Shinji Hashimura

Profile Information

Affiliation: 教授, 機械機能工学科, 芝浦工業大学

Degree: Master of Engineering(Kyushu University)

J-GLOBAL ID: 200901020898534358
researchmap Member ID: 1000208056

Research Interests

Research Areas

Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine elements and tribology /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Design engineering /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine materials and mechanics /

Research History

Apr, 2018 - Present

Professor, Faculty of Engineering, Engineering Science and Mechanics, Shibaura Institute of Technology
Apr, 2013 - Mar, 2018

Associate Professor, Faculty of Engineering, Engineering Science and Mechanics, Shibaura Institute of Technology
Sep, 2005 - Mar, 2013

Associate professor, Department of Mechanical Engineering, Kurume National College of Technology
Apr, 1999 - Sep, 2005

Lecturer, Department of Mechanical Engineering, Kurume National College of Technology
Apr, 1996 - Mar, 1999

Assistant professor, Department of Mechanical Engineering, Kurume National College of Technology

Education

Apr, 1992 - Mar, 1994

Kyushu University
Apr, 1990 - Mar, 1992

Energy engineering course, Faculty of Engineering, Toyohashi University of Technology

Committee Memberships

Mar, 2024 - Present

日本機械学会論文集，Mechanical Engineering Journal, Mechanical Engineering Letter編集委員, 一般社団法人日本機械学会
Jun, 2022 - Present

大型車の車輪脱落事故防止対策に係る調査・分析検討会委員, 国土交通省自動車局
Jun, 2020 - Present

監事, 一般社団法人日本ねじ研究協会
2015 - Present

JIS原案作成委員会委員, 日本ねじ研究協会
2014 - Present

出版委員会委員, 日本ねじ研究協会
2006 - Present

機素潤滑設計部門機械要素１技術企画委員会委員, 日本機械学会
Dec, 2021 - Nov, 2023

日本産業標準調査会臨時委員, 経済産業省
Feb, 2023

Fellow, The Japan Society of Mechanical Engineers
Apr, 2021 - Mar, 2022

第28期商議員, 日本機械学会関東支部
2017 - 2019

機素潤滑設計部門機械要素１技術企画委員会委員長, 日本機械学会
2017 - 2018

機素潤滑設計部門運営委員会委員, 日本機械学会
2015 - 2018

ねじ用語辞典委員会・委員, 日本ねじ研究協会
2016 - 2017

機素潤滑設計部門機械要素１技術企画委員会副委員長, 日本機械学会
2013 - 2015

機素潤滑設計部門広報委員会委員長, 日本機械学会
2013 - 2014

第14回機素潤滑設計部門講演会（MDT2014）実行委員, 日本機械学会
2011 - 2013

機素潤滑設計部門広報委員会副委員長, 日本機械学会
Apr, 2008 - Mar, 2010

日本機械学会機素潤滑設計部門機械要素１技術企画委員会幹事
2008 - 2010

機素潤滑設計部門機械要素１技術企画委員会幹事, 日本機械学会
2006 - 2008

九州支部商議員, 日本機械学会

Awards

Aug, 2021

The Technological Contribution Award, Japan Society of Automotive Engineers

Shinji Hashimura
2015

宮地杭一記念賞, 芝浦工業大学

橋村真治
2015

武藤栄次賞 Valuable Publishing賞, 日本設計工学会

橋村真治
2012

業績賞, 日本工学教育協会

橋村真治,藤田雅俊
2012

九州工学教育協会賞, 九州工学教育

橋村真治,藤田雅俊
2011

機素潤滑設計部門優秀講演賞, 日本機械学会

橋村真治
2009

理事長奨励賞, 独立行政法人国立高等専門学校機構

橋村真治

Papers

Influences of various parameters on shear stiffness of bolted joints subjected to shear load

Ayaka Murai, Tadatoshi Watanabe, Masahiro Fukuda, Shinji Hashimura

The International Journal of Advanced Manufacturing Technology, 127(11-12) 5139-5154, Jul 6, 2023 Peer-reviewed
Relationship between Material Strength and Friction Coefficients for Aluminum Alloy Bolt

Shinji Hashimura, Kenta Horinouchi, Kazuki Kamibeppu

SAE International, Apr 11, 2023 Peer-reviewed
Fabrication of Composite of Al-Si-Cu Alloy Foam Core Surrounded by Pure Aluminum Foam and Its Compression Properties

Takao Utsunomiya, Yoshihiko Hangai, Kenji Amagai, Sinji Hashimura

Journal of Materials Engineering and Performance, 32(23) 10582-10590, Feb 13, 2023 Peer-reviewed
Influence of Configuration Error in Bolted Joints on Detection Error of Clamp Force Detection Method

