isolation system, but many of them are designed for the short-period ground motion. And the long-period ground motion has recently attracted the attention, but the isolation system for the shortperiod ground mot...
Ise Tomohiko, Ueki Takemichi, Matsubara Masami, Kawamura Shozo
DD   2017(0)    2017
Hydrostatic gas journal bearings can contactlessly support rotors by gas pressure. They provide advantages such as high precision rotation, high speed rotation and low friction loss. However, the load capacity of gas bearings is very small in comp...
ISE Tomohiko, NISHIDA Masaki, MATSUBARA Masami, KAWAMURA Shozo
DD   2017(0)    2017
Gas bearing is a mechanical element using gas as a lubricant, it has high rotational accuracy and low friction. However, gas bearing has a fault of small load capacity. If this bearing overcome it, practical range of this bearing will more spread....
ASANO Tsuyoshi, NAKAMURA Kouki, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro
DD   2017(0)    2017
The purpose of the present study is to clarify the fluid flow of an oil damper through numerical analysis in order to estimate the exact damping coefficient of an oil damper. The finite difference method was used to solve the governing equation of...
Baba Yuichi, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro
DD   2017(0)    2017
Desktop vibration isolators are often used as a platform for precision measuring instruments. This article discusses the accuracy of performance prediction methods for vibration isolators elastically supported by four air springs. Each air spring ...
伊勢智彦, 大崎光祥, 松原真己, 河村庄造
日本ばね学会ばね及び復元力応用講演会講演論文集   2016 9‐12-12   Nov 2016
田尻大樹, 松原真己, 伊勢智彦, 河村庄造
自動車技術会大会学術講演会講演予稿集(CD-ROM)   2016 ROMBUNNO.416   May 2016
KAWAMURA Shozo, MORI Hiroki, YUKAWA Harutoshi, NAKASHIMA Kenji, ISE Tomohiko, MATSUBARA Masami
SHD   2016(0) A-15   2016
<p>In this study, an inverse dynamics analysis method was constructed only by using some wireless motion sensors.(WMS) First, it was confirmed that the acceleration data by the WMS agreed well with the one by the 3-dimensional motion analysis syst...
NAKATSUKA Masaya, ISE Tomohiko, ASAMI Toshihiko, NISHIMURA Kazuhiko, KINUGAWA Tomoya
The Proceedings of the Machine Design and Tribology Division meeting in JSME   2016(0) C3-2   2016
<p>Externally pressurized gas journal bearings with slot restrictors can support large load compared with other types of gas restrictors such as inherent orifices. The authors proposed a new type of externally pressurized gas journal bearing, whic...
TERAMAE Keisuke, ISE Tomohiko, ASAMI Toshihiko, HONDA Isturo
The Proceedings of the Machine Design and Tribology Division meeting in JSME   2016(0) C3-3   2016
<p>Hydroinertia gas journal bearings have been used for ultra high-speed rotational machines such as those used in solid state nuclear magnetic resonance (NMR) devices. This type of bearing has inherent orifice restrictors and a large radial clear...
Kawamura Shozo, Kita Masato, Ise Tomohiko, Matsubara Masami
The Proceedings of the Symposium on Evaluation and Diagnosis   2016(0)    2016
KAWAMURA Shozo, HIRABARA Naoto, ISE Tomohiko, MATSUBARA Masami
DD   2016(0)    2016
<p>The identification of external force acting on a machine or a structure is important for diagnosis. One of the force identification methods is based on the frequency response function (FRF). The method is very useful although it requires the in...
Onishi Kento, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro
DD   2016(0)    2016
<p>The vibration isolator discussed in this study consists of two rectangular plates with four air springs inserted between them. Each air spring has a main tank and reservoir tank connected by a small diameter pipe. Because this structure has wee...
Toji Masatoshi, Asami Toshihiko, Honda Itsuro, Ise Tomohiko
DD   2016(0)    2016
<p>This paper deals with the numerical analysis of an air spring that consists of two tanks connected by a long pipe. Two resonance points may appear in the frequency response of a vibratory system supported by this type of air spring despite the ...
ISE Tomohiko, UEKI Takemichi, MATSUBARA Masami, KAWAMURA Shozo
DD   2016(0)    2016
<p>Hydrostatic gas journal bearings can contactlessly support rotors by gas pressure. They provide advantages such as high precision rotation, high speed rotation and low friction loss. However, the load capacity of gas bearings is very small in c...
