Kodama Shuhei

Profile Information

Affiliation: Associate Professor, Department of Mechanical Engineering, Tokyo City University

Degree: Ph.D.(Mar, 2019, Tohoku University)

J-GLOBAL ID: 201901004647068040
Researcher ID: AAU-8763-2020
researchmap Member ID: B000367423

Research Interests

Research Areas

Nanotechnology/Materials / Material fabrication and microstructure control /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Manufacturing and production engineering /

Research History

Apr, 2023 - Present

Associate Professor, Department of Mechanical Engineering, Tokyo City University
Apr, 2019 - Mar, 2023

Graduate School of Engineering Department of Mechanical Systems Engineering, Tokyo University of Agriculture and Technology

Education

Apr, 2016 - Mar, 2019

Department of Mechanical Systems Engineering, Graduate School of Engineering, Tohoku University
Apr, 2014 - Mar, 2019

Interdepartmental Doctoral Degree Program for Multi-dimensional Materials Science Leaders, Leading Graduate Schools, Tohoku University
Sep, 2017 - Dec, 2017

Department of Mechanical and Aerospace Engineering, College of Engineering, University of Florida
Apr, 2014 - Mar, 2016

Department of Mechanical Systems and Design, Graduate School of Engineering, Tohoku University
Apr, 2010 - Mar, 2014

Department of Mechanical and Aerospace Engineering, Faculty of Engineering, Tohoku University

Committee Memberships

Jun, 2023 - Present

先進テクノフェアATF2024実行委員, 砥粒加工学会
Apr, 2023 - Present

ICPE2024 Organizing Committee Member
Apr, 2023 - Present

2023年度/2024年度校閲委員会協力委員, 精密工学会
Apr, 2023 - Present

全国大会2023実行委員, 電気加工学会
Apr, 2023 - Present

実行委員, 精密加工研究会
Apr, 2021 - Present

企画委員会委員, 砥粒加工学会
Apr, 2021 - Present

広報・情報部会広報委員会委員, 精密工学会
Apr, 2020 - Present

アフィリエイト委員, 精密工学会
Apr, 2019 - Present

ナノ精度機械加工専門委員会委員, 精密工学会
Apr, 2019 - Mar, 2020

大会実行委員, 2020年度精密工学会春季大会実行委員会

Awards

Apr, 2023

日本機械学会奨励賞, 短パルスレーザ複合加工によるマイクロ・ナノ複合構造の創成の研究, 日本機械学会

小玉脩平
Mar, 2022

2022年度春季大会ベストプレゼンテーション賞, 液中レーザ照射によるナノ周期構造の創成と⾦属析出に対するパルス幅の影響, 精密工学会

小玉脩平
Mar, 2022

精密工学会沼田記念論文賞, Control of short-pulsed laser induced periodic surface structures with machining -picosecond laser nanotexturing with magnetic abrasive finishing-, 精密工学会

小玉脩平, 山口ひとみ, 嶋田慶太, 水谷正義, 厨川常元
May, 2021

優秀論文賞, Control of short-pulsed laser induced periodic surface structures with machining -picosecond laser nanotexturing with magnetic abrasive finishing-, 公益財団法人マザック財団

小玉脩平
Mar, 2019

工学研究科長賞, 東北大学

小玉脩平

Papers

Cu microprecipitation with electrolysis assisted short-pulsed laser irradiation in CuSO4 solution

Shuhei Kodama, Reo Yabuuchi, Wataru Natsu

Proceedings of 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022), 2022 Peer-reviewed
Effect of permeable mold and recovery of air-permeability of porous insert by electrochemical machining

Koharu Horikawa, Shuhei Kodama, Wataru Natsu, Kazuyoshi Oota

Proceedings of 18th International Symposium on Electrochemical Machining Technology 2022 (INSECT 2022), 2022 Peer-reviewed
Study on machining characteristics of titanium alloys in scanning ECM with electrolyte suction tool

Takahiro Inadama, Shuhei Kodama, Wataru Natsu

Proceedings of 19th International Conference on Precision Engineering, 2022 Peer-reviewed
Local copper precipitation with ultrashort-pulsed laser ablation in copper sulfate solution

Reo Yabuuchi, Shuhei Kodama, Godai Miyaji, Wataru Natsu

Proceedings of 19th International Conference on Precision Engineering, 2022 Peer-reviewed
Effect of tip shape of pipe electrode on accuracy in electrochemical machining of deep cooling holes