Shinji Hashimura, Hisanori Sakai, Kai Kubota, Nozomi Ohmi, Takefumi Otsu, Kyoichi Komatsu

International Journal of Automation Technology, 15(4) 396-403, Jul 5, 2021 Peer-reviewedLead authorCorresponding author
Loosening Detection of a Bolted Joint Based on Monitoring Dynamic Characteristics in the Ultrasonic Frequency Region

Takanori Niikura, Naoki Hosoya, Shinji Hashimura, Itsuro Kajiwara, Francesco Giorgio-Serchi

Vibration Engineering for a Sustainable Future, 191-196, 2021 Peer-reviewed
Autonomous oil flow generated by self-oscillating polymer gels

Kyosuke Yoshimura, Yuji Otsuka, Zebing Mao, Vito Cacucciolo, Takashi Okutaki, Hideto Yamagishi, Shinji Hashimura, Naoki Hosoya, Tasuku Sato, Yoko Yamanishi …

Scientific Reports, 10(1), Dec, 2020 Peer-reviewed
A study of high-speed joining method using spiral nails

Hiroto Morodomi, Yuma Nishihara, Shota Matsubara, Shinji Hashimura, Hisashi Hori

Journal of Manufacturing Processes, 59 500-508, Nov, 2020 Peer-reviewedCorresponding author
Discussion on shear properties and flow model in screw tightening lubricant PIB under low sliding speed conditions

Takefumi Otsu, Kyoichi Komatsu, Shinji Hashimura

Tribology International, 151, Nov, 2020 Peer-reviewed
Axial force measurement of the bolt/nut assemblies based on the bending mode shape frequency of the protruding thread part using ultrasonic modal analysis

Naoki Hosoya, Takanori Niikura, Shinji Hashimura, Itsuro Kajiwara, Francesco Giorgio-Serchi

Measurement: Journal of the International Measurement Confederation, 162, Oct 1, 2020 Peer-reviewed
Robustness of polyisobutylene for friction coefficients between bearing surfaces of bolted joints

Shinji Hashimura, Toshiumi Miki, Takefumi Otsu, Kyoichi Komatsu, Shota Inoue, Shuhei Yamashita, Yuya Omiya

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology Proceedings of the Institution of Mechanical Engineers, Part, 234(1) 50-62, Jun 8, 2019 Peer-reviewedLead authorCorresponding author
Effect of surface roughness on film formation properties of screw tightening lubricant PIB

Takefumi Otsu, Kyoichi Komatsu, Shinji Hashimura

Tribology International, 136 1-22, Mar 14, 2019 Peer-reviewed
Effects of Clamp Force on Fatigue Strength of Aluminum Alloy Bolts

Shinji Hashimura, Kazuki Kamibeppu, Tomohiro Nutahara, Kenji Fukuda, Yukio Miyashita

Procedia Structural Integrity, 19 204-213, 2019 Peer-reviewedLead authorCorresponding author
Evaluation of the Clamping Force of Bolted Joints Using Local Mode Characteristics of a Bolt Head

Naoki Hosoya, Takahiko Hosokawa, Itsuro Kajiwara, Shinji Hashimura, Feblil Huda

Journal of Nondestructive Evaluation, 37(75) 1-8, Oct 9, 2018 Peer-reviewed
An Influence of Tightening Torque Stored in Tightening Process on Fatigue Strength of Aluminum Bolts

Shinji Hashimura, Tomohiro Nutahara, Kazuki Kamibeppu

Key Engineering Materials, 774 229-234, Aug 1, 2018 Peer-reviewedLead authorCorresponding author
Shear properties under the starved condition of polyisobutylene lubricant for use in screw tightening-effect of operating condition on lubrication properties

Takefumi Otsu, Kyoichi Komatsu, Shinji Hashimura, Keiji Imado

Tribology International, 122 133-142, Jun 1, 2018 Peer-reviewed
Film formation and shear properties in screw tightening lubricant PIB under oil starvation condition

Takafumi Otsu, Kyoichi Komatsu, Shinji Hashimura, Keiji Imado

日本機械学会論文集, 83(855) 1-12, Nov 1, 2017 Peer-reviewed
Influences of lubricants and bearing surface configuration under bolt head on selfloosening of bolted joints

Shinji Hashimura, Kyoichi Komatsu, Takefumi Otsu, Yujiro Sekido

Tribologists, 62(3) 205-216, Mar 1, 2017 Peer-reviewedLead authorCorresponding author
Influences of Squareness Error at Bolt Bearing Surface on a Frictional Coefficient between Bearing Surfaces and on Tightening Accuracy