Fukunaga Masataka, Ise Tomohiko, Asami Toshihiko, Hirata Akihisa, Kinugawa Tomoya
The Proceedings of Conference of Tokai Branch   2016(0) _629-1_-_629-2_   2016
MATSUBARA Masami, HORIUCHI Makoto, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2016(0) _617-1_-_617-2_   2016
MATSUBARA Masami, AONO Akihiro, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2016(0) _616-1_-_616-2_   2016
MATSUBARA Masami, AONO Akihiro, ISE Tomohiko, KAWAMURA Shozo
The Proceedings of Conference of Tokai Branch   2016(0) _615-1_-_615-2_   2016
KAWAMURA Shozo, HIRABARA Naoto, ISE Tomohiko, MATSUBARA Masami
The Proceedings of Conference of Tokai Branch   2016(0) _614-1_-_614-2_   2016
IMANISHI Kazuya, UEKI Takemichi, ARAKI Nozomu, ASAMI Toshihiko, ISE Tomohiko
The Proceedings of Conference of Tokai Branch   2016(0) _602-1_-_602-2_   2016
Toji Masatoshi, Asami Toshihiko, Honda Itsuro, Ise Tomohiko
The Proceedings of Conference of Tokai Branch   2016(0) _601-1_-_601-2_   2016
Kobayashi Shuma, Ise Tomohiko, Itoh Kazuhiro, Asami Toshihiko
The Proceedings of Conference of Tokai Branch   2016(0) _213-1_-_213-2_   2016
Nakatsuka Masaya, Ise Tomohiko, Asami Toshihiko, Nishimura Kazuhiko, Kinugawa Tomoya
The Proceedings of Conference of Tokai Branch   2016(0) _208-1_-_208-2_   2016
Teramae Keisuke, Ise Tomohiko, Asami Toshihiko
The Proceedings of Conference of Tokai Branch   2016(0) _207-1_-_207-2_   2016
伊勢智彦, 浅見敏彦
日本機械学会年次大会講演論文集(CD-ROM)   2015 ROMBUNNO.J1030201   Sep 2015
伊勢智彦, 今村信昭, 吾郷健二, 前田正, 中西敏, 藤本豊久
日本機械学会ロボティクス・メカトロニクス講演会講演論文集(CD-ROM)   2015 ROMBUNNO.1A1‐A02   May 2015
今西和也, 伊勢智彦, 浅見敏彦, 徳宮孝弘, 高田直幸
日本機械学会関西支部定時総会講演会講演論文集   90th 440   Mar 2015
福永昌恭, 浅見敏彦, 伊勢智彦, 平田明久, 絹川智哉
日本機械学会関西支部定時総会講演会講演論文集   90th 452   Mar 2015
黒川祐明, 伊勢智彦, 浅見敏彦
日本機械学会関西支部定時総会講演会講演論文集   90th 446   Mar 2015
井上暁良, 伊勢智彦, 西村一彦, 浅見敏彦
日本機械学会関西支部定時総会講演会講演論文集   90th 408   Mar 2015
KOBAYASHI SHUUMA, ISE TOMOHIKO, ITO KAZUHIRO, ASAMI TOSHIHIKO
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM)   2015 ROMBUNNO.PB9   2015
TERAMAE KEISUKE, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM)   2015 ROMBUNNO.PB2   2015
IMANISHI KAZUYA, ISE TOMOHIKO, ASAMI TOSHIHIKO, TOKUMIYA TAKAHIRO, TAKADA NAOYUKI
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM)   2015 ROMBUNNO.PA25   2015
KUROKAWA HIROMITSU, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本トライボロジー学会トライボロジー会議予稿集(CD-ROM)   2015 ROMBUNNO.PB3   2015
ISE Tomohiko, IMAMURA Nobuaki, AGO Kenji, MAEDA Tadashi, NAKANISHI Satoshi, FUJIMOTO Toyohisa
Robomech   2015(0) _1A1-A02_1-_1A1-A02_2   2015
This paper proposes reduction device by using fluid film lubrication type wave generator for robot and mechatronics etc. This reduction device can be achieved simple parts configuration compared with conventional type. Experimental setup was made ...
ISE Tomohiko, ASAMI Toshihiko
The Proceedings of Mechanical Engineering Congress, Japan   2015(0) _J1030201--_J1030201-   2015
An externally pressurized gas journal bearing with an asymmetric gas supply mechanism has been developed. This type of bearing has a large load capacity compared with the conventional symmetric gas supply bearing because pressurized gases are supp...
KOBAYASHI Shuma, ISE Tomohiko, ITOH Kazuhiro, ASAMI Toshihiko
The Proceedings of the Fluids engineering conference   2015(0) _1008-1_-_1008-2_   2015
This paper describes visualization and measurements of pressure distribution by using Pressure-Sensitive Paint (PSP) for externally pressurized thrust gas bearing. The test bearing diameter is 30 mm. Numerical calculation of pressure distribution ...