Kazuna Otani, Masako Sakamoto, Shuhei Kodama, Wataru Natsu

Proceedings of 19th International Conference on Precision Engineering, 2022 Peer-reviewed
Fabrication of nanostructure and deposition of metal particles by femtosecond laser ablation in electrolyte

Shuhei KODAMA, Reo YABUUCHI, Godai MIYAJI, Wataru NATSU

Procedia CIRP, 113 439-444, 2022 Peer-reviewed
Picosecond laser-induced nanopillar coverage of entire mirror-polished surfaces of Ti6Al4V alloy

Liwei Chen, Yifei Zhang, Shuhei Kodama, Shaolin Xu, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

Precision Engineering, 72 556-567, Nov, 2021 Peer-reviewed
Control of Straight Laser Induced Periodic Surface Structures on Aluminium alloy by Ultraprecision Cutting

Kosuke Oike, Shuhei Kodama, Keiichi Nakamoto, Yoshimi Takeuchi

Proceedings of 21st International Conference and Exhibition, 2021 Peer-reviewed
Characteristics of electrochemical machining by using electrolyte suction tool with auxiliary anode

Takafumi Tabata, Shuhei Kodama, Wataru Natsu, Guanxian Liu

Proceedings of 21st International Conference and Exhibition, 2021 Peer-reviewed
Effects of electrolytes on fine structures fabricated by hybrid process with shortpulsed laser and electrochemical machining

Shuhei Kodama, Wataru Natsu

Proceedings of 21st International Conference and Exhibition, 2021 Peer-reviewed
Characteristic investigation of electrochemical machining using quasi-solid electrolyte

Tamon Obe, Shuhei Kodama, Wataru Natsu

Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21), 2021 Peer-reviewed
Investigation of surface characteristics of porous materials processed with electrochemical machining

Koharu Horikawa, Kazuyoshi Ota, Shuhei Kodama, Wataru Natsu

Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21), 2021 Peer-reviewed
Influence of frequency and pulse duration on fabrication of periodic nanostructure by ultrashort-pulsed laser

Shuhei Kodama, Wataru Natsu

Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21), 2021 Peer-reviewed
Effects of electrolyte on laser-induced periodic surface structures with picosecond laser pulses

Kodama, S., Natsu, W.

Nanomaterials, 11(2) 327-327, 2021 Peer-reviewed
Simulation of edge-sagging phenomenon in electrochemical machining of cooling holes

Fuma Yada, Masako Sakamoto, Shuhei Kodama, Wataru Natsu

Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21), 2020 Peer-reviewed
Control of laser-induced periodic surface structures assisted by mechanical processing

Shuhei Kodama, Ryohei Takase, Keita Shimada, Masayoshi Mizutani, Tsunemoto Kuriyagawa

JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, 2020 Peer-reviewed
Fabrication of multiscale structure by hybrid process with short-pulsed laser and electrochemical machining

Shuhei Kodama, Wataru Natsu

Procedia CIRP, 95 875-878, 2020 Peer-reviewed
Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures

Kodama Shuhei, Shimada Keita, Mizutani Masayoshi, Kuriyagawa Tsunemoto

International Journal of Automation Technology, 14(4) 552-559, 2020 Peer-reviewed
Study on the Creation of Fine Periodic Structure on V-Shaped Groove with Short-Pulsed Laser

Takase Ryohei, Kodama Shuhei, Shimada Keita, Mescheder Holger, Winands Kai, Riepe Jan, Arntz Kristian, Mizutani Masayoshi, Kuriyagawa Tsunemoto

International Journal of Automation Technology, 14(4) 601-613, 2020 Peer-reviewed
Study on improvement of transfer accuracy in ECM of fine taper hole

Akihisa Uchida, Shuhei Kodama, Wataru Natsu

Proceedings of the 10th International Conference on Leading Edge Manufacturing in the 21st Century (LEM21), 2019 Peer-reviewed

Misc.

