Yoshihiko Arao

Profile Information

Affiliation: 准教授, 理工学術院, 早稲田大学

Degree: 博士（工学）(早稲田大学)

J-GLOBAL ID: 200901024713008472
researchmap Member ID: 6000000433

Research Interests

Research Areas

Nanotechnology/Materials / Structural and functional materials /
Nanotechnology/Materials / Composite materials and interfaces /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Transfer phenomena and unit operations /
Manufacturing technology (mechanical, electrical/electronic, chemical engineering) / Machine materials and mechanics /

Research History

Apr, 2020 - Present

Associate Professor, Faculty of Science and Engineering, Waseda University
Apr, 2015 - Mar, 2020

School of Materials and Chemical Technology, Tokyo Institute of Technology
Apr, 2011 - Mar, 2015

Faculty of Science and Engineering, Doshisha University
Apr, 2010 - Mar, 2011

School of Fundamental Science and Engineering, Waseda University

Education

Apr, 2006 - Mar, 2010

Waseda University
Apr, 2004 - Apr, 2006

Waseda University
Apr, 2000 - Mar, 2004

School of Science and Engineering, Waseda University

Papers

New Approach to Recycling of Epoxy Resins Using Nitric Acid: Regeneration of Decomposed Products through Hydrogenation

Takuma Hanaoka, Yoshihiko Arao, Yoshihito Kayaki, Shigeki Kuwata, Masatoshi Kubouchi

ACS Sustainable Chemistry & Engineering, 9(37) 12520-12529, Sep 20, 2021
The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

Kazushi Shibutani, Jun Nakai, Ketkanok Aphichartsuphapkhajorn, Yoshihito Kayaki, Shigeki Kuwata, Yoshihiko Arao, Masatoshi Kubouchi

Journal of Applied Polymer Science, 138(17), May 5, 2021
Analysis of nitric acid decomposition of epoxy resin network structures for chemical recycling

Takuma Hanaoka, Yoshihiko Arao, Yoshihito Kayaki, Shigeki Kuwata, Masatoshi Kubouchi

Polymer Degradation and Stability, 186, Apr, 2021
Exfoliation behavior of large anionic graphite flakes in liquid produced by salt-assisted ball milling

Yoshihiko Arao, Jonathon D. Tanks, Kojiro Aida, Masatoshi Kubouchi

Processes, 8(1), Jan 1, 2020
Enhancing mechanical properties of graphene / epoxy nanocomposites using few-layer graphene produced by liquid phase exfoliation

K. Oba, Y. Arao, A. Hosoi, H. Kawada

ECCM 2018 - 18th European Conference on Composite Materials, 2020
Application of small punch test to lifetime prediction of plasticized polyvinyl chloride wire

Yasutomo Koga, Yoshihiko Arao, Masatoshi Kubouchi

Polymer Degradation and Stability, 171, Jan, 2020
Experimental investigation on drilling of natural flax fiber-reinforced composites

H. Rezghi Maleki, M. Hamedi, M. Kubouchi, Y. Arao

Materials and Manufacturing Processes, 34(3) 283-292, Feb 17, 2019
Mass production of low-boiling point solvent- and water-soluble graphene by simple salt-assisted ball milling

Yoshihiko Arao, Riichi Kuwahara, Kaoru Ohno, Jonathon Tanks, Kojiro Aida, Masatoshi Kubouchi, Shin-ichi Takeda

Nanoscale Advances, 1(12) 4955-4964, 2019
Evaluation of electrical properties of transparent conductive film prepared using graphene - supported Ag

OBA Keisuke, SAKAGUCHI Daiki, ARAO Yoshihiko, HOSOI Atsushi, KAWADA Hiroyuki

The Proceedings of Mechanical Engineering Congress, Japan, 2017 G0400103, 2017
Influence of fiber diameter on impact tensile properties of injection-molded long glass fiber reinforced polyamide