FUKUNAGA Masataka, ASAMI Toshihiko, ISE Tomohiko, HIRATA Akihisa, Kinugawa Tomoya
The Proceedings of Conference of Kansai Branch   2015(0)    2015
KUROKAWA Hiromitsu, ISE Tomohiko, ASAMI Toshihiko
The Proceedings of Conference of Kansai Branch   2015(0)    2015
IMANISI Kazuya, ISE Tomohiko, ASAMI Tosihiko, TOKUMIYA Takahiro, Takada Naoyuki
The Proceedings of Conference of Kansai Branch   2015(0)    2015
KOBAYASHI Shuma, ISE Tomohiko, ITOH Kazuhiro, ASAMI Tosihiko
The Proceedings of Conference of Kansai Branch   2015(0)    2015
井上 暁良, 伊勢 智彦, 西村 一彦, 浅見 敏彦
The Proceedings of Conference of Kansai Branch   2015(0)    2015
ASAMI TOSHIHIKO, TOJI MASATOSHI, ISE TOMOHIKO, HONDA ITSURO
日本ばね学会ばね及び復元力応用講演会講演論文集   2014 25-28   Nov 2014
FUKUNAGA Masataka, ASAMI Toshihiko, ISE Tomohiko
Dynamics and Design Conference : D & D   2014 "403-1"-"403-12"   Aug 2014
We examined the efficacy of the fractional derivative Voigt model and the GHM model, which are dynamic models of viscoelastic materials. As a viscoelastic model, a classical model that combines the damping element (dashpot) and the spring element ...
ITOGA TAKAAKI, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   89th 4.16   Mar 2014
NAKAMURA YUSUKE, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   89th 5.3   Mar 2014
INOUE AKIYOSHI, ISE TOMOHIKO, NISHIMURA KAZUHIKO, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   89th 4.15   Mar 2014
NAKANO SAYURI, ISE TOMOHIKO, ENDO YUKI, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   89th 4.17   Mar 2014
FUKUI TAKAHIRO, ASAMI TOSHIHIKO, ISE TOMOHIKO
日本機械学会関西支部定時総会講演会講演論文集   89th 5.2   Mar 2014
OKURA MASAHITO, ASAMI TOSHIHIKO, ISE TOMOHIKO, HONDA ITSURO, SAKAMOTO HIROYA
日本機械学会関西支部定時総会講演会講演論文集   89th 5.1   Mar 2014
FUKUNAGA MASATAKA, ASAMI TOSHIHIKO, ISE TOMOHIKO
Dyn Des Conf (CD-ROM)   2014 ROMBUNNO.403   2014
伊勢 智彦
トライボロジスト   59(1) 42-45   2014
ISE Tomohiko
JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS   59(1) 42-45   2014
NAKAMURA Yusuke, ISE Tomohiko, ASAMI Toshihiko
The Proceedings of Conference of Kansai Branch   2014(0) _5-3_   2014
FUKUI Takahiro, ASAMI Toshihiko, ISE Tomohiko
The Proceedings of Conference of Kansai Branch   2014(0) _5-2_   2014
OHKURA Masahito, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro, SAKAMOTO Hiroya
The Proceedings of Conference of Kansai Branch   2014(0) _5-1_   2014
ITOGA Takaaki, ISE Tomohiko, ASAMI Toshihiko
The Proceedings of Conference of Kansai Branch   2014(0) _4-16_   2014
NAKANO Sayuri, ISE Tomohiko, ENDO Yuki, ASAMI Toshihiko
The Proceedings of Conference of Kansai Branch   2014(0) _4-17_   2014
井上 暁良, 伊勢 智彦, 西村 一彦, 浅見 敏彦
The Proceedings of Conference of Kansai Branch   2014(0) _4-15_   2014
IMANISHI Kazuya, ISE Tomohiko, ASAMI Toshihiko, TOKUMIYA Takahiro, TAKADA Naoyuki
The Proceedings of the Machine Design and Tribology Division meeting in JSME   2014(0) 165-166   2014
Externally pressurized gas journal bearings with an asymmetric gas supply mechanism have a large load capacity compared with conventional symmetric gas supply bearings. We propose that the bearing is applicable for use in an X-ray CT gantry. The a...