Shinji HASHIMURA, Hayato ITO, Kyoichi KOMATSU, Takefumi OTSU

Tribologists, 61(12) 882-892, Dec 1, 2016 Peer-reviewedLead authorCorresponding author
Study on Tribological Properties of Polyisobutylene Lubricant for Use in Screw Tightening

Takefumi OTSU, Kyoichi KOMATSU, Shinji HASHIMURA

Tribologists, 61(12) 866-873, Dec 1, 2016 Peer-reviewed
Easy set-up and in situ automatic gear diagnostic system using only laser reflection

Eiichirou Tanaka, Keyaki Nakajima, Kazunari Okabe, Hitoshi Takebe, Kazuteru Nagamura, Kiyotaka Ikejo, Shinji Hashimura, Keiichi Muramatsu, Keiichi Watanuki, Ryozo Nemoto

JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, 10(4) 1-15, 2016 Peer-reviewed

Misc.

101

Considerations in Design of Threaded Fasteners

PLANT ENGINEER, 55(5) 2-8, Apr 27, 2023 Invited
Direct Control and Measurement of Clamp Force for Bolted Joint

Shinji Hashimura

Journal of Society of Automotive Engineers of Japan, 76 64-71, Apr, 2022 Invited
Fatigue Design Method for Threaded Fasteners

Shinji Hashimura

Journal of Japan Society for Design Engineering, 57(3) 111-117, Mar, 2022 Invited
ねじ締結体における締付け軸力

Machine Design, 65(6) 8-11, May, 2021 Invited
ねじ締結体の締付け軸力の直接管理法

Machine Design, 65(6) 12-18, May, 2021 Invited
Tribology in Tightening of Threaded Fasteners

Shinji Hashimura

Journal of Japanese Society of Tribologists, 66(4) 307-313, Apr 15, 2021 Invited
Robustness of Polyisobutylene for Friction Coefficients between bearing surfaces of Bolted Joints

Shinji Hashimura

Journal of Japan Research Institute for Screw Threads and Fasteners, 50(12) 349-363, Dec, 2019 Invited
非鉄金属製ボルトの引張強度と締付け強度

橋村真治

機械の研究, 68(8) 648-655, Aug, 2016 Invited
DEVELOPMENT OF THE EASY SET-UP AND IN SITU AUTOMATIC GEAR DIAGNOSTIC SYSTEM USING A LASER BEAM

Keyaki Nakajima, Eiichirou Tanaka, Kazunari Okabe, Hitoshi Takebe, Kazuteru Nagamura, Kiyotaka Ikejo, Shinji Hashimura, Keiichi Muramatsu, Keiichi Watanuki, Ryozo Nemoto

INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 10, 2016
619 Study on tribological performance of lubricant for screw tightening

OTSU Takefumi, KOMATSU Kyoichi, HASHIMURA Shinji

Materials and processing conference, 2015(23) "619-1"-"619-5", Nov 14, 2015
620 Influence of bearing surface configurations under bolt head and lubricants on self-loosening characteristics of bolted joints under transverse vibration

HASHIMURA Shinji, KOMATSU Kyoichi, OTSU Takefumi, ITO Hayato

Materials and processing conference, 2015(23) "620-1"-"620-3", Nov 14, 2015
621 Influence of grip length in Bolted Joint on Fatigue morphology under Transverse Vibration

MAEKAWA Junpei, HASHIMURA Shinji

Materials and processing conference, 2015(23) "621-1"-"621-3", Nov 14, 2015
特集機械工学年鑑14章機素潤滑設計14･2･2 ねじ，軸受，案内，シール

橋村真治

Journal of the Japan Society of Mechanical Engineers, 118(1161) 498-498, Aug 5, 2015
2A2-R06 Analysis of Mechanical Behavior of BZ Gels

OTSUKA Yuji, HASHIMURA Shinji, KATO Terukazu, MAEDA Shingo, HOSOYA Naoki

2015 "2A2-R06(1)"-"2A2-R06(2)", May 17, 2015
非鉄金属製ボルト締結体の疲労設計法の確立

橋村真治

特別教育・研究報告集, 117-120, 2015
実働状態における非鉄金属製ボルト締結体の疲労強度特性

橋村真治, 大津健史

特別教育・研究報告集, 288-291, 2015
W042003 Tightening Characteristics and Tightening Strength of Nonferrous Bolts

HASHIMURA Shinji

Mechanical Engineering Congress, Japan, 2014 "W042003-1"-"W042003-5", Sep 7, 2014
S1170202 An Influence of Tightening Speed on Tightening Characteristics of Nonferrous Bolts

HASHIMURA Shinji, MURATA Takuya, KOMATSU Kyoichi

Mechanical Engineering Congress, Japan, 2014 "S1170202-1"-"S1170202-4", Sep 7, 2014
S1170203 Effect of the Clamping Force on the Fatigue Strength of Nonferrous Bolts