OZAWA Kento, KIM Tae Sung, TSUNODA Daichi, ARAO Yoshihiko, TANIGUCHI Norihiko, NISHIWAKI Tsuyoshi, HOSOI Atsushi, KAWADA Hiroyuki

Transactions of the JSME (in Japanese), 2016
Manufacturing and characterization of graphene transparent conductive films by using liquid phase exfoliation

SAKAGUCHI Daiki, ARAO Yoshihiko, HOSOI Atsushi, KAWADA Hiroyuki

The Proceedings of the Materials and processing conference, 2016 415-415, 2016
High Accurate Space Telescope Mirror Made by Light and Thermally Stable CFRP

KOYANAGI Jun, ARAO Yoshihiko, UTSUNOMIYA Shin, TAKEDA Shin-ichi, KAWADA Hiroyuki

JSMME, 4(11) 1540-1549, 2010
Residual Stress Relaxation in CFRP Cross-ply Laminate

ARAO Yoshihiko, KOYANAGI Jun, OKUDOI Yukie, OTSUKA Masanori, KAWADA Hiroyuki

JSMME, 4(11) 1595-1604, 2010
Deformation Behavior of CFRP Cross-Poly Laminate in Hot and Humid Environment

ARAO Yoshihiko, KOYANAGI Jun, UTSUNOMIYA Shin, TERADA Hiroshi, KAWADA Hiroyuki

Journal of the Japan Society for Composite Materials, 35(6) 241-247, Nov 15, 2009
S0406-1-2 Effect of Thermal Residual Stress Relaxation on the Geometrical Changing Process in Unsymmetrical CFRP Laminate

OKUDOI Yukie, ARAO Yoshihiko, KAI Takeshi, KAWADA Hiroyuki

The proceedings of the JSME annual meeting, 2009 325-326, 2009
Dimensional Change of CFRP Taking Account of Moisture Concentration

ARAO Yoshihiko, KOYANAGI Jun, HATTA Hiroshi, KAWADA Hiroyuki

Journal of the Japan Society for Composite Materials, 34(3) 95-101, May 15, 2008
2751 Effect of moisture absorption on dimensional and geometrical variation in CFRP

Arao Yoshihiko, Koyanagi Jun, Kawada Hiroyuki

The proceedings of the JSME annual meeting, 2007 663-664, 2007
418 Time-temperature dependency of microscopic-scale deformation in CFRP

TAKAKU Hiroyuki, ARAO Yoshihiko, KOYANAGI Jun, KAWADA Hiroyuki, ISHIDA Yuichi

The Proceedings of the Materials and processing conference, 2006 251-252, 2006

Misc.

Mechanochemical reaction using weak acid salts enables dispersion and exfoliation of nanomaterials in polar solvents

Yoshihiko Arao, Jonathon Tanks, Kojiro Aida, Masatoshi Kubouchi

Journal of Materials Science, 54(6) 4546-4558, Mar 30, 2019
Experimental study on drilling of jute fiber reinforced polymer composites

Hadi Rezghi Maleki, Mohsen Hamedi, Masatoshi Kubouchi, Yoshihiko Arao

Journal of Composite Materials, 53(3) 283-295, Feb 1, 2019
Direct exfoliation of layered materials in low-boiling point solvents using weak acid salts

Yoshihiko Arao, Jonathon, D. Tanks, Masatoshi Kubouchi, Akira Ito, Atsushi Hosoi, Hiroyuki Kawada

Carbon, 142 261-268, Feb 1, 2019
Influence of network structure on the degradation of poly(ether)amine-cured epoxy resins by inorganic acid

Jonathon D. Tanks, Masatoshi Kubouchi, Yoshihiko Arao

Polymer Degradation and Stability, 157 153-159, Nov 1, 2018
Effect of graphite structures on the productivity and quality of few-layer graphene in liquid-phase exfoliation

Fumiya Mori, Masatoshi Kubouchi, Yoshihiko Arao

Journal of Materials Science, 53(18) 12807-12815, Sep 1, 2018
Simultaneous sound velocity and thickness measurement by the ultrasonic pitch-catch method for corrosion-layer-forming polymeric materials