中野 紗百合, 伊勢 智彦, 遠藤 由宇生
フルードパワーシステム講演会講演論文集   2013 19-21   Nov 2013
ISE TOMOHIKO, KAWASHIMA IWAO
日本セラミックス協会秋季シンポジウム講演予稿集(CD-ROM)   26th ROMBUNNO.2Q26   Aug 2013
OKURA Masahito, ASAMI Toshihiko, ISE Tomohiko, HONDA Itsuro, SAKAMOTO Hiroya
Dynamics and Design Conference : D & D   2013 "242-1"-"242-9"   Aug 2013
Today, the air springs are widely used as the vibration isolators for the cars, railway vehicle, and anti-vibration tables, etc. Many air springs have two air tanks called the main tank and reservoir tank. The air tanks are usually connected by an...
NAKAMURA Yusuke, ISE Tomohiko, ASAMI Toshihiko
Dynamics and Design Conference : D & D   2013 "241-1"-"241-7"   Aug 2013
This study proposes a health monitoring for a structure using the accurately controlled elastic waves. As a basic test in this paper, the vibration mode of the frame structure was compared with both impulse response and the accurately controlled e...
Fukui Takahiro, Asami Toshihiko, Ise Tomohiko
Dynamics and Design Conference : D & D   2013 "105-1"-"105-8"   Aug 2013
In this paper, we propose a method for analyzing the vibration properties of contact wires of trains by the Transfer Matrix Method (TMM), regarding them as a periodic structure. When the train speed rises, self-excitation vibration of the wires be...
ENDO YUKI, HIKICHI KOSUKE, ISE TOMOHIKO, TOGO SHIN'ICHI
ターボ機械   41(5) 286-292   May 2013
ENDO Yuki, HIKICHI Kosuke, ISE Tomohiko, TOGO Shinichi
ターボ機械   41(5) 286-292   May 2013
OKURA MASAHITO, ASAMI TOSHIHIKO, ISE TOMOHIKO, HONDA ITSURO, SAKAMOTO HIROYA
日本機械学会関西支部定時総会講演会講演論文集   88th 7.23   Mar 2013
ITOGA TAKAAKI, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   88th 8.24   Mar 2013
FUKUI TAKAHIRO, ASAMI TOSHIHIKO, ISE TOMOHIKO
日本機械学会関西支部定時総会講演会講演論文集   88th 7.21   Mar 2013
NAKANO SAYURI, ISE TOMOHIKO, ENDO YUKI, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   88th 8.26   Mar 2013
ARITA NAOYUKI, ISE TOMOHIKO, ASAMI TOSHIHIKO, MAEDA TADASHI
日本機械学会関西支部定時総会講演会講演論文集   88th 8.25   Mar 2013
NAKAMURA YUSUKE, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本機械学会関西支部定時総会講演会講演論文集   88th 7.9   Mar 2013
NAKAMURA YUSUKE, ISE TOMOHIKO, ASAMI TOSHIHIKO
Dyn Des Conf (CD-ROM)   2013 ROMBUNNO.241   2013
ITOGA TAKAAKI, ISE TOMOHIKO, ASAMI TOSHIHIKO
日本機械学会運動と振動の制御シンポジウム講演論文集   13th(CD-ROM) ROMBUNNO.C29   2013
FUKUI TAKAHIRO, ASAMI TOSHIHIKO, ISE TOMOHIKO
Dyn Des Conf (CD-ROM)   2013 ROMBUNNO.105   2013
OKURA MASAHITO, ASAMI TOSHIHIKO, ISE TOMOHIKO, HONDA ITSURO, SAKAMOTO HIROYA
Dyn Des Conf (CD-ROM)   2013 ROMBUNNO.242   2013
NAKANO SAYURI, ISE TOMOHIKO, ENDO YUKI, ASAMI TOSHIHIKO, HONDA ITSURO
日本機械学会運動と振動の制御シンポジウム講演論文集   13th(CD-ROM) ROMBUNNO.C30   2013
NAKANO Sayuri, ISE Tomohiko, ENDO Yuki, ASAMI Toshihiko, HONDA Itsuro
MoViC   2013(0) _C30-1_-_C30-6_   2013
This paper describes a hydroinertia gas bearing with inclined feed holes, which may achieve higher speed of operation than conventional model. Our purpose is increasing to the maximum rotational speed by inclining feed holes. This study analyzes i...
ITOGA Takaaki, ISE Tomohiko, ASAMI Toshihiko
MoViC   2013(0) _C29-1_-_C29-6_   2013
Rotating machineries have problems at bearings to support a rotor such as seismic ACROSS (Accurately Controlled Routinely Operated Signal System) transmitters. The rotor is supported by rolling contact bearings. The bearings in the transmitters, l...

Books etc

 
気体軸受技術 -設計・製作と運転のテクニック-
Jun 2014