TORII Tetsuya, OTSU Takefumi, HASHIMURA Shinji

Mechanical Engineering Congress, Japan, 2014 "S1170203-1"-"S1170203-5", Sep 7, 2014
特集機械工学年鑑 14章機素潤滑設計 14･2･2 ねじ，軸受，案内，シール

橋村真治

日本機械学会誌, 117(1149), Aug 1, 2014

Books and Other Publications

わかる！使える！ねじ入門

橋村真治

日刊工業新聞社, Jul 30, 2019 (ISBN: 9784526079870)
高強度ねじ締結の体系的計算方法

川井謙一, 萩原正弥, 橋村真治, 岡田学

Nov 22, 2018
トラブルを未然に防ぐ「ねじ設計法と保全対策」

橋村真治

Nov 8, 2014

Major Presentations

155

HIGH-SPEED JOINING METHOD USING SPIRAL NAIL

Shinji Hashimura, Kaito Yamashita, Shinji Takahara, Hiroto Morodomi

20th International Conference on Experimental Mechanics

Teaching Experience

2014 - Present

Machine elements (Shibaura Institute of Technology)
2014 - Present

Machine design (Shibaura Institute of Technology)
2013 - Present

Strength of materials (Shibaura Institute of Technology)
Apr, 2005 - Mar, 2013

Fracture mechanics (National Institute of Technology, Kurume College)
Apr, 2002 - Mar, 2013

Mechanics of materials (National Institute of Technology, Kurume College)
Apr, 1999 - Mar, 2007

Machine design (National Institute of Technology, Kurume College)

Professional Memberships

2005 - Present

Japan society of automotive engineers
2001 - Present

Society of Automotive Engineers
Apr, 1998 - Present

日本材料学会
1998 - Present

日本ねじ研究協会
1998 - Present

日本設計工学会
1996 - Present

日本機械学会

Works

Research Projects

リサイカブル高速打鋲接合の開発

科学研究費助成事業基盤研究(B), 基盤研究(B), 日本学術振興会, Apr, 2021 - Mar, 2024

橋村真治
ボルト締結部の締付け軸力と剛性の同時検出ハイブリッドレンチの開発

A-STEP, JST, Sep, 2018 - Aug, 2019
すぐばかさ歯車の低騒音化を実現するバレル形ねじ状砥石を用いた低コスト・高能率連続創成研削技術の開発

サポイン, 中部経済産業局, 2013 - 2018
軸直角方向微小振動を受けるボルト締結体のゆるみと疲労破壊に関する研究

科学研究費補助金若手研究(B), Apr, 2004 - Mar, 2005

橋村真治
自動車用インテリジェントホイールの開発

科学研究費補助金萌芽的研究, Apr, 2000 - Mar, 2001
ボルト締結体の締付け力検出法の開発

三豊科学技術振興協会, 2001

Industrial Property Rights

特表20210138594 NUT AND BOLT TIGHTENING METHOD AND TIGHTENING DEVICE

Tomohiro Ogata, Kyoichi Komatsu, Seiji Ito, Shinji Hashimura
特開2019-70533 引張装置用の補助部品
特許6501965 ボルト及びナットの締付け方法及び締付け装置
特開2019-39535 鋲打ち方法および鋲
特願2017-195520 被締結部材のばね定数の推定方法
特開2010-214486 工具の組立方法及び工具の組立装置
特開2008-95869 締付け力管理方法および締付け装置
特開2004-330342 ねじ類の締付け方法、及びそれに用いられる装置
特開2004-101246 ボルト・ナット締結体の締付け力検出方法

橋村真治, 村上敬宜
特開2003-254315 締結装置，ねじ装置および螺合部のゆるみ防止方法
特開2003-240655 ボルト・ナット締結体の締付け力検出方法
特許6532648 Apparatus for fixedly connecting threaded tubes, and recording medium storing control program

Yukitaka Murakami, Shinji Hashimura, Kazuya Mori
特許6385837 Method and apparatus for fixedly connecting threaded tubes, and recording medium storing control program for practicing or controlling those method and apparatus

Yukitaka Murakami, Shinji Hashimura, Kazuya Mori
特開2000-352484 管の締結方法，締結装置および管の締付けトルク管理プログラムを記録した記録媒体
特開9-207026 成形歯車研削砥石

Profile Information

Research Interests

Research Areas

Research History

Education

Committee Memberships

Awards

Papers

Misc.

Books and Other Publications

Major Presentations

Teaching Experience

Professional Memberships

Works

Research Projects

Industrial Property Rights

Menu

Coauthors