Masahiro Kusano, Shota Takizawa, Tetsuya Sakai, Yoshihiko Arao, Masatoshi Kubouchi

ULTRASONICS, 82 178-187, Jan, 2018
Diffusion kinetics, swelling, and degradation of corrosion-resistant C-glass/epoxy woven composites in harsh environments

Jonathon D. Tanks, Yoshihiko Arao, Masatoshi Kubouchi

Composite Structures, 202 686-694, 2018
Degradation behavior and lifetime estimation of fiber reinforced plastics tanks for hydrochloric acid storage

Masahiro Kusano, Takafumi Kanai, Yoshihiko Arao, Masatoshi Kubouchi

ENGINEERING FAILURE ANALYSIS, 79 971-979, Sep, 2017
Efficient solvent systems for improving production of few-layer graphene in liquid phase exfoliation

Yoshihiko Arao, Fumiya Mori, Masatoshi Kubouchi

CARBON, 118 18-24, Jul, 2017
Mass production of high-aspect-ratio few-layer-graphene by high-speed laminar flow

Yoshihiko Arao, Yoshinori Mizuno, Kunihiro Araki, Masatoshi Kubouchi

CARBON, 102 330-338, Jun, 2016
Composites and Nanocomposites Based on Renewable and Sustainable Materials

Matheus Poletto, Heitor Luiz Ornaghi Junior, P. M. Visakh, Yoshihiko Arao

INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2016, 2016
High-rate production of few-layer graphene by high-power probe sonication

Yoshihiko Arao, Masatoshi Kubouchi

CARBON, 95 802-808, Dec, 2015
Dimensional stability of epoxy-based and cyanate-based carbon fiber-reinforced plastics

Yoshihiko Arao, Taro Fukui, Tomoyuki Niwa, Hiroyuki Kawada

JOURNAL OF COMPOSITE MATERIALS, 49(12) 1483-1492, May, 2015
Dispersion effect of extensional flow for PP/CNT nano-composite with Blister Disk of twin screw extruder

K. Matsumoto, T. Morita, Y. Arao, T. Tanaka

Annual Technical Conference - ANTEC, Conference Proceedings, 993-997, Jan 1, 2015
Optimized design of strengthening structure with hat-shaped cross-section by carrying out buckling test

Keiko Natori, Kanchi Katanoda, Yuki Hashimoto, Yoshihiko Arao, Tatsuya Tanaka

Key Engineering Materials, 627 61-64, 2015
Effect of screw design on fiber breakage and dispersion in injection-molded long glass-fiber-reinforced polypropylene

Akira Inoue, Kazuya Morita, Tatsuya Tanaka, Yoshihiko Arao, Yasutake Sawada

JOURNAL OF COMPOSITE MATERIALS, 49(1) 75-84, Jan, 2015
Study on recycling carbon fibre thermoplastic prepreg waste

M. Kawashima, K. Okuyama, Y. Arao, T. Tanaka, M. Tomioka, T. Ishikawa

ICCM International Conferences on Composite Materials, 2015-July, Jan 1, 2015
Strain rate dependent tensile properties of injection molded long glass fiber reinforced thermoplastics

Taesung Kim, Yoshihiko Arao, Norihiko Taniguchi, Tsuyoshi Nishiwaki, Atsushi Hosoi, Hiroyuki Kawada

ICCM International Conferences on Composite Materials, 2015-July, Jan 1, 2015
Strength improvement in injection-molded jute-fiber-reinforced polylactide green-composites

Yoshihiko Arao, Takayasu Fujiura, Satoshi Itani, Tatsuya Tanaka

COMPOSITES PART B-ENGINEERING, 68 200-206, Jan, 2015
The Improvement in Functional Characteristics of Eco-friendly Composites Made of Natural Rubber and Cellulose

Kunihiro Araki, Shonosuke Kaneko, Koki Matsumoto, Asahiro Nagatani, Tatsuya Tanaka, Yoshihiko Arao