Multi-Scale Texturing and Surface Modification by Hybrid Ultrashort-Pulsed Laser Processing

KODAMA Shuhei, NATSU Wataru

JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 68(1) 15-20, 2023
電解加工におけるグラファイト電極消耗様子の観察と考察

大工真輝, 髙田哲平, 小玉脩平, 夏恒

精密工学会学術講演会講演論文集, 2022A 12-13, Aug 25, 2022
異なるパルス幅の超短パルスレーザによるナノ周期構造創成メカニズムの検討

小玉脩平, 夏恒

精密工学会学術講演会講演論文集, 2022A 414-415, Aug 25, 2022
Seiko Holdings Corporation

Journal of the Japan Society for Precision Engineering, 88(4) 336-337, Apr 5, 2022
冷却穴の電解加工における形状シミュレーション

矢田楓馬, 酒本昌子, 小玉脩平, 夏恒

精密工学会学術講演会講演論文集, 2022S 441-442, Mar 2, 2022
液中レーザ照射によるナノ周期構造の創成と金属析出に対するパルス幅の影響

小玉脩平, 夏恒

精密工学会学術講演会講演論文集, 2022S 634-635, Mar 2, 2022
切削加工と電解加工が多孔質金属材料の加工面特性に及ぼす影響

堀川古暖, 小玉脩平, 夏恒, 太田和良

電気加工学会全国大会（2022）講演論文集, 2022
Characteristics of ECM of difficult-to-cut materials by using electrolyte suction tool with auxiliary anode

Takahiro Inadama, Shuhei Kodama, Wataru Natsu

Proceedings of 7th Symposium on International Collaboration on Micro and Precision Electrical Machining, 2022
短パルスレーザ電解複合加工による複合構造の創成—Fabrication of hybrid structure by short-pulsed laser and electrochemical machining—特集難加工材の高度加工を実現する複合加工技術

小玉脩平, 夏恒

Abrasive technology : 砥粒加工学会誌 : journal of the Japan Society for Abrasive Technology, 65(12) 646-649, Dec, 2021
Fabrication of fine periodic structure and deposition of metal particles by femtosecond laser irradiation in electrolyte.

Yabuuchi Reo, Kodama Shuhei, Miyaji Godai, Natsu Wataru

Proceedings of JSPE Semestrial Meeting, 2021A 178-179, Sep 8, 2021
Research on machining sustainability of liquid region limited ECM with electrolyte absorption mechanism

Obe Tamon, Wang Jiankang, Kodama Shuhei, Natsu Wataru

Proceedings of JSPE Semestrial Meeting, 2021A 508-509, Sep 8, 2021
精密工学会アフィリエイト私の歩きはじめた道短パルスレーザと機械加工の複合加工による機能性表面の創成

小玉脩平

精密工学会誌 = Journal of the Japan Society for Precision Engineering / 会誌編集委員会編, 87(7) 625-628, Jul, 2021
機械加工援用短パルスレーザによる表面微細周期構造の創成と制御—Control of short-pulsed laser induced periodic surface structures with machining—第229回電気加工研究会

小玉脩平, 夏恒

電気加工技術, 44(137) 7-10, Feb 5, 2021
Effect of electrolyte concentration on metal particle deposition by femtosecond laser

Reo Yabuuchi, Shuhei Kodama, Wataru Natsu

Proceedings of 7th Symposium on International Collaboration on Micro and Precision Electrical Machining, 2020
Effects of pulse duration and electrolyte on hybrid process with short-pulsed laser and ECM

小玉脩平, 宮地悟代, 夏恒

精密工学会大会学術講演会講演論文集, 2020 196-197, 2020
Fabricating Hybrid Structure by Short-Pulsed Laser with ECM

小玉脩平, 夏恒

精密工学会大会学術講演会講演論文集, 2020 409-410, 2020
Development of High Functional Cutting Tool with Nanostructure Fabricated by Short Pulse Laser

FUKUI Kazuhiro, KODAMA Shuhei, SHIMIZU Kouhei, SHIMADA Keita, MIZUTANI Masayoshi, KURIYAGAWA Tsunemoto

The Proceedings of Mechanical Engineering Congress, Japan, 2018 S1320206, 2018
超短パルスレーザによる表面微細周期構造の創成

小栗健, 柴田章広, 小玉脩平, 嶋田慶太, 水谷正義, 厨川常元

精密工学会大会学術講演会講演論文集, 2014 173-174, 2014

Presentations

Nanostructure generation and metal deposition by short-pulsed laser ablation in electrolyte

Shuhei Kodama

The 6th International Symposium on Micro/Nano Mechanical Machining and Manufacturing, 2021 Invited
Effects of Pulse Duration and Heat on Laser-Induced Periodic Surface Structures

Shuhei Kodama

International Conference on Laser Materials Processing 2021, 2020 Invited
Fabrication of micro/nano structures by hybrid process with short-pulsed laser and machining

Shuhei Kodama

International Congress on Laser Advanced Materials Processing 2020, 2019 Invited
機械加工援用短パルスレーザ法と微細構造創成への応用

小玉脩平

2019年度精密工学会秋季大会シンポジウム「ピコ精度加工と機能創成加工が拓く高付加価値製造技術」, 2019 Invited
機械加工援用短パルスレーザによる構造の制御およびマルチスケール構造の創成

小玉脩平

精密加工研究会第103回例会, 2018 Invited
Control of Laser-Induced Periodic Surface Structures with Mechanical Processing

Shuhei Kodama

The China-Japan High-level Experts Symposiums on Intelligent Manufacturing, 2018 Invited
Effect of Crystal Orientation on Short Pulsed Laser-Induced Periodic Surface Structure

Shuhei KODAMA, Shinya SUZUKI, Akihiro SHIBATA, Keita SHIMADA, Masayoshi MIZUTANI, Tsunemoto KURIYAGAWA

The 5th International Symposium on Micro/Nano Mechanical Machining and Manufacturing (ISMNM 2018), 2018
Fabrication and control of fine periodic surface structures by short pulsed laser

Shuhei KODAMA, Keita SHIMADA, Masayoshi MIZUTANI, Tsunemoto KURIYAGAWA

JSPS-DST Asian Academic Seminar 2016, 2015
Materials effects on fine periodic surfaces structures fabricated by short pulsed laser

Shuhei KODAMA, Keita SHIMADA, Masayoshi MIZUTANI, Tsunemoto KURIYAGAWA

Joint Symposium on the MSE for the 21st Century, 2014

Teaching Experience

Oct, 2023 - Present

Surface Finishing, Adv. (Tokyo City University)
Oct, 2023 - Present

SD PBL(3) (東京都市大学)
Apr, 2023 - Present

環境と機械ゼミナール (東京都市大学)
Apr, 2023 - Present

材料加工学 (東京都市大学)
Apr, 2023 - Present

再・機械設計製図 (東京都市大学)
Apr, 2020 - Sep, 2022

工学基礎実験 (東京農工大学)
Apr, 2020 - Sep, 2022

機械システム工学実験III (東京農工大学)
Oct, 2019 - Mar, 2020

機械システム工学実験II (東京農工大学)

Professional Memberships

Oct, 2014 - Present

精密工学会
Apr, 2021 - Mar, 2023

レーザ加工学会
Aug, 2019

電気加工学会
Aug, 2015

日本機械学会

Research Projects

その場観察に基づく工具-被削材界面の摩擦現象の理解とその応用

プロジェクト研究, 公益財団法人工作機械技術振興財団, Oct, 2022 - Sep, 2025

杉原達哉, 道畑正岐, 岡田将人, 前川覚, 小玉脩平
Improvement of EDM speed for micro deep holes by constructing control system with consideration of bubble flushing effect

Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2022 - Mar, 2025
センサー・フュ−ジョンによる加工空間のインプロセス認識

プロジェクト研究, 公益財団法人工作機械技術振興財団, Oct, 2021 - Mar, 2024

笹原弘之, 岩見健太郎, 薄井雅俊, 小玉脩平, 水谷康弘, 金子新, 長谷亜蘭, 阿部壮志
難削材に対してマルチスケール構造を創成する短パルスレーザ電解複合加工の開発

科学研究費助成事業若手研究, 若手研究, 日本学術振興会, Apr, 2020 - Mar, 2023

小玉脩平
切削援用短パルスレーザによるマイクロ・ナノ複合構造の創成と制御

研究開発助成, 公益財団法人マザック財団, Apr, 2022 - Mar, 2023

小玉脩平
超短パルスレーザによる金属粒子析出過程の観察手法の確立

調査・研究事業に対する助成, 公益財団法人精密測定技術振興財団, Apr, 2022 - Mar, 2023

小玉脩平
機械加工援用短パルスレーザによるマルチスケール構造の創成

一般研究開発助成, 公益財団法人大澤科学技術振興財団, Oct, 2020 - Sep, 2021

小玉脩平, 中本圭一
短パルスレーザによる機能性インターフェースの創成

リーディングプログラム研究支援, 東北大学, Apr, 2014 - Mar, 2015

小玉脩平

Profile Information

Research Interests

Research Areas

Research History

Education

Committee Memberships

Awards

Papers

Misc.

Presentations

Teaching Experience

Professional Memberships

Research Projects

Menu

Coauthors