PROCEEDINGS OF PPS-30: THE 30TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY, 1664, 2015

Books and Other Publications

高分子の残留応力対応

荒尾与史彦 (Role: Contributor)

技術情報協会, 2017
エポキシ樹脂の〇〇化/機能性の向上

荒尾与史彦 (Role: Contributor)

サイエンス＆ナノテクノロジー, 2016
Thermal degradation of polymer blends, composites and nanocomposites

ARAO Yoshihiko (Role: Editor)

Springer, 2015
Flame retardnts: Polymer blends, composites and nancomposites

ARAO Yoshihiko (Role: Editor)

Springer, 2015

Teaching Experience

Professional Memberships

Research Projects

ナノ素材を用いた循環型機械材料の創成

科学研究費助成事業, 基盤研究(A), 日本学術振興会, Apr, 2022 - Mar, 2025

荒尾与史彦, 川田宏之, タンクスジョナサンデビッド
Producing high strenght and durable nanocomposites using soluble graphene

Grants-in-Aid for Scientific Research Grant-in-Aid for Scientific Research (B), Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2019 - Mar, 2022

Arao Yoshihiko
Creation of nano spatial structure on metal surface and development of direct bonding technology for dissimilar materials

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2018 - Mar, 2021

Hosoi Atsushi
Development and high strength of non-twisted CNT fiber reinforced composite material by innovative synthetic method

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2018 - Mar, 2021

Kawada Hiroyuki
Fabrication of innovative carbon nanotube metal composite wiring material with large current capacity

Grants-in-Aid for Scientific Research, Grant-in-Aid for Challenging Research (Exploratory), Japan Society for the Promotion of Science, Jun, 2018 - Mar, 2020

Kawada Hiroyuki
Development of mass production process of graphene and fabrication of high strenght nanocomposites

Grants-in-Aid for Scientific Research, Grant-in-Aid for Young Scientists (A), Japan Society for the Promotion of Science, Apr, 2015 - Mar, 2018

Arao Yoshihiko
Development of Innovative Ultra-Light Weighted and High Strength Composite using Densified Untwisted CNT

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2015 - Mar, 2018

KAWADA HIROYUKI
黒鉛の構造制御によるグラフェンの低コスト量産化

フジクラ財団研究助成, 2017 - 2018

荒尾与史彦
グラフェンの量産化と超高強度複合材料の創製

科研費若手A, 2015 - 2018

荒尾与史彦
液相プロセスにおける超高アスペクト比ナノシートの創製

ホソカワ粉体工学振興財団研究助成, 2017 - 2017

荒尾与史彦
Fabrication of Hierarchical Composite Reinforced with CNT Deposited Fiber and Interfacial Evaluation, and Impact, Fatigue Properties

Grants-in-Aid for Scientific Research, Grant-in-Aid for Scientific Research (B), Japan Society for the Promotion of Science, Apr, 2012 - Mar, 2015

KAWADA HIROYUKI, HOSOI Atsushi, ARAO Yoshihiko
ナノコーティングによる先進複合材料の超長寿命化

科研費若手B, 2012 - 2015

荒尾与史彦
-

Industrial Property Rights

特願2018-033385 無機粒子複合体およびその製造方法、並びに無機粒子複合体分散液

荒尾与史彦
特願2017-198450 高分散性ナノシートとその製造方法

荒尾与史彦
特願2016-198182 材料試験装置及び材料試験方法

荒尾与史彦
特願2016-28521 材料層の厚み測定方法

荒尾与史彦
特願2015-170985 圧力式ホモジナイザを利用した高せん断付与による層状鉱物の剥離分散

荒尾与史彦
特願2015-139592 熱溶解積層型3次元プリンタ用フィラメントおよびその製造方法

荒尾与史彦
特願2013-003073 樹脂組成物

荒尾与史彦

Profile Information

Research Interests

Research Areas

Research History

Education

Papers

Misc.

Books and Other Publications

Teaching Experience

Professional Memberships

Research Projects

Industrial Property Rights

Menu

Coauthors